My CartParticle, Dust Sensors(3401)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| NXP Semiconductors | MCZ33903DP5EK Overview32-SSOP (0.295, 7.50mm Width) Exposed Padis an appropriate package for this device.The package contains a Tube case.The component has been installed according to the Surface Mountmethod.System Basis Chipapplies to this component.The device is capable of supplying 5.5V~28V volts.In total, there are 32terminations.This device should be set to 10.5V.A voltage of 125°Cpowers the potentiometer.Designed to work at a minimum temperature of -40°C°C, the component must operate at this temperature.In this device, POWER SUPPLY MANAGEMENT CIRCUITis the analog IC.1channels are available on the device. MCZ33903DP5EK FeaturesSet the part at 10.5V volts Other Analog IC Type : POWER SUPPLY MANAGEMENT CIRCUIT MCZ33903DP5EK ApplicationsThere are a lot of NXP USA Inc. MCZ33903DP5EK Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | MC33889BPEGR2 OverviewThe 28-SOIC (0.295, 7.50mm Width)package fits the device well.A Tape & Reel (TR)case is provided with it.The component is installed in the way indicated by Surface Mount.System Basis Chipapplies the component appropriately.The ability to supply 5V volts is available with certain devices.Based on the [0], it is possible to locate related parts.It has 28terminations.It is important to remember that this device should be set to 13.5V.There are electronic components in the Network Interfaces family.A voltage of 125°Cpowers the potentiometer.The device can deliver voltage at 5.5/18V volts.Temperatures below -40°Care recommended for the component.There is a telecom IC type of INTERFACE CIRCUITin the device. MC33889BPEGR2 FeaturesIt is based on MC33889. Set the part at 13.5V volts Telecom IC Type : INTERFACE CIRCUIT MC33889BPEGR2 ApplicationsThere are a lot of NXP USA Inc. MC33889BPEGR2 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | MC33889DPEG OverviewThe 28-SOIC (0.295, 7.50mm Width)package is a good fit for this feature.The item is packaged in a Tube case.The component has been installed according to the Surface Mountmethod.It is appropriate for the component applied in Automotive.The device is capable of supplying voltages of 5.5V~18V volts.It is possible to find related parts based on the MC33889.There are 28 terminations on it.You should set this device to 13.5V.The electronic components belong to the Network Interfaces family.A voltage of 125°Cpowers the potentiometer.Voltage at 5.5/18Vcan be delivered by the device.Designed to work at a minimum temperature of -40°C°C, the component must operate at this temperature.IC type INTERFACE CIRCUITis used in the device. MC33889DPEG FeaturesIt is based on MC33889. Set the part at 13.5V volts Telecom IC Type : INTERFACE CIRCUIT MC33889DPEG ApplicationsThere are a lot of NXP USA Inc. MC33889DPEG Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | MCZ33905DD3EK OverviewThis fits well into the 54-SSOP (0.295, 7.50mm Width) Exposed Pad package.The package contains a Tube case.In the way of [0], this component is installed.In this case, it is appropriate for the component applied in System Basis Chip.It is possible to find devices that supply 5.5V~28V volts.The number of terminations is 54.Make sure this device is set to 10.5V.Potentiometers operate at a supply voltage of 125°C.The component was designed to operate at a minimum temperature of -40°C.POWER SUPPLY MANAGEMENT CIRCUIT is the analog IC that this device employs.There are 1 channels on the device. MCZ33905DD3EK FeaturesSet the part at 10.5V volts Other Analog IC Type : POWER SUPPLY MANAGEMENT CIRCUIT MCZ33905DD3EK ApplicationsThere are a lot of NXP USA Inc. MCZ33905DD3EK Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | MCZ33905DD5EK OverviewIt fits well with the package [0].It is packaged in a Tube case.In this case, this component is installed in accordance with Surface Mount.System Basis Chipis appropriate for this component.An output voltage of 5.5V~28V volts can be provided by the device.It contains 54terminations.You should set this device to 10.5V.A voltage of 125°Cpowers the potentiometer.A temperature of -40°C is the minimum operating temperature for the component.This device makes use of an analog integrated circuit (IC) [0].It has a total of 1channels. MCZ33905DD5EK FeaturesSet the part at 10.5V volts Other Analog IC Type : POWER SUPPLY MANAGEMENT CIRCUIT MCZ33905DD5EK ApplicationsThere are a lot of NXP USA Inc. MCZ33905DD5EK Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | MCZ33905DS3EK OverviewIt's a good fit for the 32-SSOP (0.295, 7.50mm Width) Exposed Pad package.It comes in a case with a [0].In the way of [0], this component is installed.In this case, it is appropriate for the component applied in System Basis Chip.The device is capable of supplying 5.5V~28V volts.It consists of 32terminations.It is important to keep in mind that this device should be set to 10.5V.Potentiometers operate at a supply voltage of 125°C.Designed to work at a minimum temperature of -40°C°C, the component must operate at this temperature.The analog IC employed by this device is [0].1channels are available on the device. MCZ33905DS3EK FeaturesSet the part at 10.5V volts Other Analog IC Type : POWER SUPPLY MANAGEMENT CIRCUIT MCZ33905DS3EK ApplicationsThere are a lot of NXP USA Inc. MCZ33905DS3EK Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | MCZ33903DD3EK OverviewThe 32-SSOP (0.295, 7.50mm Width) Exposed Padpackage would be a good match for it.There is a Tubecase included with it.The component is installed in the way indicated by Surface Mount.System Basis Chipapplies the component appropriately.It is possible to find devices that supply 5.5V~28V volts.It consists of 32terminations.Make sure this device is set to 10.5V.Potentiometers conduct at supply voltages of 125°C.The component is designed to work at a minimum temperature of -40°C.In this device, the analog IC POWER SUPPLY MANAGEMENT CIRCUITis used.It has a total of 1channels. MCZ33903DD3EK FeaturesSet the part at 10.5V volts Other Analog IC Type : POWER SUPPLY MANAGEMENT CIRCUIT MCZ33903DD3EK ApplicationsThere are a lot of NXP USA Inc. MCZ33903DD3EK Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | MC33989PEG OverviewThis fits nicely with the 28-SOIC (0.295, 7.50mm Width) package.It is packaged in a Tube case.Surface Mountis the way in which this component is installed.This component is suitable for the application in Automotive.A device capable of providing 5.5V~18V volts is available.By using the [0], it is possible to find parts that are related.It contains 28terminations.Make sure that this device is set to 13.5V.Electronic components of the Network Interfacesfamily are used.When the supply voltage is [0], the potentiometer conducts.At [0], it is capable of delivering voltage.At a minimum temperature of [0], the component is designed to perform.In this device, the telecom IC type is INTERFACE CIRCUIT. MC33989PEG FeaturesIt is based on MC33989. Set the part at 13.5V volts Telecom IC Type : INTERFACE CIRCUIT MC33989PEG ApplicationsThere are a lot of NXP USA Inc. MC33989PEG Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TUSB212IRWBT OverviewThe 12-XFQFNpackage is a good fit for it.The item is packaged in a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.The component applied in Signal Processingis appropriate.The device is capable of supplying 3V~3.6V volts.The TUSB212can be used to find related parts.The termination count on it is [0].Be sure to set the device to 3.3V.There are a total of 12 pins on it.For optimum reliability, it operates at a temperature of [0].In order to maintain consistency, a maximum value of 85°Cis recommended.There are 1 channels available on the device.IC type TELECOM CIRCUITis used in the device. TUSB212IRWBT FeaturesIt is based on TUSB212. Set the part at 3.3V volts Telecom IC Type : TELECOM CIRCUIT TUSB212IRWBT ApplicationsThere are a lot of Texas Instruments TUSB212IRWBT Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | IP4776CZ38,118 OverviewThe 38-TFSOP (0.173, 4.40mm Width)package would be a good match for it.The item is packaged in a Tape & Reel (TR) case.Surface Mountis the way in which this component is installed.Digital TV, Displays, Digital KVM, Graphics Processingis appropriate for this component.The device is capable of supplying 3.3V 5V volts.Based on the [0], it is possible to locate related parts.It has 38terminations.This device should be set to 3.3V.Operation is performed via the 38pins.When a supply voltage of 85°Cis applied to the potentiometer, it conducts.At a minimum temperature of [0], the component is designed to perform. IP4776CZ38,118 FeaturesIt is based on IP4776. Set the part at 3.3V volts IP4776CZ38,118 ApplicationsThere are a lot of NXP USA Inc. IP4776CZ38,118 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCA9518D,118 OverviewThe 20-SOIC (0.295, 7.50mm Width)package is a good fit for it.The item is packaged in a Tape & Reel (TR) case.This component is installed in the way of Surface Mount.In this case, it is appropriate for the component applied in Buffer.A device capable of providing 3V~3.6V volts is available.On the basis of the [0], it is possible to find related parts.The termination count on it is [0].It is recommended that you set this device to 3.3V.Operation is performed via the 20pins.Potentiometers conduct at supply voltages of 85°C.It is designed to function at a minimum temperature of -40°C°C. PCA9518D,118 FeaturesIt is based on PCA9518. Set the part at 3.3V volts PCA9518D,118 ApplicationsThere are a lot of NXP USA Inc. PCA9518D,118 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCA9541D/01,112 OverviewThis fits nicely with the 16-SOIC (0.154, 3.90mm Width) package.It comes in a case with a [0].Surface Mountis used to install this component.This is appropriate for the component that is applied in 2-Channel I2C MultiplexerThere is the potential for the device to supply 2.3V~5.5V volts.The PCA9541can be used to find related parts.The termination count on it is [0].It is important to keep in mind that this device should be set to 2.5V.In order to operate, we use the 16pins.This electronic component belongs to the family of [0].The potentiometer conducts in a supply voltage of 85°C.There are MICROPROCESSOR CIRCUIT uPs/uCs/Peripheral ICs integrated into this device.It is capable of delivering voltage at 2.5/5V.The component is designed to work at a minimum temperature of -40°C. PCA9541D/01,112 FeaturesIt is based on PCA9541. Set the part at 2.5V volts MICROPROCESSOR CIRCUIT of uPs/uCs/Peripheral ICs Type PCA9541D/01,112 ApplicationsThere are a lot of NXP USA Inc. PCA9541D/01,112 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CF581MTD/NOPB OverviewIt is appropriate for the device to use the 56-TFSOP (0.240, 6.10mm Width)package.There is a Tubecase included with it.This component is installed in the way of Surface Mount.A device capable of providing 4.5V~5.5V volts is available.Based on the [0], related parts can be found.It consists of 56terminations.It is important to note that this device should be set to 5V.There are a total of 56 pins on it.Operation is performed through the 56pins.It is mounted on Surface Mount.The device operates at a minimum working temperature of -10°C in order to ensure its reliability.It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.Line Driver or Receiversis the family of electronic components.An interface IC operates with a supply voltage of 5V.Voltage at 5Vcan be delivered by the device.In this part, the interface IC type is classified as LINE DRIVER.Embedded on the part are 4 drivers. DS90CF581MTD/NOPB FeaturesIt is based on DS90CF581. Set the part at 5V volts Interface IC Type : LINE DRIVER with 4 Drivers DS90CF581MTD/NOPB ApplicationsThere are a lot of Texas Instruments DS90CF581MTD/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR211MTD Overview48-TFSOP (0.240, 6.10mm Width)is an appropriate package for this device.A case of Tubeis provided.It is installed according to Surface Mount.It is capable of supplying a voltage of 4.5V~5.5V.The DS90CR211can be used to find related parts.In total, it consists of 48pins.By [0], it is mounted.A minimum working temperature of -10°Cis required to ensure the reliability of the device.When the value is set to [0], the part will run consistently.An interface IC operates with a supply voltage of 5V.This part is classified as a LINE DRIVERinterface IC.Embedded on the part are 3 drivers. DS90CR211MTD FeaturesIt is based on DS90CR211. Interface IC Type : LINE DRIVER with 3 Drivers DS90CR211MTD ApplicationsThere are a lot of Texas Instruments DS90CR211MTD Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CF562MTD/NOPB Overview48-TFSOP (0.240, 6.10mm Width)is an appropriate package for this device.The item is packaged in a Tube case.This component is installed in the way of Surface Mount.There is the potential for the device to supply 4.5V~5.5V volts.On the basis of the [0], it is possible to find related parts.A total of 48terminations have been recorded.It is important to keep in mind that this device should be set to 5V.It has a total of 48pins.In order for the operation to be performed, the 48pins must be connected.The unit is mounted on Surface Mount.A minimum working temperature of -10°Cis required to ensure the reliability of the unit.In order to maintain consistency, a maximum value of 70°Cis recommended.Electronic components are of the Line Driver or Receiversfamily.In the interface IC, the supply voltage is set to 5V.As a result, it is capable of delivering voltage at 5V.This part uses interface IC type LINE RECEIVER.There are 21 drivers embedded in the part. DS90CF562MTD/NOPB FeaturesIt is based on DS90CF562. Set the part at 5V volts Interface IC Type : LINE RECEIVER with 21 Drivers DS90CF562MTD/NOPB ApplicationsThere are a lot of Texas Instruments DS90CF562MTD/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CF583MTD/NOPB OverviewIt fits well with the package [0].This product comes in a Tube case.In the way of [0], this component is installed.The ability to supply 4.75V~5.25V volts is available with certain devices.On the basis of the [0], it is possible to find related parts.A total of 56terminations have been recorded.Make sure this device is set to 5V.It contains a total of 56 pins.A device's operation is controlled by the 56pins.Surface Mountmounts it.As a result, the device operates at a minimum working temperature of -10°Cto ensure its reliability.When 70°Cis the maximum value, the part will run consistently.Electronic components of the Line Driver or Receiversfamily are used.Interface ICs operate at a voltage level of 5V volts.Voltage can be delivered at 5V.This part uses interface IC type LINE DRIVER.The part is embedded with 4 drivers. DS90CF583MTD/NOPB FeaturesIt is based on DS90CF583. Set the part at 5V volts Interface IC Type : LINE DRIVER with 4 Drivers DS90CF583MTD/NOPB ApplicationsThere are a lot of Texas Instruments DS90CF583MTD/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR288MTD OverviewThe 56-TFSOP (0.240, 6.10mm Width)package fits the device well.It comes in a case with a [0].There is no installation of this component in the way of Surface Mount.Devices that are capable of supplying 3V~3.6Vvolts may be used.A DS90CR288can be used to identify related parts.A total of 56terminations have been recorded.It is important to keep in mind that this device should be set to 3.3V.56 pins are used for operation.The unit is mounted on Surface Mount.When the supply voltage is [0], the potentiometer conducts.A temperature of -10°C is the minimum operating temperature for the component.There is a LINE RECEIVERinterface IC type for this part. DS90CR288MTD FeaturesIt is based on DS90CR288. Set the part at 3.3V volts Interface IC Type : LINE RECEIVER DS90CR288MTD ApplicationsThere are a lot of Texas Instruments DS90CR288MTD Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR281MTD OverviewThe 56-TFSOP (0.240, 6.10mm Width)package fits the device well.A case of Tubeis provided.The component is installed in the way indicated by Surface Mount.The device is capable of supplying 4.5V~5.5V volts.The DS90CR281can be used to find related parts.The mount is Surface Mount.There is a LINE DRIVERinterface IC type for this part. DS90CR281MTD FeaturesIt is based on DS90CR281. Interface IC Type : LINE DRIVER DS90CR281MTD ApplicationsThere are a lot of Texas Instruments DS90CR281MTD Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR284MTD/NOPB OverviewIt fits well with the package [0].There is a Tubecase included with it.The component is installed according to Surface Mount.The ability to supply 4.75V~5.25V volts is available with certain devices.By using the [0], it is possible to find parts that are related.The number of terminations is 56.It is important to remember that this device should be set to 5V.In total, there are 56pins on the board.A device's operation is controlled by the 56pins.This is mounted by Surface Mount.The device must operate at a minimum working temperature of -10°Cin order to be reliable.In addition to ensuring the consistency of the part, 70°Cis the maximum value possible.The electronic components belong to the Line Driver or Receivers family.An interface IC operates with a supply voltage of 5V.As far as voltage delivery is concerned, it is capable of delivering voltage at 5V.In this part, the interface IC type is classified as LINE RECEIVER.This part is embedded with 28 drivers. DS90CR284MTD/NOPB FeaturesIt is based on DS90CR284. Set the part at 5V volts Interface IC Type : LINE RECEIVER with 28 Drivers DS90CR284MTD/NOPB ApplicationsThere are a lot of Texas Instruments DS90CR284MTD/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR218MTD/NOPB OverviewThis fits nicely with the 48-TFSOP (0.240, 6.10mm Width) package.It comes in a Tube case.Surface Mountis used to install this component.The device is capable of supplying 3V~3.6V volts.A DS90CR218can be used to identify related parts.There are 48 terminations on it.Be sure to set the device to 3.3V.Operation is carried out using the 48pins.By [0], it is mounted.There are electronic components in the Line Driver or Receivers family.A voltage of 70°Cpowers the potentiometer.As a result, it is capable of delivering voltage at 3.3V.The component was designed to operate at a minimum temperature of -10°C.Interface ICs for this part are categorized as LINE RECEIVER. DS90CR218MTD/NOPB FeaturesIt is based on DS90CR218. Set the part at 3.3V volts Interface IC Type : LINE RECEIVER DS90CR218MTD/NOPB ApplicationsThere are a lot of Texas Instruments DS90CR218MTD/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DP83850CVF Overview132-BQFP Bumperedis an appropriate package for this device.It is packaged in a Tray case.The component is installed in the way indicated by Surface Mount.There is the potential for the device to supply 4.75V~5.25V volts.By using the [0], it is possible to find parts that are related.In total, there are 132terminations.It is recommended that you set this device to 5V.132pins are on it in total.In order to operate, we use the 132pins.By [0], it is mounted.When a supply voltage of 70°Cis applied to the potentiometer, it conducts.The output frequency should not exceed 25MHzfor optimal performance.In the interface IC, there are 12 serial inputs or outputs. DP83850CVF FeaturesIt is based on DP83850. Set the part at 5V volts Number of Serial I/Os : 12 DP83850CVF ApplicationsThere are a lot of Texas Instruments DP83850CVF Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CF363MTDX OverviewThis fits nicely with the 48-TFSOP (0.240, 6.10mm Width) package.It is packaged in a Tape & Reel (TR) case.The component is installed according to Surface Mount.The device is capable of supplying voltages of 3V~3.6V volts.A DS90CF363can be used to identify related parts.It consists of 48terminations.Make sure that this device is set to 3.3V.The mount is Surface Mount.The electronic components belong to the Line Driver or Receivers family.The potentiometer conducts in a supply voltage of 85°C.Voltage at 3.3Vcan be delivered by the device.It is designed to function at a minimum temperature of -40°C°C.There is a LINE DRIVERinterface IC type for this part. DS90CF363MTDX FeaturesIt is based on DS90CF363. Set the part at 3.3V volts Interface IC Type : LINE DRIVER DS90CF363MTDX ApplicationsThere are a lot of Texas Instruments DS90CF363MTDX Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CF384ASLC OverviewIt's a good fit for the 64-LFBGA package.A case of Tubeis provided.In the way of [0], this component is installed.The device is capable of supplying voltages of 3V~3.6V volts.On the basis of the [0], it is possible to find related parts.The number of terminations is 64.This device should be set to 3.3V.In total, it consists of 64pins.By [0], it is mounted.Electronic components are of the Line Driver or Receiversfamily.A voltage of 70°Cpowers the potentiometer.The device can deliver voltage at 3.3V.At a minimum temperature of [0], the component is designed to perform.The interface IC type of this part are classified as LINE RECEIVER. DS90CF384ASLC FeaturesIt is based on DS90CF384. Set the part at 3.3V volts Interface IC Type : LINE RECEIVER DS90CF384ASLC ApplicationsThere are a lot of Texas Instruments DS90CF384ASLC Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR212MTDX OverviewIt fits well with the package [0].It is packaged in a Tape & Reel (TR) case.Surface Mountis used to install this component.A device capable of providing 4.5V~5.5V volts is available.Using the DS90CR212you can find related parts.The terminations on it are [0].Make sure this device is set to 5V.This is mounted by Surface Mount.Electronic components in this system belong to the Line Driver or Receivers family.With a supply voltage of [0], the potentiometer conducts.It is capable of delivering voltage at 5V.It is designed to function at a minimum temperature of -10°C°C.The interface IC type of this part are classified as LINE RECEIVER. DS90CR212MTDX FeaturesIt is based on DS90CR212. Set the part at 5V volts Interface IC Type : LINE RECEIVER DS90CR212MTDX ApplicationsThere are a lot of Texas Instruments DS90CR212MTDX Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DP83950BVQB OverviewThis fits well into the 160-BFQFP package.A case of Trayis provided.The component is installed in the way indicated by Surface Mount.A device capable of providing 4.75V~5.25V volts is available.Based on the [0], it is possible to locate related parts.The terminations on it are [0].Be sure to set the device to 5V.It has a total of 160pins.Operation is carried out using the 160pins.It is mounted on Surface Mount.Potentiometers conduct at 70°C volts.Devices using the telecom IC type TELECOM CIRCUITare used. DP83950BVQB FeaturesIt is based on DP83950. Set the part at 5V volts Telecom IC Type : TELECOM CIRCUIT DP83950BVQB ApplicationsThere are a lot of Texas Instruments DP83950BVQB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | PCI2050PDV OverviewIt is appropriate for the device to use the 208-LQFPpackage.The package contains a Tray case.Surface Mountis the way in which this component is installed.PCI-to-PCI Bridgeapplies the component appropriately.It is possible to obtain devices that supply 3V~3.6V volts.Based on the [0], related parts can be found.It has 208terminations.It is important to remember that this device should be set to 3.3V.A total of 208pins are located on it.In order for the operation to be performed, the 208pins must be connected.Currently, Surface Mountis mounting it.A minimum working temperature of 0°Cis required to ensure the reliability of the device.It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.Electronic components from the family Bus Controllersare used.In the interface IC, the supply voltage is set to 3.3V.As a result, it is capable of delivering voltage at 3.33.3/5V.At a maximum frequency of [0], the part can be run. PCI2050PDV FeaturesIt is based on PCI2050. Set the part at 3.3V volts PCI2050PDV ApplicationsThere are a lot of Texas Instruments PCI2050PDV Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CF581MTDX/NOPB OverviewThe 56-TFSOP (0.240, 6.10mm Width)package is a good fit for it.It comes in a Tape & Reel (TR) case.The component has been installed according to the Surface Mountmethod.It is capable of supplying a voltage of 4.5V~5.5V.Using the DS90CF581you can find related parts.The terminations on it are [0].It is important to remember that this device should be set to 5V.By [0], it is mounted.There are electronic components in the Line Driver or Receivers family.The potentiometer conducts in a supply voltage of 70°C.Voltage can be delivered at 5V.Components are designed to operate at a minimum temperature of -10°C°C.LINE DRIVERis the type of interface IC for this part. DS90CF581MTDX/NOPB FeaturesIt is based on DS90CF581. Set the part at 5V volts Interface IC Type : LINE DRIVER DS90CF581MTDX/NOPB ApplicationsThere are a lot of Texas Instruments DS90CF581MTDX/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CS4103VHG OverviewThis fits well into the 80-LQFP package.A Traycase is provided with it.Surface Mountis the way in which this component is installed.There is the potential for the device to supply 3V~3.6V volts.The CS4103can be used to locate related parts.There are 80 terminations on it.Make sure that this device is set to 3.3V.Currently, Surface Mountis mounting it.Electronic components are of the Bus Controllersfamily.Potentiometers conduct at 70°C volts.There are SERIAL IO/COMMUNICATION CONTROLLER, SERIAL uPs/uCs/Peripheral ICs integrated into this device.It is capable of delivering voltage at 3.3V degrees Celsius.This device should not have an output frequency greater than 24.576MHz for optimal performance.It has 3serial I/Os. CS4103VHG FeaturesIt is based on CS4103. Set the part at 3.3V volts SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type Number of Serial I/Os : 3 CS4103VHG ApplicationsThere are a lot of Texas Instruments CS4103VHG Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR283MTDX/NOPB OverviewThe 56-TFSOP (0.240, 6.10mm Width)package fits the device well.There is a Tape & Reel (TR)case included with it.In this case, this component is installed in accordance with Surface Mount.It is capable of supplying a voltage of 4.75V~5.25V.By using the [0], it is possible to find parts that are related.The terminations on it are [0].Make sure this device is set to 5V.It contains a total of 56 pins.In order to operate, we use the 56pins.By [0], it is mounted.It operates at a minimum working temperature of -10°C to ensure reliability.The maximum value of 70°C assures that the part runs consistently.Electronic components in this system belong to the Line Driver or Receivers family.Interface ICs operate at a voltage level of 5V volts.It is capable of delivering voltage at 5V.A LINE DRIVERtype interface IC is used in this part.As part of the package, it is embedded with 4drivers. DS90CR283MTDX/NOPB FeaturesIt is based on DS90CR283. Set the part at 5V volts Interface IC Type : LINE DRIVER with 4 Drivers DS90CR283MTDX/NOPB ApplicationsThere are a lot of Texas Instruments DS90CR283MTDX/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR561MTDX OverviewIt's a good fit for the 48-TFSOP (0.240, 6.10mm Width) package.The item is packaged in a Tape & Reel (TR) case.In this case, this component is installed in accordance with Surface Mount.It is capable of supplying a voltage of 4.5V~5.5V.On the basis of the [0], it is possible to find related parts.It contains 48terminations.Be sure to set the device to 5V.The unit is mounted on Surface Mount.Electronic components of the Line Driver or Receiversfamily are used.When the supply voltage is set to [0], the potentiometer conducts.The device can deliver voltage at 5V volts.It is designed to function at a minimum temperature of -10°C°C.Interface ICs for this part are categorized as LINE DRIVER. DS90CR561MTDX FeaturesIt is based on DS90CR561. Set the part at 5V volts Interface IC Type : LINE DRIVER DS90CR561MTDX ApplicationsThere are a lot of Texas Instruments DS90CR561MTDX Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
