Strain Gauges(8327)

SM72240/NOPB Overview

Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Power management conducts at a voltage of 1. 5 pins are on the supervisor. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by SM72240. The IC power that you are looking at comes from our well-known SolarMagic™ series product line.

SM72240/NOPB Features

Simple Reset/Power-On Reset type

SM72240/NOPB Applications

There are a lot of Texas Instruments
SM72240/NOPB Voltage Supervisors applications.

• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission

MIC2787-XDYMT-TR Overview

Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 8-UFDFN Exposed Pad, 8-TMLF® functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. 8 pins are on the supervisor. It is recommended that Vsup should not be less than 1.6V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. To find similar IC managements from the manufacturer, you can always search by MIC2787.

MIC2787-XDYMT-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V

MIC2787-XDYMT-TR Applications

There are a lot of Microchip Technology
MIC2787-XDYMT-TR Voltage Supervisors applications.

• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission

MIC2786-XAYMT-TR Overview

Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 8-UFDFN Exposed Pad, 8-TMLF® functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.6V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain, Push-Pull from this supervisor when it is operating. If you want to search for similar IC managements of this manufacturer, you can always refer to MIC2786, which is the base power ics number.

MIC2786-XAYMT-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V

MIC2786-XAYMT-TR Applications

There are a lot of Microchip Technology
MIC2786-XAYMT-TR Voltage Supervisors applications.

• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging

MIC2789-XYMT-TR Overview

It is packaged with Tape & Reel (TR). As a reference, this IC power includes 8-UFDFN Exposed Pad, 8-TMLF® functions for your convenience. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. Pin count of the power management is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.6V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Open Drain, Push-Pull. To find similar IC managements from the manufacturer, you can always search by MIC2789.

MIC2789-XYMT-TR Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1.6V

MIC2789-XYMT-TR Applications

There are a lot of Microchip Technology
MIC2789-XYMT-TR Voltage Supervisors applications.

• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics
• Personal computers

ATA5021-TAPY 44 Overview

A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are a number of benefits that this PMIC has in common with other Watchdog Circuit manage ics. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. You can always use ATA5021, the base supervisor number, to search for similar PMICs of the manufacturer.

ATA5021-TAPY 44 Features

Watchdog Circuit type

ATA5021-TAPY 44 Applications

There are a lot of Microchip Technology
ATA5021-TAPY 44 Voltage Supervisors applications.

• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module

LP3470IM5X-2.83 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 5 pins in it. This power management system has 5 pins. A voltage (Vsup) that doesn't fall below 500mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 16μA is the recommended value. Supervisors are also additional features, such as [0] for example, which are worth mentioning. To find similar IC managements from the manufacturer, you can always search by LP3470.

LP3470IM5X-2.83 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current

LP3470IM5X-2.83 Applications

There are a lot of Texas Instruments
LP3470IM5X-2.83 Voltage Supervisors applications.

• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics

LP3470M5X-2.93 Overview

There are 5 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 1V-voltage supply. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. There are 5 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 500mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -20°C~85°C TJ. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supply current of the power management is 16μA. Among other features, IC power can be also taken advantage of [0], for instance. To find similar IC managements from the manufacturer, you can always search by LP3470.

LP3470M5X-2.93 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current

LP3470M5X-2.93 Applications

There are a lot of Texas Instruments
LP3470M5X-2.93 Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors

LM8365BALMFX45 Overview

There are 5 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 1.5V-voltage supply. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. There are 5 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by LM8365.

LM8365BALMFX45 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

LM8365BALMFX45 Applications

There are a lot of Texas Instruments
LM8365BALMFX45 Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors

LM3710YQMM-232 Overview

There are 10 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 2 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 1.2V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. A total of 10 pins are located on this power management. 10 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TJ. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 28μA volt supply current. To find similar IC managements from the manufacturer, you can always search by LM3710.

LM3710YQMM-232 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
28μA operating supply current

LM3710YQMM-232 Applications

There are a lot of Texas Instruments
LM3710YQMM-232 Voltage Supervisors applications.

• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules

LP3470M5-4.38 Overview

It is mounted through 5 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 1V. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 500mV. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -20°C~85°C TJ. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 16μA. The other features include, for example, [0], which is just one example. If you want to search for similar IC managements of this manufacturer, you can always refer to LP3470, which is the base power ics number.

LP3470M5-4.38 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current

LP3470M5-4.38 Applications

There are a lot of Texas Instruments
LP3470M5-4.38 Voltage Supervisors applications.

• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging

LM3724IM5X-3.08 Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 2.5V. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. 5 pins are present in total in this power management. 5 pins are on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The power management's supply current is 10μA. To find similar IC managements from the manufacturer, you can always search by LM3724. To be able to work, this power management requires 3.3V volts of power. A maximum supply temperature of 10μA can be used.

LM3724IM5X-3.08 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current

LM3724IM5X-3.08 Applications

There are a lot of Texas Instruments
LM3724IM5X-3.08 Voltage Supervisors applications.

• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission

ATA5021-TAQY Overview

This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. Compared to other Watchdog Circuit products, this PMIC has a lot of benefits to offer. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. Power managment ic pin count is 8. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is always advisable to use ATA5021, the base supervisor number, when searching for similar PMICs from the manufacturer.

ATA5021-TAQY Features

Watchdog Circuit type

ATA5021-TAQY Applications

There are a lot of Microchip Technology
ATA5021-TAQY Voltage Supervisors applications.

• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system

MIC2787-XAYMT-TR Overview

Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 8-UFDFN Exposed Pad, 8-TMLF® functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain, Push-Pull from this supervisor when it is operating. If you want to search for similar IC managements of this manufacturer, you can always refer to MIC2787, which is the base power ics number.

MIC2787-XAYMT-TR Features

Simple Reset/Power-On Reset type

MIC2787-XAYMT-TR Applications

There are a lot of Microchip Technology
MIC2787-XAYMT-TR Voltage Supervisors applications.

• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging

TC54VC3302EZB Overview

There are 3 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Bulk model. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 2.1V-voltage supply. IC management conducts in a 1-voltage supply. The recommended mounting type is Through Hole. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole.

TC54VC3302EZB Features

Simple Reset/Power-On Reset type

TC54VC3302EZB Applications

There are a lot of Microchip Technology
TC54VC3302EZB Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors

TC54VC2502EZB Overview

As you can see, this power management is mounted through 3 terminals. There is a Bulk-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes TO-226-3, TO-92-3 (TO-226AA) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be NOT SPECIFIED. When 2.1V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. A Through Hole mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole.

TC54VC2502EZB Features

Simple Reset/Power-On Reset type

TC54VC2502EZB Applications

There are a lot of Microchip Technology
TC54VC2502EZB Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system

TC54VC4802EZB Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Bulk-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at NOT SPECIFIED. When a supply voltage of 2.1V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The power management belongs to the Power Management Circuits subcategory. A total of 3 pins are located on this power management. Power management recommends the Through Hole mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage.

TC54VC4802EZB Features

Simple Reset/Power-On Reset type

TC54VC4802EZB Applications

There are a lot of Microchip Technology
TC54VC4802EZB Voltage Supervisors applications.

• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules

TC54VC5202EZB Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaged in the form of a Bulk, power management is easy to use. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. IC management conducts at a voltage of 2.1V. Power management conducts at a voltage of 1. 3 pins are present in total in this power management. In this case, Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole.

TC54VC5202EZB Features

Simple Reset/Power-On Reset type

TC54VC5202EZB Applications

There are a lot of Microchip Technology
TC54VC5202EZB Voltage Supervisors applications.

• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission

TC54VN4402EZB Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Bulk-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at NOT SPECIFIED. When a supply voltage of 2.1V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Power management recommends the Through Hole mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage.

TC54VN4402EZB Features

Simple Reset/Power-On Reset type

TC54VN4402EZB Applications

There are a lot of Microchip Technology
TC54VN4402EZB Voltage Supervisors applications.

• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules

TC54VC3502EZB Overview

Power management is mounted through 3 terminals. Power management is packaged in a Bulk way. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a TO-226-3, TO-92-3 (TO-226AA) package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be NOT SPECIFIED. The supervisor is always powered by a 2.1V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Power management has a total of 3 pins. The mounting type of the supervisors is Through HoleThe temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation.

TC54VC3502EZB Features

Simple Reset/Power-On Reset type

TC54VC3502EZB Applications

There are a lot of Microchip Technology
TC54VC3502EZB Voltage Supervisors applications.

• Power distribution systems of operating room
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment

TC54VC2602EZB Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaged in the form of a Bulk, power management is easy to use. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. IC management conducts at a voltage of 2.1V. Power management conducts at a voltage of 1. 3 pins are present in total in this power management. In this case, Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole.

TC54VC2602EZB Features

Simple Reset/Power-On Reset type

TC54VC2602EZB Applications

There are a lot of Microchip Technology
TC54VC2602EZB Voltage Supervisors applications.

• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission

TC54VN3202EZB Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Bulk. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT SPECIFIED. A supply voltage of 2.1V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 3 pins in it. The recommended mounting type for IC management is Through Hole. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage.

TC54VN3202EZB Features

Simple Reset/Power-On Reset type

TC54VN3202EZB Applications

There are a lot of Microchip Technology
TC54VN3202EZB Voltage Supervisors applications.

• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics

TC54VN4702EZB Overview

There are 3 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Bulk model. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. IC management conducts in a 2.1V-voltage supply. IC management conducts in a 1-voltage supply. The recommended mounting type is Through Hole. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector.

TC54VN4702EZB Features

Simple Reset/Power-On Reset type

TC54VN4702EZB Applications

There are a lot of Microchip Technology
TC54VN4702EZB Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors

TC54VC2902EZB713 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT SPECIFIED. A supply voltage of 2V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. There is a subcategory called Power Management Circuits for this power management. The recommended mounting type for IC management is Through Hole. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage.

TC54VC2902EZB713 Features

Simple Reset/Power-On Reset type

TC54VC2902EZB713 Applications

There are a lot of Microchip Technology
TC54VC2902EZB713 Voltage Supervisors applications.

• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics

TC54VN1702EZB Overview

This power management consists of 3 mounting terminals on which it can be mounted. It is packaged with Bulk. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of NOT SPECIFIED. There is a voltage supply of 2.1V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. Power management' mounting is recommended to be done with the Through Hole type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Open Drain or Open Collector.

TC54VN1702EZB Features

Simple Reset/Power-On Reset type

TC54VN1702EZB Applications

There are a lot of Microchip Technology
TC54VN1702EZB Voltage Supervisors applications.

• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics
• Personal computers