Strain Gauges(8327)

LM809M3X-2.45/NOPB Overview

A total of 3 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 3V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 3 pins on power management. Power managment ic pin count is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~105°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is always advisable to use LM809, the base supervisor number, when searching for similar PMICs from the manufacturer.

LM809M3X-2.45/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

LM809M3X-2.45/NOPB Applications

There are a lot of Texas Instruments
LM809M3X-2.45/NOPB Voltage Supervisors applications.

• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system

LP3470M5-2.75/NOPB Overview

Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. 5 pins make up the power management. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -20°C~85°C TJ. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. If you want to search for similar IC managements of this manufacturer, you can always refer to LP3470, which is the base power ics number.

LP3470M5-2.75/NOPB Features

Simple Reset/Power-On Reset type

LP3470M5-2.75/NOPB Applications

There are a lot of Texas Instruments
LP3470M5-2.75/NOPB Voltage Supervisors applications.

• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging

LM3704YCMMX-232 Overview

As you can see, this power management is mounted through 10 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. It has a total of 10 pins that are attached to IC management. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using LM3704, the base power ics number.

LM3704YCMMX-232 Features

Simple Reset/Power-On Reset type

LM3704YCMMX-232 Applications

There are a lot of Texas Instruments
LM3704YCMMX-232 Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system

MCP809M3-2.63/NOPB Overview

There are 3 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3V-voltage supply. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. There are 3 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. To find similar IC managements from the manufacturer, you can always search by MCP809.

MCP809M3-2.63/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

MCP809M3-2.63/NOPB Applications

There are a lot of Texas Instruments
MCP809M3-2.63/NOPB Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors

MCP810M3-4.38/NOPB Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 3V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. This power management system has 3 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~105°C TA. To find similar IC managements from the manufacturer, you can always search by MCP810.

MCP810M3-4.38/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

MCP810M3-4.38/NOPB Applications

There are a lot of Texas Instruments
MCP810M3-4.38/NOPB Voltage Supervisors applications.

• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics

LP3470M5X-3.65/NOPB Overview

There are 5 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 2.4V-voltage supply. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -20°C~85°C TJ. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by LP3470. The power management must be powered by 2.4/5V volts to function properly.

LP3470M5X-3.65/NOPB Features

Simple Reset/Power-On Reset type

LP3470M5X-3.65/NOPB Applications

There are a lot of Texas Instruments
LP3470M5X-3.65/NOPB Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors

LP3470IM5X-3.65/NOPB Overview

A total of 5 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 2.4V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TJ . The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is always advisable to use LP3470, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 2.4/5V volts of power in order for this voltage supervisor to operate.

LP3470IM5X-3.65/NOPB Features

Simple Reset/Power-On Reset type

LP3470IM5X-3.65/NOPB Applications

There are a lot of Texas Instruments
LP3470IM5X-3.65/NOPB Voltage Supervisors applications.

• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system

LMS33460MGX/NOPB Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find 5-TSSOP, SC-70-5, SOT-353 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1.5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 5 pins in it. This power management system has 5 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 7V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. To find similar IC managements from the manufacturer, you can always search by LMS33460.

LMS33460MGX/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

LMS33460MGX/NOPB Applications

There are a lot of Texas Instruments
LMS33460MGX/NOPB Voltage Supervisors applications.

• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics

LM3702XCBPX-308 Overview

Power management is mounted through 9 terminals. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a 9-VFBGA package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. Power management has a total of 9 pins. The pins of the power management system count 9. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TJ. Power management has an output of Push-Pull, Totem Pole during operation. There are other features such as RESET THRESHOLD VOLTAGE IS 3.08 V; SEATED HGT-NOM to name a few. For similar manage ics search of the manufacturer, you can always refer to LM3702, the base PMIC number.

LM3702XCBPX-308 Features

Simple Reset/Power-On Reset type

LM3702XCBPX-308 Applications

There are a lot of Texas Instruments
LM3702XCBPX-308 Voltage Supervisors applications.

• Power distribution systems of operating room
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment

LM3708XQTPX-308/NOPB Overview

Tape & Reel (TR)-packaging is used. The purpose of this IC power is to provide you with a reference of 9-UFBGA functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. 9 pins are present on the power management system. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TJ. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. To find similar IC managements from the manufacturer, you can always search by LM3708.

LM3708XQTPX-308/NOPB Features

Simple Reset/Power-On Reset type

LM3708XQTPX-308/NOPB Applications

There are a lot of Texas Instruments
LM3708XQTPX-308/NOPB Voltage Supervisors applications.

• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules

LM3722IM5X-4.63/NOPB Overview

A total of 5 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 5V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. Power managment ic pin count is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is always advisable to use LM3722, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate.

LM3722IM5X-4.63/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

LM3722IM5X-4.63/NOPB Applications

There are a lot of Texas Instruments
LM3722IM5X-4.63/NOPB Voltage Supervisors applications.

• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system

LM3722IM5X-2.32/NOPB Overview

Power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a SC-74A, SOT-753 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 2.5V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 5 pins. The pins of the power management system count 5. IC management can only work with a supply voltage of 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. For similar manage ics search of the manufacturer, you can always refer to LM3722, the base PMIC number.

LM3722IM5X-2.32/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

LM3722IM5X-2.32/NOPB Applications

There are a lot of Texas Instruments
LM3722IM5X-2.32/NOPB Voltage Supervisors applications.

• Power distribution systems of operating room
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment

STM1403CSMQ6F Overview

There are 16 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 16-VFQFN Exposed Pad functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. In a 3.3V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 16 pins on IC management. There are 16 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 2.2V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.6V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a supply current of 45μA for the power management. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few. You can always use STM1403, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 2.5/3.3V volts of power. At the most, voltage supervisor can work with a supply temperature of 45μA.

STM1403CSMQ6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.2V
45μA operating supply current

STM1403CSMQ6F Applications

There are a lot of STMicroelectronics
STM1403CSMQ6F Voltage Supervisors applications.

• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module

2U3809K33QDBVRG4Q1 Overview

There are 3 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 3. There are 3 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supply current of the power management is 30μA. To find similar IC managements from the manufacturer, you can always search by 3809K33. At most, voltage supervisor can operate at a supply temperature of 30μA. As the name implies, this supervisor is a kind of the famous Automotive, AEC-Q100 series product line.

2U3809K33QDBVRG4Q1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
30μA operating supply current

2U3809K33QDBVRG4Q1 Applications

There are a lot of Texas Instruments
2U3809K33QDBVRG4Q1 Voltage Supervisors applications.

• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors

STM1403CSNQ6F Overview

There are 16 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 16-VFQFN Exposed Pad functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. A total of 16 pins are located on this power management. 16 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2.2V volts. This IC power should be powered by no more than 3.6V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 45μA volt supply current. Additionally, IC management are a variety of features, for example [0], to name a few. To find similar IC managements from the manufacturer, you can always search by STM1403. The voltage supervisor requires a power source of 2.5/3.3V volts in order to work correctly. The maximum supply temperature voltage supervisor can handle is 45μA.

STM1403CSNQ6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.2V
45μA operating supply current

STM1403CSNQ6F Applications

There are a lot of STMicroelectronics
STM1403CSNQ6F Voltage Supervisors applications.

• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules

2T09J25QDBVRG4Q Overview

A total of 3 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 3.3V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 3 pins on power management. Power managment ic pin count is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 30μA. It is always advisable to use 09J25, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 2.5V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 30μA can be used with this power management.

2T09J25QDBVRG4Q Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
30μA operating supply current

2T09J25QDBVRG4Q Applications

There are a lot of Texas Instruments
2T09J25QDBVRG4Q Voltage Supervisors applications.

• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system

STM1403CTNQ6F Overview

It is mounted through 16 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are 16-VFQFN Exposed Pad functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3.3V. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 16 pins on the board. 16 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2.2V. Voltage (Vsup) shouldn't exceed 3.6V volts in this PMIC. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 45μA. The other features include, for example, [0], which is just one example. If you want to search for similar IC managements of this manufacturer, you can always refer to STM1403, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 45μA.

STM1403CTNQ6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.2V
45μA operating supply current

STM1403CTNQ6F Applications

There are a lot of STMicroelectronics
STM1403CTNQ6F Voltage Supervisors applications.

• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging

2U3836L30QDBVRG4Q1 Overview

There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. A total of 5 pins are located on this power management. 5 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.6V volts. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 25μA volt supply current. To find similar IC managements from the manufacturer, you can always search by 3836L30. The voltage supervisor requires a power source of 3V volts in order to work correctly. The maximum supply temperature voltage supervisor can handle is 25μA. As you can see, this IC power comes from the well-known Automotive, AEC-Q100 series of products.

2U3836L30QDBVRG4Q1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
25μA operating supply current

2U3836L30QDBVRG4Q1 Applications

There are a lot of Texas Instruments
2U3836L30QDBVRG4Q1 Voltage Supervisors applications.

• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules

2U3823-25QDBVRG4Q1 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 2.5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 5 pins in it. This power management system has 5 pins. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 25μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by 382325. The power management can work with a maximum supply temperature of 25μA. Located in the well-known Automotive, AEC-Q100 series product line, this IC management is a kind of this series.

2U3823-25QDBVRG4Q1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
25μA operating supply current

2U3823-25QDBVRG4Q1 Applications

There are a lot of Texas Instruments
2U3823-25QDBVRG4Q1 Voltage Supervisors applications.

• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics

2T25-50QFRG4Q1 Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 5V. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. 5 pins are present in total in this power management. 5 pins are on the supervisor. It is recommended that Vsup should not be less than 1.1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 25μA. To find similar IC managements from the manufacturer, you can always search by 2550. A maximum supply temperature of 25μA can be used. The IC power that you are looking at comes from our well-known Automotive, AEC-Q100 series product line.

2T25-50QFRG4Q1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
25μA operating supply current

2T25-50QFRG4Q1 Applications

There are a lot of Texas Instruments
2T25-50QFRG4Q1 Voltage Supervisors applications.

• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission

UC3903NG4 Overview

A Tube package is used to package the power management. In this PMIC, you can find 18-DIP (0.300, 7.62mm) functions for your reference. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. In a 4 supply voltage, the PMIC chip conducts. There are 18 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 8V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 40V volts. Through Hole is the recommended mounting type. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a supply current of 7mA for the power management. You can always use UC3903, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 18mA.

UC3903NG4 Features

Multi-Voltage Supervisor type
Minimum supply voltage of 8V
7mA operating supply current

UC3903NG4 Applications

There are a lot of Texas Instruments
UC3903NG4 Voltage Supervisors applications.

• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module

UCC3946NG4 Overview

It is mounted through 8 terminals on the power management. Packaged in a Tube-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1. Using Through Hole, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Through Hole mounting is recommended. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. If you want to search for similar IC managements of this manufacturer, you can always refer to UCC3946, which is the base power ics number. There is a requirement for 2.5/5V power to power this power management. The maximum supply temperature that PMIC chip can work with is 18μA.

UCC3946NG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V

UCC3946NG4 Applications

There are a lot of Texas Instruments
UCC3946NG4 Voltage Supervisors applications.

• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging

TPS3618-50DGKRG4 Overview

Power management is mounted through 8 terminals. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. This IC power shares lots of benefits with other Battery Backup Circuit products. The supervisor is always powered by a 5V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 8 pins. The pins of the power management system count 8. IC management can only work with a supply voltage of 1.65V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TJ. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 40μA. For similar manage ics search of the manufacturer, you can always refer to TPS3618, the base PMIC number. Voltage supervisor can work with a supply temperature of 40μA at the most.

TPS3618-50DGKRG4 Features

Battery Backup Circuit type
Minimum supply voltage of 1.65V
40μA operating supply current

TPS3618-50DGKRG4 Applications

There are a lot of Texas Instruments
TPS3618-50DGKRG4 Voltage Supervisors applications.

• Power distribution systems of operating room
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment

2U3838L30QDBVRG4Q1 Overview

A total of 5 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 1.8V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. Power managment ic pin count is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.6V. There should be no more than 6V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 25μA. It is always advisable to use 3838L30, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 3V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 25μA can be used with this power management. As you may know, this PMIC comes from the well-known Automotive, AEC-Q100 series product line.

2U3838L30QDBVRG4Q1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
25μA operating supply current

2U3838L30QDBVRG4Q1 Applications

There are a lot of Texas Instruments
2U3838L30QDBVRG4Q1 Voltage Supervisors applications.

• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system

STM1404ATOHQ6F Overview

Power management is mounted through 16 terminals. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a 16-VFQFN Exposed Pad package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 3V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 16 pins. The pins of the power management system count 16. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. For similar manage ics search of the manufacturer, you can always refer to STM1404, the base PMIC number. This power management requires 2.5/3.3V power to work.

STM1404ATOHQ6F Features

Simple Reset/Power-On Reset type

STM1404ATOHQ6F Applications

There are a lot of STMicroelectronics
STM1404ATOHQ6F Voltage Supervisors applications.

• Power distribution systems of operating room
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment

LM3710XQTP-308/NOPB Overview

It is packaged with Tape & Reel (TR). As a reference, this IC power includes 9-VFBGA functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. Pin count of the power management is 9. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TJ degrees. During operation, this power management system outputs Push-Pull, Totem Pole. To find similar IC managements from the manufacturer, you can always search by LM3710. The power management system contains 1 elements and has been extensively used in all aspects of target applications.

LM3710XQTP-308/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

LM3710XQTP-308/NOPB Applications

There are a lot of Texas Instruments
LM3710XQTP-308/NOPB Voltage Supervisors applications.

• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics
• Personal computers

LM3702YATPX-290/NOPB Overview

It is packaged with Tape & Reel (TR). As a reference, this IC power includes 9-VFBGA functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. Pin count of the power management is 9. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TJ degrees. During operation, this power management system outputs Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by LM3702.

LM3702YATPX-290/NOPB Features

Simple Reset/Power-On Reset type

LM3702YATPX-290/NOPB Applications

There are a lot of Texas Instruments
LM3702YATPX-290/NOPB Voltage Supervisors applications.

• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system
• Sensitive sensors
• Efficient information transmission
• Functional modules
• Consumer electronics
• Personal computers

SM72240X/NOPB Overview

Power management is packaged in a Tape & Reel (TR) way. IC management is packaged as a SC-74A, SOT-753 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is possible to find a succession of 1 voltages that have been checked. The pins of the power management system count 5. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. For similar manage ics search of the manufacturer, you can always refer to SM72240, the base PMIC number. It is one of the well-known SolarMagic™ series power ic line.

SM72240X/NOPB Features

Simple Reset/Power-On Reset type

SM72240X/NOPB Applications

There are a lot of Texas Instruments
SM72240X/NOPB Voltage Supervisors applications.

• Power distribution systems of operating room
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment

SM72240E/NOPB Overview

This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Power ics operate at 1 supply voltages. Power managment ic pin count is 5. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is always advisable to use SM72240, the base supervisor number, when searching for similar PMICs from the manufacturer. As you may know, this PMIC comes from the well-known SolarMagic™ series product line.

SM72240E/NOPB Features

Simple Reset/Power-On Reset type

SM72240E/NOPB Applications

There are a lot of Texas Instruments
SM72240E/NOPB Voltage Supervisors applications.

• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system