Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Ultralife | 74LVC1G123DCTTG4 OverviewThere is a 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) case packaging.If Tape & Reel (TR) happens, pack the equipment accordingly.The recommended mounting type is Surface Mount.Part Monostable includes logic type Monostable.There is a vote within 1.65V~5.5V.74LVC series electric components include this component.Multivibrator is not permMultivibratorted to operate this part below -40°C~125°C°F.Despite the high voltage output, 32mA 32mA outputs a low current.Multivibrator is designed on the basis of the 74LVC1G123 family of components.In this part, you can find 8 pins.In this case, the device is mounted by Surface Mount.A quiescent current is consumed at 20μA by it.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.1 elements are included in it.With this device, it is possible to supply currents up to 20μA in maximum. 74LVC1G123DCTTG4 Featuresin 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LVC based on 74LVC1G123 Quiescent Current at 20μA 74LVC1G123DCTTG4 ApplicationsThere are a lot of Texas Instruments 74LVC1G123DCTTG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HC221PWT OverviewThere is a 16-TSSOP (0.173, 4.40mm Width) case in which it is packaged.Keeping equipment packed in case of Tape & Reel (TR) is a good idea.Surface Mount mounting is recommended.This part has Monostable as its logic type.The vote is delivered within the zone 2V~6V.Multivibrator is one of the electrical components that is included in the 74HC series.In order for this part to operate properly, the minimum operating temperature should not be -55°C~125°C.Multivibrator causes 5.2mA 5.2mA low,high output current.In this component, the 74HC221 family is used as the basis for design.As a result, it has a total of 16 terminations.Multivibrator is capable of handling voltages up to 4.5V.This device has a clock input and a data input.There are a total of ten 16 pins on the part.It belongs to HC/UH family.In the part, there are 16 pins that are available for use.As shown in the picture, Surface Mount is mounting the device.Integrated circuit is essential that the minimum supply voltage be greater than 2V in order to ensure that the supply voltage exceeds 2V.A quiescent current is consumed at 8μA by it.There is a 5V volt specification for the chip's operating supply voltage.As a result, this chip needs a voltage supply of 6V volts for it to work properly.Integrated circuit is possible to supply the device wIntegrated Circuith an output current that is equal to 5.2mA.2 is the total number of bits on an IC chip.2 elements are included in it.Integrated circuit is recommended that the power supply current run under 0.08mA.Parts are packaged by TR. CD74HC221PWT Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Supply Voltage: 4.5V Quiescent Current at 8μA output current at 5.2mA 2 bits CD74HC221PWT ApplicationsThere are a lot of Texas Instruments CD74HC221PWT applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LV221ADG4 OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case packaging.Multivibrator is recommended that you pack the equipment in case of Tube.Multivibrator recommended mounting type is Surface Mount.A part's logic type includes Monostable as part of its logic.The vote is delivered within the zone 2V~5.5V.The 74LV series include this electrical component.A minimum operating temperature of -40°C~85°C must not be reached by this part.In the case of 12mA 12mA, the current output is low, while the voltage output is high.As far as the design is concerned, the component is based on the 74LV221 family of components.Total 16 terminations are present.You can use it with 2.5V voltage.Data or clock inputs are available on 2 inputs.Multivibrator consists of a total of five 16 pins on the part.A member of the LV/LV-A/LVX/H family, it has a number of characteristics.In the part, there are 16 pins.The device is mounted by Surface Mount.The minimum supply voltage must be greater than 2V in order to ensure that the supply voltage exceeds 2V.20μA consumes quiescent current.To function properly, this chip requires a voltage supply of 5V volts.A device can be supplied with a current of output named 12mA if the output voltage is set appropriately.IC chips have 2 bits total.Integrated circuit consists of 2 elements. SN74LV221ADG4 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV221 Supply Voltage: 2.5V Quiescent Current at 20μA output current at 12mA 2 bits SN74LV221ADG4 ApplicationsThere are a lot of Texas Instruments SN74LV221ADG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | 74HCT423N,112 OverviewThe product is packaged in a 16-DIP (0.300, 7.62mm) case.If Tube happens, pack the equipment accordingly.Multivibrator is recommended that you use a Through Hole mounting type for Multivibrator.As part of the logic type, Monostable is included.Votage is provided within a specified period of time within 4.5V~5.5V.These electrical components can be found in the 74HCT series.Unless otherwise specified, this part must operate at no lower than -40°C~125°C degrees Celsius.The output of 4mA 4mA is low in terms of current while it is high in terms of voltage.The component is designed based on the 74HCT423 family.Total 16 terminations are present.5V voltage can be handled by this device.There are 2 inputs for data and clock.16 pins are present on the part in total.There is a HCT family member.Multivibrator is necessary to have a higher minimum supply voltage than 4.5V.In order for this chip to function correctly, it is required a voltage supply of 5.5V volts.This device is capable of giving voltages up to 5V volts.Using the search bar, you can find the additional features of the part: RETRIGGERABLE.As far as the electronic component is concerned, it belongs to the Prescaler/Multivibrators family. 74HCT423N,112 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT423 Supply Voltage: 5V 74HCT423N,112 ApplicationsThere are a lot of NXP USA Inc. 74HCT423N,112 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | 74HCT123N,652 Overview16-DIP (0.300, 7.62mm) cases package it.Multivibrator is recommended that you pack the equipment in case of Tube.Mounting type Through Hole is the recommended one for this device.Part Monostable includes logic type Monostable.Multivibrator is supplied votage wMultivibratorhin 4.5V~5.5V.74HCT series electric components include this component.A minimum operating temperature of -40°C~125°C must not be reached by this part.A low current is output from the device 4mA 4mA, whereas a high voltage output is output from the device 4mA 4mA.Designed based on the 74HCT123 family, the component features a number of features.The total number of terminations of this device is 16.Multivibrator is capable of handling voltages up to 5V.This device has a clock input and a data input.16 pins are located on the part in total.The HCT family is responsible for it.The minimum supply voltage must be greater than 4.5V in order to ensure that the supply voltage exceeds 4.5V.Integrated circuit is required for this chip to be supplied wIntegrated Circuith a voltage supply of 5.5V volts in order to operate properly.There is a possibility that it can provide voltage at a voltage level of 5V volts.Integrated circuit is possible to search the addIntegrated circuitional features of the part using the following search terms: RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOThis electronic part belongs to the Prescaler/Multivibrators family. 74HCT123N,652 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT123 Supply Voltage: 5V 74HCT123N,652 ApplicationsThere are a lot of NXP USA Inc. 74HCT123N,652 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | HEF4538BP,652 OverviewIn this case, the product is packaged in a 16-DIP (0.300, 7.62mm) case.The equipment should be packed in case of Tube, so that it can be used in an emergency.Through Hole is recommended for mounting.Part Monostable includes logic type Monostable.We supply it within 3V~15V.Electrical components of this type are included in the 4000B series.In order for this part to operate properly, the minimum operating temperature should not be -40°C~125°C.The output of 3.4mA 3.4mA is low in terms of current while it is high in terms of voltage.In this component, the 4538 family is used as the basis for design.Overall, it has 16 terminations.There is no problem with the device handling the 5V voltage.Data or clock inputs are available on 2 inputs.Multivibrator has a total of six 16 pins.Multivibrator is a member of the 4000/14000/40000 family.The minimum supply voltage must be greater than 3V in order to ensure that the supply voltage exceeds 3V.Integrated circuit is required for this chip to be supplied wIntegrated Circuith a voltage supply of 15V volts in order to operate properly.Depending on the voltage, it can provide voltage in the range of 5/15V volts.A family of Prescaler/Multivibrators electronic parts makes up the electronic part. HEF4538BP,652 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 4000B based on 4538 Supply Voltage: 5V HEF4538BP,652 ApplicationsThere are a lot of NXP USA Inc. HEF4538BP,652 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HC4538QPWRQ1 OverviewIn this case, the product is packaged in a 16-TSSOP (0.173, 4.40mm Width) case.Keeping equipment packed in case of Tape & Reel (TR) is a good idea.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.There are two logic types for this part, Logic Type A and Logic Type B.Multivibrator is provided in a quantMultivibratory of 2V~6V.This electrical component is included in the Automotive, AEC-Q100, 74HC series.During the operation of this part, the minimum operating temperature must not exceed -40°C~125°C degrees Celsius.A low current is output from the device 5.2mA 5.2mA, whereas a high voltage output is output from the device 5.2mA 5.2mA.A component based on the 74HC4538 family is designed.Multivibrator has 16 terminations in total.Multivibrator is possible for the device to handle the 4.5V voltage.It has 2 inputs for data or clock.Multivibrator has a total of six 16 pins.A member of the HC/UH family, it has a number of characteristics.The part includes 16 pins.Surface Mount is used to mount the device.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.There is a quiescent current consumption at 8μA.There is a 5V volt specification for the chip's operating supply voltage.In order for this chip to perform correctly, it needs a voltage supply of 6V volts.IC chips have a total number of bits of 2, which is the total number of bits on the chip.In this case, it contains 2 elements.The power supply current is suggested to run under 0.08mA.This part is packaged by a company called TR. CD74HC4538QPWRQ1 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: Automotive, AEC-Q100, 74HC based on 74HC4538 Supply Voltage: 4.5V Quiescent Current at 8μA 2 bits CD74HC4538QPWRQ1 ApplicationsThere are a lot of Texas Instruments CD74HC4538QPWRQ1 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M74HC123B1R OverviewA 16-DIP (0.300, 7.62mm) case holds the product.Keeping equipment packed in case of Tube is a good idea.Through Hole is recommended for mounting.The logic type of the part includes Monostable.We supply it within 2V~6V.These electrical components can be found in the 74HC series.A minimum operating temperature of -55°C~125°C must not be reached by this part.Compared to the voltage output, the current output of 5.2mA 5.2mA is low.In this component, the M74HC123 family is used as the basis for design.There are a total of 16 terminations on it.Multivibrator can handle 4.5V voltage.There is a 2 input for data or a clock input on this board.The part has a total of 16 pins.The product belongs to the family of HC/UH products.16 pins are available on the part.Through Hole mounts the device on top of the base.Supply voltages must be higher than 2V to meet the minimum requirement.4μA consumes quiescent current.The operating supply voltage for the chip is specified as 5V volts.The chip runs properly with a voltage supply of 6V volts.The output current that can be supplied to the device is 5.2mA.Additional features of the part can be found by searching: RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOThe element consists of 2 components.As long as you supply it with a maximum current of 4μA, it will be able to function properly. M74HC123B1R Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HC based on M74HC123 Supply Voltage: 4.5V Quiescent Current at 4μA output current at 5.2mA M74HC123B1R ApplicationsThere are a lot of STMicroelectronics M74HC123B1R applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | 74HC221D,652 OverviewIn this case, the product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Pack the equipment in case of Tube.You should mount it with a Surface Mount type.There are two logic types for this part, Logic Type A and Logic Type B.Votage is supplied within a period of time called 2V~6V.Multivibrator is included in the 74HC series of electrical components.There must not be a minimum operating temperature of -40°C~125°C for this part.Multivibrator causes 5.2mA 5.2mA low,high output current.A 74HC221-family component is used to design the component.Total 16 terminations are present.There is no problem handling voltages up to 5V.A data or clock input can be connected to it through the 2 input.16 pins are present on the part in total.The HC/UH family is responsible for it.The minimum supply voltage must be greater than 2V in order to ensure that the supply voltage exceeds 2V.Integrated circuit is required for this chip to be supplied wIntegrated Circuith a voltage supply of 6V volts in order to operate properly.Here is a search engine you can use to search for additional features of the part: NON-RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOElectronic parts of this product are part of the Prescaler/Multivibrators series. 74HC221D,652 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Supply Voltage: 5V 74HC221D,652 ApplicationsThere are a lot of NXP USA Inc. 74HC221D,652 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | 74HC221DB,118 OverviewMultivibrator is packaged in 16-SSOP (0.209, 5.30mm Width) case.Pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.Part Monostable includes logic type Monostable.We supply it within 2V~6V.The 74HC series include this electrical component.The minimum operating temperature of this part must not be -40°C~125°C.In the case of 5.2mA 5.2mA, the current output is low, while the voltage output is high.A component based on the 74HC221 family is designed.As a result, it has a total of 16 terminations.Multivibrator is possible for the device to handle the 5V voltage.There are 2 inputs for data and clock.Multivibrator consists of a total of five 16 pins on the part.Multivibrator is a member of the HC/UH family.Minimum supply voltage must be greater than 2V for the supply voltage to be greater than 2V.The chip runs properly with a voltage supply of 6V volts.Search the additional features of this part by typing NON-RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSO into the search boxThis electronic part belongs to the Prescaler/Multivibrators family. 74HC221DB,118 Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Supply Voltage: 5V 74HC221DB,118 ApplicationsThere are a lot of NXP USA Inc. 74HC221DB,118 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | HCF4538M013TR Overview16-SOIC (0.154, 3.90mm Width) cases package it.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.As part of the logic type, Monostable is included.Voting is provided within the stipulated timeframe.There is an electrical component in the 4000 series.Multivibrator is not permMultivibratorted to operate this part below -55°C~125°C°F.Multivibrator is observed that the current output of 6.8mA 6.8mA is low, while the voltage output of 6.8mA 6.8mA is high.HCF4538 is the basis for the design of the component.As a result, it has a total of 16 terminations.You can use it with 5V voltage.The device has a 2 input for clocks or data.Multivibrator has a total of six 16 pins.Parts of the part have 16 pins.The device is mounted by Surface Mount.Minimum supply voltage should be greater than 3V.At 100μA, it consumes a small amount of quiescent current.Its operating supply voltage is 12V volts.The output current that can be supplied to the device is 6.8mA.Depending on the voltage, it can provide voltage in the range of 5/15V volts.RETRIGGERABLE is the part's additional features search field.There are 2 elements in it. HCF4538M013TR Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 4000 based on HCF4538 Supply Voltage: 5V Quiescent Current at 100μA output current at 6.8mA HCF4538M013TR ApplicationsThere are a lot of STMicroelectronics HCF4538M013TR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | 74HCT221N,112 OverviewThere is a 16-DIP (0.300, 7.62mm) case packaging.The equipment should be packed in case of Tube, so that it can be used in an emergency.Multivibrator is recommended that you use a Through Hole mounting type for Multivibrator.There is a Monostable included in the logic type of the part.There is a supply of votage within 4.5V~5.5V hours.There is an electrical component in the 74HCT series.Multivibrator is recommended that this part does not operate at a minimum temperature of -40°C~125°C.A low current is output from the device 4mA 4mA, whereas a high voltage output is output from the device 4mA 4mA.The component is designed based on the 74HCT221 family. 74HCT221N,112 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT221 74HCT221N,112 ApplicationsThere are a lot of NXP USA Inc. 74HCT221N,112 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LS123DBR OverviewA 16-SSOP (0.209, 5.30mm Width) case holds the product.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).The recommended mounting type for this product is Surface Mount.The logic type of the part includes the letter Monostable in its name.Votage is supplied within a period of time called 4.75V~5.25V.There is an electrical component in the 74LS series.There is a minimum operating temperature that cannot be exceeded by this part.A low current is output from the device 400μA 8mA, whereas a high voltage output is output from the device 400μA 8mA.This component has been designed based on the 74LS123 family of components.There are a total of 16 terminations on it.Multivibrator can handle 5V voltage.There are 2 inputs for data and clock.The family LS is represented by it.16 pins are included in the specification for the part.The minimum supply voltage must be greater than 4.75V in order to ensure that the supply voltage exceeds 4.75V.Here is a search engine you can use to search for additional features of the part: RETRIGGERABLE SN74LS123DBR Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LS based on 74LS123 Supply Voltage: 5V SN74LS123DBR ApplicationsThere are a lot of Texas Instruments SN74LS123DBR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | HCF4047M013TR OverviewMultivibrator is packaged in 14-SOIC (0.154, 3.90mm Width) case.If Tape & Reel (TR) happens, pack the equipment accordingly.The recommended mounting type is Surface Mount.There is a Astable, Monostable included in the logic type of the part.We supply it within 3V~20V.There is an electrical component in the 4000 series.Multivibrator is not permMultivibratorted to operate this part below -55°C~125°C°F.Multivibrator is observed that the current output of 6.8mA 6.8mA is low, while the voltage output of 6.8mA 6.8mA is high.Multivibrator is designed on the basis of the HCF4047 family of components.Overall, it has 14 terminations.The device is capable of handling voltages up to 5V.This device has a clock input and a data input.Multivibrator consists of a total of five 14 pins on the part.There are 14 pins available in the part.Surface Mount mounts the device on the wall.A quiescent current is consumed at 20μA by it.12V volts is the operating supply voltage for the chip.Integrated circuit is possible for the device to output a current of 6.8mA as an output current.This part also has the following extra features that you may be interested in: RETRIGGERABLE; FREE RUNNING/GATABLE ASTABLE OPERATING MODES WITH OSCILLATOR OUTPUTIn this case, it contains 1 elements.A maximum supply current of 20μA can be handled by this device. HCF4047M013TR Featuresin 14-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Astable, Monostable Operating Temperature: 4000 based on HCF4047 Supply Voltage: 5V Quiescent Current at 20μA output current at 6.8mA HCF4047M013TR ApplicationsThere are a lot of STMicroelectronics HCF4047M013TR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | HCF4047BEY OverviewMultivibrator is packaged in 14-DIP (0.300, 7.62mm) case.Multivibrator is advised to pack the equipment in case of Tube.Multivibrator is recommended that you use a Through Hole mounting type for Multivibrator.Part Astable, Monostable includes logic type Astable, Monostable.There is a vote within 3V~20V.There is an electrical component included in the 4000B series.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.The output of 6.8mA 6.8mA is low in terms of current while it is high in terms of voltage.Designed based on the HCF4047 family, the component features a number of features.The total number of terminations is 14.There is no problem with the device handling the 5V voltage.It has 2 inputs for data or clock.There are a total of ten 14 pins on the part.In this part, you can find 14 pins.Through Hole mounts the device on top of the base.During quiescent time, it consumes current at 20μA.The operating supply voltage for the chip is specified as 12V volts.There is a limit on the amount of output current that can be provided to the device, which is called 6.8mA.Additional features of the part can be found by searching: RETRIGGERABLE; FREE RUNNING/GATABLE ASTABLE OPERATING MODES WITH OSCILLATOR OUTPUTThe element has 1 elements.An input current of 20μA is the maximum it can handle. HCF4047BEY Featuresin 14-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Astable, Monostable Operating Temperature: 4000B based on HCF4047 Supply Voltage: 5V Quiescent Current at 20μA output current at 6.8mA HCF4047BEY ApplicationsThere are a lot of STMicroelectronics HCF4047BEY applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | 74HCT221DB,112 OverviewPackaged in a 16-SSOP (0.209, 5.30mm Width) case, it comes with a guarantee.When packing equipment for Tube, it is advisable to take it along with you.Mounting type Surface Mount is the recommended one for this device.As part of the logic type, Monostable is included.There is a supply of votage within 4.5V~5.5V hours.The 74HCT series include this electrical component.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -40°C~125°C.Voltage output of 4mA 4mA exceeds current output.In this component, the 74HCT221 family is used as the basis for design.The total number of terminations of this device is 16.There is no problem with the device handling the 5V voltage.It has 2 inputs for data or clock.16 pins are located on the part in total.It belongs to HCT family.Supply voltages must be higher than 4.5V to meet the minimum requirement.To function properly, this chip requires a voltage supply of 5.5V volts in order to operate.There is a possibility that it can provide voltage at a voltage level of 5V volts.You can search the additional features of the part: NON-RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOThere is an electronic part in the Prescaler/Multivibrators family. 74HCT221DB,112 Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT221 Supply Voltage: 5V 74HCT221DB,112 ApplicationsThere are a lot of NXP USA Inc. 74HCT221DB,112 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M74HC4538B1R OverviewThere is a 16-DIP (0.300, 7.62mm) case packaging.In case of Tube, you should pack the equipment.Mounting type Through Hole is the recommended one for this device.As part of the logic type, Monostable is included.There is a supply of votage within 2V~6V hours.Electrical components of this type are included in the 74HC series.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.Voltage output of 5.2mA 5.2mA exceeds current output.In this component, the M74HC45 family is used as the basis for design.As a result, it has a total of 16 terminations.There is no problem handling voltages up to 4.5V.A data or clock input can be connected to it through the 2 input.16 pins are located on the part in total.HC/UH family is the family that it belongs to.16 pins are included in the specification for the part.By mounting the device, Through Hole provides a secure connection.Minimum supply voltage must be greater than 2V in order for the supply voltage to exceed 2V.As a result, quiescent current is consumed at 4μA.Integrated circuit is specified that the operating supply voltage for the chip is 5V volts.If you would like your chip to run properly, it requires a voltage supply of 6V volts to operate.Input current to the device is 5.2mA.RETRIGGERABLE is the part's additional features search field.Integrated circuit consists of 2 elements.There is a maximum current that the device can handle of 4μA amps. M74HC4538B1R Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HC based on M74HC45 Supply Voltage: 4.5V Quiescent Current at 4μA output current at 5.2mA M74HC4538B1R ApplicationsThere are a lot of STMicroelectronics M74HC4538B1R applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | HCF4538BEY OverviewA 16-DIP (0.300, 7.62mm) case holds the product.Multivibrator is recommended that you pack the equipment in case of Tube.The recommended mounting type is Through Hole.The logic type of the part includes Monostable.We supply it within 3V~20V.Multivibrator is one of the electrical components that is included in the 4000B series.Multivibrator is not permMultivibratorted to operate this part below -55°C~125°C°F.There is a small current output of 6.8mA 6.8mA while there is a large voltage output from 6.8mA 6.8mA.A component based on the HCF4538 family is designed.There are a total of 16 terminations on it.There is no problem handling voltages up to 5V.It has 2 inputs for data or clock.Multivibrator has a total of six 16 pins.The family 4000/14000/40000 is represented by it.Specifications include 16 pins for the part.The device is mounted by Through Hole.Integrated circuit is essential that the minimum supply voltage be greater than 3V in order to ensure that the supply voltage exceeds 3V.During quiescent time, it consumes current at 100μA.12V volts is the operating supply voltage for the chip.An output current of 6.8mA can be supplied to a device to provide an output current to the device.This device is capable of giving voltages up to 5/15V volts.Here is a search engine you can use to search for additional features of the part: RETRIGGERABLEA 2 element is present in it.Depending on the model, the maximum supply current can be 100μA. HCF4538BEY Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 4000B based on HCF4538 Supply Voltage: 5V Quiescent Current at 100μA output current at 6.8mA HCF4538BEY ApplicationsThere are a lot of STMicroelectronics HCF4538BEY applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M74HC4538RM13TR Overview16-SOIC (0.154, 3.90mm Width) cases package it.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).Multivibrator recommended mounting type is Surface Mount.There is a Monostable included in the logic type of the part.Voting is provided within the stipulated timeframe.Multivibrator is one of the electrical components that is included in the 74HC series.The minimum operating temperature of this part must not be -55°C~125°C.Compared to the voltage output, the current output of 5.2mA 5.2mA is low.This component has been designed based on the M74HC45 family of components.The total number of terminations of this device is 16.Multivibrator is capable of handling voltages up to 4.5V.It has 2 inputs for data or clock.The part has a total of 16 pins.Multivibrator is a member of the HC/UH family.Parts of the part have 16 pins.Surface Mount mounts the device on the wall.The necessary minimum supply voltage ought to be greater than 2V.At 4μA, it consumes a quiescent current that is consumed by it.5V volts of voltage is required to run this chip.In order for this chip to function correctly, it is required a voltage supply of 6V volts.There is a limit to how much current the device can supply in terms of output current.This part also has the following extra features that you may be interested in: RETRIGGERABLE2 elements are included in it.A maximum supply current of 4μA can be handled by this device. M74HC4538RM13TR Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on M74HC45 Supply Voltage: 4.5V Quiescent Current at 4μA output current at 5.2mA M74HC4538RM13TR ApplicationsThere are a lot of STMicroelectronics M74HC4538RM13TR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | 74HC221N,652 OverviewThere is a 16-DIP (0.300, 7.62mm) case packaging.As a precaution, it is advisable to pack the equipment in case something goes wrong.You should mount it with a Through Hole type.This part has Monostable as its logic type.Votage is provided within a specified period of time within 2V~6V.A 74HC series component includes this electrical component.There must not be a minimum operating temperature of -40°C~125°C for this part.A low current is output from the device 5.2mA 5.2mA, whereas a high voltage output is output from the device 5.2mA 5.2mA.In this component, the 74HC221 family is used as the basis for design.As a whole, it has 16 terminations.The device is capable of handling voltages up to 5V.It has 2 inputs for data or clock.There are a total of ten 16 pins on the part.The product belongs to the family of HC/UH products.Minimum supply voltage should be greater than 2V.In order for this chip to function correctly, it is required a voltage supply of 6V volts.Here is a search engine you can use to search for additional features of the part: NON-RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOPrescaler/Multivibrators-family electronic parts are used in this part. 74HC221N,652 Featuresin 16-DIP (0.300, 7.62mm) package Mounting Type: Through Hole Logic Type: Monostable Operating Temperature: 74HC based on 74HC221 Supply Voltage: 5V 74HC221N,652 ApplicationsThere are a lot of NXP USA Inc. 74HC221N,652 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HC4538QM96Q1 OverviewThe product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.In case of Tape & Reel (TR), you should pack the equipment.Surface Mount mounting is recommended.The logic type of the part includes Monostable.Votage is provided within a specified period of time within 2V~6V.The Automotive, AEC-Q100, 74HC series include this electrical component.Multivibrator is crMultivibratorical that this part's minimum operating temperature does not reach -40°C~125°C.Multivibrator causes 5.2mA 5.2mA low,high output current.A component based on the 74HC4538 family is designed.As a result, it has a total of 16 terminations.Voltages in the 4.5V range can be handled.Data and clock inputs are provided through 2 inputs.16 pins are located on the part in total.The HC/UH family is responsible for it.In this part, you can find 16 pins.By mounting the device, Surface Mount provides a secure connection.Minimum supply voltage should be greater than 2V.5V volts of voltage is required to run this chip.If you would like your chip to run properly, it requires a voltage supply of 6V volts to operate.The output current that can be supplied to the device is 5.2mA. CD74HC4538QM96Q1 Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: Automotive, AEC-Q100, 74HC based on 74HC4538 Supply Voltage: 4.5V output current at 5.2mA CD74HC4538QM96Q1 ApplicationsThere are a lot of Texas Instruments CD74HC4538QM96Q1 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74121NSR OverviewThe product comes in a 14-SOIC (0.209, 5.30mm Width) case.Multivibrator is advised to pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.There is a logic type Monostable associated with the part.Votage is supplied within a period of time called 4.75V~5.25V.This electrical component is included in the 7400 series.During the operation of this part, the minimum operating temperature must not exceed 0°C~70°C degrees Celsius.400μA 16mA's current output is low and its voltage output is high.Designed based on the SN74121 family, the component features a number of features.Multivibrator has 14 terminations in total.Multivibrator can handle 5V voltage.Data or clock inputs can be accessed via 3 inputs.There are a total of 16 14 pins on the part.Parts of the part have 14 pins.Surface Mount is used to mount the device.5V volts of voltage is required to run this chip.Voltage can be provided at 5V volts by this device. SN74121NSR Featuresin 14-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 7400 based on SN74121 Supply Voltage: 5V SN74121NSR ApplicationsThere are a lot of Texas Instruments SN74121NSR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Klein Tools, Inc. | M74HC4538TTR OverviewPackaged in a 16-TSSOP (0.173, 4.40mm Width) case, it comes with a guarantee.As a precaution, it is advisable to pack the equipment in case something goes wrong.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.Part Monostable includes logic type Monostable.The vote is delivered within the zone 2V~6V.74HC series electric components include this component.Multivibrator is not permMultivibratorted to operate this part below -55°C~125°C°F.There is a small current output of 5.2mA 5.2mA while there is a large voltage output from 5.2mA 5.2mA.A component based on the M74HC45 family is designed.Multivibrator has 16 terminations in total.4.5V voltage can be handled by it.There are 2 inputs for data and clock.Part 16 has a total of four pins.The family HC/UH is represented by it.Multivibrator is possible to mount 16 pins on this part if you wish.Multivibrator is mounted by Surface Mount.Minimum supply voltage should be greater than 2V.At 4μA, it consumes a quiescent current that is consumed by it.Specifically, 5V volts are the operating supply voltage.In order for this chip to perform correctly, it needs a voltage supply of 6V volts.Listed below are the additional features for the part: RETRIGGERABLEThere is a maximum current that the device can handle of 4μA amps. M74HC4538TTR Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HC based on M74HC45 Supply Voltage: 4.5V Quiescent Current at 4μA M74HC4538TTR ApplicationsThere are a lot of STMicroelectronics M74HC4538TTR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74121NSRG4 Overview14-SOIC (0.209, 5.30mm Width) cases package it.If Tape & Reel (TR) happens, pack the equipment accordingly.Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.As part of the logic type, Monostable is included.Voting is provided within the stipulated timeframe.This electrical component is included in the 7400 series.Multivibrator is not permMultivibratorted to operate this part below 0°C~70°C°F.Multivibrator is observed that the current output of 400μA 16mA is low, while the voltage output of 400μA 16mA is high.Multivibrator is designed on the basis of the SN74121 family of components.14 terminations are present in total.You can use it with 5V voltage.This device has a clock input and a data input.Multivibrator consists of a total of five 14 pins on the part.14 pins are available on the part.By mounting the device, Surface Mount provides a secure connection.There is a 5V volt specification for the chip's operating supply voltage.There is a possibility that it can provide voltage at a voltage level of 5V volts. SN74121NSRG4 Featuresin 14-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 7400 based on SN74121 Supply Voltage: 5V SN74121NSRG4 ApplicationsThere are a lot of Texas Instruments SN74121NSRG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74AHC123APWRE4 OverviewA 16-TSSOP (0.173, 4.40mm Width) case holds the product.Keeping equipment packed in case of Tape & Reel (TR) is a good idea.The recommended mounting type is Surface Mount.There is a logic type Monostable associated with the part.During the period of 2V~5.5V, it is supplied with the required amount of votes.Multivibrator is one of the electrical components that is included in the 74AHC series.Multivibrator is recommended that this part does not operate at a minimum temperature of -40°C~85°C.8mA 8mA's current output is low and its voltage output is high.Multivibrator is designed on the basis of the 74AHC123 family of components.As a result, it has a total of 16 terminations.There is no problem with the device handling the 3.3V voltage.It has 2 inputs for data or clock.As a whole, there are ten 16 pins on this part.It belongs to AHC/VHC/H/U/V family.The part includes 16 pins.As shown in the picture, Surface Mount is mounting the device.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.Integrated circuit consumes quiescent current at 4μA.Specifically, 5V volts are the operating supply voltage.An output current of 8mA can be supplied to a device to provide an output current to the device.You can search the additional features of the part: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTSIntegrated circuit consists of 2 elements. SN74AHC123APWRE4 Featuresin 16-TSSOP (0.173, 4.40mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74AHC based on 74AHC123 Supply Voltage: 3.3V Quiescent Current at 4μA output current at 8mA SN74AHC123APWRE4 ApplicationsThere are a lot of Texas Instruments SN74AHC123APWRE4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC1G123YEPR OverviewThere is a 8-VFSOP (0.091, 2.30mm Width) case in which it is packaged.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).The recommended mounting type for this product is Surface Mount.There is a Monostable included in the logic type of the part.We supply it within 1.65V~5.5V.Multivibrator is one of the electrical components that is included in the 74LVC series.A minimum operating temperature of -40°C~85°C must not be reached by this part.In the case of 32mA 32mA, the current output is low, while the voltage output is high.This component has been designed based on the 74LVC1G123 family of components.As a result, it has a total of 8 terminations.Multivibrator can handle 1.8V voltage.The device has a 2 input for clocks or data.Multivibrator consists of a total of five 8 pins on the part.LVC/LCX/Z family is the family that it belongs to.In the part, there are 8 pins that are available for use.The device is mounted by Surface Mount.The chip runs properly with a voltage supply of 5.5V volts.This electronic part is a member of the Prescaler/Multivibrators family. SN74LVC1G123YEPR Featuresin 8-VFSOP (0.091, 2.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LVC based on 74LVC1G123 Supply Voltage: 1.8V SN74LVC1G123YEPR ApplicationsThere are a lot of Texas Instruments SN74LVC1G123YEPR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LV221ADBR OverviewA 16-SSOP (0.209, 5.30mm Width) case holds the product.As a precaution, it is advisable to pack the equipment in case something goes wrong.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.There is a logic type Monostable associated with the part.Votage is supplied within a period of time called 2V~5.5V.74LV series electric components include this component.There is a minimum operating temperature that cannot be exceeded by this part.Multivibrator causes 12mA 12mA low,high output current.The component is designed based on the 74LV221 family.The total number of terminations of this device is 16.Multivibrator is capable of handling voltages up to 2.5V.It has 2 inputs for data or clock.There are a total of ten 16 pins on the part.Multivibrator is a member of the LV/LV-A/LVX/H family.In the part, there are 16 pins.Surface Mount is used to mount the device.The necessary minimum supply voltage ought to be greater than 2V.This part's maximum supply voltage (Vsup) should not exceed 5.5V volts.There is a possibility that it can provide voltage at a voltage level of 3.3V volts. SN74LV221ADBR Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV221 Supply Voltage: 2.5V SN74LV221ADBR ApplicationsThere are a lot of Texas Instruments SN74LV221ADBR applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
MG Chemicals | 74HCT123D/AUJ OverviewThere is a 16-SOIC (0.154, 3.90mm Width) case in which it is packaged.In case of Tape & Reel (TR), you should pack the equipment.Multivibrator is recommended to mount Multivibrator in a Surface Mount-posMultivibratorion.The logic type of the part includes the letter Monostable in its name.We supply it within 4.5V~5.5V.These electrical components can be found in the 74HCT series.During the operation of this part, the minimum operating temperature must not exceed -40°C~125°C degrees Celsius.The output of 4mA 4mA is low in terms of current while it is high in terms of voltage.As far as the design is concerned, the component is based on the 74HCT123 family of components. 74HCT123D/AUJ Featuresin 16-SOIC (0.154, 3.90mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74HCT based on 74HCT123 74HCT123D/AUJ ApplicationsThere are a lot of NXP USA Inc. 74HCT123D/AUJ applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LV221ADBRG4 OverviewIn this case, the product is packaged in a 16-SSOP (0.209, 5.30mm Width) case.The equipment should be packed in case of Tape & Reel (TR), so that it can be used in an emergency.Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.Part Monostable includes logic type Monostable.The vote is delivered within the zone 2V~5.5V.The 74LV series include this electrical component.There must not be a minimum operating temperature of -40°C~85°C for this part.A low current is output from the device 12mA 12mA, whereas a high voltage output is output from the device 12mA 12mA.Designed based on the 74LV221 family, the component features a number of features.Overall, it has 16 terminations.There is no problem with the device handling the 2.5V voltage.There are 2 inputs for data and clock.Multivibrator consists of a total of five 16 pins on the part.The LV/LV-A/LVX/H family is what it belongs to.In the part, there are 16 pins that are available for use.As shown in the picture, Surface Mount is mounting the device.The minimum supply voltage must be greater than 2V in order to ensure that the supply voltage exceeds 2V.To function properly, this chip requires a voltage supply of 5.5V volts in order to operate. SN74LV221ADBRG4 Featuresin 16-SSOP (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 74LV based on 74LV221 Supply Voltage: 2.5V SN74LV221ADBRG4 ApplicationsThere are a lot of Texas Instruments SN74LV221ADBRG4 applications of multivibrators.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74121NSRE4 Overview14-SOIC (0.209, 5.30mm Width) cases package it.Pack the equipment in case of Tape & Reel (TR).Multivibrator recommended mounting type is Surface Mount.There is a Monostable included in the logic type of the part.During the period of 4.75V~5.25V, it is supplied with the required amount of votes.A 7400 series component includes this electrical component.In order for this part to operate properly, the minimum operating temperature should not be 0°C~70°C.400μA 16mA's current output is low and its voltage output is high.The component is designed based on the SN74121 family.The total number of terminations of this device is 14.5V voltage can be handled by it.The device has a 3 input for clocks or data.14 pins are present on the part in total.In this part, you can find 14 pins.There is a Surface Mount which mounts the device.A minimum supply voltage greater than 4.75V is required to ensure that the supply voltage is greater than 4.75V.The voltage that it can output can be as high as 5V volts. SN74121NSRE4 Featuresin 14-SOIC (0.209, 5.30mm Width) package Mounting Type: Surface Mount Logic Type: Monostable Operating Temperature: 7400 based on SN74121 Supply Voltage: 5V SN74121NSRE4 ApplicationsThere are a lot of Texas Instruments SN74121NSRE4 applications of multivibrators.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.