My Cart
Total:0Sub-Total : $0.00
Image Part Manufacturer Description Stock Action
TS921IDT Klein Tools, Inc.

TS921IDT Overview


Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 3V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 1mA and 10 . You should keep the voltage gain at 90.88dB for the time being. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The total number of elements in this buffer amplifier is 1. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.

TS921IDT Features


8 Pins
supply voltage of 3V
90.88dB voltage gain
Output Type: Rail-to-Rail

TS921IDT Applications


There are a lot of STMicroelectronics TS921IDT Instrumentational OP Amps applications.

  • Video conversion and routing
  • Differentiator circuits
  • Measurements of Wheatstone bridge
  • Exponential operation circuits
  • Ultrasound transducers
  • Automation control systems
  • Multiplication circuits
  • Communication
  • Digital cameras
  • Commercial audio systems
999
In-stock
Get Quote
TS922IDT Klein Tools, Inc. <h3>TS922IDT Overview</h3><div><br/>The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. &nbsp;As far as the packaging is concerned, buffer op amp is delivered in a Tape &amp; Reel (TR) case. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 3mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 2mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. &nbsp;This op amp contains 2 circuits. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. A temperature greater than 125°C should not be used for the operation of this instrumentation amplifier. The linear amplifier consists of 2 different elements in total. To run supply current of buffer amplifier under 2mA. &nbsp;I would like to point out that this electrical component is capable of working from a voltage below 12V as far as the power supply is concerned. To keep the buffer amps&#39; supply voltage higher than 2.7V. &nbsp;The linear amplifier has 2 amplifiers. <br/><br/></div><h3>TS922IDT Features</h3><div><br/>106.02dB voltage gain<br/>Output Type: Rail-to-Rail<br/><br/></div><h3>TS922IDT Applications</h3><div><br/>There are a lot of STMicroelectronics TS922IDT Instrumentational OP Amps applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>Power transmission<!--<li--></li><li>Communication<!--<li--></li><li>Video data acquisition<!--<li--></li><li>Computer workstations<!--<li--></li><li>Home audio systems<!--<li--></li><li>Measurements of Wheatstone bridge<!--<li--></li><li>earphone<!--<li--></li><li>Professional videography<!--<li--></li><li>Weighing systems<!--<li--></li><li>Video conversion and routing<!--<li--></li></ul>
999
In-stock
Get Quote
LM158DT Klein Tools, Inc.

LM158DT Overview


Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 2mV. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -55°C~125°C , which is a good operating temperature. Using an 700μA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 100dB at all times. There are a total of 2 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 15V voltage. The linear amplifier is packaged by using a TAPE AND REEL axis.

LM158DT Features


8 Pins
supply voltage of 5V
100dB voltage gain

LM158DT Applications


There are a lot of STMicroelectronics LM158DT Instrumentational OP Amps applications.

  • Home audio systems
  • Video conversion and routing
  • Thermocouples
  • MP3
  • Strain gauges
  • Automotive sensors
  • Wireless base stations
  • Fission chambers
  • Signal amplification
  • Differentiator circuits
999
In-stock
Get Quote
TSV524IQ4T Klein Tools, Inc.

TSV524IQ4T Description


Operational amplifiers in the TSV52x and TSV52xA series offer low voltage operation with rail-to-rail input and output. With pinouts compliant with industry standards, the TSV521 device is the single version, the TSV522 device is the dual version, and the TSV524 device is the quad version.

The 1.15 MHz gain bandwidth product and 45 A at 5 V power consumption of the TSV52x and TSV52xA series provide an exceptional speed/power consumption ratio. The gadgets come in the tiniest industrial containers. The TSV52x, TSV52xA series is the best choice for sensor interfaces, battery-powered, and portable applications because of these capabilities. Their employment in demanding automotive applications is made easier by their wide temperature range and good ESD endurance.



TSV524IQ4T Features


  • Gain bandwidth product: 1.15 MHz typ. at 5 V

  • Low power consumption: 45 μA typ. at 5 V

  • Rail-to-rail input and output

  • Low input bias current: 1 pA typ.

  • Supply voltage: 2.7 to 5.5 V

  • Low offset voltage: 800 μV max.

  • Unity gain stable on 100 pF capacitor

  • Automotive grade



TSV524IQ4T Applications


  • Battery powered applications

  • Portable devices

  • Automotive signal conditioning

  • Active filtering

  • Medical instrumentation


999
In-stock
Get Quote
TLV2231CDBVR Ultralife
11
In-stock
Get Quote
LMV342MM/NOPB Ultralife

LMV342MM/NOPB Overview


Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. 116dB should be the voltage gain. Instrumentation amplifier has 2 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. An buffer amplifier is packed in a TR-shape according to the design. To run supply current of buffer amplifier under 107μA.

LMV342MM/NOPB Features


8 Pins
supply voltage of 2.7V
116dB voltage gain
Output Type: Rail-to-Rail

LMV342MM/NOPB Applications


There are a lot of Texas Instruments LMV342MM/NOPB Instrumentational OP Amps applications.

  • Hand-held batteries
  • Home audio systems
  • PDA
  • Fast A/D and D/A converters
  • Professional videography
  • Oscilloscopes
  • Television broadcasting equipment
  • Band-stop filter
  • Mobile phone
  • Signal filtering
999
In-stock
Get Quote
TSC888CILT Klein Tools, Inc.
152
In-stock
Get Quote
TLE2022ACDR Ultralife

TLE2022ACDR Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 400μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Operational amplifier can operate supply current at 550μA. 123.52dB should remain the voltage gain. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 20V. A TR-shaped amplifier is used to pack the buffer amps. Buffer op amp series numbers are indicated by the Excalibur?.

TLE2022ACDR Features


8 Pins
supply voltage of 15V
123.52dB voltage gain

TLE2022ACDR Applications


There are a lot of Texas Instruments TLE2022ACDR Instrumentational OP Amps applications.

  • Fission chambers
  • E-book readers
  • Computer workstations
  • Automation control systems
  • Semiconductor detectors
  • Test and measurement instruments
  • Commercial audio systems
  • MP3
  • pH (acidity)
  • Television
999
In-stock
Get Quote
LMP2231BMFE/NOPB Ultralife

LMP2231BMFE/NOPB Overview


In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 5 terminations. Linear amplifier has a total of 5 pins. Please take in mind that op amp should be run at 1.8V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 5 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 10μA . There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. TR is adopted to pack the instrumentation amplifier. This buffer amplifier is assigned within the LMP?, PowerWise? series by its manufacturer.

LMP2231BMFE/NOPB Features


5 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail

LMP2231BMFE/NOPB Applications


There are a lot of Texas Instruments LMP2231BMFE/NOPB Instrumentational OP Amps applications.

  • Blood pressure sensors
  • Gaming industry
  • High gain DC amplifier
  • Strain gauges
  • Mobile phone
  • Hand-held batteries
  • Oscilloscopes
  • Weak signal detection
  • Portable electronic products powered by batteries
  • Power transmission
999
In-stock
Get Quote
OPA4171AIPWR Ultralife

OPA4171AIPWR Overview


Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 18V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 250μV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 475μA, this op amp ic can operate. Maintain 130dB as the voltage gain. The op amp ic has 4 channels on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 18V. A TR-shaped amplifier is used to pack the buffer amps.

OPA4171AIPWR Features


14 Pins
supply voltage of 18V
130dB voltage gain
Output Type: Rail-to-Rail

OPA4171AIPWR Applications


There are a lot of Texas Instruments OPA4171AIPWR Instrumentational OP Amps applications.

  • Automatic control
  • Image computer boards
  • Micro signal measurement
  • Computer workstations
  • Thermocouples
  • Industrial applications including automation
  • Biopotential
  • Signal operation
  • High/low-pass filter circuit
  • High input resistance broadband
999
In-stock
Get Quote
INA148UA/2K5G4 Ultralife

INA148UA/2K5G4 Overview


It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are Differential types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Using an 260μA supply current, this operational amplifier ics can be operated. There are 1 circuits on this op amp. As a result of this, the buffer amplifier is packed in TR. 600μA quiescent currents are flowing through buffer op amp.

INA148UA/2K5G4 Features


8 Pins
supply voltage of 5V

INA148UA/2K5G4 Applications


There are a lot of Texas Instruments INA148UA/2K5G4 Instrumentational OP Amps applications.

  • Mobile phone
  • Proportional operation circuits
  • Portable media players
  • Gaming industry
  • Signal filtering
  • Television broadcasting equipment
  • Test and measurement instruments
  • Differentiator circuits
  • Navigation
  • Multiplication circuits
999
In-stock
Get Quote
OPA1662AID Ultralife

OPA1662AID Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 500μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 1.5mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 100dB. On the buffer amps, there are 2 channels that can be used. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. SoundPlus? corresponds to the op amp's series.

OPA1662AID Features


8 Pins
supply voltage of 15V
100dB voltage gain
Output Type: Rail-to-Rail

OPA1662AID Applications


There are a lot of Texas Instruments OPA1662AID Instrumentational OP Amps applications.

  • Inverse/same-phase proportional circuit
  • Displayers for aircraft and air transportation control systems
  • High gain DC amplifier
  • Precision measurement
  • Broadcasting
  • Fission chambers
  • Logarithmic operation circuits
  • Division circuits
  • Image computer boards
  • MP3
999
In-stock
Get Quote
OPA2131UA/2K5 Ultralife

OPA2131UA/2K5 Overview


Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using a supply current of 1.5mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 110dB. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The linear amplifier is packaged by using a TR axis.

OPA2131UA/2K5 Features


8 Pins
supply voltage of 15V
110dB voltage gain

OPA2131UA/2K5 Applications


There are a lot of Texas Instruments OPA2131UA/2K5 Instrumentational OP Amps applications.

  • Professional videography
  • Signal amplification
  • High input resistance broadband
  • Digital cameras
  • earphone
  • High-frequency data acquisition systems
  • Power transmission
  • Portable media players
  • Portable docking station
  • PDA
999
In-stock
Get Quote
LT1014DDWR Ultralife

LT1014DDWR Overview


A 16-SOIC (0.295, 7.50mm Width) case is used to package the op amp. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 16. Linear amplifier has a total of 16 pins. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 16 pins. Op amp ic rates 200μV for input offset voltage. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. A supply current of 350μA can be used to operate this linear amplifier. 120dB should remain the voltage gain. There is a rating of 4 for the operating supply voltage of the buffer op amp. The operating supply voltage of the buffer op amp is rated at 22V. It is used TR to pack the op amps.

LT1014DDWR Features


16 Pins
supply voltage of 15V
120dB voltage gain

LT1014DDWR Applications


There are a lot of Texas Instruments LT1014DDWR Instrumentational OP Amps applications.

  • Information processing
  • Automotive sensors
  • Car stereo
  • Laptop
  • pH (acidity)
  • Image computer boards
  • Portable media players
  • Thermocouples
  • Power transmission
  • Precision measurement
999
In-stock
Get Quote
OPA2836IRMCT Ultralife

OPA2836IRMCT Overview


The linear amplifier is packaged in a 10-UFQFN case. Voltage Feedback-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 10h termination of the year. In total, there are 10 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 10 pins. There is an input offset voltage of 65μV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using an 1mA supply current, this operational amplifier ics can be operated. 122dB should remain the voltage gain. In total, there are 2 circuits on this buffer amplifier. On the output type, there are Rail-to-Rail different types of op amps. An buffer amplifier is packed in a TR-shape according to the design.

OPA2836IRMCT Features


10 Pins
supply voltage of 2.7V
122dB voltage gain
Output Type: Rail-to-Rail

OPA2836IRMCT Applications


There are a lot of Texas Instruments OPA2836IRMCT Instrumentational OP Amps applications.

  • Wireless base stations
  • Thermocouples
  • Logarithmic operation circuits
  • Commercial audio systems
  • Strain gauges
  • Video conversion and routing
  • Active probe
  • Radar
  • Television
  • Switching amplifier
999
In-stock
Get Quote
THS4032IDGNR Ultralife

THS4032IDGNR Overview


Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. Buffer amps of this type are called Voltage Feedback-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 8 pins. Op amp ic rates 2mV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Operational amplifier can operate supply current at 8.5mA. 95dB should be the voltage gain. A total of 2 elements are present in this linear amplifier. For packing the buffer amplifier, the TR-axis is adopted.

THS4032IDGNR Features


8 Pins
supply voltage of 15V
95dB voltage gain

THS4032IDGNR Applications


There are a lot of Texas Instruments THS4032IDGNR Instrumentational OP Amps applications.

  • Digital cameras
  • Automation control systems
  • Industrial control system
  • Weak signal detection
  • Oscilloscopes
  • Signal operation
  • Scintillation detectors
  • Weighing systems
  • Video data acquisition
  • Hand-held batteries
999
In-stock
Get Quote
INA2133U Ultralife
6505
In-stock
Get Quote
INA141UA Ultralife
23180
In-stock
Get Quote
INA141U Ultralife
4897
In-stock
Get Quote
IVC102U Ultralife

IVC102U Overview


The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Transimpedance type. Instrumentation amplifier is delivered in a Tube case. During the past two weeks, there have been close to 14 terminations. In total, there are 14 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 15V battery. The op amp ic has an array of 14 pins on it. Regarding input offset voltage, op amp rates 500μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 4.1mA . There are 1 channels on the operational amplifiers. A voltage rating of 1 is indicated for the op amp's operating supply voltage. The operating supply voltage of the buffer op amp is rated at 15V. Besides the analog ICs used in this instrumentation amplifier, there is also another type of analog IC called ANALOG CIRCUIT IC.

IVC102U Features


14 Pins
supply voltage of 15V

IVC102U Applications


There are a lot of Texas Instruments IVC102U Instrumentational OP Amps applications.

  • Digital cameras
  • pH (acidity)
  • Scintillation detectors
  • Mobile phone
  • Division circuits
  • Test and measurement instruments
  • Multiplication circuits
  • Radiation thermometry transducers
  • Laptop
  • Portable docking station
999
In-stock
Get Quote
INA121U Ultralife
15559
In-stock
Get Quote
LM2904DT Klein Tools, Inc.

LM2904DT Overview


Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 8 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 7mV. For this electronic part, it is recommended that you mount it with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 700μA . It is a member of the 100dB's 100dB family. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of the buffer op amp is rated at 15V. An buffer amplifier is packed in a TR-shape according to the design.

LM2904DT Features


8 Pins
supply voltage of 5V
100dB voltage gain

LM2904DT Applications


There are a lot of STMicroelectronics LM2904DT Instrumentational OP Amps applications.

  • Portable electronic products powered by batteries
  • Fission chambers
  • High/low-pass filter circuit
  • Semiconductor detectors
  • Strain gauges
  • Automotive sensors
  • Signal operation
  • Polarized electrodes
  • High-frequency data acquisition systems
  • Portable docking station
999
In-stock
Get Quote
LM2902DR Ultralife

LM2902DR Overview


There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. The op amp is delivered to you in a Cut Tape (CT) case. We are approaching the 14h termination of the year. In this case, there are 14 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 14 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 7mV. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureThe buffer amplifier is capable of operating from a supply current of 1.4mA . Maintain 100dB as the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. The operating supply voltage of instrumentation amplifier is rated 13V voltage. The instrumentation amplifier is packed in the form of TR.

LM2902DR Features


14 Pins
supply voltage of 5V
100dB voltage gain

LM2902DR Applications


There are a lot of Texas Instruments LM2902DR Instrumentational OP Amps applications.

  • Logarithmic operation circuits
  • Cinema or auditorium audio system
  • Commercial audio systems
  • Oscilloscopes
  • Professional videography
  • Test equipment
  • Band-pass filter
  • Weak signal detection
  • Thermocouples
  • Radar
999
In-stock
Get Quote
LM2904ST Klein Tools, Inc.
12025
In-stock
Get Quote
LM2902PT Klein Tools, Inc.

LM2902PT Overview


In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. Buffer amplifier has a total of 14 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 14 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 7mV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. An 1.5mA volt supply current is needed for this linear amplifier to operate. 100dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. The operating supply voltage of instrumentation amplifier is rated 15V voltage. TAPE AND REEL is adopted to pack the instrumentation amplifier.

LM2902PT Features


14 Pins
supply voltage of 5V
100dB voltage gain

LM2902PT Applications


There are a lot of STMicroelectronics LM2902PT Instrumentational OP Amps applications.

  • Ultrasound transducers
  • Blood pressure sensors
  • Information processing
  • Video data acquisition
  • Tablets
  • Subtraction operation circuits
  • Television
  • Strain gauges
  • Medical instruments
  • Scintillation detectors
999
In-stock
Get Quote
LM358ADT Klein Tools, Inc.

LM358ADT Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 1mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 700μA . 100dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of the buffer op amp is rated at 15V. The instrumentation amplifier is packed in the form of TAPE AND REEL.

LM358ADT Features


8 Pins
supply voltage of 5V
100dB voltage gain

LM358ADT Applications


There are a lot of STMicroelectronics LM358ADT Instrumentational OP Amps applications.

  • Weighing systems
  • Broadcasting
  • Video data acquisition
  • Professional videography
  • Thermocouples
  • Radiation thermometry transducers
  • Automotive sensors
  • Proportional operation circuits
  • Switching amplifier
  • Precision measurement
999
In-stock
Get Quote
LM324APT Klein Tools, Inc.
3985
In-stock
Get Quote
LMV321LICT Klein Tools, Inc.

LMV321LICT Overview


There is a 5-TSSOP, SC-70-5, SOT-353 case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 5 terminations. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 5 pins on this chip. Regarding input offset voltage, buffer amplifier rates 1mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. This op amp can operate from a supply current at 130μA. Op amp is a member of the 100dB's 100dB family. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. The linear amplifier is packaged by using a TAPE AND REEL axis.

LMV321LICT Features


supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail

LMV321LICT Applications


There are a lot of STMicroelectronics LMV321LICT Instrumentational OP Amps applications.

  • Medical instruments
  • Division circuits
  • Laptop
  • Fast A/D and D/A converters
  • Weighing systems
  • Scintillation detectors
  • High input resistance broadband
  • Measurements of Wheatstone bridge
  • Inverse/same-phase proportional circuit
  • High speed sample
999
In-stock
Get Quote
TL062CDT Klein Tools, Inc.

TL062CDT Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the J-FET type. Linear amplifier is delivered in a Cut Tape (CT) case. There is a growing number of terminations approaching the number of 8. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 8-pin op amp ic is included in the package. There is an input offset voltage of 15mV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. Using a supply current of 200μA , this buffer op amp will be able to operate. Voltage gain should remain at 75.56dB. Instrumentation amplifier has 2 channels on it. The operating supply voltage of instrumentation amplifier is rated 18V voltage. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.

TL062CDT Features


8 Pins
supply voltage of 15V
75.56dB voltage gain

TL062CDT Applications


There are a lot of STMicroelectronics TL062CDT Instrumentational OP Amps applications.

  • Polarized electrodes
  • Automation control systems
  • Band-stop filter
  • Video amplifiers
  • High input resistance broadband
  • Logarithmic operation circuits
  • Fission chambers
  • Inverse/same-phase proportional circuit
  • Gaming industry
  • Commercial audio systems
999
In-stock
Get Quote
TL082CDR Ultralife

TL082CDR Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the J-FET type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 15mV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. As long as the supply current of the chip does not exceed 1.4mA, this op amp ic can operate. Maintain 106.02dB as the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. As a result of this, the buffer amplifier is packed in TR.

TL082CDR Features


8 Pins
supply voltage of 15V
106.02dB voltage gain

TL082CDR Applications


There are a lot of Texas Instruments TL082CDR Instrumentational OP Amps applications.

  • Cinema or auditorium audio system
  • High/low-pass filter circuit
  • Inverse/same-phase proportional circuit
  • Signal transformation
  • Professional videography
  • Polarized electrodes
  • Signal operation
  • Strain gauges
  • pH (acidity)
  • High gain DC amplifier
999
In-stock
Get Quote

Please send RFQ , we will respond immediately.