My CartParticle, Dust Sensors(3401)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Microchip Technology | MD0105K6-G-M932 OverviewThe 18-VFDFN Exposed Padpackage fits the device well.The package contains a Tape & Reel (TR) case.The component is installed according to Surface Mount.It is appropriate for the component applied in High Voltage.The MD0105can be used to find related parts.The termination count on it is [0].It contains a total of 18 pins.The device is mounted by Surface Mount.As a result, the device operates at a minimum working temperature of -40°Cto ensure its reliability.The maximum value of 125°C assures that the part runs consistently.TELECOM CIRCUITis the type of IC used in the device. MD0105K6-G-M932 FeaturesIt is based on MD0105. Telecom IC Type : TELECOM CIRCUIT MD0105K6-G-M932 ApplicationsThere are a lot of Microchip Technology MD0105K6-G-M932 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | L9678-S OverviewThe 64-LQFPpackage would be a good match for it.This product comes in a Tray case.Surface Mountis used to install this component.Automotiveapplies to this component.Based on the [0], it is possible to locate related parts.The termination count on it is [0].The device operates at a minimum working temperature of -40°C in order to ensure its reliability.This value enables the part to run consistently with a maximum value of [0].Electronic parts in the Automotive, AEC-Q100series are included in this part.CONSUMER CIRCUIT identifies the type of consumer IC for the part. L9678-S FeaturesIt is based on L9678. L9678-S ApplicationsThere are a lot of STMicroelectronics L9678-S Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | L9678TR-S OverviewThe 64-LQFPpackage fits the device well.It comes in a case with a [0].In the way of [0], this component is installed.Automotiveapplies the component appropriately.Based on the [0], related parts can be found.The device has a total of 64pins.Currently, Surface Mountis mounting it.The device must operate at a minimum working temperature of -40°Cin order to be reliable.By setting the value of 95°Cto the maximum, this ensures that the part will run consistently.An electronic part of the series Automotive, AEC-Q100is being used in this application. L9678TR-S FeaturesIt is based on L9678. L9678TR-S ApplicationsThere are a lot of STMicroelectronics L9678TR-S Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CF386SLCX/NOPB OverviewThis fits nicely with the 64-LFBGA package.It comes in a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.It is possible to find devices that supply 3V~3.6V volts.Using the DS90CF386you can find related parts.There are 64 terminations on it.Keep in mind that this device should be set to 3.3V.In total, there are 64pins on the board.For operation, 64pins are used.It is mounted on Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.The interface IC conducts at a voltage of 3.3V.As part of the package, it is embedded with 28drivers. DS90CF386SLCX/NOPB FeaturesIt is based on DS90CF386. Set the part at 3.3V volts with 28 Drivers DS90CF386SLCX/NOPB ApplicationsThere are a lot of Texas Instruments DS90CF386SLCX/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR218AMTDX/NOPB OverviewThe 48-TFSOP (0.240, 6.10mm Width)package is a good fit for this feature.This product comes in a Tape & Reel (TR) case.The component has been installed according to the Surface Mountmethod.The device is capable of supplying voltages of 3V~3.6V volts.A DS90CR218can be used to identify related parts.This termination has 48terminations.It is recommended that you set this device to 3.3V.There are a total of 48 pins on the device.In order to operate, we use the 48pins.In this case, it is mounted by Surface Mount.The device must operate at a minimum working temperature of -10°Cin order to be reliable.In addition to ensuring the consistency of the part, 70°Cis the maximum value possible.Electronic components of the Line Driver or Receiversfamily are used.ICs used in interfaces are operated at a supply voltage of 3.3V.There is a LINE RECEIVERinterface IC type for this part.The part is embedded with 21 drivers. DS90CR218AMTDX/NOPB FeaturesIt is based on DS90CR218. Set the part at 3.3V volts Interface IC Type : LINE RECEIVER with 21 Drivers DS90CR218AMTDX/NOPB ApplicationsThere are a lot of Texas Instruments DS90CR218AMTDX/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TUSB217RGYTQ1 OverviewIt is appropriate for the device to use the 14-VFQFN Exposed Padpackage.It comes in a Tape & Reel (TR) case.In this case, this component is installed in accordance with Surface Mount.This component is suitable for the application in USB.It is possible to find devices that supply 2.3V~6.5V volts.By using the [0], it is possible to find parts that are related.It contains 14terminations.It is recommended that you set this device to 5V.Potentiometers operate at a supply voltage of 105°C.In this device, there is BUS CONTROLLER, UNIVERSAL SERIAL BUS uPs/uCs/peripheral IC.The electronic part is a member of the Automotive, AEC-Q100 series.Temperatures below -40°Care recommended for the component. TUSB217RGYTQ1 FeaturesIt is based on TUSB217. Set the part at 5V volts BUS CONTROLLER, UNIVERSAL SERIAL BUS of uPs/uCs/Peripheral ICs Type TUSB217RGYTQ1 ApplicationsThere are a lot of Texas Instruments TUSB217RGYTQ1 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR216MTDX OverviewThe 48-TFSOP (0.240, 6.10mm Width)package is a good fit for this feature.The package contains a Tape & Reel (TR) case.The component is installed according to Surface Mount.It is possible to find devices that supply 3V~3.6V volts.The DS90CR216can be used to find related parts.A total of 48terminations have been recorded.It is important to note that this device should be set to 3.3V.It contains a total of 48 pins.Operation is carried out using the 48pins.The device is mounted by Surface Mount.It operates at a minimum working temperature of -40°C to ensure reliability.The maximum value of 85°C assures that the part runs consistently.Electronic components from the family Line Driver or Receiversare used.ICs used in interfaces are operated at a supply voltage of 3.3V.There is a LINE RECEIVERinterface IC type for this part.The part is embedded with 21 drivers. DS90CR216MTDX FeaturesIt is based on DS90CR216. Set the part at 3.3V volts Interface IC Type : LINE RECEIVER with 21 Drivers DS90CR216MTDX ApplicationsThere are a lot of Texas Instruments DS90CR216MTDX Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TUSB215QRGYTQ1 Overview14-VFQFN Exposed Padis an appropriate package for this device.It is packaged in a Tape & Reel (TR) case.This component is installed in the way of Surface Mount.Signal Processingapplies it to the appropriate component.The device is capable of supplying voltages of 4.4V~5.5V volts.By using the [0], it is possible to find parts that are related.This termination has 14terminations.This device should be set to 5V.A total of 14pins are located on it.For optimum reliability, it operates at a temperature of [0].Keeping 105°Cas the maximum value will ensure consistency.This device supports BUS CONTROLLER, UNIVERSAL SERIAL BUSuPs/uCs/peripheral ICs.The electronic part in question belongs to the Automotive, AEC-Q100 series.Currently, the device has 1channels. TUSB215QRGYTQ1 FeaturesIt is based on TUSB215. Set the part at 5V volts BUS CONTROLLER, UNIVERSAL SERIAL BUS of uPs/uCs/Peripheral ICs Type TUSB215QRGYTQ1 ApplicationsThere are a lot of Texas Instruments TUSB215QRGYTQ1 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TMDS341APFCG4 OverviewThe 80-TQFPpackage is a good fit for it.This product comes in a Tray case.It is installed according to Surface Mount.3:1 Switchable DVI/HDMI Receiverapplies the component appropriately.The ability to supply 3V~3.6V volts is available with certain devices.By using the [0], it is possible to find parts that are related.In total, there are 80terminations.It is important to note that this device should be set to 3.3V.It contains a total of 80 pins.Operation is carried out through the 80pins.It is mounted by Surface Mount.It is designed to work at a minimum working temperature of 0°C to ensure reliability.In addition to ensuring the consistency of the part, 70°Cis the maximum value possible.An interface IC operates at a supply voltage of 3.6V.A digital IC AUDIO/VIDEO SWITCHis employed in this device.There are 4 channels on the device. TMDS341APFCG4 FeaturesIt is based on TMDS341. Set the part at 3.3V volts Other Analog IC Type : AUDIO/VIDEO SWITCH TMDS341APFCG4 ApplicationsThere are a lot of Texas Instruments TMDS341APFCG4 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | OPA4872IDG4 OverviewThe 14-SOIC (0.154, 3.90mm Width)package would be a good match for it.The package contains a Tube case.In this case, this component is installed in accordance with Surface Mount.In this case, it is appropriate for the component applied in Multiplexer with Amplifier.The ability to supply ±3.5V~6V volts is available with certain devices.Using the OPA4872you can find related parts.There are 14 terminations on it.Keep in mind that this device should be set to 5V.It has a total of 14pins.In order for the operation to be performed, the 14pins must be connected.The mount is Surface Mount.The device operates at a minimum working temperature of -40°C in order to ensure its reliability.It is imperative that the maximum value of 85°Cis maintained in order to ensure continued operation.The electronic components belong to the Multiplexer or Switches family.An interface IC operates with a supply voltage of 12V.In this device, the analog IC SINGLE-ENDED MULTIPLEXERis used.In this device, there are 1channels.There are 4 inputs to operate. OPA4872IDG4 FeaturesIt is based on OPA4872. Set the part at 5V volts Other Analog IC Type : SINGLE-ENDED MULTIPLEXER OPA4872IDG4 ApplicationsThere are a lot of Texas Instruments OPA4872IDG4 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90C363BMT OverviewIt is appropriate for the device to use the 48-TFSOP (0.240, 6.10mm Width)package.It comes in a case with a [0].Surface Mountis the way in which this component is installed.The device is capable of supplying 3V~3.6V volts.The DS90C363can be used to locate related parts.The terminations on it are [0].You should set this device to 3.3V.The device has a total of 48pins.Operation is performed through the 48pins.Currently, Surface Mountis mounting it.In order to ensure reliability, the unit works at a minimum working temperature of [0].As long as the maximum value is [0], the part runs consistently.Electronic components in this system belong to the Line Driver or Receivers family.The interface IC conducts at a voltage of 3.3V.A LINE DRIVERtype interface IC is used in this part.The part is embedded with 3 drivers. DS90C363BMT FeaturesIt is based on DS90C363. Set the part at 3.3V volts Interface IC Type : LINE DRIVER with 3 Drivers DS90C363BMT ApplicationsThere are a lot of Texas Instruments DS90C363BMT Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DAC8742HPBS OverviewIt's a good fit for the 32-TQFP package.Surface Mountis used to install this component.In this case, it is appropriate for the component applied in HART Modem.The ability to supply 1.71V~5.5V volts is available with certain devices.A DAC8742can be used to identify related parts.The number of terminations is 32.The device has a total of 32pins.As a result, the device operates at a minimum working temperature of -55°Cto ensure its reliability.When 125°Cis the maximum value, the part will run consistently.A telecom IC type of PROGRAMMABLE MODEMis used in the device. DAC8742HPBS FeaturesIt is based on DAC8742. Telecom IC Type : PROGRAMMABLE MODEM DAC8742HPBS ApplicationsThere are a lot of Texas Instruments DAC8742HPBS Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | L9679BTR OverviewA case of Tape & Reel (TR)is provided.It is possible to find related parts based on the L9679. L9679BTR FeaturesIt is based on L9679. L9679BTR ApplicationsThere are a lot of STMicroelectronics L9679BTR Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | LPC47M182E-NW OverviewIt is appropriate for the device to use the 128-BQFPpackage.There is a Traycase included with it.The component is installed in the way indicated by Surface Mount.This component is suitable for the application in Controller.Devices that are capable of supplying 3.3Vvolts may be used.Based on the [0], it is possible to locate related parts.It contains 128terminations.Keep in mind that this device should be set to 3.3V.There is a voltage of 70°Csupplied to the potentiometer.Currently, it has 13inputs and outputs. LPC47M182E-NW FeaturesIt is based on LPC47M182. Set the part at 3.3V volts LPC47M182E-NW ApplicationsThere are a lot of Microchip Technology LPC47M182E-NW Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN65LVDS86AQDGGG4 OverviewIt is appropriate for the device to use the 48-TFSOP (0.240, 6.10mm Width)package.The item is packaged in a Tube case.The component is installed according to Surface Mount.This component applies to Displays, Monitors, TV.The device is capable of supplying 3V~3.6V volts.Using the 65LVDS86can help you find related parts.It has 48terminations.You should set this device to 3.3V.In total, it consists of 48pins.Operation is carried out through the 48pins.For optimum reliability, it operates at a temperature of [0].When the value is set to [0], the part will run consistently.The electronic components is from Line Driver or Receivers family.In the interface IC, the supply voltage is set to 3.3V.The electronic part is a member of the Automotive, AEC-Q100, 65LVDS series.A total of 21drivers are embedded on the component. SN65LVDS86AQDGGG4 FeaturesIt is based on 65LVDS86. Set the part at 3.3V volts with 21 Drivers SN65LVDS86AQDGGG4 ApplicationsThere are a lot of Texas Instruments SN65LVDS86AQDGGG4 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | EQCO850SC.3 OverviewThe 16-VQFN Exposed Padpackage would be a good match for it.The item is packaged in a Tube case.It is installed according to Surface Mount.In this case, it is appropriate for the component applied in Camera.It has 16terminations.Make sure this device is set to 3.3V.A total of 16pins are located on it.It is mounted by Surface Mount.A minimum working temperature of -10°Cis required to ensure the reliability of the device.In addition to ensuring the consistency of the part, 70°Cis the maximum value possible.The interface IC conducts in a supply voltage of 3.3V.There is a telecom IC type of ETHERNET TRANSCEIVERin the device. EQCO850SC.3 FeaturesSet the part at 3.3V volts Telecom IC Type : ETHERNET TRANSCEIVER EQCO850SC.3 ApplicationsThere are a lot of Microchip Technology EQCO850SC.3 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | L9680 OverviewIt's a good fit for the 100-TQFP Exposed Pad package.It is packaged in a Tray case.In the way of [0], this component is installed.This component applies to Automotive.It is possible to find devices that supply 5.5V volts.On the basis of the [0], it is possible to find related parts.A total of 100terminations have been recorded.The potentiometer conducts in a supply voltage of 95°C.It is a member of the Automotive, AEC-Q100series of electronic components.The component was designed to operate at a minimum temperature of -40°C.CONSUMER CIRCUIT identifies the type of consumer IC for the part. L9680 FeaturesIt is based on L9680. L9680 ApplicationsThere are a lot of STMicroelectronics L9680 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SCANSTA111SMX/NOPB OverviewIt's a good fit for the 49-LFBGA package.It comes in a case with a [0].In this case, this component is installed in accordance with Surface Mount.It is appropriate for the component applied in Testing Equipment.It is possible to find devices that supply 3V~3.6V volts.The SCANSTA111can be used to find related parts.It contains 49terminations.It is important to note that this device should be set to 3.3V.In total, it consists of 49pins.In order to operate, we use the 49pins.The unit operates at a minimum working temperature of -40°Cin order to ensure reliable operation.By setting the value of 85°Cto the maximum, this ensures that the part will run consistently.There are electronic components in the Other Microprocessor ICs family.It incorporates MICROPROCESSOR CIRCUITUPS/UCS/Peripheral ICs.It is capable of delivering voltage at 3.3V degrees Celsius. SCANSTA111SMX/NOPB FeaturesIt is based on SCANSTA111. Set the part at 3.3V volts MICROPROCESSOR CIRCUIT of uPs/uCs/Peripheral ICs Type SCANSTA111SMX/NOPB ApplicationsThere are a lot of Texas Instruments SCANSTA111SMX/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | DME1737-NW OverviewThis fits nicely with the 128-BQFP package.The item is packaged in a Tray case.In the way of [0], this component is installed.In this case, it is appropriate for the component applied in I/O Controller.The ability to supply 3.3V volts is available with certain devices.Based on the [0], related parts can be found.In total, it consists of 128pins.The mount is Surface Mount. DME1737-NW FeaturesIt is based on DME1737. DME1737-NW ApplicationsThere are a lot of Microchip Technology DME1737-NW Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | LPC47M112-MW OverviewIt is appropriate for the device to use the 100-BQFPpackage.A case of Trayis provided.Surface Mountis used to install this component.Based on the [0], it is possible to locate related parts.It has 100terminations.It is important to keep in mind that this device should be set to 3.3V.There are a total of 100 pins on it.This electronic component belongs to the family of [0].The interface IC conducts at a voltage of 3.3V.Potentiometers operate at a supply voltage of 70°C. LPC47M112-MW FeaturesIt is based on LPC47M112. Set the part at 3.3V volts LPC47M112-MW ApplicationsThere are a lot of Microchip Technology LPC47M112-MW Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SCANSTA111MTX/NOPB OverviewThis fits nicely with the 48-TFSOP (0.240, 6.10mm Width) package.There is a Tape & Reel (TR)case included with it.In this case, this component is installed in accordance with Surface Mount.This is appropriate for the component that is applied in Testing EquipmentThe device is capable of supplying 3V~3.6V volts.On the basis of the [0], it is possible to find related parts.The termination count on it is [0].It is important to remember that this device should be set to 3.3V.There are a total of 48 pins on the device.Operation is carried out through the 48pins.The device is mounted by Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].As long as the maximum value is [0], the part runs consistently.There are electronic components in the Other Microprocessor ICs family.In this device, there are MICROPROCESSOR CIRCUIT uPs, uCs, or peripheral ICs.Voltage at 3.3Vcan be delivered by the device. SCANSTA111MTX/NOPB FeaturesIt is based on SCANSTA111. Set the part at 3.3V volts MICROPROCESSOR CIRCUIT of uPs/uCs/Peripheral ICs Type SCANSTA111MTX/NOPB ApplicationsThere are a lot of Texas Instruments SCANSTA111MTX/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TLK4201EARGTR OverviewThe 16-VFQFN Exposed Padpackage is a good fit for this feature.It is packaged in a Tape & Reel (TR) case.In the way of [0], this component is installed.Digital High-Speed Linkapplies the component appropriately.It is possible to obtain devices that supply 3V~3.6V volts.Using the TLK4201can help you find related parts.The number of terminations is 16.It is important to keep in mind that this device should be set to 3.3V.The device has a total of 16pins.Operation is performed through the 16pins.The device is mounted by Surface Mount.The device must operate at a minimum working temperature of -40°Cin order to be reliable.In order to maintain consistency, a maximum value of 85°Cis recommended.There are electronic components in the Other Telecom ICs family.Voltage can be delivered at 3.3V.TELECOM CIRCUITis the telecom IC type used in the device. TLK4201EARGTR FeaturesIt is based on TLK4201. Set the part at 3.3V volts Telecom IC Type : TELECOM CIRCUIT TLK4201EARGTR ApplicationsThere are a lot of Texas Instruments TLK4201EARGTR Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | SCH4304-NS OverviewQFPis an appropriate package for this device.The item is packaged in a Tray case.This component is installed in the way of Surface Mount.This component applies to Controller.It is possible to obtain devices that supply 3.3V volts.By using the [0], it is possible to find parts that are related.It contains a total of 128 pins.It is designed to operate at 3.3V supply voltage, with the interface IC conducting at this voltage. SCH4304-NS FeaturesIt is based on SCH4304. SCH4304-NS ApplicationsThere are a lot of Microchip Technology SCH4304-NS Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CR216MTD OverviewIt is appropriate for the device to use the 48-TFSOP (0.240, 6.10mm Width)package.It is packaged in a Tube case.There is no installation of this component in the way of Surface Mount.It is capable of supplying a voltage of 3V~3.6V.The DS90CR216can be used to locate related parts.There are 48 terminations on it.Make sure that this device is set to 3.3V.It contains a total of 48 pins.It is mounted by Surface Mount.As a result, the device operates at a minimum working temperature of -40°Cto ensure its reliability.This value enables the part to run consistently with a maximum value of [0].Electronic components from the family Line Driver or Receiversare used.The interface IC conducts in a supply voltage of 3.3V.LINE RECEIVERis the type of interface IC for this part.As part of the package, it is embedded with 21drivers. DS90CR216MTD FeaturesIt is based on DS90CR216. Set the part at 3.3V volts Interface IC Type : LINE RECEIVER with 21 Drivers DS90CR216MTD ApplicationsThere are a lot of Texas Instruments DS90CR216MTD Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS90CF383MTDX/NOPB OverviewThe 56-TFSOP (0.240, 6.10mm Width)package is a good fit for this feature.The item is packaged in a Tape & Reel (TR) case.The component is installed according to Surface Mount.It is possible to obtain devices that supply 3V~3.6V volts.The DS90CF383can be used to locate related parts.The number of terminations is 56.It is important to note that this device should be set to 3.3V.56pins are on it in total.In order to operate, we use the 56pins.It is mounted on Surface Mount.The device must operate at a minimum working temperature of -40°Cin order to be reliable.The maximum value of 85°C assures that the part runs consistently.Electronic components of the Line Driver or Receiversfamily are used.An interface IC operates at a supply voltage of 3.3V.This part uses interface IC type LINE DRIVER.A total of 4drivers are embedded on the component. DS90CF383MTDX/NOPB FeaturesIt is based on DS90CF383. Set the part at 3.3V volts Interface IC Type : LINE DRIVER with 4 Drivers DS90CF383MTDX/NOPB ApplicationsThere are a lot of Texas Instruments DS90CF383MTDX/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STA2058EXTR OverviewThe 144-LFBGApackage would be a good match for it.The package contains a Tape & Reel (TR) case.In the way of [0], this component is installed.GPSapplies to this component.It is capable of supplying a voltage of 3V~3.6V.Using the STA2058you can find related parts.The number of terminations is 144.It is important to note that this device should be set to 3.3V.The device has a total of 144pins.For operation, 144pins are used.It is mounted on Surface Mount.For optimum reliability, it operates at a temperature of [0].Keeping 85°Cas the maximum value will ensure consistency.An interface IC operates at a supply voltage of 3.3V.There are MICROPROCESSOR CIRCUIT uPs/uCs/Peripheral ICs integrated into this device.The electronic part is a member of the TESEO? series. STA2058EXTR FeaturesIt is based on STA2058. Set the part at 3.3V volts MICROPROCESSOR CIRCUIT of uPs/uCs/Peripheral ICs Type STA2058EXTR ApplicationsThere are a lot of STMicroelectronics STA2058EXTR Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TLK4201EARGTT OverviewIt is appropriate for the device to use the 16-VFQFN Exposed Padpackage.There is a Tape & Reel (TR)case included with it.This component is installed in the way of Surface Mount.In this case, it is appropriate for the component applied in Digital High-Speed Link.The device is capable of supplying 3V~3.6V volts.Based on the [0], related parts can be found.A total of 16terminations have been recorded.This device should be set to 3.3V.A total of 16pins are located on it.Operation is performed via the 16pins.The unit is mounted on Surface Mount.The device must operate at a minimum working temperature of -40°Cin order to be reliable.As long as the maximum value is [0], the part runs consistently.Electronic components of the Other Telecom ICsfamily are used.It is capable of delivering voltage at 3.3V.TELECOM CIRCUITis the telecom IC type used in the device. TLK4201EARGTT FeaturesIt is based on TLK4201. Set the part at 3.3V volts Telecom IC Type : TELECOM CIRCUIT TLK4201EARGTT ApplicationsThere are a lot of Texas Instruments TLK4201EARGTT Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | FDC37C669-MT OverviewIt's a good fit for the 100-LQFP package.This product comes in a Tray case.It is installed according to Surface Mount.It is possible to obtain devices that supply 4.5V~5.5V volts.Based on the [0], it is possible to locate related parts.A total of 100pins are located on it.This is mounted by Surface Mount.It is designed to work at a minimum working temperature of 0°C to ensure reliability.By setting the value of 70°Cto the maximum, this ensures that the part will run consistently.A total of 13I/Os are programmed into the device. FDC37C669-MT FeaturesIt is based on FDC37C669. FDC37C669-MT ApplicationsThere are a lot of Microchip Technology FDC37C669-MT Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | STA2058 OverviewThe 64-LQFPpackage is a good fit for this feature.It comes in a case with a [0].There is no installation of this component in the way of Surface Mount.It is appropriate for the component applied in GPS.It is possible to find devices that supply 3V~3.6V volts.By using the [0], it is possible to find parts that are related.In total, there are 64terminations.It is important to remember that this device should be set to 3.3V.64pins are on it in total.64 pins are used for operation.By [0], it is mounted.The device operates at a minimum working temperature of -40°C in order to ensure its reliability.The maximum value of 85°C assures that the part runs consistently.The interface IC conducts in a supply voltage of 3.3V.There are MICROPROCESSOR CIRCUIT uPs/uCs/Peripheral ICs integrated into this device.The TESEO?series is comprised of this electronic part.There are 48 I/Os on this device. STA2058 FeaturesIt is based on STA2058. Set the part at 3.3V volts MICROPROCESSOR CIRCUIT of uPs/uCs/Peripheral ICs Type STA2058 ApplicationsThere are a lot of STMicroelectronics STA2058 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DS125DF111SQ OverviewThe 24-WFQFN Exposed Padpackage is a good fit for this feature.A Tape & Reel (TR)case is provided with it.The component has been installed according to the Surface Mountmethod.This is appropriate for the component that is applied in Signal RetimerDevices that are capable of supplying 2.5V 3.3Vvolts may be used.Using the DS125DF111you can find related parts.This termination has 24terminations.It is recommended that you set this device to 2.5V.There are a total of 24 pins on it.By [0], it is mounted.It operates at a minimum working temperature of -40°C to ensure reliability.This value enables the part to run consistently with a maximum value of [0].It is designed to operate at 2.5V supply voltage, with the interface IC conducting at this voltage.Using this device, ALSO OPERATE 3.3 VOLT SUPPLYcan also be established.2channels are available on the device. DS125DF111SQ FeaturesIt is based on DS125DF111. Set the part at 2.5V volts DS125DF111SQ ApplicationsThere are a lot of Texas Instruments DS125DF111SQ Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
