My CartStrain Gauges(8327)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| STMicroelectronics | STM809LWX6F OverviewIt is mounted through 3 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 3.3V volt supply. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 3 pins on power management. There are 3 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 15μA for the power management. It is always advisable to use STM809, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 15μA can be used. STM809LWX6F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 15μA operating supply current STM809LWX6F ApplicationsThere are a lot of STMicroelectronics STM809LWX6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM1061N16WX6F OverviewThere are 3 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. It is recommended that Vsup should not be less than 700mV for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type for IC management is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 3.6μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to STM1061, which is the base power ics number. A maximum supply temperature of 3.6μA can be used with this power management. STM1061N16WX6F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 700mV 3.6μA operating supply current STM1061N16WX6F ApplicationsThere are a lot of STMicroelectronics STM1061N16WX6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM1061N26WX6F OverviewThis power management consists of 3 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. A total of 3 pins are located on this power management. There are 3 pins on the power managment ic. Supply voltage (Vsup) should be at least 700mV for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The supervisor's supply current is specified to 3.6μA. You can always use STM1061, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3.6μA can be used. STM1061N26WX6F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 700mV 3.6μA operating supply current STM1061N26WX6F ApplicationsThere are a lot of STMicroelectronics STM1061N26WX6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TL7702BCDR OverviewA total of 8 terminals are used to mount this power management. It is packaged with Cut Tape (CT). The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 8 pins on the board. There are 8 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 3.6V. Voltage (Vsup) shouldn't exceed 18V volts in this PMIC. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. The output voltage of this power managment ic during operation is Complementary. The supply current of the power management is 1.8mA. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using TL7702, the base power ics number. The maximum supply temperature is 3.5mA. TL7702BCDR FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 3.6V 1.8mA operating supply current TL7702BCDR ApplicationsThere are a lot of Texas Instruments TL7702BCDR Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM1061N38WX6F OverviewThere are 3 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 3 pins on IC management. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 1.1μA. A similar IC managements number of the manufacturer can always be found by using STM1061, the base power ics number. The maximum supply temperature is 3.6μA. STM1061N38WX6F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 700mV 1.1μA operating supply current STM1061N38WX6F ApplicationsThere are a lot of STMicroelectronics STM1061N38WX6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM809RWX6F OverviewAs you can see, this power management is mounted through 3 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 3.3V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 3 pins. The pins of the power management system count 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 15μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by STM809. The maximum supply temperature voltage supervisor can handle is 15μA. STM809RWX6F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 15μA operating supply current STM809RWX6F ApplicationsThere are a lot of STMicroelectronics STM809RWX6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM6524AHARDL6F OverviewThere are 6 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes 6-UFDFN functions for your convenience. With power management, you get a lot of benefits that you won't find in other Reset Timer products. In a 3V supply voltage, the power management conducts. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. 6 pins make up the power management. It is recommended that Vsup should not be less than 1.65V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supervisor's supply current is specified to 1.5μA. To find similar IC managements from the manufacturer, you can always search by STM6524. To be able to work, this power management requires 1.8/5V volts of power. The maximum supply temperature is 3μA. A PMIC from the well-known Smart Reset? series of products is being offered here. STM6524AHARDL6F FeaturesReset Timer type Minimum supply voltage of 1.65V 1.5μA operating supply current STM6524AHARDL6F ApplicationsThere are a lot of STMicroelectronics STM6524AHARDL6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MIC803-41D4VC3-TR OverviewThere is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached SC-70, SOT-323 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. The pins of the power management system count 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~125°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 4.5μA. You can always use MIC803, the base supervisor number, to search for similar PMICs of the manufacturer. MIC803-41D4VC3-TR FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 4.5μA operating supply current MIC803-41D4VC3-TR ApplicationsThere are a lot of Microchip Technology MIC803-41D4VC3-TR Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | TCM809TENB713 OverviewThere are 3 terminals on this power management that allow it to be mounted. Packaged in a Cut Tape (CT)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. When 3.3V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 3 pins. Pin count of the power management is 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. It is always advisable to use TCM809, the base supervisor number, when searching for similar PMICs from the manufacturer. TCM809TENB713 FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 9μA operating supply current TCM809TENB713 ApplicationsThere are a lot of Microchip Technology TCM809TENB713 Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | MCP809M3-2.93/NOPB OverviewA total of 3 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 3 pins that are attached to IC management. 3 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. There is a supply current of 15μA for the power management. For similar manage ics search of the manufacturer, you can always refer to MCP809, the base PMIC number. MCP809M3-2.93/NOPB FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 15μA operating supply current MCP809M3-2.93/NOPB ApplicationsThere are a lot of Texas Instruments MCP809M3-2.93/NOPB Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP101-475DI/TO OverviewPower management is packaged in a Bulk way. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) functions for your reference. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Through Hole mounts power management on the wall. 3 pins make up the power management. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Through Hole is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 60μA is the recommended value. You can always use MCP101, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA. With 1 elements, this supervisor is used in all areas of target applications. MCP101-475DI/TO FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP101-475DI/TO ApplicationsThere are a lot of Microchip Technology MCP101-475DI/TO Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TLV803MDBZT OverviewAs you can see, this power management is mounted through 3 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 2V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. 3 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supply current of the power management is 20μA. You can always use TLV803, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 30μA. TLV803MDBZT FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1.1V 20μA operating supply current TLV803MDBZT ApplicationsThere are a lot of Texas Instruments TLV803MDBZT Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM706M6F OverviewIt is mounted through 8 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. This power management has 8 pins. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 40μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to STM706, which is the base power ics number. A maximum supply temperature of 60μA can be used. STM706M6F FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 40μA operating supply current STM706M6F ApplicationsThere are a lot of STMicroelectronics STM706M6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP101-475HI/TO OverviewThere are 3 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Bulk-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In a 4.5V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. The mount is provided by Through Hole. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 3 pins in it. 3 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 60μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP101, which is the base power ics number. The maximum supply temperature is 60μA. MCP101-475HI/TO FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP101-475HI/TO ApplicationsThere are a lot of Microchip Technology MCP101-475HI/TO Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP131T-195I/TT OverviewPower management is mounted through 3 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 90μA for the power management. It is always advisable to use MCP131, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 90μA can be used. MCP131T-195I/TT FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 90μA operating supply current MCP131T-195I/TT ApplicationsThere are a lot of Microchip Technology MCP131T-195I/TT Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TLV803RDBZT OverviewThis power management consists of 3 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 2V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a 20μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to TLV803, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 30μA. TLV803RDBZT FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1.1V 20μA operating supply current TLV803RDBZT ApplicationsThere are a lot of Texas Instruments TLV803RDBZT Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP111T-475E/TT OverviewPower management is mounted through 3 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. For this power management, there is an 1.75μA volt supply current. It is always advisable to use MCP111, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 1.75μA. MCP111T-475E/TT FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 1.75μA operating supply current MCP111T-475E/TT ApplicationsThere are a lot of Microchip Technology MCP111T-475E/TT Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP121T-475E/TT OverviewThere are 3 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. IC management is specified that the package peak reflow temperature should be 260. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 3. The pins of the power management system count 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 20μA. You can always use MCP121, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 20μA at the most. MCP121T-475E/TT FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 20μA operating supply current MCP121T-475E/TT ApplicationsThere are a lot of Microchip Technology MCP121T-475E/TT Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP102T-315E/TT OverviewPower management is packaged in a Tape & Reel (TR) way. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. 3 pins are on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 1.75μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP102, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.75μA. MCP102T-315E/TT FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 1.75μA operating supply current MCP102T-315E/TT ApplicationsThere are a lot of Microchip Technology MCP102T-315E/TT Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP120-485DI/TO OverviewThere are 3 terminals on this power management that allow it to be mounted. Bulk-packaging is used. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 5V. When 1 is applied to the power ic, it conducts. The mount is attached to Through Hole. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 3 pins in it. Power managment ic pin count is 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Through Hole mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The power management's supply current is 60μA. A similar IC managements number of the manufacturer can always be found by using MCP120, the base power ics number. The maximum supply temperature is 60μA. MCP120-485DI/TO FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP120-485DI/TO ApplicationsThere are a lot of Microchip Technology MCP120-485DI/TO Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TPS3809J25DBVT OverviewA total of 3 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Supplied with a operating current of 9μA, this PMIC is capable of fully function as specified. Supervisors are also additional features, such as [0] for example, which are worth mentioning. You can always use TPS3809J25, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 25μA can be used. TPS3809J25DBVT FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 2V 9μA operating supply current TPS3809J25DBVT ApplicationsThere are a lot of Texas Instruments TPS3809J25DBVT Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP130-475DI/TO OverviewPower management is mounted through 3 terminals. Power management is packaged in a Bulk way. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In a 5V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. Through Hole is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. Power managment ic pin count is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. You can always use MCP130, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 60μA can be used with this power management. MCP130-475DI/TO FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP130-475DI/TO ApplicationsThere are a lot of Microchip Technology MCP130-475DI/TO Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP130-450DI/TO OverviewThis power management consists of 3 mounting terminals on which it can be mounted. There is a Bulk-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. When 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The mount is provided by Through Hole. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 3. The pins of the power management system count 3. Supply voltage (Vsup) should be at least 1V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Through Hole is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a 60μA supply current present in the power management. You can always use MCP130, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 60μA. MCP130-450DI/TO FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP130-450DI/TO ApplicationsThere are a lot of Microchip Technology MCP130-450DI/TO Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STM6710DWB6F OverviewAs you can see, this power management is mounted through 6 terminals. Packaged in the form of a Cut Tape (CT), power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 4 channels, each of which can be used independently. In this PMIC, you can find SOT-23-6 functions for your reference. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 1.8V is applied to the power ic, it conducts. In a 4 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 6. There are 6 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by STM6710. The maximum supply temperature is 50μA. STM6710DWB6F FeaturesMulti-Voltage Supervisor type Minimum supply voltage of 2V STM6710DWB6F ApplicationsThere are a lot of STMicroelectronics STM6710DWB6F Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP130-315DI/TO OverviewAs far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in a Bulk-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. By Through Hole, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. A total of 3 pins are located on this power management. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Through Hole mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 60μA for the power management. For similar manage ics search of the manufacturer, you can always refer to MCP130, the base PMIC number. The power management can work with a maximum supply temperature of 60μA. MCP130-315DI/TO FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 60μA operating supply current MCP130-315DI/TO ApplicationsThere are a lot of Microchip Technology MCP130-315DI/TO Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM3704YCMM-308/NOPB OverviewAs far as the mounting terminals of this voltage supervisor are concerned, it has 10 in total. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 2 channels that can be found. For your reference, this PMIC includes a list of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 1.2V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 10 pins. There are 10 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TJ . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a supply current of 28μA for the power management. To find similar IC managements from the manufacturer, you can always search by LM3704. LM3704YCMM-308/NOPB FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 1V 28μA operating supply current LM3704YCMM-308/NOPB ApplicationsThere are a lot of Texas Instruments LM3704YCMM-308/NOPB Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TL7705BCP OverviewThere are 8 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tube, power management is easy to use. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 5V volt supply. IC management conducts in a 1-voltage supply. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. This power management system has 8 pins. IC management can only work with a supply voltage of 3.6V volts. The supply voltage (Vsup) should not exceed 18V volts in this IC power. In this case, Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. The output voltage of this power managment ic during operation is Complementary. Supplied with a operating current of 1.8mA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. A similar IC managements number of the manufacturer can always be found by using TL7705, the base power ics number. Voltage supervisor can work with a supply temperature of 3.5mA at the most. TL7705BCP FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 3.6V 1.8mA operating supply current TL7705BCP ApplicationsThere are a lot of Texas Instruments TL7705BCP Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments |
5064
In-stock
|
Get Quote | ||||
| Texas Instruments | TLC7701IDR OverviewThis voltage supervisor has a total of 8 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 2.7V. Power management conducts at a voltage of 1. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supply current of the power management is 9μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. To find similar IC managements from the manufacturer, you can always search by TLC7701. A maximum supply temperature of 16μA can be used. TLC7701IDR FeaturesSimple Reset/Power-On Reset type Minimum supply voltage of 2V 9μA operating supply current TLC7701IDR ApplicationsThere are a lot of Texas Instruments TLC7701IDR Voltage Supervisors applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TPS3307-18D OverviewThere are 8 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tube model. In this PMIC, you can find 1 functions for your reference. There are a total of 3 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 3.3V is used to conduct the PMIC chip. A supply voltage of 3 is used to conduct the PMIC chip. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 8 pins on the board. 8 pins make up the power management. Supply voltage (Vsup) should be at least 2V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 15μA. It is always advisable to use TPS3307, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 40μA. TPS3307-18D FeaturesMulti-Voltage Supervisor type Minimum supply voltage of 2V 15μA operating supply current TPS3307-18D ApplicationsThere are a lot of Texas Instruments TPS3307-18D Voltage Supervisors applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
