My CartSpecialized Sensors(1703)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Ultralife | LM331AN/NOPB OverviewLocated within the 8-DIP (0.300, 7.62mm) package, it can be found here. The electronic part is located in the direction of Through Hole. There is a package in the way of Tube. An electrical device of the type Voltage to Frequency is being used. As a matter of fact, there are 8 terminations, which involve terminating a transmission line with a device which matches its characteristic impedance. In addition, it is equipped with a pin count of 8. Power is provided to the device by a supply voltage of 5V. Parts that are related to the base part number can be identified. There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The temperature at which the device operates must not exceed 0°C in order for it to ensure reliability. To ensure its reliability, it operates at a maximum operating temperature of 70°C. Through Hole mounted in the way. There is a part included in Analog Special Function Converters. This should be used if the supply voltage (Vsup) exceeds 4V. It is ensured that the supply voltage (Vsup) reaches the maximum value 40V. 100kHz is the frequency at which it operates. There is a type Single supply on this electronic part. This electronic part has a maximally negative input type of -0.2V. A 5V power supply is used to operate the device. LM331AN/NOPB Features8-DIP (0.300, 7.62mm) package 8 terminations 8 pin count 8 pins 5V power supplies LM331AN/NOPB ApplicationsThere are a lot of Texas Instruments LM331AN/NOPB V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM2917M-8/NOPB OverviewThe package 8-SOIC (0.154, 3.90mm Width) includes it. The electronic component is mounted in the direction of Surface Mount. As described in Tube, it is packaged in this way. There is a device of the type Frequency to Voltage being used. The 8 termination of a transmission line is the practice of terminating it with a device whose characteristic impedance matches that of the transmission line. It is equipped with 8 pin count. It is powered from a supply voltage of 12V. The base part number can be used to establish parts related to it. There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. Consequently, it operates at a minimum operating temperature of -40°C to ensure its reliability. It operates with the maximal operating temperature of 85°C to ensure its reliability. Surface Mount mounted in the way. Analog Special Function Converters contains this part. If the supply voltage (Vsup) is greater than 6V, then it should be used. When 28V is reached, the maximum supply voltage (Vsup) is reached. In this case, the maximum frequency is 10kHz. There is a voltage of 12V on the operating supply of this electrical device. The type of supply for this electronic component is Single. A maximal supply current of 6mA is used to operate it. 8.3V is supported as an output voltage. LM2917M-8/NOPB Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 8 pins The maximal supply current of 6mA LM2917M-8/NOPB ApplicationsThere are a lot of Texas Instruments LM2917M-8/NOPB V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | VFC110AP OverviewAs part of the 14-DIP (0.300, 7.62mm) package, it is embedded. Located in Through Hole, this electronic component is mounted. There is a package in the way of Tube. Voltage to Frequency is the type of this electrical device. Termination in 14 refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. This device has a pin count of 14. There is a supply voltage of 15V supplying power to the device. As a result of the base part number, the related parts can be identified. A computer or other communication device may have 14 pins, which are pronged contacts. To ensure its reliability, it operates at a minimal operating temperature of -25°C. To ensure its reliability, it operates at a maximum operating temperature of 85°C. A Through Hole mounting is used. This part is included in Analog Special Function Converters. It operates with the frequency of 400MHz. This electrical device is powered by 15V voltage. The device is powered by dual voltages of 15V. The supply type of this electronic part is Dual. Using 16mA as the maximum supply current, it operates. 14V is the output voltage supported by the device. This electrical device has a bandwidth of 4MHz. VFC110AP Features14-DIP (0.300, 7.62mm) package 14 terminations 14 pin count 14 pins A dual supply voltage of 15V The maximal supply current of 16mA VFC110AP ApplicationsThere are a lot of Texas Instruments VFC110AP V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM2907M/NOPB OverviewLocated within the 14-SOIC (0.154, 3.90mm Width) package, it can be found here. The electronic part is located in the direction of Surface Mount. Currently, there is a package in the way of Tube. An electrical device of this type is designated as Frequency to Voltage. A 14 termination involves terminating a transmission line with a device that matches its characteristic impedance. The device is equipped with a 14 pin count. A supply voltage of 12V powers it. As a result of the base part number, the related parts can be identified. 14 pins are pronged contacts located on the signal interface of a computer or other communication device. To ensure its reliability, it must operate at a minimum operating temperature of -40°C. As a precaution, it operates at the maximum operating temperature of 85°C in order to maintain its reliability. Mounted in the way of Surface Mount. As part of Analog Special Function Converters, this part is included. If the supply voltage (Vsup) is greater than 6V, then it should be used. The maximal supply voltage (Vsup) reaches 28V. There is a frequency 10kHz that it operates at. This electrical device is powered by 12V voltage. In this electronic part, the supply type is Single. Using 6mA as the maximum supply current, it operates. LM2907M/NOPB Features14-SOIC (0.154, 3.90mm Width) package 14 terminations 14 pin count 14 pins The maximal supply current of 6mA LM2907M/NOPB ApplicationsThere are a lot of Texas Instruments LM2907M/NOPB V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| APS | TC9401EJD OverviewIt is embedded in the 14-CDIP (0.300, 7.62mm) package. A part of this electronic device is mounted in the manner indicated by Through Hole. As described in Tube, it is packaged in this way. An electrical device of the type Volt to Frequency and Frequency to Volt is being used. As a result of the base part number, the related parts can be identified. There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. A minimum operating temperature of -40°C is required to ensure its reliability during operation. To ensure its reliability, it operates at a maximum operating temperature of 85°C. There is a mounting in the way of Through Hole. It is recommended that the supply voltage (Vsup) exceed 8V. There is a maximal supply voltage (Vsup) reaching 15V. The frequency at which it operates is given by 100kHz. It operates at a maximum frequency of 100kHz. Power is supplied by a dual supply voltage of 5V. TC9401EJD Features14-CDIP (0.300, 7.62mm) package 14 pins A dual supply voltage of 5V TC9401EJD ApplicationsThere are a lot of Microchip Technology TC9401EJD V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| APS | TC9400CPD OverviewIt is embedded in the 14-DIP (0.300, 7.62mm) package. Located in Through Hole, this electronic component is mounted. It is packaged in the way of Tube. Currently, an electrical device of type Volt to Frequency and Frequency to Volt is being used. As an alternative to 14 terminations, there are devices that match the characteristic impedance of transmission lines. The device is equipped with a 14 pin count. An electrical supply of voltage 5V supplies power to the device. It is possible to identify related parts based on the base part number. 14 pins are pronged contacts found in computer or other communication devices, as part of a signal interface. For the purpose of ensuring the reliability of the device, it operates at a minimum operating temperature of 0°C. As a measure to ensure its reliability, it operates at a maximum operating temperature of 70°C. Mounted in the direction of Through Hole. The supply voltage (Vsup) should be greater than 8V if it is suitable for use. There is a maximal supply voltage (Vsup) reaching 15V. The frequency of operation is 100kHz. It is powered by a dual supply voltage of 5V. Input type -2V is the maximum negative input type for this electronic part. It supports the output voltage of 18V. This electrical device has a bandwidth of 100 kHz. TC9400CPD Features14-DIP (0.300, 7.62mm) package 14 terminations 14 pin count 14 pins A dual supply voltage of 5V TC9400CPD ApplicationsThere are a lot of Microchip Technology TC9400CPD V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM2907N-8 OverviewLocated within the 8-DIP (0.300, 7.62mm) package, it can be found here. The electronic part is mounted in the direction of Through Hole. There is a package in the way of Tube. The type of this electrical device is Frequency to Voltage. There is a technique known as 8 termination, in which a transmission line is terminated with a device that matches its characteristic impedance. The device is equipped with a pin count of 8. 12V is the supply voltage that supplies power to the device. The base part number can be used to establish parts related to it. In computers and other communications devices, there are 8 pins, which are pronged contacts. This device is designed to operate at a minimum operating temperature -40°C to ensure its reliability. In order to ensure the reliability of the device, it operates at the maximum operating temperature of 85°C. A Through Hole mounting is used. In Analog Special Function Converters, this part is included. This should be used if the supply voltage (Vsup) exceeds 12V. Currently, the maximum supply voltage (Vsup) reaches 28V. The frequency at which it operates is given by 5kHz. It is necessary to supply 25mA with a current so that it can fully perform its function. There is an output voltage of 8.3V supported by it. In this electrical device, the bandwidth is 10 kHz. LM2907N-8 Features8-DIP (0.300, 7.62mm) package 8 terminations 8 pin count 8 pins LM2907N-8 ApplicationsThere are a lot of Texas Instruments LM2907N-8 V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | RV4151NB OverviewIt is included in the 8-DIP (0.300, 7.62mm) package. The electronic part is mounted in the direction of Through Hole. It is packaged in the way of Tube. The type of this electrical device is Voltage to Frequency. As an alternative to 8 terminations, there are devices that match the characteristic impedance of transmission lines. It is equipped with 8 pin count. There are several parts that can be founded that are related to the base part number. On computers and other communication devices, there are pins called 8 pins, which are pronged contacts. To ensure its reliability, it must operate at a minimum operating temperature of -25°C. As a precaution, it operates at the maximum operating temperature of 85°C in order to maintain its reliability. Mounted in the way of Through Hole. In Analog Special Function Converters, this part is included. It is recommended that the supply voltage (Vsup) be greater than 4V. When 40V is reached, the maximum supply voltage (Vsup) is reached. This device operates at a maximum frequency of 100kHz. RV4151NB Features8-DIP (0.300, 7.62mm) package 8 terminations 8 pin count 8 pins RV4151NB ApplicationsThere are a lot of Texas Instruments RV4151NB V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | VFC32KPG4 OverviewThis is included in the 14-DIP (0.300, 7.62mm) package. A part of this electronic device is mounted in the manner indicated by Through Hole. It is packaged in the way of Tube. Volt to Frequency and Frequency to Volt is the type of electrical device. The 14 termination of a transmission line is the practice of terminating it with a device whose characteristic impedance matches that of the transmission line. 14 pins are equipped with this device. Power is provided to the device by a supply voltage of 15V. According to the base part number, its related parts can be founded. 14 pins are pronged contacts located on the signal interface of a computer or other communication device. It operates with the minimal operating temperature of 0°C to ensure its reliability. As a precaution, it operates at the maximum operating temperature of 70°C in order to maintain its reliability. Through Hole mounted in the way. In Analog Special Function Converters, this part is included. It operates at a frequency of 500kHz. There is a maximum frequency of 100kHz for this device. In this electrical device, the operating supply voltage is 15V. Power is supplied by a dual supply voltage of 15V. There is a type Dual supply on this electronic part. 6mA is the maximum supply current for this device. 10V is the output voltage supported by the device. For this electrical device, there is a bandwidth of 500 kHz. VFC32KPG4 Features14-DIP (0.300, 7.62mm) package 14 terminations 14 pin count 14 pins A dual supply voltage of 15V The maximal supply current of 6mA VFC32KPG4 ApplicationsThere are a lot of Texas Instruments VFC32KPG4 V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM2917M OverviewThe package 14-SOIC (0.154, 3.90mm Width) contains it. A component of this electronic system has been mounted in the direction of Surface Mount. Currently, there is a package in the way of Tube. Frequency to Voltage is the type of this electrical device. The 14 termination of a transmission line is the practice of terminating it with a device whose characteristic impedance matches that of the transmission line. The device is equipped with a pin count of 14. Power is provided to the device by a supply voltage of 12V. Associated parts can be founded based on the base part number. 14 pins are pronged contacts located on the signal interface of a computer or other communication device. To ensure its reliability, it must operate at a minimum operating temperature of -40°C. To ensure reliability, the device operates at a maximum operating temperature of 85°C. It is mounted in the direction of Surface Mount. In Analog Special Function Converters, this part is included. The supply voltage (Vsup) should be greater than 12V. It is ensured that the supply voltage (Vsup) reaches the maximum value 28V. It operates at a frequency of 5kHz. A maximum frequency of 10kHz is used for its operation. LM2917M Features14-SOIC (0.154, 3.90mm Width) package 14 terminations 14 pin count 14 pins LM2917M ApplicationsThere are a lot of Texas Instruments LM2917M V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM231N OverviewThis is included in the 8-DIP (0.300, 7.62mm) package. Electronic parts such as this are mounted in the direction of Through Hole. Packaged in a way consistent with Tube. Voltage to Frequency is the type of electrical device. Termination in 8 refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. This device has a pin count of 8. Providing power to the device is a supply voltage of 5V. According to the base part number, its related parts can be founded. When a computer or other communication device is attached to a signal interface, there are 8 pins, which are pronged contacts. The temperature at which the device operates must not exceed -25°C in order for it to ensure reliability. The device operates at a maximum operating temperature of 85°C in order to ensure its reliability. In Through Hole, it is mounted. The part is included in Analog Special Function Converters. It is recommended that the supply voltage (Vsup) exceed 4V. As a result, 40V is reaching its maximum supply voltage (Vsup). There is a frequency 100kHz that it operates at. This electronic part supports a maximum of two negative input types -0.2V. A 5V power supply is required for operation. LM231N Features8-DIP (0.300, 7.62mm) package 8 terminations 8 pin count 8 pins 5V power supplies LM231N ApplicationsThere are a lot of Texas Instruments LM231N V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM2907MX-8/NOPB OverviewIt is embedded in the 8-SOIC (0.154, 3.90mm Width) package. The electronic part is mounted in the direction of Surface Mount. Tape & Reel (TR) packages it in this way. Frequency to Voltage is the type of electrical device. It is possible to terminate a transmission line with a 8 termination, which is an end device that matches the line's characteristic impedance. This device has a pin count of 8. Providing power to the device is a supply voltage of 12V. It is possible to determine the related parts of a base part number. When a computer or other device is connected to the Internet, there are 8 pins, which are pronged contacts. For the sake of reliability, it is set to operate at a minimum operating temperature of -40°C. As a measure to ensure its reliability, it operates at a maximum operating temperature of 85°C. It is mounted in the direction of Surface Mount. Analog Special Function Converters contains this part. In order to ensure proper operation, the supply voltage (Vsup) should be greater than 6V. There is a maximum supply voltage (Vsup) of 28V. It operates at a maximum frequency of 10kHz. There is a voltage of 12V at which this electrical device operates. There is a type Single supply on this electronic part. When 6mA is used as the maximum supply current, it operates. LM2907MX-8/NOPB Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 8 pins The maximal supply current of 6mA LM2907MX-8/NOPB ApplicationsThere are a lot of Texas Instruments LM2907MX-8/NOPB V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM2907M-8 OverviewAs part of the 8-SOIC (0.154, 3.90mm Width) package, it is embedded. The electronic component is mounted in the direction of Surface Mount. Tube is in the way of the package. There is a type Frequency to Voltage of electrical device. The 8 termination is a technique in which a transmission line is terminated with a device whose characteristic impedance matches that of the transmission line. The device is equipped with a pin count of 8. 12V is the supply voltage that supplies power to the device. It is possible to identify related parts based on the base part number. A computer or other communication device may have 8 pins, which are pronged contacts. This device is designed to operate at a minimum operating temperature -40°C to ensure its reliability. In order to ensure its reliability, it operates at an operating temperature of 85°C. It is mounted in the direction of Surface Mount. Analog Special Function Converters includes this part. The supply voltage (Vsup) should be greater than 6V if it is suitable for use. In this case, 28V is the maximum supply voltage (Vsup). The frequency of operation is 10kHz. The operating supply of this electrical device is voltage 12V. This electronic part has the supply type Single. It operates with the maximal supply current of 6mA. It supports the output voltage of 8.3V. LM2907M-8 Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 8 pins The maximal supply current of 6mA LM2907M-8 ApplicationsThere are a lot of Texas Instruments LM2907M-8 V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM231N/NOPB OverviewThis is included in the 8-DIP (0.300, 7.62mm) package. The electronic component is mounted in the direction of Through Hole. Tube is the way it is packaged. There is a type Voltage to Frequency of electrical device. As an alternative to 8 terminations, there are devices that match the characteristic impedance of transmission lines. The device is equipped with a 8 pin count. Providing power to the device is a supply voltage of 5V. Parts that are related to the base part number can be identified. A computer or other communication device may have 8 pins, which are pronged contacts. A minimum operating temperature of -25°C is required to ensure its reliability during operation. It operates with the maximal operating temperature of 85°C to ensure its reliability. Mounted in the direction of Through Hole. This part is included in Analog Special Function Converters. This should be used if the supply voltage (Vsup) exceeds 4V. Currently, the maximum supply voltage (Vsup) reaches 40V. 100kHz is the frequency at which it operates. There is a supply type of Single for this electronic part. This electronic part supports a maximum of two negative input types -0.2V. It operates with 6mA as the maximum supply current. A 5V power supply is used to operate the device. Support is provided for the output voltage of 40V. LM231N/NOPB Features8-DIP (0.300, 7.62mm) package 8 terminations 8 pin count 8 pins The maximal supply current of 6mA 5V power supplies LM231N/NOPB ApplicationsThere are a lot of Texas Instruments LM231N/NOPB V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | VFC320CP OverviewLocated within the 14-DIP (0.300, 7.62mm) package, it can be found here. The electronic part is mounted in the direction of Through Hole. As described in Tube, it is packaged in this way. In this case, an electrical device of type Volt to Frequency and Frequency to Volt is being used. As a matter of fact, there are 14 terminations, which involve terminating a transmission line with a device which matches its characteristic impedance. It is equipped with 14 pin count. Power is provided to the device by a supply voltage of 15V. The base part number can be used to establish parts related to it. On computers and other communication devices, there are pins called 14 pins, which are pronged contacts. Consequently, it operates at a minimum operating temperature of -25°C to ensure its reliability. It operates with the maximal operating temperature of 85°C to ensure its reliability. Through Hole mounted in the way. Analog Special Function Converters contains this part. There is a frequency 1MHz that it operates at. This electrical device operates at a voltage of 15V. Power is supplied by a dual supply voltage of 15V. Input type -10V is the most negative that can be used for this electronic component. A maximal supply current of 7.5mA is used to operate it. Currently, this electrical device has a bandwidth of 1MHz. VFC320CP Features14-DIP (0.300, 7.62mm) package 14 terminations 14 pin count 14 pins A dual supply voltage of 15V The maximal supply current of 7.5mA VFC320CP ApplicationsThere are a lot of Texas Instruments VFC320CP V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM2917N-8/NOPB OverviewIt can be found in the 8-DIP (0.300, 7.62mm) package. Located in Through Hole, this electronic component is mounted. The package is designed in the way of Tube. In this case, an electrical device of type Frequency to Voltage is being used. Termination in 8 refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. 8 pins are equipped with this device. The device is powered by a supply voltage of 12V. It is possible to identify related parts based on the base part number. When a computer or other communication device is attached to a signal interface, there are 8 pins, which are pronged contacts. To ensure its reliability, it must operate at a minimum operating temperature of -40°C. To ensure reliability, the device operates at a maximum operating temperature of 85°C. A Through Hole mounting is used. As part of Analog Special Function Converters, this part is included. The supply voltage (Vsup) should be greater than 6V if it is suitable for use. There is a maximum supply voltage (Vsup) of 28V. The frequency of operation is 10kHz. This electrical device operates at a voltage of 12V. This electronic part has a supply type of Single. During operation, the maximum supply current is 6mA. 8.3V is the output voltage supported by the device. LM2917N-8/NOPB Features8-DIP (0.300, 7.62mm) package 8 terminations 8 pin count 8 pins The maximal supply current of 6mA LM2917N-8/NOPB ApplicationsThere are a lot of Texas Instruments LM2917N-8/NOPB V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM2917M-8/NOPB OverviewThe package 8-SOIC (0.154, 3.90mm Width) includes it. The electronic component is mounted in the direction of Surface Mount. As described in Tube, it is packaged in this way. There is a device of the type Frequency to Voltage being used. The 8 termination of a transmission line is the practice of terminating it with a device whose characteristic impedance matches that of the transmission line. It is equipped with 8 pin count. It is powered from a supply voltage of 12V. The base part number can be used to establish parts related to it. There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. Consequently, it operates at a minimum operating temperature of -40°C to ensure its reliability. It operates with the maximal operating temperature of 85°C to ensure its reliability. Surface Mount mounted in the way. Analog Special Function Converters contains this part. If the supply voltage (Vsup) is greater than 6V, then it should be used. When 28V is reached, the maximum supply voltage (Vsup) is reached. In this case, the maximum frequency is 10kHz. There is a voltage of 12V on the operating supply of this electrical device. The type of supply for this electronic component is Single. A maximal supply current of 6mA is used to operate it. 8.3V is supported as an output voltage. LM2917M-8/NOPB Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 8 pins The maximal supply current of 6mA LM2917M-8/NOPB ApplicationsThere are a lot of Texas Instruments LM2917M-8/NOPB V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | TC9401CPD OverviewAs part of the 14-DIP (0.300, 7.62mm) package, it is embedded. Located in Through Hole, this electronic component is mounted. There is a package in the way of Tube. There is a type Volt to Frequency and Frequency to Volt of electrical device. In 14 terminations, the transmission line is terminated with a device that has a matching characteristic impedance. The device is equipped with a pin count of 14. The device is powered by a supply voltage of 5V. Parts that are related to the base part number can be identified. 14 pins are pronged contacts found in computer or other communication devices, as part of a signal interface. For its reliability, it operates at a minimum operating temperature of 0°C. As a measure to ensure its reliability, it operates at a maximum operating temperature of 70°C. It is mounted in the way of Through Hole. Analog Special Function Converters contains this part. This should be used if the supply voltage (Vsup) exceeds 8V. In this case, 15V is the maximum supply voltage (Vsup). The frequency of operation is 100kHz. The operating supply voltage of this electrical device is 12V. It is powered by a dual supply voltage of 5V. The device supports the output voltage of 18V. TC9401CPD Features14-DIP (0.300, 7.62mm) package 14 terminations 14 pin count 14 pins A dual supply voltage of 5V TC9401CPD ApplicationsThere are a lot of Microchip Technology TC9401CPD V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM2907MX OverviewThe package 14-SOIC (0.154, 3.90mm Width) contains it. Electronic part Surface Mount is mounted in this way. As described in Tape & Reel (TR), it is packaged in this way. A Frequency to Voltage type electrical device is being used. The 14 termination is a technique in which a transmission line is terminated with a device whose characteristic impedance matches that of the transmission line. The device is equipped with a pin count of 14. An electrical supply of voltage 12V supplies power to the device. It is possible to locate related parts based on the base part number. In computers and other types of communication devices, there are 14 pins, which are pronged contacts. For the purpose of ensuring the reliability of the device, it operates at a minimum operating temperature of -40°C. In order to ensure its reliability, it operates at an operating temperature of 85°C. The part is included in Analog Special Function Converters. There should be a higher supply voltage (Vsup) than 12V. When 28V is reached, the maximum supply voltage (Vsup) is reached. A maximum frequency of 10kHz is used for its operation. Based on the maximum supply current 6mA, it operates. LM2907MX Features14-SOIC (0.154, 3.90mm Width) package 14 terminations 14 pin count 14 pins The maximal supply current of 6mA LM2907MX ApplicationsThere are a lot of Texas Instruments LM2907MX V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | TC9401EJD OverviewIt is embedded in the 14-CDIP (0.300, 7.62mm) package. A part of this electronic device is mounted in the manner indicated by Through Hole. As described in Tube, it is packaged in this way. An electrical device of the type Volt to Frequency and Frequency to Volt is being used. As a result of the base part number, the related parts can be identified. There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. A minimum operating temperature of -40°C is required to ensure its reliability during operation. To ensure its reliability, it operates at a maximum operating temperature of 85°C. There is a mounting in the way of Through Hole. It is recommended that the supply voltage (Vsup) exceed 8V. There is a maximal supply voltage (Vsup) reaching 15V. The frequency at which it operates is given by 100kHz. It operates at a maximum frequency of 100kHz. Power is supplied by a dual supply voltage of 5V. TC9401EJD Features14-CDIP (0.300, 7.62mm) package 14 pins A dual supply voltage of 5V TC9401EJD ApplicationsThere are a lot of Microchip Technology TC9401EJD V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM2907M OverviewAs part of the 14-SOIC (0.154, 3.90mm Width) package, it is embedded. The electronic component is mounted in the direction of Surface Mount. Tube is the way it is packaged. Frequency to Voltage is the type of this electrical device. In 14 terminations, the transmission line is terminated with a device that has a matching characteristic impedance. In addition, it is equipped with a pin count of 14. A supply voltage of 12V powers it. There are several parts that can be founded that are related to the base part number. In computers and other communications devices, there are 14 pins, which are pronged contacts. A minimum operating temperature of -40°C is required to ensure its reliability during operation. In order to ensure its reliability, it operates at an operating temperature of 85°C. This part is included in Analog Special Function Converters. Supply voltage (Vsup) should be greater than 12V. There is a maximal supply voltage (Vsup) reaching 28V. A frequency of 10kHz is used for its operation. Using 6mA as the maximum supply current, it operates. LM2907M Features14-SOIC (0.154, 3.90mm Width) package 14 terminations 14 pin count 14 pins The maximal supply current of 6mA LM2907M ApplicationsThere are a lot of Texas Instruments LM2907M V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM331N OverviewLocated within the 8-DIP (0.300, 7.62mm) package, it can be found here. Located in Through Hole, this electronic component is mounted. As described in Tube, it is packaged in this way. Voltage to Frequency is the type of this electrical device. The 8 termination is a technique in which a transmission line is terminated with a device whose characteristic impedance matches that of the transmission line. There is a 8 pin count on this device. An electrical supply of voltage 5V supplies power to the device. According to the base part number, its related parts can be founded. When a computer or other device is connected to the Internet, there are 8 pins, which are pronged contacts. A minimum operating temperature of 0°C is required to ensure its reliability during operation. As a result, it operates at a maximum operating temperature of 70°C to ensure its reliability. Mounted in the way of Through Hole. This part is included in Analog Special Function Converters. Supply voltage (Vsup) should be greater than 4V. Currently, the maximum supply voltage (Vsup) reaches 40V. The frequency 10kHz indicates how often it operates. This electrical device is powered by 28V voltage. -0.2V is the most negative input type that can be applied to this electronic part. 1.7V is the reference voltage for this electrical device. A power supply 5V is used to operate it. Support is provided for the output voltage of 40V. An electrical device of this type has a bandwidth of 100 kHz. LM331N Features8-DIP (0.300, 7.62mm) package 8 terminations 8 pin count 8 pins 5V power supplies LM331N ApplicationsThere are a lot of Texas Instruments LM331N V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM2917M OverviewThe package 14-SOIC (0.154, 3.90mm Width) contains it. A component of this electronic system has been mounted in the direction of Surface Mount. Currently, there is a package in the way of Tube. Frequency to Voltage is the type of this electrical device. The 14 termination of a transmission line is the practice of terminating it with a device whose characteristic impedance matches that of the transmission line. The device is equipped with a pin count of 14. Power is provided to the device by a supply voltage of 12V. Associated parts can be founded based on the base part number. 14 pins are pronged contacts located on the signal interface of a computer or other communication device. To ensure its reliability, it must operate at a minimum operating temperature of -40°C. To ensure reliability, the device operates at a maximum operating temperature of 85°C. It is mounted in the direction of Surface Mount. In Analog Special Function Converters, this part is included. The supply voltage (Vsup) should be greater than 12V. It is ensured that the supply voltage (Vsup) reaches the maximum value 28V. It operates at a frequency of 5kHz. A maximum frequency of 10kHz is used for its operation. LM2917M Features14-SOIC (0.154, 3.90mm Width) package 14 terminations 14 pin count 14 pins LM2917M ApplicationsThere are a lot of Texas Instruments LM2917M V/F & F/V Converters applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
