My CartShock Sensors(630)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Ultralife | CD74HCT423MT OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.In case of Tape & Reel (TR), you should pack the equipment.Surface Mount is recommended for mounting.A part's logic type includes Monostable as part of its logic.Voting is provided within the stipulated timeframe.There is an electrical component included in the 74HCT series.A minimum operating temperature of -55°C~125°C must not be reached by this part.The output of 4mA 4mA is low in terms of current while it is high in terms of voltage.This component has been designed based on the 74HCT423 family of components.There are a total of 16 terminations.5V voltage can be handled by this device.It has 2 inputs for data or clock.16 pins are present on the part in total.The HCT family is what it belongs to.Multivibrator is necessary to have a higher minimum supply voltage than 4.5V.To function properly, this chip requires a voltage supply of 5.5V volts in order to operate.Integrated circuit can provide voltage up to 5V volts.There are 2 bits on an IC chip, and they total up to the total amount of bits.The part's additional features can be searched here: RETRIGGERABLEUsing the 0.08mA setting would be best for power supply current.The part is packaged by TR.There is an electronic part in the Prescaler/Multivibrators family. CD74HCT423MT Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT423 Supply Voltage: 5V 2 bits CD74HCT423MT ApplicationsThere are a lot of Texas Instruments CD74HCT423MT applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC221E Overview16-DIP (0.300, 7.62mm) cases package it.The equipment should be packed in case of Tube, so that it can be used in an emergency.Multivibrator is recommended that you use a Through Hole mounting type for Multivibrator.As part of the logic type, Monostable is included.During the period of 2V~6V, it is supplied with the required amount of votes.Multivibrator is one of the electrical components that is included in the 74HC series.Unless otherwise specified, this part must operate at no lower than -55°C~125°C degrees Celsius.Compared to the voltage output, the current output of 5.2mA 5.2mA is low.As far as the design is concerned, the component is based on the 74HC221 family of components.In the part, there are 16 pins that are available for use.Using Through Hole, the device is mounted to the surface.As 8μA increases, it consumes more quiescent current.5V volts of voltage is required to run this chip.A device such as this can deliver an output current of 5.2mA to the input current.The total amount of bits on an IC chip is 2.2 elements are included in it.A 16-PDIP package is a 16-PDIP package.Utilizing it when the temperature is below 125°C is recommended.The minimum working temperature of this device cannot be lower than -55°C.On the device, there are 2 circuits available for use.Integrated circuit can be used wIntegrated circuith a maximum supply voltage of 6V.With the minimal supply voltage of 2V, it can be made to work. CD74HC221E Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC221E ApplicationsThere are a lot of Texas Instruments CD74HC221E applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HCT221MT Overview16-SOIC (0.154, 3.90mm Width) cases contain the product.If Tape & Reel (TR) happens, pack the equipment accordingly.Multivibrator recommended mounting type is Surface Mount.As part of the logic type, Monostable is included.During the period of 4.5V~5.5V, it is supplied with the required amount of votes.There is an electrical component in the 74HCT series.Unless otherwise specified, this part must operate at no lower than -55°C~125°C degrees Celsius.In the case of 4mA 4mA, the current output is low, while the voltage output is high.The component is designed based on the 74HCT221 family.There are a total of 16 terminations.There is no problem handling voltages up to 5V.The device has a 2 input for clocks or data.There are a total of ten 16 pins on the part.The product belongs to the family of HCT products.In this part, you can find 16 pins.The device is mounted by Surface Mount.A quiescent current is consumed at 8μA by it.5V volts is the chip's operating supply voltage.A device can be supplied with a current of output named 4mA if the output voltage is set appropriately.Integrated circuit can give voltage at 5V volts.There are a total of 2 bits on an IC chip, which is the total number of bits.An element with 2 elements can be found in it.Under 0.08mA, the power supply current should be run.The part is packaged by TR. CD74HCT221MT Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT221 Supply Voltage: 5V Quiescent Current at 8μA output current at 4mA 2 bits CD74HCT221MT ApplicationsThere are a lot of Texas Instruments CD74HCT221MT applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74AHCT123APWR OverviewThe product comes in a 16-TSSOP (0.173, 4.40mm Width) case.As a precaution, it is advisable to pack the equipment in case something goes wrong.You should mount it with a Surface Mount type.There are two logic types for this part, Logic Type A and Logic Type B.There is a vote within 4.5V~5.5V.This electrical component is included in the 74AHCT series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -40°C~85°C.Compared to the voltage output, the current output of 8mA 8mA is low.As far as the design is concerned, the component is based on the 74AHCT123 family of components.As a whole, it has 16 terminations.The device is capable of handling voltages up to 5V.It has 2 inputs for data or clock.There are a total of six 16 pins on the part.Multivibrator is a member of the AHCT/VHCT/VT family.The part includes 16 pins.There is a Surface Mount which mounts the device.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.In the state of quiescence, it consumes a lot of current at 4μA.The operating supply voltage for the chip is specified as 5V volts.There is a limit to the amount of output current that can be supplied to the device by 8mA.Depending on the voltage, it can provide voltage in the range of 5V volts.2 is the total amount of bits on an IC chip.Using the search bar, you can find the additional features of the part: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS.Under 0.975mA, the power supply current should be run.Integrated circuit is packaged by TR.This device includes 2 circuits. SN74AHCT123APWR Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHCT based on 74AHCT123 Supply Voltage: 5V Quiescent Current at 4μA output current at 8mA 2 bits SN74AHCT123APWR ApplicationsThere are a lot of Texas Instruments SN74AHCT123APWR applications of multivibrators.
|
8627
In-stock
|
Get Quote | |||
| Ultralife | SN74AHCT123ADBR OverviewThe product is packaged in a 16-SSOP (0.209, 5.30mm Width) case.The equipment should be packed in case of Cut Tape (CT), so that it can be used in an emergency.Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.Part Monostable includes logic type Monostable.Votage is supplied within a period of time called 4.5V~5.5V.Multivibrator is one of the electrical components that is included in the 74AHCT series.Multivibrator is not permMultivibratorted to operate this part below -40°C~85°C°F.The output of 8mA 8mA is low in terms of current while it is high in terms of voltage.Multivibrator is designed on the basis of the 74AHCT123 family of components.There are a total of 16 terminations.5V voltage can be handled by it.Data and clock inputs are provided through 2 inputs.There are a total of ten 16 pins on the part.The product belongs to the family of AHCT/VHCT/VT products.In this part, you can find 16 pins.Multivibrator is mounted by Surface Mount.Supply voltages must be higher than 2V to meet the minimum requirement.As 4μA increases, it consumes more quiescent current.Specifically, 5V volts are the operating supply voltage.A device can be supplied with a current of output named 8mA if the output voltage is set appropriately.The voltage that it can output can be as high as 5V volts.IC chips have 2 bits total.The power supply current is suggested to run under 0.975mA.Packaging is handled by TR.On the device, there is a 2 circuit that can be used. SN74AHCT123ADBR Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHCT based on 74AHCT123 Supply Voltage: 5V Quiescent Current at 4μA output current at 8mA 2 bits SN74AHCT123ADBR ApplicationsThere are a lot of Texas Instruments SN74AHCT123ADBR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC221NSR OverviewA 16-SOIC (0.209, 5.30mm Width) case holds the product.The equipment should be packed in case of Tape & Reel (TR), so that it can be used in an emergency.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.Part Monostable includes logic type Monostable.We supply it within 2V~6V.Electrical components of this type are included in the 74HC series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -55°C~125°C.There is a small current output of 5.2mA 5.2mA while there is a large voltage output from 5.2mA 5.2mA.Designed based on the 74HC221 family, the component features a number of features.As a result, it has a total of 16 terminations.4.5V voltage can be handled by it.As well as having 2 inputs for clocks and data, it also has a 2 output.Multivibrator has a total of six 16 pins.This is a part of the HC/UH family of computers.In the part, there are 16 pins.Using Surface Mount, the device is mounted to the surface.Minimum supply voltage must be greater than 2V in order for the supply voltage to exceed 2V.8μA consumes quiescent current.5V volts is the chip's operating supply voltage.To function properly, this chip requires a voltage supply of 6V volts in order to operate.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 5.2mA.IC chips contain 2 bits in total.In this case, it contains 2 elements.The power supply current is suggested to run under 0.08mA.Packaged by TR is the part. CD74HC221NSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC221NSR ApplicationsThere are a lot of Texas Instruments CD74HC221NSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HCT221M96 OverviewThe product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Pack the equipment in case of Cut Tape (CT).Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.The logic type of the part includes Monostable.Multivibrator is provided in a quantMultivibratory of 4.5V~5.5V.This electrical component is included in the 74HCT series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -55°C~125°C.Multivibrator causes 4mA 4mA low,high output current.Based on the 74HCT221 family, the component is designed.There are a total of 16 terminations.Multivibrator is capable of handling voltages up to 5V.A data or clock input can be connected to it through the 2 input.Part 16 has a total of four pins.A member of the HCT family, it has a number of characteristics.Multivibrator is possible to mount 16 pins on this part if you wish.There is a Surface Mount which mounts the device.A quiescent current is consumed at 8μA by it.Specifically, 5V volts are the operating supply voltage.An output current of 4mA can be supplied to a device to provide an output current to the device.Voltage can be provided at 5V volts by this device.2 is the total number of bits on an IC chip.Using the 0.08mA setting would be best for power supply current.TR is the company responsible for packaging the part.This device includes 2 circuits. CD74HCT221M96 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT221 Supply Voltage: 5V Quiescent Current at 8μA output current at 4mA 2 bits CD74HCT221M96 ApplicationsThere are a lot of Texas Instruments CD74HCT221M96 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC423NSR Overview16-SOIC (0.209, 5.30mm Width) cases package it.When packing equipment for Tape & Reel (TR), it is advisable to take it along with you.Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.The part's logic type includes Monostable.Voting is provided within the stipulated timeframe.This electrical component is included in the 74HC series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -55°C~125°C.In the case of 5.2mA 5.2mA, the current output is low, while the voltage output is high.Based on the 74HC423 family, the component is designed.Multivibrator has 16 terminations in total.Multivibrator is possible for the device to handle the 4.5V voltage.There are 2 inputs for data and clock.There are a total of 16 16 pins on the part.The HC/UH family is what it belongs to.16 pins are available on the part.Surface Mount mounts the device on top of the base.The minimum supply voltage must be greater than 2V in order to ensure that the supply voltage exceeds 2V.There is a quiescent current consumption at 8μA.Its operating supply voltage is 5V volts.Chips like this one require 6V volts to run properly.The output current that can be supplied to the device is 5.2mA.There are 2 bits on an IC chip, and they total up to the total amount of bits.Integrated circuit is possible to search the addIntegrated circuitional features of the part using the following search terms: RETRIGGERABLEThere are 2 elements in it.Using 0.08mA is recommended for power supply current.Packaged by TR is the part. CD74HC423NSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC423 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC423NSR ApplicationsThere are a lot of Texas Instruments CD74HC423NSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV221APWR OverviewThere is a 16-TSSOP (0.173, 4.40mm Width) case packaging.Keeping equipment packed in case of Tape & Reel (TR) is a good idea.Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.The part's logic type includes Monostable.Voting is provided within the stipulated timeframe.Multivibrator is included in the 74LV series of electrical components.In order for this part to operate properly, the minimum operating temperature should not be -40°C~85°C.Multivibrator is observed that the current output of 12mA 12mA is low, while the voltage output of 12mA 12mA is high.A 74LV221-family component is used to design the component.There are a total of 16 terminations.Voltages in the 2.5V range can be handled.A data or clock input can be connected to it through the 2 input.The part has a total of 16 pins.There is a LV/LV-A/LVX/H family member.The part includes 16 pins.Surface Mount mounts the device on the wall.Multivibrator is necessary to have a higher minimum supply voltage than 2V.20μA consumes quiescent current.To function properly, this chip requires a voltage supply of 5V volts.The output current that can be supplied to the device is 12mA.This device is capable of giving voltages up to 3.3V volts.IC chips have a total number of bits of 2, which is the total number of bits on the chip.An element with 2 elements can be found in it.Packaging is handled by TR. SN74LV221APWR Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV221 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV221APWR ApplicationsThere are a lot of Texas Instruments SN74LV221APWR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS123DR OverviewThe product comes in a 16-SOIC (0.154, 3.90mm Width) case.As a precaution, it is advisable to pack the equipment in case something goes wrong.Surface Mount mounting is recommended.The part's logic type includes Monostable.Votage is provided within a specified period of time within 4.75V~5.25V.A 74LS series component includes this electrical component.Multivibrator is recommended that this part does not operate at a minimum temperature of 0°C~70°C.400μA 8mA's current output is low and its voltage output is high.Designed based on the 74LS123 family, the component features a number of features.The total number of terminations is 16.You can use it with 5V voltage.There is a 2 input for data or a clock input on this board.There are a total of 16 16 pins on the part.LS family is the family that it belongs to.16 pins are included in the specification for the part.The device is mounted by Surface Mount.There is a quiescent current consumption at 12mA.Its operating supply voltage is 5V volts.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 8mA.Depending on the voltage, it can provide voltage in the range of 5V volts.IC chips contain 2 bits in total.RETRIGGERABLE is the part's additional features search field.Integrated circuit contains 2 elements.Packaged by TR is the part.Integrated circuit is capable of handling a maximum supply current of 12mA volts. SN74LS123DR Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS123 Supply Voltage: 5V Quiescent Current at 12mA output current at 8mA 2 bits SN74LS123DR ApplicationsThere are a lot of Texas Instruments SN74LS123DR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS221NSR Overview16-SOIC (0.209, 5.30mm Width) cases contain the product.If Tape & Reel (TR) happens, pack the equipment accordingly.Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.Part Monostable includes logic type Monostable.There is a supply of votage within 4.75V~5.25V hours.The 74LS series include this electrical component.The minimum operating temperature of this part must not be 0°C~70°C.Multivibrator causes 400μA 8mA low,high output current.This component has been designed based on the 74LS221 family of components.The total number of terminations of this device is 16.5V voltage can be handled by it.There are 2 inputs for data and clock.16 pins are present on the part in total.The LS family is what it belongs to.Specifications include 16 pins for the part.The device is mounted by Surface Mount.A quiescent current is consumed at 4.7mA by it.The operating supply voltage for the chip is specified as 5V volts.A device can be supplied with a current of output named 8mA if the output voltage is set appropriately.Depending on the voltage, it can provide voltage in the range of 5V volts.IC chips contain 2 bits in total.The element consists of 2 elements.The part is packaged by TR. SN74LS221NSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS221 Supply Voltage: 5V Quiescent Current at 4.7mA output current at 8mA 2 bits SN74LS221NSR ApplicationsThere are a lot of Texas Instruments SN74LS221NSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS423NSR OverviewThe product comes in a 16-SOIC (0.209, 5.30mm Width) case.As a precaution, it is advisable to pack the equipment in case something goes wrong.Mounting type Surface Mount is the recommended one for this device.There is a logic type Monostable associated with the part.There is a supply of votage within 4.75V~5.25V hours.The 74LS series include this electrical component.In order for this part to operate properly, the minimum operating temperature should not be 0°C~70°C.In the case of 400μA 8mA, the current output is low, while the voltage output is high.As far as the design is concerned, the component is based on the 74LS423 family of components.16 terminations are present in total.There is no problem handling voltages up to 5V.Data or clock inputs are available on 2 inputs.There are a total of ten 16 pins on the part.The product belongs to the family of LS products.Specifications include 16 pins for the part.Surface Mount mounts the device on the wall.As 12mA increases, it consumes more quiescent current.5V volts is the operating supply voltage for the chip.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 8mA.Integrated circuit can provide voltage up to 5V volts.IC chips contain 2 bits in total.An element with 2 elements can be found in it.Packaged by TR is the part. SN74LS423NSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS423 Supply Voltage: 5V Quiescent Current at 12mA output current at 8mA 2 bits SN74LS423NSR ApplicationsThere are a lot of Texas Instruments SN74LS423NSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV221ANSR OverviewIn this case, the product is packaged in a 16-SOIC (0.209, 5.30mm Width) case.When packing equipment for Cut Tape (CT), it is advisable to take it along with you.The recommended mounting type is Surface Mount.There are two logic types for this part, Logic Type A and Logic Type B.There is a vote within 2V~5.5V.This electrical component is included in the 74LV series.A minimum operating temperature of -40°C~85°C must not be reached by this part.Compared to the voltage output, the current output of 12mA 12mA is low.This component has been designed based on the 74LV221 family of components.As a result, it has a total of 16 terminations.Multivibrator can handle 2.5V voltage.There is a 2 input for data or a clock input on this board.As a whole, there are ten 16 pins on this part.A member of the LV/LV-A/LVX/H family, it has a number of characteristics.16 pins are included in the specification for the part.Using Surface Mount, the device is mounted to the surface.Minimum supply voltage must be greater than 2V in order for the supply voltage to exceed 2V.At 20μA, it consumes a small amount of quiescent current.There is a 5V volt specification for the chip's operating supply voltage.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 12mA.This device is capable of giving voltages up to 3.3V volts.There are a total of 2 bits on an IC chip, which is the total number of bits.This part is packaged by a company called TR.In terms of circuitry, the device is equipped with 2 circuits. SN74LV221ANSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV221 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV221ANSR ApplicationsThere are a lot of Texas Instruments SN74LV221ANSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4538NSR OverviewThere is a 16-SOIC (0.209, 5.30mm Width) case packaging.In case of Tape & Reel (TR), the equipment should be packed.Surface Mount mounting is recommended.The logic type of the part includes Monostable.Multivibrator is supplied votage wMultivibratorhin 2V~6V.There is an electrical component included in the 74HC series.The minimum operating temperature of this part must not be -55°C~125°C.The output of 5.2mA 5.2mA is low in terms of current while it is high in terms of voltage.Based on the 74HC4538 family, the component is designed.There are a total of 16 terminations.There is no problem handling voltages up to 4.5V.The device has a 2 input for clocks or data.Multivibrator has a total of six 16 pins.This is a part of the HC/UH family of computers.In the part, there are 16 pins.Using Surface Mount, the device is mounted to the surface.The necessary minimum supply voltage ought to be greater than 2V.As 8μA increases, it consumes more quiescent current.5V voltage is specified for the chip's operating supply.In order for this chip to function correctly, it is required a voltage supply of 6V volts.A device can be supplied with a current of output named 5.2mA if the output voltage is set appropriately.An IC chip is made up of 2 bits in total.The element consists of 2 components.There is a recommendation to run the power supply current under 0.08mA.TR is the company that packages the part. CD74HC4538NSR Featuresin 16-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC4538NSR ApplicationsThere are a lot of Texas Instruments CD74HC4538NSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74AHC123AMDREP OverviewIn this case, the product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.As part of the logic type, Monostable is included.Multivibrator is provided in a quantMultivibratory of 2V~5.5V.There is an electrical component included in the 74AHC series.Unless otherwise specified, this part must operate at no lower than -55°C~125°C degrees Celsius.There is a small current output of 8mA 8mA while there is a large voltage output from 8mA 8mA.As far as the design is concerned, the component is based on the 74AHC123 family of components.Total 16 terminations are present.3.3V voltage can be handled by it.There are 2 inputs for data and clock.As a whole, there are ten 16 pins on this part.The AHC/VHC/H/U/V family is responsible for it.Multivibrator is possible to mount 16 pins on this part if you wish.The device is mounted by Surface Mount.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.During quiescent time, it consumes current at 4μA.There is a 5V volt specification for the chip's operating supply voltage.There is a limit on the amount of output current that can be provided to the device, which is called 8mA.IC chips contain 2 bits in total.There are 2 elements in it.Under 0.04mA, it is recommended to run the power supply current.As far as packaging is concerned, TR is responsible. SN74AHC123AMDREP Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHC based on 74AHC123 Supply Voltage: 3.3V Quiescent Current at 4μA output current at 8mA 2 bits SN74AHC123AMDREP ApplicationsThere are a lot of Texas Instruments SN74AHC123AMDREP applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC423E Overview16-DIP (0.300, 7.62mm) cases package it.If Tube happens, pack the equipment accordingly.Multivibrator recommended mounting type is Through Hole.As part of the logic type, Monostable is included.Votage is supplied within a period of time called 2V~6V.These electrical components can be found in the 74HC series.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.The output of 5.2mA 5.2mA is low in terms of current while it is high in terms of voltage.Designed based on the 74HC423 family, the component features a number of features.The total number of terminations is 16.You can use it with 4.5V voltage.There is a 2 input for data or a clock input on this board.As a whole, there are ten 16 pins on this part.A member of the HC/UH family, it has a number of characteristics.Specifications include 16 pins for the part.The device is mounted by Through Hole.Minimum supply voltage must be greater than 2V for the supply voltage to be greater than 2V.There is a quiescent current consumption at 8μA.5V voltage is specified for the chip's operating supply.Chips like this one require 6V volts to run properly.A device such as this can deliver an output current of 5.2mA to the input current.In an IC chip, there are 2 bits.This part also has the following extra features that you may be interested in: RETRIGGERABLEThere is a recommendation to run the power supply current under 0.08mA. CD74HC423E Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HC based on 74HC423 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC423E ApplicationsThere are a lot of Texas Instruments CD74HC423E applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC423M OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case in which it is packaged.Keeping equipment packed in case of Tube is a good idea.The recommended mounting type is Surface Mount.Part Monostable includes logic type Monostable.Votage is provided within a specified period of time within 2V~6V.A 74HC series component includes this electrical component.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.The output of 5.2mA 5.2mA is low in terms of current while it is high in terms of voltage.A 74HC423-family component is used to design the component.As a whole, it has 16 terminations.Multivibrator is possible for the device to handle the 4.5V voltage.There are 2 inputs for data and clock.There are a total of 16 16 pins on the part.A member of the HC/UH family, it has a number of characteristics.There are 16 pins available in the part.Surface Mount is used to mount the device.The necessary minimum supply voltage ought to be greater than 2V.Integrated circuit consumes quiescent current at 8μA.5V volts is the operating supply voltage for the chip.For the chip to operate properly, a voltage supply of 6V volts needs to be provided to it.A device such as this can deliver an output current of 5.2mA to the input current.There are 2 bits on an IC chip, and they total up to the total amount of bits.Here is a search engine you can use to search for additional features of the part: RETRIGGERABLEUnder 0.08mA, it is recommended to run the current from the power supply. CD74HC423M Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC423 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC423M ApplicationsThere are a lot of Texas Instruments CD74HC423M applications of multivibrators.
|
3120
In-stock
|
Get Quote | |||
| Ultralife | CD14538BMT OverviewMultivibrator is packaged in 16-SOIC (0.154, 3.90mm Width) case.If Tape & Reel (TR) happens, pack the equipment accordingly.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.There is a Monostable included in the logic type of the part.Multivibrator is provided in a quantMultivibratory of 3V~18V.There is an electrical component included in the 4000B series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -55°C~125°C.Voltage output of 6.8mA 6.8mA exceeds current output.A component based on the CD14538 family is designed.As a result, it has a total of 16 terminations.Multivibrator is possible for the device to handle the 5V voltage.There is a 2 input for data or a clock input on this board.There are a total of 16 16 pins on the part.This is a part of the 4000/14000/40000 family of computers.16 pins are available on the part.Using Surface Mount, the device is mounted to the surface.The minimum supply voltage must be greater than 3V if the supply voltage is to exceed 3V.There is a quiescent current consumption at 100μA.The operating supply voltage for the chip is specified as 12V volts.Chips like this one require 18V volts to run properly.Integrated circuit is possible for the device to output a current of 6.8mA as an output current.Using it, you can get voltage at 5/15V volts.2 is the total number of bits on an IC chip.You can search the additional features of the part: RETRIGGERABLEAn element with 2 elements can be found in it.Under 0.3mA, the power supply current should be run.TR is the company that packages the part. CD14538BMT Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 4000B based on CD14538 Supply Voltage: 5V Quiescent Current at 100μA output current at 6.8mA 2 bits CD14538BMT ApplicationsThere are a lot of Texas Instruments CD14538BMT applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LS122D OverviewIn this case, the product is packaged in a 14-SOIC (0.154, 3.90mm Width) case.If Tube happens, pack the equipment accordingly.Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.There are two logic types for this part, Logic Type A and Logic Type B.There is a supply of votage within 4.75V~5.25V hours.The 74LS series include this electrical component.Multivibrator is recommended that this part does not operate at a minimum temperature of 0°C~70°C.Despite the high voltage output, 400μA 8mA outputs a low current.Based on the 74LS122 family, the component is designed.Overall, it has 14 terminations.Multivibrator is capable of handling voltages up to 5V.This device has a clock input and a data input.The part has a total of 14 pins.This is a part of the LS family of computers.14 pins are included in the specification for the part.Using Surface Mount, the device is mounted to the surface.A quiescent current is consumed at 6mA by it.5V volts of voltage is required to run this chip.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 8mA.This device is capable of giving voltages up to 5V volts.2 is the total number of bits on an IC chip.RETRIGGERABLE is the part's additional features search field. SN74LS122D Featuresin 14-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS122 Supply Voltage: 5V Quiescent Current at 6mA output current at 8mA 2 bits SN74LS122D ApplicationsThere are a lot of Texas Instruments SN74LS122D applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD4047BMT OverviewThe product is packaged in a 14-SOIC (0.154, 3.90mm Width) case.In case of Tape & Reel (TR), you should pack the equipment.Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.Part Astable, Monostable includes logic type Astable, Monostable.There is a vote within 3V~18V.4000B series electric components include this component.A minimum operating temperature of -55°C~125°C must not be reached by this part.Compared to the voltage output, the current output of 6.8mA 6.8mA is low.CD4047 is the basis for the design of the component.As a result, it has a total of 14 terminations.Multivibrator can handle 5V voltage.Data or clock inputs are available on 2 inputs.14 pins are present on the part in total.In the part, there are 14 pins.Surface Mount mounts the device on top of the base.Multivibrator is necessary to have a higher minimum supply voltage than 3V.As a result, quiescent current is consumed at 20μA.12V volts is the chip's operating supply voltage.The output current that can be supplied to the device is 6.8mA.1 is the total amount of bits on an IC chip.You can search the additional features of the part: RETRIGGERABLEThere are 1 elements in it.Using 0.06mA is recommended for power supply current.Designed and packaged by TR. CD4047BMT Featuresin 14-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Astable, Monostable Operating Temperature: 4000B based on CD4047 Supply Voltage: 5V Quiescent Current at 20μA output current at 6.8mA 1 bits CD4047BMT ApplicationsThere are a lot of Texas Instruments CD4047BMT applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4538MT OverviewThe product comes in a 16-SOIC (0.154, 3.90mm Width) case.When packing equipment for Tape & Reel (TR), it is advisable to take it along with you.The recommended mounting type is Surface Mount.Part Monostable includes logic type Monostable.Votage is supplied within a period of time called 2V~6V.Multivibrator is one of the electrical components that is included in the 74HC series.A minimum operating temperature of -55°C~125°C must not be reached by this part.Multivibrator causes 5.2mA 5.2mA low,high output current.A 74HC4538-family component is used to design the component.There are a total of 16 terminations on it.Voltages in the 4.5V range can be handled.A data or clock input can be connected to it through the 2 input.There are a total of six 16 pins on the part.It belongs to HC/UH family.16 pins are included in the specification for the part.Surface Mount mounts the device on top of the base.The minimum supply voltage must be greater than 2V if the supply voltage is to exceed 2V.Integrated circuit consumes quiescent current at 8μA.To function properly, this chip requires a voltage supply of 5V volts.Chips like this one require 6V volts to run properly.Input current to the device is 5.2mA.An IC chip is made up of 2 bits in total.An element with 2 elements can be found in it.Using the 0.08mA setting would be best for power supply current.This part is packaged by a company called TR. CD74HC4538MT Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC4538MT ApplicationsThere are a lot of Texas Instruments CD74HC4538MT applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | 74LVC1G123DCTRG4 OverviewThere is a 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) case in which it is packaged.As a precaution, it is advisable to pack the equipment in case something goes wrong.The recommended mounting type for this product is Surface Mount.Part Monostable includes logic type Monostable.There is a vote within 1.65V~5.5V.Multivibrator is one of the electrical components that is included in the 74LVC series.During the operation of this part, the minimum operating temperature must not exceed -40°C~125°C degrees Celsius.Multivibrator causes 32mA 32mA low,high output current.Based on the 74LVC1G123 family, the component is designed.Specifications include 8 pins for the part.Surface Mount mounts the device on the wall.A quiescent current is consumed at 20μA by it.Specifically, 5V volts are the operating supply voltage.There are 1 elements in it. 74LVC1G123DCTRG4 Featuresin 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LVC based on 74LVC1G123 Quiescent Current at 20μA 74LVC1G123DCTRG4 ApplicationsThere are a lot of Texas Instruments 74LVC1G123DCTRG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC4538M96G4 OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).The recommended mounting type is Surface Mount.There is a Monostable included in the logic type of the part.The vote is delivered within the zone 2V~6V.This electrical component is included in the 74HC series.A minimum operating temperature of -55°C~125°C must not be reached by this part.A low current is output from the device 5.2mA 5.2mA, whereas a high voltage output is output from the device 5.2mA 5.2mA.A 74HC4538-family component is used to design the component.As a whole, it has 16 terminations.Voltages in the 4.5V range can be handled.A data or clock input can be connected to it through the 2 input.Part 16 has a total of four pins.This is a part of the HC/UH family of computers.In the part, there are 16 pins that are available for use.The device is mounted by Surface Mount.Integrated circuit is essential that the minimum supply voltage be greater than 2V in order to ensure that the supply voltage exceeds 2V.A quiescent current is consumed at 8μA by it.5V voltage is specified for the chip's operating supply.If you would like your chip to run properly, it requires a voltage supply of 6V volts to operate.A device such as this can deliver an output current of 5.2mA to the input current.IC chips have a total number of bits of 2, which is the total number of bits on the chip.A 2 element is present in it.There is a recommendation to run the power supply current under 0.08mA.Packaged by TR is the part. CD74HC4538M96G4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC4538M96G4 ApplicationsThere are a lot of Texas Instruments CD74HC4538M96G4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | 74LVC1G123DCURG4 OverviewIn this case, the product is packaged in a 8-VFSOP (0.091, 2.30mm Width) case.Pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.This part has Monostable as its logic type.There is a supply of votage within 1.65V~5.5V hours.A 74LVC series component includes this electrical component.Unless otherwise specified, this part must operate at no lower than -40°C~125°C degrees Celsius.32mA 32mA's current output is low and its voltage output is high.Designed based on the 74LVC1G123 family, the component features a number of features.In the part, there are 8 pins.Surface Mount mounts the device on top of the base.There is a quiescent current consumption at 20μA.There is a 5V volt specification for the chip's operating supply voltage.The element has 1 elements. 74LVC1G123DCURG4 Featuresin 8-VFSOP (0.091, 2.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LVC based on 74LVC1G123 Quiescent Current at 20μA 74LVC1G123DCURG4 ApplicationsThere are a lot of Texas Instruments 74LVC1G123DCURG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HCT423MTG4 OverviewIn this case, the product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).The recommended mounting type is Surface Mount.There is a logic type Monostable associated with the part.The vote is delivered within the zone 4.5V~5.5V.A 74HCT series component includes this electrical component.Unless otherwise specified, this part must operate at no lower than -55°C~125°C degrees Celsius.There is a small current output of 4mA 4mA while there is a large voltage output from 4mA 4mA.As far as the design is concerned, the component is based on the 74HCT423 family of components.Total 16 terminations are present.There is no problem with the device handling the 5V voltage.Data or clock inputs can be accessed via 2 inputs.There are a total of 16 16 pins on the part.This is a part of the HCT family of computers.In the part, there are 16 pins that are available for use.Surface Mount mounts the device on top of the base.There is a quiescent current consumption at 8μA.Specifically, 5V volts are the operating supply voltage.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 4mA.Integrated circuit can provide voltage up to 5V volts.There are 2 bits on an IC chip, and they total up to the total amount of bits.The part's additional features can be searched here: RETRIGGERABLEThe element consists of 2 elements.0.08mA is the recommended power supply current.Designed and packaged by TR. CD74HCT423MTG4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT423 Supply Voltage: 5V Quiescent Current at 8μA output current at 4mA 2 bits CD74HCT423MTG4 ApplicationsThere are a lot of Texas Instruments CD74HCT423MTG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | 74LVC1G123DCURE4 OverviewThere is a 8-VFSOP (0.091, 2.30mm Width) case in which it is packaged.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).The recommended mounting type for this product is Surface Mount.There is a logic type Monostable associated with the part.There is a supply of votage within 1.65V~5.5V hours.These electrical components can be found in the 74LVC series.The minimum operating temperature of this part must not be -40°C~125°C.In the case of 32mA 32mA, the current output is low, while the voltage output is high.74LVC1G123 is the basis for the design of the component.In the part, there are 8 pins.Surface Mount mounts the device on top of the base.20μA consumes quiescent current.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.1 elements are included in it. 74LVC1G123DCURE4 Featuresin 8-VFSOP (0.091, 2.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LVC based on 74LVC1G123 Quiescent Current at 20μA 74LVC1G123DCURE4 ApplicationsThere are a lot of Texas Instruments 74LVC1G123DCURE4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74AHC123ADGVRE4 Overview16-TFSOP (0.173, 4.40mm Width) cases contain the product.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.As part of the logic type, Monostable is included.Votage is provided within a specified period of time within 2V~5.5V.74AHC series electric components include this component.In order for this part to operate properly, the minimum operating temperature should not be -40°C~85°C.The output of 8mA 8mA is low in terms of current while it is high in terms of voltage.Based on the 74AHC123 family, the component is designed.There are a total of 16 terminations on it.The device is capable of handling voltages up to 3.3V.A data or clock input can be connected to it through the 2 input.There are a total of ten 16 pins on the part.The AHC/VHC/H/U/V family is what it belongs to.Parts of the part have 16 pins.Multivibrator is mounted by Surface Mount.Integrated circuit is essential that the minimum supply voltage be greater than 2V in order to ensure that the supply voltage exceeds 2V.In the state of quiescence, it consumes a lot of current at 4μA.5V volts is the chip's operating supply voltage.The output current that can be supplied to the device is 8mA.2 is the total number of bits on an IC chip.Integrated circuit contains 2 elements.Under 0.04mA, it is recommended to run the power supply current.Packaging is handled by TR. SN74AHC123ADGVRE4 Featuresin 16-TFSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHC based on 74AHC123 Supply Voltage: 3.3V Quiescent Current at 4μA output current at 8mA 2 bits SN74AHC123ADGVRE4 ApplicationsThere are a lot of Texas Instruments SN74AHC123ADGVRE4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | SN74LV123ARGYRG4 OverviewThe product is packaged in a 16-VFQFN Exposed Pad case.In case of Tape & Reel (TR), you should pack the equipment.Surface Mount is recommended for mounting.There is a Monostable included in the logic type of the part.We supply it within 2V~5.5V.These electrical components can be found in the 74LV series.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -40°C~125°C.There is a small current output of 12mA 12mA while there is a large voltage output from 12mA 12mA.Multivibrator is designed on the basis of the 74LV123 family of components.The total number of terminations of this device is 16.Multivibrator is possible for the device to handle the 2.5V voltage.It has 2 inputs for data or clock.16 pins are present on the part in total.The LV/LV-A/LVX/H family is what it belongs to.Multivibrator is possible to mount 16 pins on this part if you wish.Surface Mount mounts the device on the wall.Multivibrator is necessary to have a higher minimum supply voltage than 2V.During quiescent time, it consumes current at 20μA.5V volts of voltage is required to run this chip.The output current that can be supplied to the device is 12mA.There is a possibility of giving voltage at 3.3V volts using this device.IC chips have 2 bits total.2 elements are included in it.The part is packaged by TR. SN74LV123ARGYRG4 Featuresin 16-VFQFN Exposed Pad package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV123 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV123ARGYRG4 ApplicationsThere are a lot of Texas Instruments SN74LV123ARGYRG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HCT423M96G4 OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).The recommended mounting type for this product is Surface Mount.This part has Monostable as its logic type.Multivibrator is supplied votage wMultivibratorhin 4.5V~5.5V.Multivibrator is included in the 74HCT series of electrical components.Unless otherwise specified, this part must operate at no lower than -55°C~125°C degrees Celsius.Voltage output of 4mA 4mA exceeds current output.In this component, the 74HCT423 family is used as the basis for design.As a whole, it has 16 terminations.5V voltage can be handled by this device.Data or clock inputs are available on 2 inputs.There are a total of 16 16 pins on the part.It belongs to HCT family.Parts of the part have 16 pins.By mounting the device, Surface Mount provides a secure connection.As 8μA increases, it consumes more quiescent current.There is a 5V volt specification for the chip's operating supply voltage.There is a limit to how much current the device can supply in terms of output current.Integrated circuit can give voltage at 5V volts.2 is the total number of bits on an IC chip.Search the additional features of this part by typing RETRIGGERABLE into the search boxA 2 element is present in it.Using 0.08mA is recommended for power supply current.Parts are packaged by TR. CD74HCT423M96G4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT423 Supply Voltage: 5V Quiescent Current at 8μA output current at 4mA 2 bits CD74HCT423M96G4 ApplicationsThere are a lot of Texas Instruments CD74HCT423M96G4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
| Ultralife | CD74HC423M96G4 OverviewThe product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Pack the equipment in case of Tape & Reel (TR).The recommended mounting type for this product is Surface Mount.There are two logic types for this part, Logic Type A and Logic Type B.Multivibrator is provided in a quantMultivibratory of 2V~6V.Electrical components of this type are included in the 74HC series.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.Multivibrator causes 5.2mA 5.2mA low,high output current.This component has been designed based on the 74HC423 family of components.Total 16 terminations are present.The device is capable of handling voltages up to 4.5V.Data and clock inputs are provided through 2 inputs.There are a total of 16 16 pins on the part.There is a HC/UH family member.In the part, there are 16 pins.By mounting the device, Surface Mount provides a secure connection.The necessary minimum supply voltage ought to be greater than 2V.At 8μA, it consumes a small amount of quiescent current.There is a 5V volt specification for the chip's operating supply voltage.If you would like your chip to run properly, it requires a voltage supply of 6V volts to operate.A device such as this can deliver an output current of 5.2mA to the input current.In an IC chip, there are 2 bits.Additional features of the part can be found by searching: RETRIGGERABLEIntegrated circuit consists of 2 elements.Under 0.08mA, it is recommended to run the power supply current.TR is the company responsible for packaging the part. CD74HC423M96G4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC423 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC423M96G4 ApplicationsThere are a lot of Texas Instruments CD74HC423M96G4 applications of multivibrators.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
