Strain Gauges(8327)

TPS386060RGPR Overview

As you can see, this power management is mounted through 20 terminals. There is a Tape & Reel-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 4 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes VQFN EP functions. According to the specification, the package's peak reflow temperature is specified to be 260. When 3.3V is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 20 pins that are attached to IC management. This power management has 20 pins. Supply voltage (Vsup) should be at least 1.8V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 6.5V volts. It also contains ICs of other kinds, such as POWER SUPPLY MANAGEMENT CIRCUIT, which are included in the power management. A power supply of 2/6V watts is required for the operation of this power management.

TPS386060RGPR Features

Minimum supply voltage of 1.8V

TPS386060RGPR Applications

There are a lot of Texas Instruments
TPS386060RGPR Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system

5962-9093203MEA Overview

As you can see, this power management is mounted through 16 terminals. To assist you, this IC power includes 1 functions. There are 2 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes CDIP functions. According to the specification, the package's peak reflow temperature is specified to be NOT SPECIFIED. When 5V is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. It also contains ICs of other kinds, such as POWER SUPPLY SUPPORT CIRCUIT, which are included in the power management. A power supply of 3.5/18V watts is required for the operation of this power management. IC management can operate at a maximum temperature of 125°C. At least a working temperature of -55°C is required.

5962-9093203MEA Features

5962-9093203MEA Applications

There are a lot of Texas Instruments
5962-9093203MEA Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system

TPS3824-25DBVRG4 Overview

It is mounted through 5 terminals on the power management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are SOT-23 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3.3V. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. As far as the supply current of the power management is concerned, it is 15μA. The maximum supply temperature that PMIC chip can work with is 25μA. There are 1 elements to this supervisor, which can be used in a variety of applications.

TPS3824-25DBVRG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current

TPS3824-25DBVRG4 Applications

There are a lot of Texas Instruments
TPS3824-25DBVRG4 Voltage Supervisors applications.

• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging

TPS3824-30DBVTG4 Overview

There are 5 terminals connected to this power management, which makes it easy to mount. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SOT-23 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. There are 5 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The supply current of the power management is 15μA. Among other features, IC power can be also taken advantage of [0], for instance. At most, voltage supervisor can operate at a supply temperature of 25μA. With 1 elements, this supervisor is used in all areas of target applications.

TPS3824-30DBVTG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current

TPS3824-30DBVTG4 Applications

There are a lot of Texas Instruments
TPS3824-30DBVTG4 Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors

MCP103T-240E/TTG Overview

In this PMIC, you can find SOT-23 functions for your reference. In a 1 supply voltage, the PMIC chip conducts. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. There is a supply current of 1.75μA for the power management.

MCP103T-240E/TTG Features

Minimum supply voltage of 1V
1.75μA operating supply current

MCP103T-240E/TTG Applications

There are a lot of Microchip Technology
MCP103T-240E/TTG Voltage Supervisors applications.

• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module

UC3904DWTR Overview

As you can see, this power management is mounted through 18 terminals. To assist you, this IC power includes 1 functions. There are 4 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes SOIC functions. According to the specification, the package's peak reflow temperature is specified to be NOT SPECIFIED. When 15V is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 18 pins that are attached to IC management. It also contains ICs of other kinds, such as POWER SUPPLY SUPPORT CIRCUIT, which are included in the power management. IC management can operate at a maximum temperature of 70°C.

UC3904DWTR Features

UC3904DWTR Applications

There are a lot of Texas Instruments
UC3904DWTR Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system

LM810M3-4.00 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Tape and Reel. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SOT-23 functions for you to refer to. A supply voltage of 5V is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. In total, the power management has 3 pins in it. This power management system has 3 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Besides the IC types mentioned above, the power management system also includes other types such as POWER SUPPLY SUPPORT CIRCUIT. The power management system contains 1 elements and has been extensively applied in various target applications.

LM810M3-4.00 Features

Minimum supply voltage of 1V

LM810M3-4.00 Applications

There are a lot of Texas Instruments
LM810M3-4.00 Voltage Supervisors applications.

• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics

UC3544DW Overview

There are 18 terminals on this power management that allow it to be mounted. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In a 10V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 18 pins on IC management. There should be a minimum voltage supply (Vsup) of 4.5V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 40V volts. There is a supply current of 7mA for the power management. It is important to note that the power management also includes other IC types, such as POWER SUPPLY SUPPORT CIRCUIT.

UC3544DW Features

Minimum supply voltage of 4.5V
7mA operating supply current

UC3544DW Applications

There are a lot of Texas Instruments
UC3544DW Voltage Supervisors applications.

• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module

MCP121T-240E/LBG Overview

Power management conducts at a voltage of 1. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The power management's supply current is 20μA.

MCP121T-240E/LBG Features

Minimum supply voltage of 1V
20μA operating supply current

MCP121T-240E/LBG Applications

There are a lot of Microchip Technology
MCP121T-240E/LBG Voltage Supervisors applications.

• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission

UC2544-W Overview

The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. When a supply voltage of 10V is applied to the power ic, it conducts. There are other types of IC included in the power managment ic, such as types POWER SUPPLY SUPPORT CIRCUIT. The maximum operating temperature is 85°C. At the very least, PMIC chip operates at a temperature of -25°C while working.

UC2544-W Features

UC2544-W Applications

There are a lot of Texas Instruments
UC2544-W Voltage Supervisors applications.

• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules

TPS3110E12DBVRG4 Overview

This power management consists of 6 mounting terminals on which it can be mounted. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes SOT-23-6 functions for your convenience. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 1.2V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 6. Pin count of the power management is 6. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 400mV, which is the minimum supply voltage that should be applied. There should be no more than 3.3V volts of maximum supply voltage (Vsup) in this power management. Supplied with a operating current of 1.2μA, this PMIC is capable of fully function as specified. Aside from these IC types, IC management also contains other IC kinds, such as POWER SUPPLY MANAGEMENT CIRCUIT. The maximum supply temperature is 27μA.

TPS3110E12DBVRG4 Features

Minimum supply voltage of 400mV
1.2μA operating supply current

TPS3110E12DBVRG4 Applications

There are a lot of Texas Instruments
TPS3110E12DBVRG4 Voltage Supervisors applications.

• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics
• Personal computers

TPS3837L30DBVRG4 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SOT-23 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1.8V is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 5 pins in it. This power management system has 5 pins. A voltage (Vsup) that doesn't fall below 1.6V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 6V volts in this IC power. In order to maintain a stable supply current for the power management, 250nA is the recommended value. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It requires 3V watts of power to operate this voltage supervisor. The power management can work with a maximum supply temperature of 15μA. The power management system contains 1 elements and has been extensively applied in various target applications.

TPS3837L30DBVRG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current

TPS3837L30DBVRG4 Applications

There are a lot of Texas Instruments
TPS3837L30DBVRG4 Voltage Supervisors applications.

• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics

TL7712AID Overview

There are 8 terminals connected to this power management, which makes it easy to mount. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SOIC functions. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. IC management conducts in a 5V-voltage supply. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 8. There are 8 pins on the supervisor. Among other features, IC power can be also taken advantage of [0], for instance. This supervisor includes other kinds of integrated circuits, such as POWER SUPPLY SUPPORT CIRCUIT as well as other kinds. IC management operates at a minimum of -40°C.

TL7712AID Features

TL7712AID Applications

There are a lot of Texas Instruments
TL7712AID Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors

MCP121T-270E/LBG Overview

When 1 is applied to the power ic, it conducts. Supply voltage (Vsup) should be at least 1V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. There is a 20μA supply current present in the power management.

MCP121T-270E/LBG Features

Minimum supply voltage of 1V
20μA operating supply current

MCP121T-270E/LBG Applications

There are a lot of Microchip Technology
MCP121T-270E/LBG Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system

V62/03629-02YE Overview

There are 8 terminals connected to this power management, which makes it easy to mount. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 3 channels, each of which can be used independently. For your reference, this PMIC includes a list of MSOP functions. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 8. There are 8 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The supply current of the power management is 40μA. Among other features, IC power can be also taken advantage of [0], for instance. This supervisor includes other kinds of integrated circuits, such as POWER SUPPLY SUPPORT CIRCUIT as well as other kinds. At most, voltage supervisor can operate at a supply temperature of 40μA. With 3 elements, this supervisor is used in all areas of target applications.

V62/03629-02YE Features

Minimum supply voltage of 2V
40μA operating supply current

V62/03629-02YE Applications

There are a lot of Texas Instruments
V62/03629-02YE Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors

MCP121T-450E/TTG Overview

As a reference, this IC power includes SOT-23 functions for your convenience. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Supplied with a operating current of 20μA, this PMIC is capable of fully function as specified.

MCP121T-450E/TTG Features

Minimum supply voltage of 1V
20μA operating supply current

MCP121T-450E/TTG Applications

There are a lot of Microchip Technology
MCP121T-450E/TTG Voltage Supervisors applications.

• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics
• Personal computers

UC3842D Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 14 in total. In this IC power you will find 1 functions for you to refer to. In this IC management you will find SO functions for you to refer to. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT SPECIFIED. Surface Mount is the one that mounts power management. There is a subcategory called Switching Regulator or Controllers for this power management. In total, the power management has 14 pins in it. This power management system has 14 pins. Besides the IC types mentioned above, the power management system also includes other types such as SWITCHING CONTROLLER. IC management is capable of operating at a maximum temperature of 70°C. The architecture of this IC power provides 1 outputs.

UC3842D Features

UC3842D Applications

There are a lot of STMicroelectronics
UC3842D Voltage Supervisors applications.

• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics

TPS5511D Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. The purpose of this IC management is to provide you with a reference of 1 functions. There are 3 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SOIC functions. As specified in the package specification, the peak reflow temperature of the package is set at NOT SPECIFIED. When a supply voltage of 5V is applied to the power ic, it conducts. The power management belongs to the Power Management Circuits subcategory. A total of 8 pins are located on this power management. 8 pins are present on the power management system. There are other types of IC included in the power managment ic, such as types POWER SUPPLY SUPPORT CIRCUIT. The voltage supervisor requires a power source of 5V volts in order to work correctly. The maximum operating temperature is 125°C. At the very least, PMIC chip operates at a temperature of -40°C while working.

TPS5511D Features

TPS5511D Applications

There are a lot of Texas Instruments
TPS5511D Voltage Supervisors applications.

• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules

TL7759CDE4 Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of D functions. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 4.3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The power management belongs to the Power Management Circuits subcategory. A total of 8 pins are located on this power management. 8 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). For this power management, there is an 1.4mA volt supply current. There are other types of IC included in the power managment ic, such as types POWER SUPPLY SUPPORT CIRCUIT. The maximum supply temperature voltage supervisor can handle is 2mA.

TL7759CDE4 Features

Minimum supply voltage of 1V
1.4mA operating supply current

TL7759CDE4 Applications

There are a lot of Texas Instruments
TL7759CDE4 Voltage Supervisors applications.

• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules

MCP102T-475E/LBG Overview

There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Supplied with a operating current of 1.75μA, this PMIC is capable of fully function as specified.

MCP102T-475E/LBG Features

Minimum supply voltage of 1V
1.75μA operating supply current

MCP102T-475E/LBG Applications

There are a lot of Microchip Technology
MCP102T-475E/LBG Voltage Supervisors applications.

• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics
• Personal computers

TPS3824-50DBVRG4 Overview

It is mounted through 5 terminals on the power management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are SOT-23 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3.3V. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. As far as the supply current of the power management is concerned, it is 15μA. The maximum supply temperature that PMIC chip can work with is 25μA. There are 1 elements to this supervisor, which can be used in a variety of applications.

TPS3824-50DBVRG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current

TPS3824-50DBVRG4 Applications

There are a lot of Texas Instruments
TPS3824-50DBVRG4 Voltage Supervisors applications.

• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging

TLC7725IPWRG4 Overview

As you can see, this power management is mounted through 8 terminals. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes TSSOP functions. According to the specification, the package's peak reflow temperature is specified to be 260. When 5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. Supply voltage (Vsup) should be at least 2V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. There is a 9μA supply current present in the power management. There are also other features in the software such as [0], just to mention a few. It also contains ICs of other kinds, such as POWER SUPPLY SUPPORT CIRCUIT, which are included in the power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 16μA.

TLC7725IPWRG4 Features

Minimum supply voltage of 2V
9μA operating supply current

TLC7725IPWRG4 Applications

There are a lot of Texas Instruments
TLC7725IPWRG4 Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system