Strain Gauges(8327)

Part	Manufacturer	Description		Stock	Action
815-TPS3809K33QDBVRQ1	Texas Instruments	TPS3809K33QDBVRQ1 Overview This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. It is packaged with Cut Tape (CT). Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 3 pins that are attached to IC management. There are 3 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 9μA. To find similar IC managements from the manufacturer, you can always search by TPS3809K33. A maximum supply temperature of 30μA can be used with this power management. A PMIC from the well-known Automotive, AEC-Q100 series of products is being offered here. TPS3809K33QDBVRQ1 Features Simple Reset/Power-On Reset type Minimum supply voltage of 2V 9μA operating supply current TPS3809K33QDBVRQ1 Applications There are a lot of Texas Instruments TPS3809K33QDBVRQ1 Voltage Supervisors applications. Electric heating appliances Functional modules Power communication system Solar power charger Automotive power systems Insulation fault location system Microcontroller system Set top box Utility meter Linux and server computing	PDF	999 In-stock	Get Quote
815-TPS3307-18DGN	Texas Instruments	TPS3307-18DGN Overview This power management consists of 8 mounting terminals on which it can be mounted. It is packaged with Tube. Power management is possible to find a series of 1 functions. This power management is made up of 3 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 3 is applied to the power ic, it conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 8 pins on IC management. There are 8 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. In order to maintain a stable supply current for the power management, 15μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by TPS3307. The maximum supply temperature is 40μA. TPS3307-18DGN Features Multi-Voltage Supervisor type Minimum supply voltage of 2V 15μA operating supply current TPS3307-18DGN Applications There are a lot of Texas Instruments TPS3307-18DGN Voltage Supervisors applications. Multi-voltage system Battery cars Computer applications Medical-specific isolation transformer Microcontroller system Solar power charger Radar Power distribution systems of CCU Efficient information transmission Household appliances	PDF	999 In-stock	Get Quote
536-MCP809T-300I/TT	Microchip Technology	MCP809T-300I/TT Overview A total of 3 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. When 2.85V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 3 pins are located on this power management. The pins of the power management system count 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 60μA. A similar IC managements number of the manufacturer can always be found by using MCP809, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 60μA. MCP809T-300I/TT Features Simple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP809T-300I/TT Applications There are a lot of Microchip Technology MCP809T-300I/TT Voltage Supervisors applications. Power distribution systems of CCU Household appliances Magnetic resonance imaging Satellite navigation emergency room Efficient information transmission Linux and server computing Battery-powered equipment Military electronics Transformer load monitoring equipment	PDF	999 In-stock	Get Quote
761-STM6717TGWY6F	STMicroelectronics	STM6717TGWY6F Overview There are 5 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. IC management conducts in a 3.3V-voltage supply. IC management conducts in a 2-voltage supply. The mount is provided by Surface Mount. The total number of pins on this power management is 5. There are 5 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supply current of the power management is 35μA. To find similar IC managements from the manufacturer, you can always search by STM6717. At most, voltage supervisor can operate at a supply temperature of 35μA. STM6717TGWY6F Features Multi-Voltage Supervisor type Minimum supply voltage of 800mV 35μA operating supply current STM6717TGWY6F Applications There are a lot of STMicroelectronics STM6717TGWY6F Voltage Supervisors applications. Medical-specific isolation transformer Medical-specific insulation monitor Transformer load monitoring equipment External alarm Display equipment DC stabilized power supply module Insulation fault location system Magnetic resonance imaging Stable power system Sensitive sensors	PDF	1 In-stock	Get Quote
761-STM6503VEAADG6F	STMicroelectronics	STM6503VEAADG6F Overview There are 8 terminals on this power management that allow it to be mounted. There is a Digi-Reel?-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. There are 8-WFDFN functions included in this PMIC so that you can refer to them. Compared to other Reset Timer products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 8 pins on the board. There are 8 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. You can always use STM6503, the base supervisor number, to search for similar PMICs of the manufacturer. As the name implies, this supervisor is a kind of the famous Smart Reset? series product line. STM6503VEAADG6F Features Reset Timer type Minimum supply voltage of 1V STM6503VEAADG6F Applications There are a lot of STMicroelectronics STM6503VEAADG6F Voltage Supervisors applications. Power distribution systems of ICU Microcontroller system Computer applications Detection of phase sequence DSP Multi-voltage system Precision measurement Power distribution systems of operating room Insulation fault location system Analog circuit	PDF	999 In-stock	Get Quote
536-MCP100-450DI/TO	Microchip Technology	MCP100-450DI/TO Overview There are 3 terminals on this power management that allow it to be mounted. There is a Bulk-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 4.25V. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount, Through Hole mount. This power ic can be sub-categorized as Power Management Circuits. A total of 3 pins are located on this power management. 3 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 60μA. To find similar IC managements from the manufacturer, you can always search by MCP100. A maximum supply temperature of 60μA can be used. MCP100-450DI/TO Features Simple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP100-450DI/TO Applications There are a lot of Microchip Technology MCP100-450DI/TO Voltage Supervisors applications. Microprocessor system Battery-powered equipment Set top box Computer applications Smart meter External alarm Detection of phase sequence Solar power charger Detection of phase loss Smartphones	PDF	999 In-stock	Get Quote
536-MCP809T-450I/TT	Microchip Technology	MCP809T-450I/TT Overview As you can see, this power management is mounted through 3 terminals. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. When a supply voltage of 4.25V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 3 pins in it. 3 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 60μA is the recommended value. You can always use MCP809, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 60μA. MCP809T-450I/TT Features Simple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP809T-450I/TT Applications There are a lot of Microchip Technology MCP809T-450I/TT Voltage Supervisors applications. emergency room Leakage protection Radar Military communications Automotive permanent magnet synchronous motors FPGA design Analog circuit Computer applications Automotive power systems External alarm	PDF	999 In-stock	Get Quote
536-MCP100-475DI/TO	Microchip Technology	MCP100-475DI/TO Overview A total of 3 terminals are used to mount this power management. In terms of packaging, power management follows the Bulk model. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In a 4.5V supply voltage, the power management conducts. Power management conducts at a voltage of 1. The power management is mounted by Through Hole. The power management belongs to the Power Management Circuits subcategory. It has a total of 3 pins that are attached to IC management. There are 3 pins on the supervisor. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Through Hole is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 60μA. For similar manage ics search of the manufacturer, you can always refer to MCP100, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA. MCP100-475DI/TO Features Simple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP100-475DI/TO Applications There are a lot of Microchip Technology MCP100-475DI/TO Voltage Supervisors applications. Household appliances Rechargeable batteries Important electronics for automotive protection Set top box Important electronics for automotive safety DSP Consumer electronics Stable power system Linux and server computing Telecommunications equipment	PDF	616 In-stock	Get Quote
815-TLV803SDBZT	Texas Instruments	TLV803SDBZT Overview There are 3 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 2V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. Pin count of the power management is 3. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. Supplied with a operating current of 20μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to TLV803, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 30μA. TLV803SDBZT Features Simple Reset/Power-On Reset type Minimum supply voltage of 1.1V 20μA operating supply current TLV803SDBZT Applications There are a lot of Texas Instruments TLV803SDBZT Voltage Supervisors applications. Consumer electronics Data storage applications Medical-specific insulation monitor Microprocessor system Radar Military communications Battery cars Leakage protection Medical-specific isolation transformer Transformer load monitoring equipment	PDF	999 In-stock	Get Quote
761-STM6315RDW13F	STMicroelectronics	STM6315RDW13F Description A low power supervisory device used to keep an eye on power supplies is the STM6315RDW13F Microprocessor Reset Circuit. It just has one job: asserting a reset signal whenever the VCC supply voltage falls below a predetermined value and maintaining it until the VCC has risen over the predetermined threshold for a minimum amount of time (trec). Additionally, it has a manual reset input (MR). It is possible to pull up the open drain RST output to a voltage that is greater than VCC but lower than 6V. STM6315RDW13F Features 1.5 A is the low supply current (typ) At 25°C, the reset threshold accuracy is 1.8%. RST assertion is ensured down to VCC = 1.0V Open drain RST output may be greater than VCC. Immunity to power supply transients Thermostat operating range: -40 to +125 °C Offered in the SOT143-4 package. STM6315RDW13F Applications Switching applications	PDF	999 In-stock	Get Quote
815-TPS3801I50DCKR	Texas Instruments	TPS3801I50DCKR Overview It is mounted through 5 terminals on the power management. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 5-TSSOP, SC-70-5, SOT-353 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3.3V. IC management is possible to find a succession of 1 voltages that have been checked. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 5 pins in it. This power management system has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. It is always advisable to use TPS3801I50, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 25μA can be used. TPS3801I50DCKR Features Simple Reset/Power-On Reset type Minimum supply voltage of 2V 9μA operating supply current TPS3801I50DCKR Applications There are a lot of Texas Instruments TPS3801I50DCKR Voltage Supervisors applications. Microcontroller system Household appliances Detection of phase sequence Digitally controlled LDO regulators circuit Battery-powered equipment Low voltage/high power - AI, GPU Smart meter Multi-voltage system Satellite navigation Urban rail transit weak current power monitoring	PDF	999 In-stock	Get Quote
536-MCP121T-195I/TT	Microchip Technology	MCP121T-195I/TT Overview As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. A total of 3 pins are located on this power management. Pin count of the power management is 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. Supplied with a operating current of 20μA, this PMIC is capable of fully function as specified. It is always advisable to use MCP121, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 20μA can be used. MCP121T-195I/TT Features Simple Reset/Power-On Reset type Minimum supply voltage of 1V 20μA operating supply current MCP121T-195I/TT Applications There are a lot of Microchip Technology MCP121T-195I/TT Voltage Supervisors applications. Functional modules Utility meter Battery-powered equipment Radio Linux and server computing Rechargeable batteries Dash board Automotive permanent magnet synchronous motors Digitally controlled LDO regulators circuit Telecommunications equipment	PDF	999 In-stock	Get Quote
536-MIC2775-31YM5-TR	Microchip Technology	MIC2775-31YM5-TR Overview There are 5 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a SC-74A, SOT-753 package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.5V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . As a result of this supervisor's operation, the output voltage is Complementary. Additionally, there are many other features that can be found inside of the power management, such as [0]. For similar manage ics search of the manufacturer, you can always refer to MIC2775, the base PMIC number. MIC2775-31YM5-TR Features Simple Reset/Power-On Reset type Minimum supply voltage of 1.5V MIC2775-31YM5-TR Applications There are a lot of Microchip Technology MIC2775-31YM5-TR Voltage Supervisors applications. Electronics installed in the vehicle WiFi router Electric heating appliances Detection of phase imbalance Power distribution systems of operating room Computer applications Power distribution systems of infant care room Transformer load monitoring equipment Radar Low voltage/high power - AI, GPU	PDF	999 In-stock	Get Quote
815-TPS3809I50DBVT	Texas Instruments	TPS3809I50DBVT Overview This power management consists of 3 mounting terminals on which it can be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. 3 pins are present in total in this power management. This power management has 3 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. It is estimated that the voltage supervisor's supply current is 9μA. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using TPS3809I50, the base power ics number. Voltage supervisor can work with a supply temperature of 25μA at the most. TPS3809I50DBVT Features Simple Reset/Power-On Reset type Minimum supply voltage of 2V 9μA operating supply current TPS3809I50DBVT Applications There are a lot of Texas Instruments TPS3809I50DBVT Voltage Supervisors applications. Dash board Smartphones Battery cars Battery-powered equipment Unattended substation automation Low voltage/high power - AI, GPU Personal computers Multi-voltage system Sensitive sensors Power communication system	PDF	999 In-stock	Get Quote
815-TPS3801J25DCKR	Texas Instruments	TPS3801J25DCKR Overview There are 5 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. Please find attached 5-TSSOP, SC-70-5, SOT-353 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. There should be no more than 6V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 9μA volt supply current. To find similar IC managements from the manufacturer, you can always search by TPS3801J25. Voltage supervisor can work with a supply temperature of 25μA at the most. TPS3801J25DCKR Features Simple Reset/Power-On Reset type Minimum supply voltage of 2V 9μA operating supply current TPS3801J25DCKR Applications There are a lot of Texas Instruments TPS3801J25DCKR Voltage Supervisors applications. Medical-specific isolation transformer Digitally controlled LDO regulators circuit Important electronics for automotive protection Battery-powered equipment Insulation fault location system Refrigeration Power distribution systems of infant care room Electrical fire monitoring system FPGA design Power communication system	PDF	999 In-stock	Get Quote
536-MCP1316MT-20LI/OT	Microchip Technology	MCP1316MT-20LI/OT Overview It is mounted through 5 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. Please refer to power management for SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. A IC power such as this can be classified as a Power Management Circuits power management system. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using MCP1316M, the base power ics number. MCP1316MT-20LI/OT Features Simple Reset/Power-On Reset type MCP1316MT-20LI/OT Applications There are a lot of Microchip Technology MCP1316MT-20LI/OT Voltage Supervisors applications. Detection of phase loss External alarm Radar Power communication system Fire equipment power monitoring system Smartphones Rechargeable batteries Electronics installed in the vehicle DC stabilized power supply module Analog circuit	PDF	999 In-stock	Get Quote
815-TPS3420DDRYT	Texas Instruments	TPS3420DDRYT Overview Power management is mounted through 6 terminals. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of 6-UFDFN functions. There are many benefits that this IC power shares with other Reset Timer products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. The pins of the power management system count 6. A voltage (Vsup) that doesn't fall below 1.6V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 6.5V volts in this IC management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. During operation, this power management system outputs Open Drain or Open Collector. There is a supply current of 350nA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3420, which is the base power ics number. In total, there are 2 inputs on the power management that can be monitored. TPS3420DDRYT Features Reset Timer type Minimum supply voltage of 1.6V 350nA operating supply current TPS3420DDRYT Applications There are a lot of Texas Instruments TPS3420DDRYT Voltage Supervisors applications. Efficient information transmission Radio Military communications Leakage current detection Leakage protection Medical-specific insulation monitor Radar Digitally controlled LDO regulators circuit Household appliances Display equipment	PDF	999 In-stock	Get Quote
815-TPS3808G18DRVR	Texas Instruments	TPS3808G18DRVR Overview Power management is mounted through 6 terminals. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes 6-WDFN Exposed Pad functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 6 pins in it. 6 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.65V volts. There should be no more than 6.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The power management's supply current is 2.7μA. To find similar IC managements from the manufacturer, you can always search by TPS3808G18. TPS3808G18DRVR Features Simple Reset/Power-On Reset type Minimum supply voltage of 1.65V 2.7μA operating supply current TPS3808G18DRVR Applications There are a lot of Texas Instruments TPS3808G18DRVR Voltage Supervisors applications. Smart meter Medical-specific isolation transformer Household appliances Military communications Embedded computing DC stabilized power supply module Detection of phase imbalance Power communication system Analog circuit Refrigeration	PDF	999 In-stock	Get Quote
815-TPS3823-25DBVR	Texas Instruments	TPS3823-25DBVR Overview There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Cut Tape (CT)-packaging is used. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. When 3.3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 5 pins are present in total in this power management. The pins of the power management system count 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 15μA. You can always use TPS3823, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 25μA at the most. TPS3823-25DBVR Features Simple Reset/Power-On Reset type Minimum supply voltage of 1.1V 15μA operating supply current TPS3823-25DBVR Applications There are a lot of Texas Instruments TPS3823-25DBVR Voltage Supervisors applications. Battery cars Power distribution systems of operating room Efficient information transmission Military communications Automotive permanent magnet synchronous motors DVR Sensitive sensors Battery-powered equipment Magnetic resonance imaging Important electronics for automotive safety	PDF	999 In-stock	Get Quote
815-TPS3836J25DBVR	Texas Instruments	TPS3836J25DBVR Overview A total of 5 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.8V volt supply. Power management conducts at a voltage of 1. Power management is included in the Surface Mount mount. In total, IC powers are 5 pins on the board. There are 5 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.6V volts. There should be no more than 6V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 250nA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to TPS3836J25, the base PMIC number. The maximum supply temperature that PMIC chip can work with is 15μA. TPS3836J25DBVR Features Simple Reset/Power-On Reset type Minimum supply voltage of 1.6V 250nA operating supply current TPS3836J25DBVR Applications There are a lot of Texas Instruments TPS3836J25DBVR Voltage Supervisors applications. Power distribution systems of infant care room Telecommunications equipment Efficient information transmission Embedded computing Automotive power systems External alarm emergency room Power communication system Leakage protection Solar power charger	PDF	999 In-stock	Get Quote
815-TPS3125J18DBVR	Texas Instruments	TPS3125J18DBVR Overview This power management consists of 5 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 1.8V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. Pin count of the power management is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 750mV, which is the minimum supply voltage that should be applied. There should be no more than 3.3V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 14μA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. To find similar IC managements from the manufacturer, you can always search by TPS3125J18. The maximum supply temperature is 25μA. TPS3125J18DBVR Features Simple Reset/Power-On Reset type Minimum supply voltage of 750mV 14μA operating supply current TPS3125J18DBVR Applications There are a lot of Texas Instruments TPS3125J18DBVR Voltage Supervisors applications. Display equipment DC stabilized power supply module Insulation fault location system Magnetic resonance imaging Stable power system Sensitive sensors Efficient information transmission Functional modules Consumer electronics Personal computers	PDF	10149 In-stock	Get Quote
815-TLC7733IPWR	Texas Instruments	TLC7733IPWR Overview A total of 8 terminals are used to mount this power management. There is a Cut Tape (CT)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for 8-TSSOP (0.173, 4.40mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 8 pins. 8 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 9μA. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using TLC7733, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA. TLC7733IPWR Features Simple Reset/Power-On Reset type Minimum supply voltage of 2V 9μA operating supply current TLC7733IPWR Applications There are a lot of Texas Instruments TLC7733IPWR Voltage Supervisors applications. Electrical fire monitoring system Functional modules Insulation fault location system Rechargeable batteries Embedded computing Refrigeration Sensitive sensors Smart meter Electronics installed in the vehicle Unattended substation automation	PDF	999 In-stock	Get Quote
815-TPS3808G50DBVT	Texas Instruments	TPS3808G50DBVT Overview There are 6 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find SOT-23-6 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. There is a subcategory of this power ic known as Power Management Circuits. A total of 6 pins are located on this power management. There are 6 pins on the supervisor. IC management can only work with a supply voltage of 1.65V volts. There should be no more than 6.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C TJ. The output voltage of this power managment ic during operation is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 2.4μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using TPS3808G50, the base power ics number. TPS3808G50DBVT Features Simple Reset/Power-On Reset type Minimum supply voltage of 1.65V 2.4μA operating supply current TPS3808G50DBVT Applications There are a lot of Texas Instruments TPS3808G50DBVT Voltage Supervisors applications. Functional modules Transformer load monitoring equipment External alarm Urban rail transit weak current power monitoring Military electronics Radar Rechargeable batteries Automotive power systems Refrigeration Radio	PDF	999 In-stock	Get Quote
815-TPS3306-18DGKR	Texas Instruments	TPS3306-18DGKR Overview This power management consists of 8 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 2 channels. In this IC management you will find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for you to refer to. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. In a 3.3V supply voltage, the power management conducts. A supply voltage of 2 is used to conduct the PMIC chip. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 8. The pins of the power management system count 8. A voltage (Vsup) that doesn't fall below 2.7V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 15μA is the recommended value. There are also other features in the software such as [0], just to mention a few. To find similar IC managements from the manufacturer, you can always search by TPS3306. This power management requires 3/5V power to work. Voltage supervisor can work with a supply temperature of 40μA at the most. TPS3306-18DGKR Features Multi-Voltage Supervisor type Minimum supply voltage of 2.7V 15μA operating supply current TPS3306-18DGKR Applications There are a lot of Texas Instruments TPS3306-18DGKR Voltage Supervisors applications. Power communication system Unattended substation automation Precision measurement DVR Important electronics for automotive safety Telecommunications equipment Low voltage/high power - AI, GPU Insulation fault location system emergency room Personal computers	PDF	999 In-stock	Get Quote
815-TPS3106E09DBVR	Texas Instruments	TPS3106E09DBVR Overview There are 6 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SOT-23-6 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 0.9V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. It is possible to subcategorize this power ic as a Power Management Circuits chip. 6 pins are present in total in this power management. This power management system has 6 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 400mV. The supply voltage (Vsup) should not exceed 3.3V volts in this IC power. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TJ. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 1.2μA. To find similar IC managements from the manufacturer, you can always search by TPS3106E09. The maximum supply temperature that PMIC chip can work with is 27μA. TPS3106E09DBVR Features Simple Reset/Power-On Reset type Minimum supply voltage of 400mV 1.2μA operating supply current TPS3106E09DBVR Applications There are a lot of Texas Instruments TPS3106E09DBVR Voltage Supervisors applications. Consumer electronics Household appliances Automotive permanent magnet synchronous motors Multi-voltage system Automotive power systems Leakage protection Low voltage/high power - AI, GPU Dash board DC stabilized power supply module Digitally controlled LDO regulators circuit	PDF	999 In-stock	Get Quote
815-TPS3307-33DGNR	Texas Instruments	TPS3307-33DGNR Overview There are 8 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. There are 3 channels available on this supervisor, and each channel has a different function. IC management is packaged as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 3.3V supply voltage, the power management conducts. When a supply voltage of 3 is applied to the power ic, it conducts. The power management system can be categorized as a Power Management Circuits chip. 8 pins are present in total in this power management. There are 8 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 15μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use TPS3307, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 40μA. TPS3307-33DGNR Features Multi-Voltage Supervisor type Minimum supply voltage of 2V 15μA operating supply current TPS3307-33DGNR Applications There are a lot of Texas Instruments TPS3307-33DGNR Voltage Supervisors applications. Power distribution systems of infant care room Stable power system Battery cars Dash board Detection of phase sequence Unattended substation automation Detection of phase imbalance Efficient information transmission Linux and server computing Low voltage/high power - AI, GPU	PDF	999 In-stock	Get Quote
815-TPS3836L30DBVT	Texas Instruments	TPS3836L30DBVT Overview There are 5 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Cut Tape (CT). As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.8V volt supply. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. In total, it has 5 pins on IC management. There are 5 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.6V. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 250nA supply current present in the power management. Among other features, IC power can be also taken advantage of [0], for instance. To find similar IC managements from the manufacturer, you can always search by TPS3836L30. The maximum supply temperature that PMIC chip can work with is 15μA. TPS3836L30DBVT Features Simple Reset/Power-On Reset type Minimum supply voltage of 1.6V 250nA operating supply current TPS3836L30DBVT Applications There are a lot of Texas Instruments TPS3836L30DBVT Voltage Supervisors applications. Low voltage/high power - AI, GPU Power communication system Power distribution systems of ICU Efficient information transmission Personal computers Magnetic resonance imaging Data storage applications Radio Smartphones Solar power charger	PDF	999 In-stock	Get Quote
815-TPS3836J25DBVT	Texas Instruments	TPS3836J25DBVT Overview There are 5 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Cut Tape (CT). There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 1.8V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. The total number of pins on this power management is 5. Pin count of the power management is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.6V. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 250nA is the recommended value. It is always advisable to use TPS3836J25, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 15μA. TPS3836J25DBVT Features Simple Reset/Power-On Reset type Minimum supply voltage of 1.6V 250nA operating supply current TPS3836J25DBVT Applications There are a lot of Texas Instruments TPS3836J25DBVT Voltage Supervisors applications. Power distribution systems of CCU Satellite navigation External alarm Radio Functional modules Detection of phase imbalance Kitchen appliances Set top box Microprocessor system Transformer load monitoring equipment	PDF	999 In-stock	Get Quote
815-TPS3838E18DBVT	Texas Instruments	TPS3838E18DBVT Overview As you can see, this power management is mounted through 5 terminals. Cut Tape (CT)-packaging is used. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1.8V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. The total number of pins on this power management is 5. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.6V. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 250nA. It is always advisable to use TPS3838E18, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 15μA. TPS3838E18DBVT Features Simple Reset/Power-On Reset type Minimum supply voltage of 1.6V 250nA operating supply current TPS3838E18DBVT Applications There are a lot of Texas Instruments TPS3838E18DBVT Voltage Supervisors applications. Microprocessor system Kitchen appliances Consumer electronics Battery cars Utility meter Radar Detection of phase sequence Battery cars Network equipment DC stabilized power supply module	PDF	999 In-stock	Get Quote
815-TL7700CDGKR	Texas Instruments	TL7700CDGKR Overview This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management belongs to the Power Management Circuits subcategory. There are a total of 8 pins on power management. 8 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1.8V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 40V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supervisor's supply current is specified to 1mA. If you want to search for similar IC managements of this manufacturer, you can always refer to TL7700, which is the base power ics number. A power supply of 2/36V watts is required for the operation of this power management. The maximum supply temperature voltage supervisor can handle is 1mA. TL7700CDGKR Features Simple Reset/Power-On Reset type Minimum supply voltage of 1.8V 1mA operating supply current TL7700CDGKR Applications There are a lot of Texas Instruments TL7700CDGKR Voltage Supervisors applications. Important electronics for automotive protection Automotive power systems DC stabilized power supply module Personal computers Network equipment Military communications Military electronics Rechargeable batteries Unattended substation automation Leakage protection	PDF	999 In-stock	Get Quote