My CartShock Sensors(630)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Texas Instruments | SN74AHC123AN OverviewMultivibrator is packaged in 16-DIP (0.300, 7.62mm) case.Multivibrator is recommended that you pack the equipment in case of Tube.Multivibrator recommended mounting type is Through Hole.There is a logic type Monostable associated with the part.There is a vote within 2V~5.5V.The 74AHC series include this electrical component.In order for this part to operate properly, the minimum operating temperature should not be -40°C~85°C.Voltage output of 8mA 8mA exceeds current output.Multivibrator is designed on the basis of the 74AHC123 family of components.Multivibrator has 16 terminations in total.3.3V voltage can be handled by this device.It has 2 inputs for data or clock.16 pins are located on the part in total.This is a part of the AHC/VHC/H/U/V family of computers.In the part, there are 16 pins.In this case, the device is mounted by Through Hole.Integrated circuit is essential that the minimum supply voltage be greater than 2V in order to ensure that the supply voltage exceeds 2V.There is a quiescent current consumption at 4μA.5V volts is the operating supply voltage for the chip.Input current to the device is 8mA.IC chips have 2 bits total.Integrated circuit consists of 2 elements.Using 0.04mA is recommended for power supply current. SN74AHC123AN Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74AHC based on 74AHC123 Supply Voltage: 3.3V Quiescent Current at 4μA output current at 8mA 2 bits SN74AHC123AN ApplicationsThere are a lot of Texas Instruments SN74AHC123AN applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC4538M OverviewThe product comes in a 16-SOIC (0.154, 3.90mm Width) case.When packing equipment for Tube, it is advisable to take it along with you.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.There is a logic type Monostable associated with the part.Multivibrator is provided in a quantMultivibratory of 2V~6V.Electrical components of this type are included in the 74HC series.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.Multivibrator is observed that the current output of 5.2mA 5.2mA is low, while the voltage output of 5.2mA 5.2mA is high.In this component, the 74HC4538 family is used as the basis for design.There are a total of 16 terminations.Multivibrator is capable of handling voltages up to 4.5V.This device has a clock input and a data input.As a whole, there are ten 16 pins on this part.HC/UH family is the family that it belongs to.In this part, you can find 16 pins.Surface Mount is used to mount the device.Integrated circuit consumes quiescent current at 8μA.5V volts is the chip's operating supply voltage.A device can be supplied with a current of output named 5.2mA if the output voltage is set appropriately.2 is the total amount of bits on an IC chip.Using the 0.08mA setting would be best for power supply current.There are 2 circuits available on the device. CD74HC4538M Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC4538M ApplicationsThere are a lot of Texas Instruments CD74HC4538M applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AHC123APWRG4 Overview16-TSSOP (0.173, 4.40mm Width) cases package it.As a precaution, it is advisable to pack the equipment in case something goes wrong.Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.This part has Monostable as its logic type.Multivibrator is supplied votage wMultivibratorhin 2V~5.5V.Multivibrator is included in the 74AHC series of electrical components.In order for this part to operate properly, the minimum operating temperature should not be -40°C~85°C.There is a small current output of 8mA 8mA while there is a large voltage output from 8mA 8mA.A component based on the 74AHC123 family is designed.The total number of terminations of this device is 16.Multivibrator is capable of handling voltages up to 3.3V.There is a 2 input for data or a clock input on this board.Multivibrator consists of a total of five 16 pins on the part.The family AHC/VHC/H/U/V is represented by it.In the part, there are 16 pins that are available for use.Surface Mount mounts the device on top of the base.Minimum supply voltage must be greater than 2V for the supply voltage to be greater than 2V.A quiescent current is consumed at 4μA by it.Its operating supply voltage is 5V volts.Input current to the device is 8mA.There are a total of 2 bits on an IC chip, which is the total number of bits.Integrated circuit consists of 2 elements.There is a recommendation to run the power supply current under 0.04mA.This part is packaged by a company called TR. SN74AHC123APWRG4 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHC based on 74AHC123 Supply Voltage: 3.3V Quiescent Current at 4μA output current at 8mA 2 bits SN74AHC123APWRG4 ApplicationsThere are a lot of Texas Instruments SN74AHC123APWRG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HCT4538E OverviewA 16-DIP (0.300, 7.62mm) case holds the product.Multivibrator is advised to pack the equipment in case of Tube.The recommended mounting type is Through Hole.Part Monostable includes logic type Monostable.The vote is delivered within the zone 4.5V~5.5V.There is an electrical component in the 74HCT series.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.A low current is output from the device 4mA 4mA, whereas a high voltage output is output from the device 4mA 4mA.The component is designed based on the 74HCT4538 family.Overall, it has 16 terminations.The device is capable of handling voltages up to 5V.This device has a clock input and a data input.Multivibrator consists of a total of five 16 pins on the part.This is a part of the HCT family of computers.In the part, there are 16 pins that are available for use.Through Hole is used to mount the device.A quiescent current is consumed at 8μA by it.Specifically, 5V volts are the operating supply voltage.Input current to the device is 4mA.Depending on the voltage, it can provide voltage in the range of 5V volts.IC chips have 2 bits total.Integrated circuit is recommended that the power supply current run under 0.08mA.On the device, there are 2 circuits. CD74HCT4538E Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT4538 Supply Voltage: 5V Quiescent Current at 8μA output current at 4mA 2 bits CD74HCT4538E ApplicationsThere are a lot of Texas Instruments CD74HCT4538E applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD14538BM OverviewA 16-SOIC (0.154, 3.90mm Width) case holds the product.As a precaution, it is advisable to pack the equipment in case something goes wrong.The recommended mounting type for this product is Surface Mount.The part's logic type includes Monostable.Votage is provided within a specified period of time within 3V~18V.The 4000B series include this electrical component.There must not be a minimum operating temperature of -55°C~125°C for this part.Compared to the voltage output, the current output of 6.8mA 6.8mA is low.The component is designed based on the CD14538 family.As a result, it has a total of 16 terminations.5V voltage can be handled by it.This device has a clock input and a data input.There are a total of six 16 pins on the part.Multivibrator is a member of the 4000/14000/40000 family.In this part, you can find 16 pins.The device is mounted by Surface Mount.The minimum supply voltage must be greater than 3V in order to ensure that the supply voltage exceeds 3V.During quiescent time, it consumes current at 100μA.Specifically, 12V volts are the operating supply voltage.For the chip to operate properly, a voltage supply of 18V volts needs to be provided to it.Integrated circuit is possible for the device to output a current of 6.8mA as an output current.Integrated circuit can provide voltage up to 5/15V volts.IC chips have 2 bits total.Using the search bar, you can find the additional features of the part: RETRIGGERABLE.Under 0.3mA, it is recommended to run the current from the power supply. CD14538BM Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 4000B based on CD14538 Supply Voltage: 5V Quiescent Current at 100μA output current at 6.8mA 2 bits CD14538BM ApplicationsThere are a lot of Texas Instruments CD14538BM applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AHC123ADBR OverviewPackaged in a 16-SSOP (0.209, 5.30mm Width) case, it comes with a guarantee.Multivibrator is recommended that you pack the equipment in case of Cut Tape (CT).Mounting type Surface Mount is the recommended one for this device.The logic type of the part includes the letter Monostable in its name.Multivibrator is provided in a quantMultivibratory of 2V~5.5V.Electrical components of this type are included in the 74AHC series.During the operation of this part, the minimum operating temperature must not exceed -40°C~85°C degrees Celsius.The output of 8mA 8mA is low in terms of current while it is high in terms of voltage.The component is designed based on the 74AHC123 family.As a whole, it has 16 terminations.There is no problem handling voltages up to 3.3V.Data or clock inputs can be accessed via 2 inputs.Multivibrator consists of a total of five 16 pins on the part.It belongs to AHC/VHC/H/U/V family.In this part, you can find 16 pins.Multivibrator is mounted by Surface Mount.Supply voltages must be higher than 2V to meet the minimum requirement.As 4μA increases, it consumes more quiescent current.The operating supply voltage for the chip is specified as 5V volts.A device such as this can deliver an output current of 8mA to the input current.2 is the total amount of bits on an IC chip.Using the 0.04mA setting would be best for power supply current.Packaged by TR is the part.This device includes 2 circuits. SN74AHC123ADBR Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHC based on 74AHC123 Supply Voltage: 3.3V Quiescent Current at 4μA output current at 8mA 2 bits SN74AHC123ADBR ApplicationsThere are a lot of Texas Instruments SN74AHC123ADBR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC4538PWR OverviewIn this case, the product is packaged in a 16-TSSOP (0.173, 4.40mm Width) case.The equipment should be packed in case of Tape & Reel (TR), so that it can be used in an emergency.Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.As part of the logic type, Monostable is included.We supply it within 2V~6V.Multivibrator is one of the electrical components that is included in the 74HC series.The minimum operating temperature of this part must not be -55°C~125°C.Multivibrator is observed that the current output of 5.2mA 5.2mA is low, while the voltage output of 5.2mA 5.2mA is high.This component has been designed based on the 74HC4538 family of components.Multivibrator has 16 terminations in total.There is no problem handling voltages up to 4.5V.The device has a 2 input for clocks or data.16 pins are present on the part in total.It belongs to HC/UH family.16 pins are available on the part.In this case, the device is mounted by Surface Mount.Minimum supply voltage must be greater than 2V in order for the supply voltage to exceed 2V.As 8μA increases, it consumes more quiescent current.Specifically, 5V volts are the operating supply voltage.If you would like your chip to run properly, it requires a voltage supply of 6V volts to operate.There is a limit to the amount of output current that can be supplied to the device by 5.2A.The total amount of bits on an IC chip is 2.2 elements are included in it.0.08mA is the recommended power supply current.This part is packaged by a company called TR. CD74HC4538PWR Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2A 2 bits CD74HC4538PWR ApplicationsThere are a lot of Texas Instruments CD74HC4538PWR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HCT221E Overview16-DIP (0.300, 7.62mm) cases contain the product.As a precaution, it is advisable to pack the equipment in case something goes wrong.Multivibrator recommended mounting type is Through Hole.There is a Monostable included in the logic type of the part.Multivibrator is provided in a quantMultivibratory of 4.5V~5.5V.Electrical components of this type are included in the 74HCT series.Multivibrator is not permMultivibratorted to operate this part below -55°C~125°C°F.There is a small current output of 4mA 4mA while there is a large voltage output from 4mA 4mA.This component has been designed based on the 74HCT221 family of components.Multivibrator has 16 terminations in total.Multivibrator is capable of handling voltages up to 5V.There are 2 inputs for data and clock.There are a total of 16 16 pins on the part.The product belongs to the family of HCT products.In the part, there are 16 pins.There is a Through Hole which mounts the device.As a result, quiescent current is consumed at 8μA.5V voltage is specified for the chip's operating supply.An output current of 4mA can be supplied to a device to provide an output current to the device.There is a possibility that it can provide voltage at a voltage level of 5V volts.IC chips have a total number of bits of 2, which is the total number of bits on the chip.Under 0.08mA, the power supply current should be run. CD74HCT221E Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT221 Supply Voltage: 5V Quiescent Current at 8μA output current at 4mA 2 bits CD74HCT221E ApplicationsThere are a lot of Texas Instruments CD74HCT221E applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AHCT123APWR OverviewThe product comes in a 16-TSSOP (0.173, 4.40mm Width) case.As a precaution, it is advisable to pack the equipment in case something goes wrong.You should mount it with a Surface Mount type.There are two logic types for this part, Logic Type A and Logic Type B.There is a vote within 4.5V~5.5V.This electrical component is included in the 74AHCT series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -40°C~85°C.Compared to the voltage output, the current output of 8mA 8mA is low.As far as the design is concerned, the component is based on the 74AHCT123 family of components.As a whole, it has 16 terminations.The device is capable of handling voltages up to 5V.It has 2 inputs for data or clock.There are a total of six 16 pins on the part.Multivibrator is a member of the AHCT/VHCT/VT family.The part includes 16 pins.There is a Surface Mount which mounts the device.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.In the state of quiescence, it consumes a lot of current at 4μA.The operating supply voltage for the chip is specified as 5V volts.There is a limit to the amount of output current that can be supplied to the device by 8mA.Depending on the voltage, it can provide voltage in the range of 5V volts.2 is the total amount of bits on an IC chip.Using the search bar, you can find the additional features of the part: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS.Under 0.975mA, the power supply current should be run.Integrated circuit is packaged by TR.This device includes 2 circuits. SN74AHCT123APWR Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHCT based on 74AHCT123 Supply Voltage: 5V Quiescent Current at 4μA output current at 8mA 2 bits SN74AHCT123APWR ApplicationsThere are a lot of Texas Instruments SN74AHCT123APWR applications of multivibrators.
|
8627
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AHCT123ADBR OverviewThe product is packaged in a 16-SSOP (0.209, 5.30mm Width) case.The equipment should be packed in case of Cut Tape (CT), so that it can be used in an emergency.Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.Part Monostable includes logic type Monostable.Votage is supplied within a period of time called 4.5V~5.5V.Multivibrator is one of the electrical components that is included in the 74AHCT series.Multivibrator is not permMultivibratorted to operate this part below -40°C~85°C°F.The output of 8mA 8mA is low in terms of current while it is high in terms of voltage.Multivibrator is designed on the basis of the 74AHCT123 family of components.There are a total of 16 terminations.5V voltage can be handled by it.Data and clock inputs are provided through 2 inputs.There are a total of ten 16 pins on the part.The product belongs to the family of AHCT/VHCT/VT products.In this part, you can find 16 pins.Multivibrator is mounted by Surface Mount.Supply voltages must be higher than 2V to meet the minimum requirement.As 4μA increases, it consumes more quiescent current.Specifically, 5V volts are the operating supply voltage.A device can be supplied with a current of output named 8mA if the output voltage is set appropriately.The voltage that it can output can be as high as 5V volts.IC chips have 2 bits total.The power supply current is suggested to run under 0.975mA.Packaging is handled by TR.On the device, there is a 2 circuit that can be used. SN74AHCT123ADBR Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHCT based on 74AHCT123 Supply Voltage: 5V Quiescent Current at 4μA output current at 8mA 2 bits SN74AHCT123ADBR ApplicationsThere are a lot of Texas Instruments SN74AHCT123ADBR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV123APWRG4 OverviewThere is a 16-TSSOP (0.173, 4.40mm Width) case packaging.Pack the equipment in case of Tape & Reel (TR).Mounting type Surface Mount is the recommended one for this device.The logic type of the part includes Monostable.Multivibrator is provided in a quantMultivibratory of 2V~5.5V.Multivibrator is included in the 74LV series of electrical components.The minimum operating temperature of this part must not be -40°C~125°C.Despite the high voltage output, 12mA 12mA outputs a low current.74LV123 is the basis for the design of the component.As a result, it has a total of 16 terminations.2.5V voltage can be handled by it.Data or clock inputs can be accessed via 2 inputs.Multivibrator consists of a total of five 16 pins on the part.It belongs to LV/LV-A/LVX/H family.Multivibrator is possible to mount 16 pins on this part if you wish.Multivibrator is mounted by Surface Mount.The minimum supply voltage must be greater than 2V in order to ensure that the supply voltage exceeds 2V.At 20μA, it consumes a quiescent current that is consumed by it.Specifically, 5V volts are the operating supply voltage.Input current to the device is 12mA.Using it, you can get voltage at 3.3V volts.An IC chip is made up of 2 bits in total.The element consists of 2 elements.Integrated circuit is packaged by TR. SN74LV123APWRG4 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV123 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV123APWRG4 ApplicationsThere are a lot of Texas Instruments SN74LV123APWRG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV123ADGVR OverviewThe product is packaged in a 16-TFSOP (0.173, 4.40mm Width) case.The equipment should be packed in case of Cut Tape (CT), so that it can be used in an emergency.The recommended mounting type for this product is Surface Mount.This part has Monostable as its logic type.We supply it within 2V~5.5V.The 74LV series include this electrical component.The minimum operating temperature of this part must not be -40°C~125°C.Despite the high voltage output, 12mA 12mA outputs a low current.74LV123 is the basis for the design of the component.The total number of terminations is 16.Multivibrator is capable of handling voltages up to 2.5V.A data or clock input can be connected to it through the 2 input.16 pins are present on the part in total.LV/LV-A/LVX/H family is the family that it belongs to.There are 16 pins available in the part.Surface Mount mounts the device on the wall.Minimum supply voltage should be greater than 2V.Integrated circuit consumes quiescent current at 20μA.5V volts is the chip's operating supply voltage.The output current that can be supplied to the device is 12mA.Integrated circuit can provide voltage up to 3.3V volts.There are 2 bits on an IC chip, and they total up to the total amount of bits.As far as packaging is concerned, TR is responsible.On the device, there are 2 circuits available for use. SN74LV123ADGVR Featuresin 16-TFSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV123 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV123ADGVR ApplicationsThere are a lot of Texas Instruments SN74LV123ADGVR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC221NSR OverviewA 16-SOIC (0.209, 5.30mm Width) case holds the product.The equipment should be packed in case of Tape & Reel (TR), so that it can be used in an emergency.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.Part Monostable includes logic type Monostable.We supply it within 2V~6V.Electrical components of this type are included in the 74HC series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -55°C~125°C.There is a small current output of 5.2mA 5.2mA while there is a large voltage output from 5.2mA 5.2mA.Designed based on the 74HC221 family, the component features a number of features.As a result, it has a total of 16 terminations.4.5V voltage can be handled by it.As well as having 2 inputs for clocks and data, it also has a 2 output.Multivibrator has a total of six 16 pins.This is a part of the HC/UH family of computers.In the part, there are 16 pins.Using Surface Mount, the device is mounted to the surface.Minimum supply voltage must be greater than 2V in order for the supply voltage to exceed 2V.8μA consumes quiescent current.5V volts is the chip's operating supply voltage.To function properly, this chip requires a voltage supply of 6V volts in order to operate.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 5.2mA.IC chips contain 2 bits in total.In this case, it contains 2 elements.The power supply current is suggested to run under 0.08mA.Packaged by TR is the part. CD74HC221NSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC221NSR ApplicationsThere are a lot of Texas Instruments CD74HC221NSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD4098BM OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.Pack the equipment in case of Tube.Mounting type Surface Mount is the recommended one for this device.This part has Monostable as its logic type.Votage is supplied within a period of time called 3V~18V.Multivibrator is one of the electrical components that is included in the 4000B series.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.Compared to the voltage output, the current output of 6.8mA 6.8mA is low.The component is designed based on the CD4098 family.16 terminations are present in total.5V voltage can be handled by it.A data or clock input can be connected to it through the 2 input.Part 16 has a total of four pins.This is a part of the 4000/14000/40000 family of computers.Parts of the part have 16 pins.Surface Mount is used to mount the device.Minimum supply voltage must be greater than 3V in order for the supply voltage to exceed 3V.20μA consumes quiescent current.There is a 12V volt specification for the chip's operating supply voltage.If you would like your chip to run properly, it requires a voltage supply of 18V volts to operate.Input current to the device is 6.8mA.The voltage that it can output can be as high as 5/15V volts.2 is the total number of bits on an IC chip.This part also has the following extra features that you may be interested in: RETRIGGERABLEUnder 0.06mA, it is recommended to run the power supply current.An input current of 20μA is the maximum it can handle. CD4098BM Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 4000B based on CD4098 Supply Voltage: 5V Quiescent Current at 20μA output current at 6.8mA 2 bits CD4098BM ApplicationsThere are a lot of Texas Instruments CD4098BM applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV123ATPWREP OverviewPackaged in a 16-TSSOP (0.173, 4.40mm Width) case, it comes with a guarantee.The equipment should be packed in case of Tape & Reel (TR), so that it can be used in an emergency.Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.There is a Monostable included in the logic type of the part.There is a supply of votage within 2V~5.5V hours.This electrical component is included in the 74LV series.A minimum operating temperature of -40°C~105°C must not be reached by this part.In the case of 12mA 12mA, the current output is low, while the voltage output is high.This component has been designed based on the 74LV123 family of components.There are a total of 16 terminations on it.There is no problem with the device handling the 3.3V voltage.It has 2 inputs for data or clock.16 pins are located on the part in total.Multivibrator is a member of the LV/LV-A/LVX/H family.16 pins are available on the part.Using Surface Mount, the device is mounted to the surface.Integrated circuit is essential that the minimum supply voltage be greater than 2V in order to ensure that the supply voltage exceeds 2V.A quiescent current is consumed at 20μA by it.There is a 5V volt specification for the chip's operating supply voltage.A device such as this can deliver an output current of 12mA to the input current.2 is the total number of bits on an IC chip.Integrated circuit consists of 2 elements.This part is packaged by a company called TR. SN74LV123ATPWREP Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV123 Supply Voltage: 3.3V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV123ATPWREP ApplicationsThere are a lot of Texas Instruments SN74LV123ATPWREP applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV221ANSR OverviewIn this case, the product is packaged in a 16-SOIC (0.209, 5.30mm Width) case.When packing equipment for Cut Tape (CT), it is advisable to take it along with you.The recommended mounting type is Surface Mount.There are two logic types for this part, Logic Type A and Logic Type B.There is a vote within 2V~5.5V.This electrical component is included in the 74LV series.A minimum operating temperature of -40°C~85°C must not be reached by this part.Compared to the voltage output, the current output of 12mA 12mA is low.This component has been designed based on the 74LV221 family of components.As a result, it has a total of 16 terminations.Multivibrator can handle 2.5V voltage.There is a 2 input for data or a clock input on this board.As a whole, there are ten 16 pins on this part.A member of the LV/LV-A/LVX/H family, it has a number of characteristics.16 pins are included in the specification for the part.Using Surface Mount, the device is mounted to the surface.Minimum supply voltage must be greater than 2V in order for the supply voltage to exceed 2V.At 20μA, it consumes a small amount of quiescent current.There is a 5V volt specification for the chip's operating supply voltage.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 12mA.This device is capable of giving voltages up to 3.3V volts.There are a total of 2 bits on an IC chip, which is the total number of bits.This part is packaged by a company called TR.In terms of circuitry, the device is equipped with 2 circuits. SN74LV221ANSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV221 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV221ANSR ApplicationsThere are a lot of Texas Instruments SN74LV221ANSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC4538NSR OverviewThere is a 16-SOIC (0.209, 5.30mm Width) case packaging.In case of Tape & Reel (TR), the equipment should be packed.Surface Mount mounting is recommended.The logic type of the part includes Monostable.Multivibrator is supplied votage wMultivibratorhin 2V~6V.There is an electrical component included in the 74HC series.The minimum operating temperature of this part must not be -55°C~125°C.The output of 5.2mA 5.2mA is low in terms of current while it is high in terms of voltage.Based on the 74HC4538 family, the component is designed.There are a total of 16 terminations.There is no problem handling voltages up to 4.5V.The device has a 2 input for clocks or data.Multivibrator has a total of six 16 pins.This is a part of the HC/UH family of computers.In the part, there are 16 pins.Using Surface Mount, the device is mounted to the surface.The necessary minimum supply voltage ought to be greater than 2V.As 8μA increases, it consumes more quiescent current.5V voltage is specified for the chip's operating supply.In order for this chip to function correctly, it is required a voltage supply of 6V volts.A device can be supplied with a current of output named 5.2mA if the output voltage is set appropriately.An IC chip is made up of 2 bits in total.The element consists of 2 components.There is a recommendation to run the power supply current under 0.08mA.TR is the company that packages the part. CD74HC4538NSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC4538NSR ApplicationsThere are a lot of Texas Instruments CD74HC4538NSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV221ADGVR OverviewThe product is packaged in a 16-TFSOP (0.173, 4.40mm Width) case.Keeping equipment packed in case of Tape & Reel (TR) is a good idea.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.There are two logic types for this part, Logic Type A and Logic Type B.Voting is provided within the stipulated timeframe.This electrical component is included in the 74LV series.Multivibrator is not permMultivibratorted to operate this part below -40°C~85°C°F.Multivibrator is observed that the current output of 12mA 12mA is low, while the voltage output of 12mA 12mA is high.This component has been designed based on the 74LV221 family of components.Overall, it has 16 terminations.2.5V voltage can be handled by it.Data or clock inputs are available on 2 inputs.The part has a total of 16 pins.It belongs to LV/LV-A/LVX/H family.Parts of the part have 16 pins.Surface Mount is used to mount the device.Minimum supply voltage should be greater than 2V.There is a quiescent current consumption at 20μA.The operating supply voltage for the chip is specified as 5V volts.The output current that can be supplied to the device is 12mA.Integrated circuit can give voltage at 3.3V volts.2 is the total amount of bits on an IC chip.The element has 2 elements.Packaged by TR is the part. SN74LV221ADGVR Featuresin 16-TFSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV221 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV221ADGVR ApplicationsThere are a lot of Texas Instruments SN74LV221ADGVR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD4047BM OverviewThe product is packaged in a 14-SOIC (0.154, 3.90mm Width) case.Pack the equipment in case of Tube.The recommended mounting type for this product is Surface Mount.There are two logic types for this part, Logic Type A and Logic Type B.There is a vote within 3V~18V.Multivibrator is included in the 4000B series of electrical components.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -55°C~125°C.Compared to the voltage output, the current output of 6.8mA 6.8mA is low.CD4047 is the basis for the design of the component.There are a total of 14 terminations.There is no problem handling voltages up to 5V.A data or clock input can be connected to it through the 2 input.There are a total of six 14 pins on the part.In this part, you can find 14 pins.In this case, the device is mounted by Surface Mount.Minimum supply voltage must be greater than 3V in order for the supply voltage to exceed 3V.Integrated circuit consumes quiescent current at 20μA.There is a 12V volt specification for the chip's operating supply voltage.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 6.8mA.IC chips contain 1 bits in total.This part also has the following extra features that you may be interested in: RETRIGGERABLEIntegrated circuit is recommended that the power supply current run under 0.06mA.A maximum supply current of 20μA can be handled by this device. CD4047BM Featuresin 14-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Astable, Monostable Operating Temperature: 4000B based on CD4047 Supply Voltage: 5V Quiescent Current at 20μA output current at 6.8mA 1 bits CD4047BM ApplicationsThere are a lot of Texas Instruments CD4047BM applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC123PW Overview16-TSSOP (0.173, 4.40mm Width) cases package it.Multivibrator is recommended that you pack the equipment in case of Tube.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.There are two logic types for this part, Logic Type A and Logic Type B.During the period of 2V~6V, it is supplied with the required amount of votes.This electrical component is included in the 74HC series.There is a minimum operating temperature that cannot be exceeded by this part.Multivibrator causes 5.2mA 5.2mA low,high output current.74HC123 is the basis for the design of the component.Total 16 terminations are present.Multivibrator is possible for the device to handle the 4.5V voltage.This device has a clock input and a data input.As a whole, there are ten 16 pins on this part.A member of the HC/UH family, it has a number of characteristics.Multivibrator is possible to mount 16 pins on this part if you wish.In this case, the device is mounted by Surface Mount.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.As a result, quiescent current is consumed at 8μA.5V volts of voltage is required to run this chip.For the chip to operate properly, a voltage supply of 6V volts needs to be provided to it.There is a limit on the amount of output current that can be provided to the device, which is called 5.2mA.IC chips have a total number of bits of 2, which is the total number of bits on the chip.Additional features of the part can be found by searching: RETRIGGERABLEThe power supply current is suggested to run under 0.08mA. CD74HC123PW Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC123 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC123PW ApplicationsThere are a lot of Texas Instruments CD74HC123PW applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LS122N OverviewA 14-DIP (0.300, 7.62mm) case holds the product.When packing equipment for Tube, it is advisable to take it along with you.Multivibrator is recommended that you use a Through Hole mounting type for Multivibrator.The part's logic type includes Monostable.Multivibrator is supplied votage wMultivibratorhin 4.75V~5.25V.Multivibrator is included in the 74LS series of electrical components.The minimum operating temperature of this part must not be 0°C~70°C.Multivibrator is observed that the current output of 400μA 8mA is low, while the voltage output of 400μA 8mA is high.This component has been designed based on the 74LS122 family of components.The total number of terminations is 14.Multivibrator is possible for the device to handle the 5V voltage.A data or clock input can be connected to it through the 4 input.As a whole, there are ten 14 pins on this part.The LS family is responsible for it.In this part, you can find 14 pins.The device is mounted by Through Hole.In the state of quiescence, it consumes a lot of current at 6mA.Specifically, 5V volts are the operating supply voltage.Input current to the device is 8mA.Using it, you can get voltage at 5V volts.2 is the total number of bits on an IC chip.The part's additional features can be searched here: RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOThe element consists of 1 components. SN74LS122N Featuresin 14-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74LS based on 74LS122 Supply Voltage: 5V Quiescent Current at 6mA output current at 8mA 2 bits SN74LS122N ApplicationsThere are a lot of Texas Instruments SN74LS122N applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC423M OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case in which it is packaged.Keeping equipment packed in case of Tube is a good idea.The recommended mounting type is Surface Mount.Part Monostable includes logic type Monostable.Votage is provided within a specified period of time within 2V~6V.A 74HC series component includes this electrical component.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.The output of 5.2mA 5.2mA is low in terms of current while it is high in terms of voltage.A 74HC423-family component is used to design the component.As a whole, it has 16 terminations.Multivibrator is possible for the device to handle the 4.5V voltage.There are 2 inputs for data and clock.There are a total of 16 16 pins on the part.A member of the HC/UH family, it has a number of characteristics.There are 16 pins available in the part.Surface Mount is used to mount the device.The necessary minimum supply voltage ought to be greater than 2V.Integrated circuit consumes quiescent current at 8μA.5V volts is the operating supply voltage for the chip.For the chip to operate properly, a voltage supply of 6V volts needs to be provided to it.A device such as this can deliver an output current of 5.2mA to the input current.There are 2 bits on an IC chip, and they total up to the total amount of bits.Here is a search engine you can use to search for additional features of the part: RETRIGGERABLEUnder 0.08mA, it is recommended to run the current from the power supply. CD74HC423M Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC423 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC423M ApplicationsThere are a lot of Texas Instruments CD74HC423M applications of multivibrators.
|
3120
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HCT221M OverviewThe product comes in a 16-SOIC (0.154, 3.90mm Width) case.When packing equipment for Tube, it is advisable to take it along with you.Mounting type Surface Mount is the recommended one for this device.This part has Monostable as its logic type.Voting is provided within the stipulated timeframe.There is an electrical component included in the 74HCT series.There is a minimum operating temperature that cannot be exceeded by this part.4mA 4mA's current output is low and its voltage output is high.In this component, the 74HCT221 family is used as the basis for design.As a whole, it has 16 terminations.5V voltage can be handled by it.Data or clock inputs can be accessed via 2 inputs.The part has a total of 16 pins.There is a HCT family member.16 pins are available on the part.Multivibrator is mounted by Surface Mount.Integrated circuit consumes quiescent current at 8μA.5V volts is the chip's operating supply voltage.Input current to the device is 4mA.There is a possibility of giving voltage at 5V volts using this device.IC chips have 2 bits total.Under 0.08mA, the power supply current should be run. CD74HCT221M Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT221 Supply Voltage: 5V Quiescent Current at 8μA output current at 4mA 2 bits CD74HCT221M ApplicationsThere are a lot of Texas Instruments CD74HCT221M applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LS122D OverviewIn this case, the product is packaged in a 14-SOIC (0.154, 3.90mm Width) case.If Tube happens, pack the equipment accordingly.Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.There are two logic types for this part, Logic Type A and Logic Type B.There is a supply of votage within 4.75V~5.25V hours.The 74LS series include this electrical component.Multivibrator is recommended that this part does not operate at a minimum temperature of 0°C~70°C.Despite the high voltage output, 400μA 8mA outputs a low current.Based on the 74LS122 family, the component is designed.Overall, it has 14 terminations.Multivibrator is capable of handling voltages up to 5V.This device has a clock input and a data input.The part has a total of 14 pins.This is a part of the LS family of computers.14 pins are included in the specification for the part.Using Surface Mount, the device is mounted to the surface.A quiescent current is consumed at 6mA by it.5V volts of voltage is required to run this chip.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 8mA.This device is capable of giving voltages up to 5V volts.2 is the total number of bits on an IC chip.RETRIGGERABLE is the part's additional features search field. SN74LS122D Featuresin 14-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS122 Supply Voltage: 5V Quiescent Current at 6mA output current at 8mA 2 bits SN74LS122D ApplicationsThere are a lot of Texas Instruments SN74LS122D applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC4538PWT OverviewThere is a 16-TSSOP (0.173, 4.40mm Width) case in which it is packaged.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).You should mount it with a Surface Mount type.This part has Monostable as its logic type.Multivibrator is supplied votage wMultivibratorhin 2V~6V.74HC series electric components include this component.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.Compared to the voltage output, the current output of 5.2mA 5.2mA is low.The component is designed based on the 74HC4538 family.Multivibrator has 16 terminations in total.Multivibrator is capable of handling voltages up to 4.5V.This device has a clock input and a data input.16 pins are present on the part in total.A member of the HC/UH family, it has a number of characteristics.The part includes 16 pins.As shown in the picture, Surface Mount is mounting the device.Minimum supply voltage must be greater than 2V for the supply voltage to be greater than 2V.A quiescent current is consumed at 8μA by it.5V volts is the operating supply voltage for the chip.If you would like your chip to run properly, it requires a voltage supply of 6V volts to operate.There is a limit to how much current the device can supply in terms of output current.An IC chip is made up of 2 bits in total.The element consists of 2 components.Under 0.08mA, it is recommended to run the current from the power supply.TR is the company responsible for packaging the part. CD74HC4538PWT Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC4538PWT ApplicationsThere are a lot of Texas Instruments CD74HC4538PWT applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC221MT OverviewMultivibrator is packaged in 16-SOIC (0.154, 3.90mm Width) case.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).You should mount it with a Surface Mount type.The logic type of the part includes the letter Monostable in its name.There is a vote within 2V~6V.Electrical components of this type are included in the 74HC series.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.Despite the high voltage output, 5.2mA 5.2mA outputs a low current.A component based on the 74HC221 family is designed.As a whole, it has 16 terminations.You can use it with 4.5V voltage.Data or clock inputs can be accessed via 2 inputs.The part has a total of 16 pins.It belongs to HC/UH family.In the part, there are 16 pins that are available for use.By mounting the device, Surface Mount provides a secure connection.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.As a result, quiescent current is consumed at 8μA.The operating supply voltage for the chip is specified as 5V volts.As a result, this chip needs a voltage supply of 6V volts for it to work properly.A device such as this can deliver an output current of 5.2mA to the input current.2 is the total amount of bits on an IC chip.2 elements are included in it.Integrated circuit is recommended that the power supply current run under 0.08mA.Integrated circuit is packaged by TR. CD74HC221MT Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC221MT ApplicationsThere are a lot of Texas Instruments CD74HC221MT applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LS123NSR OverviewA 16-SOIC (0.209, 5.30mm Width) case holds the product.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).Surface Mount is recommended for mounting.There is a logic type Monostable associated with the part.Voting is provided within the stipulated timeframe.A 74LS series component includes this electrical component.Multivibrator is not permMultivibratorted to operate this part below 0°C~70°C°F.Compared to the voltage output, the current output of 400μA 8mA is low.Designed based on the 74LS123 family, the component features a number of features.As a result, it has a total of 16 terminations.Multivibrator is possible for the device to handle the 5V voltage.There are 2 inputs for data and clock.There are a total of 16 16 pins on the part.There is a LS family member.16 pins are included in the specification for the part.Multivibrator is mounted by Surface Mount.At 12mA, it consumes a quiescent current that is consumed by it.5V volts is the operating supply voltage for the chip.Integrated circuit is possible for the device to output a current of 8mA as an output current.The voltage that it can output can be as high as 5V volts.IC chips contain 2 bits in total.Integrated circuit contains 2 elements.TR is the company responsible for packaging the part. SN74LS123NSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS123 Supply Voltage: 5V Quiescent Current at 12mA output current at 8mA 2 bits SN74LS123NSR ApplicationsThere are a lot of Texas Instruments SN74LS123NSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV123ADBR OverviewThe product comes in a 16-SSOP (0.209, 5.30mm Width) case.When packing equipment for Tape & Reel (TR), it is advisable to take it along with you.Multivibrator recommended mounting type is Surface Mount.There is a logic type Monostable associated with the part.We supply it within 2V~5.5V.Electrical components of this type are included in the 74LV series.There must not be a minimum operating temperature of -40°C~125°C for this part.Multivibrator is observed that the current output of 12mA 12mA is low, while the voltage output of 12mA 12mA is high.In this component, the 74LV123 family is used as the basis for design.Overall, it has 16 terminations.You can use it with 2.5V voltage.Data and clock inputs are provided through 2 inputs.Multivibrator consists of a total of five 16 pins on the part.The LV/LV-A/LVX/H family is what it belongs to.The part includes 16 pins.Surface Mount is used to mount the device.Minimum supply voltage must be greater than 2V for the supply voltage to be greater than 2V.Integrated circuit consumes quiescent current at 20μA.5V volts is the operating supply voltage for the chip.An output current of 12mA can be supplied to a device to provide an output current to the device.The voltage that it can output can be as high as 3.3V volts.2 is the total amount of bits on an IC chip.2 elements are included in it.The part is packaged by TR. SN74LV123ADBR Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV123 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV123ADBR ApplicationsThere are a lot of Texas Instruments SN74LV123ADBR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC123M96 OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.In case of Cut Tape (CT), the equipment should be packed.The recommended mounting type is Surface Mount.There are two logic types for this part, Logic Type A and Logic Type B.Multivibrator is provided in a quantMultivibratory of 2V~6V.These electrical components can be found in the 74HC series.Multivibrator is not permMultivibratorted to operate this part below -55°C~125°C°F.A low current is output from the device 5.2mA 5.2mA, whereas a high voltage output is output from the device 5.2mA 5.2mA.74HC123 is the basis for the design of the component.16 terminations are present in total.The device is capable of handling voltages up to 4.5V.Data or clock inputs can be accessed via 2 inputs.16 pins are present on the part in total.Multivibrator is a member of the HC/UH family.In the part, there are 16 pins.There is a Surface Mount which mounts the device.Minimum supply voltage must be greater than 2V for the supply voltage to be greater than 2V.In the state of quiescence, it consumes a lot of current at 8μA.5V volts of voltage is required to run this chip.Integrated circuit is required for this chip to be supplied wIntegrated Circuith a voltage supply of 6V volts in order to operate properly.A device such as this can deliver an output current of 20mA to the input current.IC chips have a total number of bits of 2, which is the total number of bits on the chip.Listed below are the additional features for the part: RETRIGGERABLEUnder 0.08mA, it is recommended to run the power supply current.This part is packaged by a company called TR.Devices have 2 circuits. CD74HC123M96 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC123 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 20mA 2 bits CD74HC123M96 ApplicationsThere are a lot of Texas Instruments CD74HC123M96 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV123ANSR OverviewPackaged in a 16-SOIC (0.209, 5.30mm Width) case, it comes with a guarantee.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).The recommended mounting type is Surface Mount.Part Monostable includes logic type Monostable.Votage is provided within a specified period of time within 2V~5.5V.There is an electrical component in the 74LV series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -40°C~125°C.In the case of 12mA 12mA, the current output is low, while the voltage output is high.Multivibrator is designed on the basis of the 74LV123 family of components.Total 16 terminations are present.The device is capable of handling voltages up to 2.5V.There are 2 inputs for data and clock.The part has a total of 16 pins.LV/LV-A/LVX/H family is the family that it belongs to.In this part, you can find 16 pins.Using Surface Mount, the device is mounted to the surface.Minimum supply voltage must be greater than 2V in order for the supply voltage to exceed 2V.At 20μA, it consumes a small amount of quiescent current.5V volts is the chip's operating supply voltage.A device can be supplied with a current of output named 12mA if the output voltage is set appropriately.Integrated circuit can give voltage at 3.3V volts.IC chips have 2 bits total.There are 2 elements in it.This part is packaged by a company called TR. SN74LV123ANSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV123 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV123ANSR ApplicationsThere are a lot of Texas Instruments SN74LV123ANSR applications of multivibrators.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
