My CartStrain Gauges(8327)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Texas Instruments | TPS3808G01MDBVTEP Description : The supervisory circuits of the TPS3808G01MDBVTEP microprocessor monitor system voltages from 0.4 V to 5.0 V, issuing an open-drain RESET signal when the SENSE voltage falls below a predefined threshold or when the manual reset (MR) pin becomes logic low. After the SENSE voltage and manual reset (MR) return over their respective thresholds, the RESET output remains low for the user-adjustable delay time. To achieve 0.5 percent threshold accuracy for VIT 3.3 V, the TPS3808G01MDBVTEP uses a precision reference. The reset delay period can be modified to 20 milliseconds by disconnecting the CT pin, 300 milliseconds by connecting the CT pin to VDD via a resistor, or 1.25 milliseconds to 10 milliseconds by connecting the CT pin to an external capacitor. With a typical quiescent current of 2.4 A, the TPS3808G01MDBVTEP is well-suited to battery-powered applications. It comes in a compact SOT-23 packaging and is completely defined for temperatures between –55°C and +125°C (TJ). TPS3808G01MDBVTEP Features : Controlled Baseline One Assembly Site One Test Site One Fabrication Site Extended Temperature Performance of –55°C to 125°C Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change Notification Qualification Pedigree1 Power-On Reset Generator With Adjustable Delay Time: 1.25 ms to 10 s Very Low Quiescent Current: 2.4 μA Typical High Threshold Accuracy: 0.5% Typical Fixed Threshold Voltages for Standard Voltage Rails From 0.9 V to 5 V and Adjustable Voltage Down to 0.4 V Are Available Manual Reset (MR) Input Open-Drain RESET Output Temperature Range: –55°C to 125°C Small SOT-23 Package TPS3808G01MDBVTEP Applications : DSP or Microcontroller Applications Notebook/Desktop Computers PDAs and Hand-Held Products Portable and Battery Powered Products FPGA and ASIC Applications |
7104
In-stock
|
Get Quote | |||
| Texas Instruments | UCC2946D OverviewPower management is mounted through 8 terminals. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Packages are specified to have an average peak reflow temperature of 260. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. There are a total of 8 pins on power management. There are 8 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.1V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 10μA, this PMIC is capable of fully function as specified. It is always advisable to use UCC2946, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 2.5/5V volts of power. At the most, voltage supervisor can work with a supply temperature of 18μA. UCC2946D FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 2.1V 10μA operating supply current UCC2946D ApplicationsThere are a lot of Texas Instruments UCC2946D Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | UCD90160ARGCT OverviewAs you can see, this power management is mounted through 64 terminals. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 64-VFQFN Exposed Pad functions for your reference. There are a number of benefits that this PMIC has in common with other Sequencer manage ics. When 3.3V is applied to the power ic, it conducts. Power ics operate at 16 supply voltages. The pins of the power management system count 64. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~110°C TA degrees. You can always use UCD90160, the base supervisor number, to search for similar PMICs of the manufacturer. UCD90160ARGCT FeaturesSequencer type UCD90160ARGCT ApplicationsThere are a lot of Texas Instruments UCD90160ARGCT Voltage Supervisors applications.
|
7823
In-stock
|
Get Quote | |||
| Texas Instruments | UCD9090RGZT OverviewThere are 48 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Cut Tape (CT) model. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a 48-VFQFN Exposed Pad package. There are many benefits that this IC power shares with other Sequencer products as well. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3.3V. A supply voltage of 10 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. In total, the power management has 48 pins in it. This power management system has 48 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 3V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 3.6V volts in this IC management. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~110°C TA. It is always advisable to use UCD9090, the base supervisor number, when searching for similar PMICs from the manufacturer. UCD9090RGZT FeaturesSequencer type Minimum supply voltage of 3V UCD9090RGZT ApplicationsThere are a lot of Texas Instruments UCD9090RGZT Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics |
29959
In-stock
|
Get Quote | ||||
| STMicroelectronics | STM809TWX6F OverviewAs far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in a Cut Tape (CT)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 3.3V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 3 pins that are attached to IC management. There are 3 pins on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by STM809. At most, voltage supervisor can operate at a supply temperature of 15μA. STM809TWX6F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 15μA operating supply current STM809TWX6F ApplicationsThere are a lot of STMicroelectronics STM809TWX6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM811TW16F OverviewThis power management consists of 4 mounting terminals on which it can be mounted. Cut Tape (CT)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-253-4, TO-253AA functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 4. 4 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 15μA. To find similar IC managements from the manufacturer, you can always search by STM811. The maximum supply temperature voltage supervisor can handle is 15μA. STM811TW16F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 15μA operating supply current STM811TW16F ApplicationsThere are a lot of STMicroelectronics STM811TW16F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM1001SWX6F OverviewThere are 3 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 3 pins are present in total in this power management. 3 pins are on the supervisor. It is recommended that Vsup should not be less than 1.2V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. Supplied with a operating current of 6μA, this PMIC is capable of fully function as specified. It is always advisable to use STM1001, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 15μA. STM1001SWX6F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1.2V 6μA operating supply current STM1001SWX6F ApplicationsThere are a lot of STMicroelectronics STM1001SWX6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | <h3>TL7705AIDR Overview</h3><div><br/>There are 8 terminals on this power management that allow it to be mounted. There is a Cut Tape (CT)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 8 pins on IC management. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3.5V. The maximum supply voltage (Vsup) in this PMIC should not exceed 18V volts. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Complementary. There is a 1.8mA supply current present in the power management. You can always use TL7705, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature that PMIC chip can work with is 3mA. <br/><br/></div><h3>TL7705AIDR Features</h3><div><br/>Simple Reset/Power-On Reset type<br/>Minimum supply voltage of 3.5V<br/>1.8mA operating supply current<br/><br/></div><h3>TL7705AIDR Applications</h3><div><br/>There are a lot of Texas Instruments TL7705AIDR Voltage Supervisors applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>External alarm <!--<li--></li><li>Embedded computing<!--<li--></li><li>Power distribution systems of infant care room<!--<li--></li><li>Automotive permanent magnet synchronous motors<!--<li--></li><li>Household appliances<!--<li--></li><li>Rechargeable batteries<!--<li--></li><li>Military electronics<!--<li--></li><li>Electric heating appliances<!--<li--></li><li>Satellite navigation<!--<li--></li><li>Power distribution systems of operating room<!--<li--></li></ul> |
280
In-stock
|
Get Quote | |||
| Microchip Technology | MIC803-29D3VC3-TR OverviewPower management is packaged in a Tape & Reel (TR) way. Please refer to power management for SC-70, SOT-323 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. 3 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~125°C TJ . During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 4.5μA volt supply current. You can always use MIC803, the base supervisor number, to search for similar PMICs of the manufacturer. There are 1 elements to this supervisor, which can be used in a variety of applications. MIC803-29D3VC3-TR FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 4.5μA operating supply current MIC803-29D3VC3-TR ApplicationsThere are a lot of Microchip Technology MIC803-29D3VC3-TR Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | TS831-4IZT OverviewThere are 3 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. Please refer to power management for TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In a 5V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. The mount is attached to Through Hole. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 3 pins. This power management has 3 pins. Supply voltage (Vsup) should be at least 1V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Through Hole is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 12μA volt supply current. There are also other features in the software such as [0], just to mention a few. To find similar IC managements from the manufacturer, you can always search by TS831. A maximum supply temperature of 12μA can be used. TS831-4IZT FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 12μA operating supply current TS831-4IZT ApplicationsThere are a lot of STMicroelectronics TS831-4IZT Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM6524AUABDL6F OverviewPower management is mounted through 6 terminals. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find 6-UFDFN functions for your reference. As with other Reset Timer products, this IC management also offers a wide range of benefits. IC management conducts at a voltage of 3V. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. This power management has 6 pins. There should be a minimum voltage supply (Vsup) of 1.65V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. If you want to search for similar IC managements of this manufacturer, you can always refer to STM6524, which is the base power ics number. In order to operate this power management, it requires 1.8/5V volts of power. The maximum supply temperature that PMIC chip can work with is 3μA. It is one of the well-known Smart Reset? series power ic line. STM6524AUABDL6F FeaturesReset Timer type Minimum supply voltage of 1.65V STM6524AUABDL6F ApplicationsThere are a lot of STMicroelectronics STM6524AUABDL6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TLV803MDBZR OverviewThis power management consists of 3 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 2V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. The power management belongs to the Power Management Circuits subcategory. 3 pins are present in total in this power management. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 20μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TLV803, which is the base power ics number. At most, voltage supervisor can operate at a supply temperature of 30μA. TLV803MDBZR FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1.1V 20μA operating supply current TLV803MDBZR ApplicationsThere are a lot of Texas Instruments TLV803MDBZR Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM1818SWX7F OverviewPower management is mounted through 3 terminals. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. IC management is specified that the package peak reflow temperature should be 260. Manage ics operate at 3.6V supply voltages. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. 3 pins are present in total in this power management. Power managment ic pin count is 3. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~105°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Bidirectional. It is estimated that the voltage supervisor's supply current is 4μA. For similar manage ics search of the manufacturer, you can always refer to STM1818, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 16μA. STM1818SWX7F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1.2V 4μA operating supply current STM1818SWX7F ApplicationsThere are a lot of STMicroelectronics STM1818SWX7F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM6520AQRRDG9F OverviewA total of 8 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes 8-WFDFN functions. There are a number of benefits that this PMIC has in common with other Reset Timer manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3V supply voltages. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 8 pins. The pins of the power management system count 8. It is recommended that Vsup should not be less than 1.65V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -30°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. As far as the supply current of the power management is concerned, it is 1.5μA. To find similar IC managements from the manufacturer, you can always search by STM6520. As the name implies, this supervisor is a kind of the famous Smart Reset? series product line. STM6520AQRRDG9F FeaturesReset Timer type Minimum supply voltage of 1.65V 1.5μA operating supply current STM6520AQRRDG9F ApplicationsThere are a lot of STMicroelectronics STM6520AQRRDG9F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM8365BALMFX45/NOPB OverviewIt is mounted through 5 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 1.5V. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. 5 pins are present in total in this power management. This power management has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using LM8365, the base power ics number. LM8365BALMFX45/NOPB FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V LM8365BALMFX45/NOPB ApplicationsThere are a lot of Texas Instruments LM8365BALMFX45/NOPB Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP100T-315I/TT OverviewThis power management consists of 3 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3V volt supply. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 3 pins in it. There are 3 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 60μA volt supply current. You can always use MCP100, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 60μA. MCP100T-315I/TT FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP100T-315I/TT ApplicationsThere are a lot of Microchip Technology MCP100T-315I/TT Voltage Supervisors applications.
|
3725
In-stock
|
Get Quote | |||
| STMicroelectronics | STM1818RWX7F OverviewAs you can see, this power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. When 3.6V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 3 pins on IC management. 3 pins are on the supervisor. IC management can only work with a supply voltage of 1.2V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~105°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Bidirectional. In order to maintain a stable supply current for the power management, 16μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using STM1818, the base power ics number. The maximum supply temperature is 16μA. STM1818RWX7F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1.2V 16μA operating supply current STM1818RWX7F ApplicationsThere are a lot of STMicroelectronics STM1818RWX7F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | <h3>TL7705ACDR Overview</h3><div><br/>It is mounted through 8 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts at a voltage of 5V. Power management conducts at a voltage of 1. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. Power managment ic pin count is 8. A voltage (Vsup) that doesn't fall below 3.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 18V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Complementary. The supply current of the power management is 1.8mA. For similar manage ics search of the manufacturer, you can always refer to TL7705, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3mA. <br/><br/></div><h3>TL7705ACDR Features</h3><div><br/>Simple Reset/Power-On Reset type<br/>Minimum supply voltage of 3.5V<br/>1.8mA operating supply current<br/><br/></div><h3>TL7705ACDR Applications</h3><div><br/>There are a lot of Texas Instruments TL7705ACDR Voltage Supervisors applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>Analog circuit<!--<li--></li><li>Radar<!--<li--></li><li>Power communication system<!--<li--></li><li>Cloud computing<!--<li--></li><li>Display equipment<!--<li--></li><li>Linux and server computing<!--<li--></li><li>Embedded computing<!--<li--></li><li>Household appliances<!--<li--></li><li>Detection of phase loss <!--<li--></li><li>Detection of phase imbalance<!--<li--></li></ul> |
999
In-stock
|
Get Quote | |||
| Texas Instruments |
312
In-stock
|
Get Quote | ||||
| STMicroelectronics |
66536
In-stock
|
Get Quote | ||||
| Texas Instruments | TPS3809J25DBVR OverviewThere are 3 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 2.5V. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 3 pins on power management. The pins of the power management system count 3. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. The supply voltage (Vsup) should not exceed 6V volts in this IC power. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 9μA supply current present in the power management. Supervisors are also additional features, such as [0] for example, which are worth mentioning. To find similar IC managements from the manufacturer, you can always search by TPS3809J25. A maximum supply temperature of 25μA can be used with this power management. TPS3809J25DBVR FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 2V 9μA operating supply current TPS3809J25DBVR ApplicationsThere are a lot of Texas Instruments TPS3809J25DBVR Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM809M3-4.63/NOPB OverviewThere are 3 terminals on this power management that allow it to be mounted. Packaged in a Cut Tape (CT)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 5V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 3 pins on power management. There are 3 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~105°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 18μA. You can always use LM809, the base supervisor number, to search for similar PMICs of the manufacturer. LM809M3-4.63/NOPB FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 18μA operating supply current LM809M3-4.63/NOPB ApplicationsThere are a lot of Texas Instruments LM809M3-4.63/NOPB Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP130T-315I/TT OverviewThis power management consists of 3 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 5V. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 3 pins in it. 3 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. It is always advisable to use MCP130, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 60μA. MCP130T-315I/TT FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP130T-315I/TT ApplicationsThere are a lot of Microchip Technology MCP130T-315I/TT Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM6904TZEDS6F OverviewThere are 8 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. There are a total of 4 channels on this supervisor, and they are arranged in a series. There are 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. Power management conducts at a voltage of 4. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 8 pins on the board. 8 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 10μA is the recommended value. You can always use STM6904, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 14μA can be used with this power management. STM6904TZEDS6F FeaturesMulti-Voltage Supervisor type Minimum supply voltage of 800mV 10μA operating supply current STM6904TZEDS6F ApplicationsThere are a lot of STMicroelectronics STM6904TZEDS6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TPS3806I33DBVR OverviewPower management is mounted through 6 terminals. Packaging is in the form of a Cut Tape (CT). In this PMIC, you can find 1 functions for your reference. A series of 2 channels can be found on this supervisor. There are SOT-23-6 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. Power management conducts at a voltage of 2. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 6 pins that are attached to IC management. 6 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1.3V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a supply current of 3μA for the power management. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use TPS3806I33, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 6μA at the most. TPS3806I33DBVR FeaturesMulti-Voltage Supervisor type Minimum supply voltage of 1.3V 3μA operating supply current TPS3806I33DBVR ApplicationsThere are a lot of Texas Instruments TPS3806I33DBVR Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TPS3895ADRYR OverviewThis power management consists of 6 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of 6-UFDFN functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 3.3V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. A total of 6 pins are located on this power management. This power management system has 6 pins. Supply voltage (Vsup) should be at least 1.7V for this power management. There should be no more than 6.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TJ. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 6μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3895, which is the base power ics number. TPS3895ADRYR FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1.7V 6μA operating supply current TPS3895ADRYR ApplicationsThere are a lot of Texas Instruments TPS3895ADRYR Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TPS3824-50DBVR OverviewThis voltage supervisor has a total of 5 mounting terminals that can be used for mounting. A Cut Tape (CT) package is used to package the power management. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. 5 pins are present in total in this power management. There are 5 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supervisor's supply current is specified to 15μA. You can always use TPS3824, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 25μA can be used. TPS3824-50DBVR FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1.1V 15μA operating supply current TPS3824-50DBVR ApplicationsThere are a lot of Texas Instruments TPS3824-50DBVR Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments |
35
In-stock
|
Get Quote | ||||
| Texas Instruments | TPS3825-33DBVR OverviewPower management is mounted through 5 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. When 3.3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. A total of 5 pins are located on this power management. This power management system has 5 pins. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 15μA. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 2.93V to name a few. To find similar IC managements from the manufacturer, you can always search by TPS3825. The maximum supply temperature is 25μA. TPS3825-33DBVR FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1.1V 15μA operating supply current TPS3825-33DBVR ApplicationsThere are a lot of Texas Instruments TPS3825-33DBVR Voltage Supervisors applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
