My CartShock Sensors(630)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Ultralife | CD74HC123PWRG4 OverviewThere is a 16-TSSOP (0.173, 4.40mm Width) case in which it is packaged.If Tape & Reel (TR) happens, pack the equipment accordingly.Surface Mount mounting is recommended.The logic type of the part includes Monostable.Votage is provided within a specified period of time within 2V~6V.A 74HC series component includes this electrical component.Multivibrator is not permMultivibratorted to operate this part below -55°C~125°C°F.Voltage output of 5.2mA 5.2mA exceeds current output.Designed based on the 74HC123 family, the component features a number of features.The total number of terminations is 16.4.5V voltage can be handled by this device.Data or clock inputs are available on 2 inputs.As a whole, there are ten 16 pins on this part.Multivibrator is a member of the HC/UH family.16 pins are available on the part.By mounting the device, Surface Mount provides a secure connection.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.As a result, quiescent current is consumed at 8μA.Its operating supply voltage is 5V volts.This part's maximum supply voltage (Vsup) should not exceed 6V volts.There is a limit on the amount of output current that can be provided to the device, which is called 5.2mA.The total amount of bits on an IC chip is 2.This part also has the following extra features that you may be interested in: RETRIGGERABLE2 elements are included in it.Under 0.08mA, it is recommended to run the current from the power supply.This part is packaged by a company called TR. CD74HC123PWRG4 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC123 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC123PWRG4 ApplicationsThere are a lot of Texas Instruments CD74HC123PWRG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV123APWG4 OverviewPackaged in a 16-TSSOP (0.173, 4.40mm Width) case, it comes with a guarantee.Pack the equipment in case of Tube.Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.There are two logic types for this part, Logic Type A and Logic Type B.Voting is provided within the stipulated timeframe.A 74LV series component includes this electrical component.In order for this part to operate properly, the minimum operating temperature should not be -40°C~125°C.The output of 12mA 12mA is low in terms of current while it is high in terms of voltage.A 74LV123-family component is used to design the component.Overall, it has 16 terminations.There is no problem handling voltages up to 2.5V.It has 2 inputs for data or clock.16 pins are present on the part in total.There is a LV/LV-A/LVX/H family member.Specifications include 16 pins for the part.Surface Mount is used to mount the device.Minimum supply voltage must be greater than 2V for the supply voltage to be greater than 2V.At 20μA, it consumes a quiescent current that is consumed by it.5V volts is the operating supply voltage for the chip.The output current that can be supplied to the device is 12mA.This device is capable of giving voltages up to 3.3V volts.An IC chip is made up of 2 bits in total.In this case, it contains 2 elements. SN74LV123APWG4 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV123 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV123APWG4 ApplicationsThere are a lot of Texas Instruments SN74LV123APWG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC123ME4 OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.Multivibrator is recommended that you pack the equipment in case of Tube.The recommended mounting type for this product is Surface Mount.Part Monostable includes logic type Monostable.Votage is provided within a specified period of time within 2V~6V.The 74HC series include this electrical component.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.Multivibrator is observed that the current output of 5.2mA 5.2mA is low, while the voltage output of 5.2mA 5.2mA is high.As far as the design is concerned, the component is based on the 74HC123 family of components.The total number of terminations is 16.You can use it with 4.5V voltage.This device has a clock input and a data input.As a whole, there are ten 16 pins on this part.There is a HC/UH family member.In this part, you can find 16 pins.There is a Surface Mount which mounts the device.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.During quiescent time, it consumes current at 8μA.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.In order for this chip to function correctly, it is required a voltage supply of 6V volts.Integrated circuit is possible for the device to output a current of 5.2mA as an output current.IC chips contain 2 bits in total.Listed below are the additional features for the part: RETRIGGERABLE2 elements are included in it.0.08mA is the recommended power supply current. CD74HC123ME4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC123 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC123ME4 ApplicationsThere are a lot of Texas Instruments CD74HC123ME4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4047BEG4 OverviewThere is a 14-DIP (0.300, 7.62mm) case packaging.Pack the equipment in case of Tube.Multivibrator recommended mounting type is Through Hole.As part of the logic type, Astable, Monostable is included.There is a vote within 3V~18V.Multivibrator is one of the electrical components that is included in the 4000B series.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.In the case of 6.8mA 6.8mA, the current output is low, while the voltage output is high.The component is designed based on the CD4047 family. CD4047BEG4 Featuresin 14-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Astable, Monostable Operating Temperature: 4000B based on CD4047 CD4047BEG4 ApplicationsThere are a lot of Texas Instruments CD4047BEG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4538ME4 Overview16-SOIC (0.154, 3.90mm Width) cases contain the product.Keeping equipment packed in case of Tube is a good idea.Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.There is a logic type Monostable associated with the part.Votage is supplied within a period of time called 2V~6V.There is an electrical component included in the 74HC series.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.Multivibrator is observed that the current output of 5.2mA 5.2mA is low, while the voltage output of 5.2mA 5.2mA is high.Multivibrator is designed on the basis of the 74HC4538 family of components.As a result, it has a total of 16 terminations.Multivibrator is capable of handling voltages up to 4.5V.There is a 2 input for data or a clock input on this board.The part has a total of 16 pins.The HC/UH family is what it belongs to.The part includes 16 pins.There is a Surface Mount which mounts the device.Minimum supply voltage must be greater than 2V for the supply voltage to be greater than 2V.As 8μA increases, it consumes more quiescent current.5V voltage is specified for the chip's operating supply.Chips like this one require 6V volts to run properly.The output current that can be supplied to the device is 5.2mA.In an IC chip, there are 2 bits.There are 2 elements in it.Using 0.08mA is recommended for power supply current. CD74HC4538ME4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC4538ME4 ApplicationsThere are a lot of Texas Instruments CD74HC4538ME4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4047BMG4 OverviewA 14-SOIC (0.154, 3.90mm Width) case holds the product.As a precaution, it is advisable to pack the equipment in case something goes wrong.Surface Mount is recommended for mounting.There is a Astable, Monostable included in the logic type of the part.During the period of 3V~18V, it is supplied with the required amount of votes.This electrical component is included in the 4000B series.Multivibrator is recommended that this part does not operate at a minimum temperature of -55°C~125°C.Multivibrator causes 6.8mA 6.8mA low,high output current.As far as the design is concerned, the component is based on the CD4047 family of components.The total number of terminations of this device is 14.Voltages in the 5V range can be handled.As well as having 2 inputs for clocks and data, it also has a 2 output.Multivibrator has a total of six 14 pins.14 pins are available on the part.By mounting the device, Surface Mount provides a secure connection.Integrated circuit is essential that the minimum supply voltage be greater than 3V in order to ensure that the supply voltage exceeds 3V.During quiescent time, it consumes current at 20μA.12V volts is the operating supply voltage for the chip.There is a limit to how much current the device can supply in terms of output current.The total amount of bits on an IC chip is 1.Integrated circuit is possible to search the addIntegrated circuitional features of the part using the following search terms: RETRIGGERABLEThere are 1 elements in it.Integrated circuit is recommended that the power supply current run under 0.06mA. CD4047BMG4 Featuresin 14-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Astable, Monostable Operating Temperature: 4000B based on CD4047 Supply Voltage: 5V Quiescent Current at 20μA output current at 6.8mA 1 bits CD4047BMG4 ApplicationsThere are a lot of Texas Instruments CD4047BMG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HCT221EG4 OverviewPackaged in a 16-DIP (0.300, 7.62mm) case, it comes with a guarantee.Multivibrator is advised to pack the equipment in case of Tube.The recommended mounting type for this product is Through Hole.The logic type of the part includes Monostable.Votage is supplied within a period of time called 4.5V~5.5V.The 74HCT series include this electrical component.A minimum operating temperature of -55°C~125°C must not be reached by this part.4mA 4mA's current output is low and its voltage output is high.In this component, the 74HCT221 family is used as the basis for design. CD74HCT221EG4 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT221 CD74HCT221EG4 ApplicationsThere are a lot of Texas Instruments CD74HCT221EG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | 74LVC1G123DCTTE4 OverviewPackaged in a 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) case, it comes with a guarantee.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).You should mount it with a Surface Mount type.This part has Monostable as its logic type.Votage is provided within a specified period of time within 1.65V~5.5V.A 74LVC series component includes this electrical component.Multivibrator is recommended that this part does not operate at a minimum temperature of -40°C~125°C.32mA 32mA's current output is low and its voltage output is high.Designed based on the 74LVC1G123 family, the component features a number of features.Specifications include 8 pins for the part.As shown in the picture, Surface Mount is mounting the device.During quiescent time, it consumes current at 20μA.5V voltage is specified for the chip's operating supply.Integrated circuit contains 1 elements. 74LVC1G123DCTTE4 Featuresin 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LVC based on 74LVC1G123 Quiescent Current at 20μA 74LVC1G123DCTTE4 ApplicationsThere are a lot of Texas Instruments 74LVC1G123DCTTE4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS123DG4 OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.In case of Tube, the equipment should be packed.The recommended mounting type for this product is Surface Mount.There is a logic type Monostable associated with the part.Votage is provided within a specified period of time within 4.75V~5.25V.These electrical components can be found in the 74LS series.In order for this part to operate properly, the minimum operating temperature should not be 0°C~70°C.Compared to the voltage output, the current output of 400μA 8mA is low.As far as the design is concerned, the component is based on the 74LS123 family of components.The total number of terminations is 16.Multivibrator is possible for the device to handle the 5V voltage.Data and clock inputs are provided through 2 inputs.As a whole, there are ten 16 pins on this part.It belongs to LS family.The part includes 16 pins.As shown in the picture, Surface Mount is mounting the device.During quiescent time, it consumes current at 12mA.5V volts of voltage is required to run this chip.Integrated circuit is possible for the device to output a current of 8mA as an output current.Using it, you can get voltage at 5V volts.There are a total of 2 bits on an IC chip, which is the total number of bits.Integrated circuit is possible to search the addIntegrated circuitional features of the part using the following search terms: RETRIGGERABLE2 elements are included in it. SN74LS123DG4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS123 Supply Voltage: 5V Quiescent Current at 12mA output current at 8mA 2 bits SN74LS123DG4 ApplicationsThere are a lot of Texas Instruments SN74LS123DG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS122NG4 OverviewMultivibrator is packaged in 14-DIP (0.300, 7.62mm) case.Multivibrator is advised to pack the equipment in case of Tube.Through Hole is recommended for mounting.This part has Monostable as its logic type.During the period of 4.75V~5.25V, it is supplied with the required amount of votes.This electrical component is included in the 74LS series.In order for this part to operate properly, the minimum operating temperature should not be 0°C~70°C.Voltage output of 400μA 8mA exceeds current output.The component is designed based on the 74LS122 family. SN74LS122NG4 Featuresin 14-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74LS based on 74LS122 SN74LS122NG4 ApplicationsThere are a lot of Texas Instruments SN74LS122NG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS423DG4 Overview16-SOIC (0.154, 3.90mm Width) cases package it.Multivibrator is advised to pack the equipment in case of Tube.Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.There are two logic types for this part, Logic Type A and Logic Type B.Voting is provided within the stipulated timeframe.The 74LS series include this electrical component.A minimum operating temperature of 0°C~70°C must not be reached by this part.In the case of 400μA 8mA, the current output is low, while the voltage output is high.The component is designed based on the 74LS423 family.As a result, it has a total of 16 terminations.There is no problem handling voltages up to 5V.There are 2 inputs for data and clock.There are a total of ten 16 pins on the part.This is a part of the LS family of computers.In the part, there are 16 pins.There is a Surface Mount which mounts the device.As a result, quiescent current is consumed at 12mA.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.Input current to the device is 8mA.There is a possibility of giving voltage at 5V volts using this device.2 is the total amount of bits on an IC chip.Integrated circuit contains 2 elements. SN74LS423DG4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS423 Supply Voltage: 5V Quiescent Current at 12mA output current at 8mA 2 bits SN74LS423DG4 ApplicationsThere are a lot of Texas Instruments SN74LS423DG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS221DR OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case in which it is packaged.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.There is a logic type Monostable associated with the part.Voting is provided within the stipulated timeframe.Multivibrator is one of the electrical components that is included in the 74LS series.Multivibrator is recommended that this part does not operate at a minimum temperature of 0°C~70°C.Despite the high voltage output, 400μA 8mA outputs a low current.The component is designed based on the 74LS221 family.Multivibrator has 16 terminations in total.Multivibrator is possible for the device to handle the 5V voltage.The device has a 2 input for clocks or data.16 pins are located on the part in total.The product belongs to the family of LS products.Specifications include 16 pins for the part.Surface Mount mounts the device on the wall.As a result, quiescent current is consumed at 4.7mA.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.An output current of 8mA can be supplied to a device to provide an output current to the device.Depending on the voltage, it can provide voltage in the range of 5V volts.There are 2 bits on an IC chip, and they total up to the total amount of bits.The element has 2 elements.Integrated circuit is packaged by TR. SN74LS221DR Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS221 Supply Voltage: 5V Quiescent Current at 4.7mA output current at 8mA 2 bits SN74LS221DR ApplicationsThere are a lot of Texas Instruments SN74LS221DR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | 74HC221DB,112 Overview16-SSOP (0.209, 5.30mm Width) cases package it.As a precaution, it is advisable to pack the equipment in case something goes wrong.Multivibrator recommended mounting type is Surface Mount.This part has Monostable as its logic type.Votage is provided within a specified period of time within 2V~6V.74HC series electric components include this component.There must not be a minimum operating temperature of -40°C~125°C for this part.The output of 5.2mA 5.2mA is low in terms of current while it is high in terms of voltage.As far as the design is concerned, the component is based on the 74HC221 family of components.There are a total of 16 terminations on it.Multivibrator can handle 5V voltage.There is a 2 input for data or a clock input on this board.16 pins are present on the part in total.The family HC/UH is represented by it.Integrated circuit is essential that the minimum supply voltage be greater than 2V in order to ensure that the supply voltage exceeds 2V.The chip runs properly with a voltage supply of 6V volts.Additional features of the part can be found by searching: NON-RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOParts belonging to the Prescaler/Multivibrators family are used in the electronic part. 74HC221DB,112 Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Supply Voltage: 5V 74HC221DB,112 ApplicationsThere are a lot of NXP USA Inc. 74HC221DB,112 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | 74HCT423DB,112 OverviewA 16-SSOP (0.209, 5.30mm Width) case holds the product.When packing equipment for Tube, it is advisable to take it along with you.The recommended mounting type is Surface Mount.There is a Monostable included in the logic type of the part.Voting is provided within the stipulated timeframe.These electrical components can be found in the 74HCT series.There is a minimum operating temperature that cannot be exceeded by this part.In the case of 4mA 4mA, the current output is low, while the voltage output is high.The component is designed based on the 74HCT423 family.The total number of terminations is 16.5V voltage can be handled by this device.This device has a clock input and a data input.There are a total of six 16 pins on the part.HCT family is the family that it belongs to.The minimum supply voltage must be greater than 4.5V if the supply voltage is to exceed 4.5V.Integrated circuit is required for this chip to be supplied wIntegrated Circuith a voltage supply of 5.5V volts in order to operate properly.Depending on the voltage, it can provide voltage in the range of 5V volts.This part also has the following extra features that you may be interested in: RETRIGGERABLEPrescaler/Multivibrators-family electronic parts are used in this part. 74HCT423DB,112 Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT423 Supply Voltage: 5V 74HCT423DB,112 ApplicationsThere are a lot of NXP USA Inc. 74HCT423DB,112 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | HEF4047BP,652 Overview14-DIP (0.300, 7.62mm) cases contain the product.Keeping equipment packed in case of Tube is a good idea.Mounting type Through Hole is the recommended one for this device.There is a logic type Astable, Monostable associated with the part.There is a supply of votage within 4.5V~15.5V hours.A 4000B series component includes this electrical component.Multivibrator is recommended that this part does not operate at a minimum temperature of -40°C~85°C.Multivibrator is designed on the basis of the 4047 family of components.There are a total of 14 terminations on it.5V voltage can be handled by it.It has 2 inputs for data or clock.Multivibrator consists of a total of five 14 pins on the part.The minimum supply voltage must be greater than 3V if the supply voltage is to exceed 3V. HEF4047BP,652 Featuresin 14-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Astable, Monostable Operating Temperature: 4000B based on 4047 Supply Voltage: 5V HEF4047BP,652 ApplicationsThere are a lot of NXP USA Inc. HEF4047BP,652 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | 74HC4538N,652 Overview16-DIP (0.300, 7.62mm) cases contain the product.Keeping equipment packed in case of Tube is a good idea.Mounting type Through Hole is the recommended one for this device.Part Monostable includes logic type Monostable.There is a vote within 2V~6V.74HC series electric components include this component.During the operation of this part, the minimum operating temperature must not exceed -40°C~125°C degrees Celsius.Compared to the voltage output, the current output of 5.2mA 5.2mA is low.In this component, the 74HC4538 family is used as the basis for design.The total number of terminations of this device is 16.There is no problem handling voltages up to 5V.It has 2 inputs for data or clock.There are a total of ten 16 pins on the part.Multivibrator is a member of the HC/UH family.Multivibrator is necessary to have a higher minimum supply voltage than 2V.If you would like your chip to run properly, it requires a voltage supply of 6V volts to operate.Additional features of the part can be found by searching: RETRIGGERABLEThere is an electronic part in the Prescaler/Multivibrators family. 74HC4538N,652 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 5V 74HC4538N,652 ApplicationsThere are a lot of NXP USA Inc. 74HC4538N,652 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74AHC123AMDREPG4 Overview16-SOIC (0.154, 3.90mm Width) cases contain the product.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).You should mount it with a Surface Mount type.Part Monostable includes logic type Monostable.There is a supply of votage within 2V~5.5V hours.Electrical components of this type are included in the 74AHC series.Multivibrator is recommended that this part does not operate at a minimum temperature of -55°C~125°C.Compared to the voltage output, the current output of 8mA 8mA is low.Multivibrator is designed on the basis of the 74AHC123 family of components.As a result, it has a total of 16 terminations.Voltages in the 3.3V range can be handled.It has 2 inputs for data or clock.There are a total of ten 16 pins on the part.A member of the AHC/VHC/H/U/V family, it has a number of characteristics.In this part, you can find 16 pins.Using Surface Mount, the device is mounted to the surface.The necessary minimum supply voltage ought to be greater than 2V.As a result, quiescent current is consumed at 4μA.5V volts of voltage is required to run this chip.In an IC chip, there are 2 bits.Current from the power supply is suggested to run under 0.04mA.Parts are packaged by TR. SN74AHC123AMDREPG4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHC based on 74AHC123 Supply Voltage: 3.3V Quiescent Current at 4μA 2 bits SN74AHC123AMDREPG4 ApplicationsThere are a lot of Texas Instruments SN74AHC123AMDREPG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74121DE4 OverviewMultivibrator is packaged in 14-SOIC (0.154, 3.90mm Width) case.In case of Tube, you should pack the equipment.Mounting type Surface Mount is the recommended one for this device.As part of the logic type, Monostable is included.We supply it within 4.75V~5.25V.Multivibrator is one of the electrical components that is included in the 7400 series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach 0°C~70°C.400μA 16mA's current output is low and its voltage output is high.The component is designed based on the SN74121 family.Overall, it has 14 terminations.5V voltage can be handled by it.A data or clock input can be connected to it through the 3 input.14 pins are present on the part in total.This is a part of the TTL/H/L family of computers.In this part, you can find 14 pins.Surface Mount mounts the device on the wall.A quiescent current is consumed at 13mA by it.There is a 5V volt specification for the chip's operating supply voltage.A device can be supplied with a current of output named 16mA if the output voltage is set appropriately.Depending on the voltage, it can provide voltage in the range of 5V volts.1 is the total number of bits on an IC chip.The power supply current is suggested to run under 40mA. SN74121DE4 Featuresin 14-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 7400 based on SN74121 Supply Voltage: 5V Quiescent Current at 13mA output current at 16mA 1 bits SN74121DE4 ApplicationsThere are a lot of Texas Instruments SN74121DE4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Klein Tools, Inc. | M74HC123RM13TR Overview16-SOIC (0.154, 3.90mm Width) cases contain the product.Keeping equipment packed in case of Tape & Reel (TR) is a good idea.The recommended mounting type for this product is Surface Mount.There is a logic type Monostable associated with the part.We supply it within 2V~6V.The 74HC series include this electrical component.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.There is a small current output of 5.2mA 5.2mA while there is a large voltage output from 5.2mA 5.2mA.Multivibrator is designed on the basis of the M74HC123 family of components.Total 16 terminations are present.There is no problem handling voltages up to 4.5V.As well as having 2 inputs for clocks and data, it also has a 2 output.Multivibrator consists of a total of five 16 pins on the part.The product belongs to the family of HC/UH products.Parts of the part have 16 pins.Surface Mount mounts the device on the wall.Minimum supply voltage should be greater than 2V.Its operating supply voltage is 5V volts.For the chip to operate properly, a voltage supply of 6V volts needs to be provided to it.The output current that can be supplied to the device is 5.2mA.Using the search bar, you can find the additional features of the part: RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSO. M74HC123RM13TR Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on M74HC123 Supply Voltage: 4.5V output current at 5.2mA M74HC123RM13TR ApplicationsThere are a lot of STMicroelectronics M74HC123RM13TR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS423NG4 OverviewIn this case, the product is packaged in a 16-DIP (0.300, 7.62mm) case.Multivibrator is recommended that you pack the equipment in case of Tube.Multivibrator is recommended that you use a Through Hole mounting type for Multivibrator.Part Monostable includes logic type Monostable.There is a supply of votage within 4.75V~5.25V hours.Multivibrator is one of the electrical components that is included in the 74LS series.The minimum operating temperature of this part must not be 0°C~70°C.The output of 400μA 8mA is low in terms of current while it is high in terms of voltage.The component is designed based on the 74LS423 family. SN74LS423NG4 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74LS based on 74LS423 SN74LS423NG4 ApplicationsThere are a lot of Texas Instruments SN74LS423NG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | 74HCT221DB,118 OverviewA 16-SSOP (0.209, 5.30mm Width) case holds the product.As a precaution, it is advisable to pack the equipment in case something goes wrong.Surface Mount mounting is recommended.There is a logic type Monostable associated with the part.Votage is supplied within a period of time called 4.5V~5.5V.These electrical components can be found in the 74HCT series.The minimum operating temperature of this part must not be -40°C~125°C.In the case of 4mA 4mA, the current output is low, while the voltage output is high.This component has been designed based on the 74HCT221 family of components.Overall, it has 16 terminations.There is no problem handling voltages up to 5V.A data or clock input can be connected to it through the 2 input.16 pins are located on the part in total.The HCT family is responsible for it.Supply voltages must be higher than 4.5V to meet the minimum requirement.This part's maximum supply voltage (Vsup) should not exceed 5.5V volts.Voltage can be delivered at 5V volts by it.This part also has the following extra features that you may be interested in: NON-RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOElectronic parts of this product are part of the Prescaler/Multivibrators series. 74HCT221DB,118 Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT221 Supply Voltage: 5V 74HCT221DB,118 ApplicationsThere are a lot of NXP USA Inc. 74HCT221DB,118 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Klein Tools, Inc. | M74HC221RM13TR OverviewA 16-SOIC (0.154, 3.90mm Width) case holds the product.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).You should mount it with a Surface Mount type.There is a Monostable included in the logic type of the part.Votage is supplied within a period of time called 2V~6V.These electrical components can be found in the 74HC series.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.Compared to the voltage output, the current output of 5.2mA 5.2mA is low.The component is designed based on the M74HC221 family.16 terminations are present in total.4.5V voltage can be handled by it.Data and clock inputs are provided through 2 inputs.Multivibrator has a total of six 16 pins.The product belongs to the family of HC/UH products.Multivibrator is possible to mount 16 pins on this part if you wish.Surface Mount mounts the device on the wall.The minimum supply voltage must be greater than 2V if the supply voltage is to exceed 2V.During quiescent time, it consumes current at 4μA.Its operating supply voltage is 5V volts.Integrated circuit is required for this chip to be supplied wIntegrated Circuith a voltage supply of 6V volts in order to operate properly.Input current to the device is 5.2mA.Integrated circuit consists of 2 elements.A maximum supply current of 4μA can be handled by this device. M74HC221RM13TR Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on M74HC221 Supply Voltage: 4.5V Quiescent Current at 4μA output current at 5.2mA M74HC221RM13TR ApplicationsThere are a lot of STMicroelectronics M74HC221RM13TR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV221AQPWRQ1 OverviewThere is a 16-TSSOP (0.173, 4.40mm Width) case in which it is packaged.When packing equipment for Tape & Reel (TR), it is advisable to take it along with you.Surface Mount is recommended for mounting.A part's logic type includes Monostable as part of its logic.Voting is provided within the stipulated timeframe.This electrical component is included in the Automotive, AEC-Q100, 74LV series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -40°C~125°C.Multivibrator causes 12mA 12mA low,high output current.74LV221 is the basis for the design of the component.16 terminations are present in total.Voltages in the 3.3V range can be handled.This device has a clock input and a data input.Multivibrator consists of a total of five 16 pins on the part.The product belongs to the family of LV/LV-A/LVX/H products.In the part, there are 16 pins.Multivibrator is mounted by Surface Mount.The necessary minimum supply voltage ought to be greater than 2V.At 20μA, it consumes a quiescent current that is consumed by it.The operating supply voltage for the chip is specified as 5V volts.There are 2 bits on an IC chip, and they total up to the total amount of bits.Integrated circuit contains 2 elements.Designed and packaged by TR. SN74LV221AQPWRQ1 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: Automotive, AEC-Q100, 74LV based on 74LV221 Supply Voltage: 3.3V Quiescent Current at 20μA 2 bits SN74LV221AQPWRQ1 ApplicationsThere are a lot of Texas Instruments SN74LV221AQPWRQ1 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Klein Tools, Inc. | HCF4098BEY OverviewIn this case, the product is packaged in a 16-DIP (0.300, 7.62mm) case.Multivibrator is recommended that you pack the equipment in case of Tube.Multivibrator is recommended to mount Multivibrator on a Through Hole-axis.There is a Monostable included in the logic type of the part.Votage is provided within a specified period of time within 3V~20V.Electrical components of this type are included in the 4000B series.A minimum operating temperature of -55°C~125°C must not be reached by this part.6.8mA 6.8mA's current output is low and its voltage output is high.A HCF4098-family component is used to design the component.Total 16 terminations are present.Multivibrator is capable of handling voltages up to 5V.It has 2 inputs for data or clock.Part 16 has a total of four pins.It belongs to 4000/14000/40000 family.In the part, there are 16 pins that are available for use.Using Through Hole, the device is mounted to the surface.The necessary minimum supply voltage ought to be greater than 3V.During quiescent time, it consumes current at 20μA.There is a 12V volt specification for the chip's operating supply voltage.There is a limit on the amount of output current that can be provided to the device, which is called 6.8mA.Integrated circuit can give voltage at 3/15V volts.You can search the additional features of the part: RETRIGGERABLEA 2 element is present in it.With this device, it is possible to supply currents up to 20μA in maximum. HCF4098BEY Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 4000B based on HCF4098 Supply Voltage: 5V Quiescent Current at 20μA output current at 6.8mA HCF4098BEY ApplicationsThere are a lot of STMicroelectronics HCF4098BEY applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4538PWG4 OverviewMultivibrator is packaged in 16-TSSOP (0.173, 4.40mm Width) case.Multivibrator is advised to pack the equipment in case of Tube.Multivibrator recommended mounting type is Surface Mount.There is a logic type Monostable associated with the part.Votage is supplied within a period of time called 2V~6V.The 74HC series include this electrical component.The minimum operating temperature of this part must not be -55°C~125°C.Despite the high voltage output, 5.2mA 5.2mA outputs a low current.This component has been designed based on the 74HC4538 family of components.The total number of terminations is 16.There is no problem handling voltages up to 4.5V.Data or clock inputs are available on 2 inputs.There are a total of ten 16 pins on the part.Multivibrator is a member of the HC/UH family.In this part, you can find 16 pins.Surface Mount mounts the device on top of the base.The minimum supply voltage must be greater than 2V in order to ensure that the supply voltage exceeds 2V.In the state of quiescence, it consumes a lot of current at 8μA.There is a 5V volt specification for the chip's operating supply voltage.In order for this chip to function correctly, it is required a voltage supply of 6V volts.There is a limit to how much current the device can supply in terms of output current.In this case, it contains 2 elements. CD74HC4538PWG4 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA CD74HC4538PWG4 ApplicationsThere are a lot of Texas Instruments CD74HC4538PWG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Klein Tools, Inc. | M74HC221B1R Overview16-DIP (0.300, 7.62mm) cases contain the product.In case of Tube, the equipment should be packed.Through Hole is recommended for mounting.There is a Monostable included in the logic type of the part.Votage is supplied within a period of time called 2V~6V.These electrical components can be found in the 74HC series.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.Voltage output of 5.2mA 5.2mA exceeds current output.Based on the M74HC221 family, the component is designed.16 terminations are present in total.4.5V voltage can be handled by this device.Data or clock inputs are available on 2 inputs.As a whole, there are ten 16 pins on this part.It belongs to HC/UH family.There are 16 pins available in the part.Through Hole is used to mount the device.Supply voltages must be higher than 2V to meet the minimum requirement.In the state of quiescence, it consumes a lot of current at 4μA.The operating supply voltage for the chip is specified as 5V volts.To function properly, this chip requires a voltage supply of 6V volts in order to operate.There is a limit on the amount of output current that can be provided to the device, which is called 5.2mA.Integrated circuit consists of 2 elements.There is a maximum supply current of 4μA that it can handle. M74HC221B1R Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HC based on M74HC221 Supply Voltage: 4.5V Quiescent Current at 4μA output current at 5.2mA M74HC221B1R ApplicationsThere are a lot of STMicroelectronics M74HC221B1R applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | 74HCT423PW,118 OverviewA 16-TSSOP (0.173, 4.40mm Width) case holds the product.Keeping equipment packed in case of Tape & Reel (TR) is a good idea.Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.A part's logic type includes Monostable as part of its logic.Multivibrator is provided in a quantMultivibratory of 4.5V~5.5V.A 74HCT series component includes this electrical component.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -40°C~125°C.In the case of 4mA 4mA, the current output is low, while the voltage output is high.A 74HCT423-family component is used to design the component.As a result, it has a total of 16 terminations.There is no problem handling voltages up to 5V.Data or clock inputs are available on 2 inputs.The part has a total of 16 pins.The family HCT is represented by it.Multivibrator is necessary to have a higher minimum supply voltage than 4.5V.The chip runs properly with a voltage supply of 5.5V volts.There is a possibility of giving voltage at 5V volts using this device.RETRIGGERABLE is the part's additional features search field.There is an electronic part in the Prescaler/Multivibrators family. 74HCT423PW,118 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT423 Supply Voltage: 5V 74HCT423PW,118 ApplicationsThere are a lot of NXP USA Inc. 74HCT423PW,118 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS423DRG4 OverviewPackaged in a 16-SOIC (0.154, 3.90mm Width) case, it comes with a guarantee.As a precaution, it is advisable to pack the equipment in case something goes wrong.The recommended mounting type is Surface Mount.This part has Monostable as its logic type.We supply it within 4.75V~5.25V.These electrical components can be found in the 74LS series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach 0°C~70°C.Multivibrator causes 400μA 8mA low,high output current.As far as the design is concerned, the component is based on the 74LS423 family of components.Overall, it has 16 terminations.5V voltage can be handled by this device.There is a 2 input for data or a clock input on this board.The part has a total of 16 pins.This is a part of the LS family of computers.Multivibrator is possible to mount 16 pins on this part if you wish.As shown in the picture, Surface Mount is mounting the device.5V voltage is specified for the chip's operating supply.A device can be supplied with a current of output named 8mA if the output voltage is set appropriately.Integrated circuit can give voltage at 5V volts. SN74LS423DRG4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS423 Supply Voltage: 5V output current at 8mA SN74LS423DRG4 ApplicationsThere are a lot of Texas Instruments SN74LS423DRG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS423DRE4 OverviewThe product comes in a 16-SOIC (0.154, 3.90mm Width) case.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).The recommended mounting type for this product is Surface Mount.The logic type of the part includes the letter Monostable in its name.Votage is provided within a specified period of time within 4.75V~5.25V.Multivibrator is included in the 74LS series of electrical components.Multivibrator is recommended that this part does not operate at a minimum temperature of 0°C~70°C.Multivibrator is observed that the current output of 400μA 8mA is low, while the voltage output of 400μA 8mA is high.This component has been designed based on the 74LS423 family of components.The total number of terminations of this device is 16.5V voltage can be handled by it.Data or clock inputs are available on 2 inputs.The part has a total of 16 pins.The product belongs to the family of LS products.There are 16 pins available in the part.Surface Mount mounts the device on top of the base.Specifically, 5V volts are the operating supply voltage.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 8mA.Integrated circuit can provide voltage up to 5V volts. SN74LS423DRE4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS423 Supply Voltage: 5V output current at 8mA SN74LS423DRE4 ApplicationsThere are a lot of Texas Instruments SN74LS423DRE4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| MG Chemicals | HEF4938BT,112 OverviewPackaged in a 16-SOIC (0.154, 3.90mm Width) case, it comes with a guarantee.If Tube happens, pack the equipment accordingly.Multivibrator recommended mounting type is Surface Mount.The part's logic type includes Monostable.Multivibrator is one of the electrical components that is included in the 4000B series.The minimum operating temperature of this part must not be -40°C~85°C.In this component, the 4938 family is used as the basis for design.16 terminations are present in total.5V voltage can be handled by it.There are 2 inputs for data and clock.Part 16 has a total of four pins.4000/14000/40000 family is the family that it belongs to.The necessary minimum supply voltage ought to be greater than 3V.In order for this chip to function correctly, it is required a voltage supply of 15V volts.Integrated circuit can give voltage at 5/15V volts.Parts belonging to the Prescaler/Multivibrators family are used in the electronic part. HEF4938BT,112 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 4000B based on 4938 Supply Voltage: 5V HEF4938BT,112 ApplicationsThere are a lot of NXP USA Inc. HEF4938BT,112 applications of multivibrators.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
