Particle, Dust Sensors(3401)

Part	Manufacturer	Description		Stock	Action
815-LM93CIMTX/NOPB	Texas Instruments	LM93CIMTX/NOPB Overview It is appropriate for the device to use the 56-TFSOP (0.240, 6.10mm Width)package.It is packaged in a Tape & Reel (TR) case.There is no installation of this component in the way of Surface Mount.Monitorsapplies it to the appropriate component.The device is capable of supplying voltages of 3V~3.6V volts.By using the [0], it is possible to find parts that are related.There are 56 terminations on it.It is important to note that this device should be set to 3.3V.In total, it contains 56pins.In order for the operation to be performed, the 56pins must be connected.In this case, it is mounted by Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].In order to maintain consistency, a maximum value of 85°Cis recommended.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this device employs.In this device, there are 16channels. LM93CIMTX/NOPB Features It is based on LM93. Set the part at 3.3V volts Other Analog IC Type : POWER SUPPLY SUPPORT CIRCUIT LM93CIMTX/NOPB Applications There are a lot of Texas Instruments LM93CIMTX/NOPB Specialized Interface ICs applications. Compatible with 65 V DACs and ADCs such as Short/Medium Loop: approximately 2000 ft. of 26 AWG, Precision instrumentation HDTV Low-Voltage Switching Systems RGB switches Optical Applications High speed data transmission line cards Audio/video switches	PDF	999 In-stock	Get Quote
815-LP8727TMX/NOPB	Texas Instruments	LP8727TMX/NOPB Overview The 25-WFBGA, DSBGApackage fits the device well.It is packaged in a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.The component applied in MP3 Players, Portable Media Playersis appropriate.Based on the [0], it is possible to locate related parts.The terminations on it are [0].Make sure that this device is set to 5V.The device has a total of 25pins.A minimum working temperature of -40°Cis required to ensure the reliability of the device.It is imperative that the maximum value of 85°Cis maintained in order to ensure continued operation.This interface IC operates at a voltage of 5V.This device makes use of an analog integrated circuit (IC) [0].It has a total of 3channels.Maximum supply voltage is 7V. LP8727TMX/NOPB Features It is based on LP8727. Set the part at 5V volts Other Analog IC Type : POWER SUPPLY SUPPORT CIRCUIT LP8727TMX/NOPB Applications There are a lot of Texas Instruments LP8727TMX/NOPB Specialized Interface ICs applications. Voice over IP/DSL – Integrated Access Devices, Smart Audio and video switching Channel Banks Medical/Industrial SONET/SDH and PDH Multiplexers Industrial control systems Channelized and Unchannelized DS3 applications Sample hold systems Audio/video switches ATM and Frame Relay Equipment	PDF	999 In-stock	Get Quote
815-XIO1100ZGB	Texas Instruments	XIO1100ZGB Overview The 100-LFBGApackage is a good fit for it.There is a Traycase included with it.In the way of [0], this component is installed.The device is capable of supplying voltages of 1.35V~1.65V 3V~3.6V volts.It is possible to find related parts based on the IO1100.The termination count on it is [0].Keep in mind that this device should be set to 1.5V.There are a total of 100 pins on the device.In order to operate, we use the 100pins.This is mounted by Surface Mount.The device must operate at a minimum working temperature of 0°Cin order to be reliable.This value enables the part to run consistently with a maximum value of [0].Electronic components of the Bus Controllersfamily are used.It is designed to operate at 1.8V supply voltage, with the interface IC conducting at this voltage.This device supports BUS CONTROLLER, PCIuPs/uCs/peripheral ICs.It has a total of 1channels.The part may be run at a maximum frequency of 125MHz. XIO1100ZGB Features It is based on IO1100. Set the part at 1.5V volts BUS CONTROLLER, PCI of uPs/uCs/Peripheral ICs Type XIO1100ZGB Applications There are a lot of Texas Instruments XIO1100ZGB Specialized Interface ICs applications. Precision instrumentation Fault Tolerant Systems High speed data transmission line cards Isolation ?Central office or PBX (Private Branch Exchange) ?Remote wireless modules Voice over IP/DSL – Integrated Access Devices, Smart Relay replacements PBXs AD7840/8, AD7870/1/2/4/5/6/8	PDF	999 In-stock	Get Quote
536-LPC47N217-JV	Microchip Technology	LPC47N217-JV Overview It's a good fit for the 64-LQFP package.It is packaged in a Tray case.In the way of [0], this component is installed.Controllerapplies it to the appropriate component.Based on the [0], related parts can be found.It consists of 64terminations.In total, it consists of 64pins.This is mounted by Surface Mount.The device operates at a minimum working temperature of 0°C in order to ensure its reliability.When the value is set to [0], the part will run consistently.It is designed to operate at 3.3V supply voltage, with the interface IC conducting at this voltage.This device consists of PARALLEL IO PORT, GENERAL PURPOSE UPs, UCs, or peripheral ICs.A total of 14I/Os have been programmed into it. LPC47N217-JV Features It is based on LPC47N217. PARALLEL IO PORT, GENERAL PURPOSE of uPs/uCs/Peripheral ICs Type LPC47N217-JV Applications There are a lot of Microchip Technology LPC47N217-JV Specialized Interface ICs applications. ?Cable Telephony – NIU, Set-Top Box, Home Side Box, Audio and video signal routing Cellular phones DVD-R Video signal routing Short/Medium Loop: approximately 2000 ft. of 26 AWG, Precision data acquisition Avionics Switching Systems ?Central office or PBX (Private Branch Exchange)	PDF	999 In-stock	Get Quote
536-SEC1110-A5-02NC	Microchip Technology	SEC1110-A5-02NC Overview This fits nicely with the 16-VFQFN Exposed Pad package.A case of Trayis provided.Surface Mountis the way in which this component is installed.This component applies to Smart Card.It is capable of supplying a voltage of 3V~5.5V.On the basis of the [0], it is possible to find related parts.The number of terminations is 16.It is important to keep in mind that this device should be set to 5V.For operation, 16pins are used.It is mounted on Surface Mount.A minimum working temperature of 0°Cis required to ensure the reliability of the device.In order to maintain consistency, a maximum value of 70°Cis recommended.This device supports BUS CONTROLLER, UNIVERSAL SERIAL BUSuPs/uCs/peripheral ICs. SEC1110-A5-02NC Features It is based on SEC1110. Set the part at 5V volts BUS CONTROLLER, UNIVERSAL SERIAL BUS of uPs/uCs/Peripheral ICs Type SEC1110-A5-02NC Applications There are a lot of Microchip Technology SEC1110-A5-02NC Specialized Interface ICs applications. Video signal routing Audio and video signal routing SDH/SONET multiplexers Low-Voltage Short/Medium Loop: approximately 2000 ft. of 26 AWG, Cable Modem, Cable PC Cellular phones Battery-powered systems Automotive applications High-Voltage	PDF	999 In-stock	Get Quote
536-UFX6000-VE	Microchip Technology	UFX6000-VE Overview The 225-LFBGApackage fits the device well.A Traycase is provided with it.Surface Mountis the way in which this component is installed.In this case, it is appropriate for the component applied in Graphics Controller.There is the potential for the device to supply 1.2V 1.8V 3.3V volts.A UFX6000can be used to identify related parts.In total, there are 225terminations.It is important to note that this device should be set to 1.2V.It has a total of 225pins.In order to operate, we use the 225pins.It operates at a minimum working temperature of 0°C to ensure reliability.When the value is set to [0], the part will run consistently.This electronic component belongs to the family of [0].In this device, there is BUS CONTROLLER, UNIVERSAL SERIAL BUS uPs/uCs/peripheral IC.This electronic part is a member of ViewSpan? series.As far as voltage delivery is concerned, it is capable of delivering voltage at 1.2/3.3V.For the output frequency to be effective, it should not exceed 25MHz. UFX6000-VE Features It is based on UFX6000. Set the part at 1.2V volts BUS CONTROLLER, UNIVERSAL SERIAL BUS of uPs/uCs/Peripheral ICs Type UFX6000-VE Applications There are a lot of Microchip Technology UFX6000-VE Specialized Interface ICs applications. Microprocessor Controlled Analog Systems Sample-and-hold systems Public switching systems and PBX interfaces Residential Gateways, Home Gateway/Router Multiplexers Audio and video routing Signal routing between systems Medical systems and 5 REN loads Avionics test equipment	PDF	999 In-stock	Get Quote
761-ST8034PQR	STMicroelectronics	ST8034PQR Overview The 16-WFQFN Exposed Padpackage is a good fit for this feature.It comes in a Tape & Reel (TR) case.It is installed according to Surface Mount.This is appropriate for the component that is applied in Smart CardA device capable of providing 3V 5V volts is available.On the basis of the [0], it is possible to find related parts.In total, it contains 16pins.The mount is Surface Mount.As a result, the device operates at a minimum working temperature of -25°Cto ensure its reliability.By setting the value of 85°Cto the maximum, this ensures that the part will run consistently.It is designed to operate at 5V supply voltage, with the interface IC conducting at this voltage.This part has an interface IC type of INTERFACE CIRCUIT. ST8034PQR Features It is based on ST8034. Interface IC Type : INTERFACE CIRCUIT ST8034PQR Applications There are a lot of STMicroelectronics ST8034PQR Specialized Interface ICs applications. DSLAMs Residential Gateways, Home Gateway/Router Data Acquisition Systems SONET/SDH and PDH Multiplexers High speed data transmission line cards ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA ?Digital access cross connects Cable Modem, Cable PC High-Voltage Sample-and-hold systems	PDF	999 In-stock	Get Quote
761-ST8024LACDR	STMicroelectronics	ST8024LACDR Overview It's a good fit for the 28-SOIC (0.295, 7.50mm Width) package.It is packaged in a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.Smart Card Reader, Writerapplies the component appropriately.It is capable of supplying a voltage of 2.7V~6.5V.It is possible to find related parts based on the ST8024.There are 28 terminations on it.It is recommended that you set this device to 3.3V.A total of 28pins are located on it.Operation is carried out using the 28pins.Surface Mountmounts it.The unit operates at a minimum working temperature of -25°Cin order to ensure reliable operation.As long as the maximum value is [0], the part runs consistently.ALSO OPERATES AT 5V SUPPLY can also be founded when using this device.INTERFACE CIRCUITis the type of interface IC for this part. ST8024LACDR Features It is based on ST8024. Set the part at 3.3V volts Interface IC Type : INTERFACE CIRCUIT ST8024LACDR Applications There are a lot of STMicroelectronics ST8024LACDR Specialized Interface ICs applications. Channel Banks Routers PCMCIA cards Voice over IP/DSL – Integrated Access Devices, Smart Sample hold systems Mechanical reed relay replacement Compatible with 65 V DACs and ADCs such as Power routing Digital Cross-Connects Existing multiplexer applications (both fault-protected and	PDF	999 In-stock	Get Quote
815-TUSB422IYFPR	Texas Instruments	TUSB422IYFPR Overview The 9-XFBGA, DSBGApackage would be a good match for it.It is packaged in a Tape & Reel (TR) case.The component has been installed according to the Surface Mountmethod.USBapplies the component appropriately.It is capable of supplying a voltage of 2.7V~5.5V.Based on the [0], related parts can be found.A total of 9terminations have been recorded.It is important to note that this device should be set to 3.7V.The device has a total of 9pins.A minimum working temperature of -40°Cis required to ensure the reliability of the device.Keeping 85°Cas the maximum value will ensure consistency.In this device, POWER SUPPLY SUPPORT CIRCUITis the analog IC.The device has 1 channels on it. TUSB422IYFPR Features It is based on TUSB422. Set the part at 3.7V volts Other Analog IC Type : POWER SUPPLY SUPPORT CIRCUIT TUSB422IYFPR Applications There are a lot of Texas Instruments TUSB422IYFPR Specialized Interface ICs applications. Microprocessor Controlled Analog Systems Routers Industrial control systems PCMCIA cards Video switching Residential Gateways, Home Gateway/Router Avionics test equipment Fault Tolerant Systems Medical systems PBXs	PDF	50 In-stock	Get Quote
815-PCA9543ADR	Texas Instruments	PCA9543ADR Overview The 14-SOIC (0.154, 3.90mm Width)package is a good fit for this feature.This product comes in a Tape & Reel (TR) case.In the way of [0], this component is installed.2-Channel I2C Multiplexerapplies to this component.Devices that are capable of supplying 2.3V~5.5Vvolts may be used.Based on the [0], related parts can be found.The termination count on it is [0].It is important to remember that this device should be set to 3.6V.There are a total of 14 pins on the device.In order to operate, we use the 14pins.A minimum working temperature of -40°Cis required to ensure the reliability of the unit.This value enables the part to run consistently with a maximum value of [0].It has a channel count of [0].The part can be run at a maximum frequency of 400kHz Hz. PCA9543ADR Features It is based on CA9543. Set the part at 3.6V volts PCA9543ADR Applications There are a lot of Texas Instruments PCA9543ADR Specialized Interface ICs applications. PBXs Compatible with 65 V DACs and ADCs such as Video signal routing Public switching systems and PBX interfaces Existing multiplexer applications (both fault-protected and Industrial and process control systems Audio and video switching DVD-R Channelized and Unchannelized DS3 applications New designs requiring multiplexer functions	PDF	999 In-stock	Get Quote
815-TXS02612ZQSR	Texas Instruments	TXS02612ZQSR Overview The 24-VFBGApackage fits the device well.It is packaged in a Tape & Reel (TR) case.This component is installed in the way of Surface Mount.Cell Phoneapplies the component appropriately.An output voltage of 1.1V~3.6V volts can be provided by the device.Using the TXS02612you can find related parts.In total, there are 24terminations.It is important to keep in mind that this device should be set to 1.2V.There are a total of 24 pins on the device.Operation is carried out using the 24pins.This is mounted by Surface Mount.It is designed to work at a minimum working temperature of -40°C to ensure reliability.As long as the maximum value is [0], the part runs consistently.Electronic components of the Parallel IO Portfamily are used.The interface IC conducts in a supply voltage of 3.6V.The number of uPs, uCs, and peripheral ICs that are incorporated into this device is PARALLEL IO PORT, GENERAL PURPOSE.The device can deliver voltage at 1.2/3.3V volts.As a result, the device has a total of 2 ports.Currently, it has 15inputs and outputs. TXS02612ZQSR Features It is based on TXS02612. Set the part at 1.2V volts PARALLEL IO PORT, GENERAL PURPOSE of uPs/uCs/Peripheral ICs Type TXS02612ZQSR Applications There are a lot of Texas Instruments TXS02612ZQSR Specialized Interface ICs applications. ?Central office or PBX (Private Branch Exchange) DVD-R Data switching High reliability control systems Cross Connects Routers ?Microwave transmission systems Industrial control systems Compatible with 65 V DACs and ADCs such as Precision instrumentation	PDF	999 In-stock	Get Quote
318-PTN5110THQZ	NXP Semiconductors	PTN5110THQZ Overview 16-XFQFN Exposed Padis an appropriate package for this device.The item is packaged in a Tape & Reel (TR) case.The component is installed according to Surface Mount.This component applies to USB. PTN5110THQZ Features PTN5110THQZ Applications There are a lot of NXP USA Inc. PTN5110THQZ Specialized Interface ICs applications. Communication systems Access Concentrators RGB switches CSU/DSUs New designs requiring multiplexer functions Precision instrumentation Data Acquisition Systems High-Voltage Compatible with 65 V DACs and ADCs such as Sample-and-hold systems	PDF	999 In-stock	Get Quote
815-PCA9546ADR	Texas Instruments	PCA9546ADR Overview This fits well into the 16-SOIC (0.154, 3.90mm Width) package.A Tape & Reel (TR)case is provided with it.Surface Mountis used to install this component.In this case, it is appropriate for the component applied in Translating Switch.The device is capable of supplying 2.3V~5.5V volts.A CA9546can be used to identify related parts.It consists of 16terminations.You should set this device to 2.5V.It has a total of 16pins.Operation is carried out through the 16pins.A minimum working temperature of -40°Cis required to ensure the reliability of the unit.As long as the maximum value is [0], the part runs consistently.A frequency of 400kHzis suitable for running the part. PCA9546ADR Features It is based on CA9546. Set the part at 2.5V volts PCA9546ADR Applications There are a lot of Texas Instruments PCA9546ADR Specialized Interface ICs applications. Data switching Communication systems Short/Medium Loop: approximately 2000 ft. of 26 AWG, ATM and Frame Relay Equipment DVD-R Signal routing between systems SONET/SDH ADM Battery-powered systems Communication systems Battery Powered Systems	PDF	999 In-stock	Get Quote
815-PCA9545APWR	Texas Instruments	PCA9545APWR Overview It fits well with the package [0].It is packaged in a Tape & Reel (TR) case.The component is installed according to Surface Mount.This component applies to Translating Switch.The ability to supply 2.3V~5.5V volts is available with certain devices.On the basis of the [0], it is possible to find related parts.The termination count on it is [0].It is important to keep in mind that this device should be set to 2.5V.In total, it contains 20pins.Operation is performed via the 20pins.It is designed to work at a minimum working temperature of -40°C to ensure reliability.As long as the maximum value is [0], the part runs consistently.This part can be run at a maximum frequency of 400kHz.Currently, there are 4 inputs available. PCA9545APWR Features It is based on CA9545. Set the part at 2.5V volts PCA9545APWR Applications There are a lot of Texas Instruments PCA9545APWR Specialized Interface ICs applications. SDH/SONET multiplexers Microprocessor Controlled Analog Systems Medical systems Communication systems Multi-Line E1 Interface Cards nonfault-protected) Modems High-Voltage Automatic test equipment Audio signal routing	PDF	999 In-stock	Get Quote
318-PCA9547BS,118	NXP Semiconductors	PCA9547BS,118 Overview 24-VFQFN Exposed Padis an appropriate package for this device.A Tape & Reel (TR)case is provided with it.It is installed according to Surface Mount.This component applies to Translating Multiplexer.Devices that are capable of supplying 2.3V~3.6V 4.5V~5.5Vvolts may be used.A PCA9547can be used to identify related parts.It has 24terminations.It is important to remember that this device should be set to 2.5V.In order to operate, the 24pins are used.Potentiometers conduct at 85°C volts.Temperatures below -40°Care recommended for the component.It is also possible to find ALSO OPERATES AT 4.5V TO 5.5V SUPPLYusing this device.The inputs to be operated are [0]. PCA9547BS,118 Features It is based on PCA9547. Set the part at 2.5V volts PCA9547BS,118 Applications There are a lot of NXP USA Inc. PCA9547BS,118 Specialized Interface ICs applications. Battery Powered Systems High speed data transmission line cards Public switching systems and PBX interfaces MP3 players SONET/SDH ADM High-Voltage Short/Medium Loop: approximately 2000 ft. of 26 AWG, Microprocessor Controlled Analog Systems Automatic test equipment Communications systems	PDF	999 In-stock	Get Quote
815-PCA9518PWR	Texas Instruments	PCA9518PWR Overview It fits well with the package [0].A Tape & Reel (TR)case is provided with it.In the way of [0], this component is installed.Bufferis appropriate for this component.The device is capable of supplying 3V~3.6V volts.By using the [0], it is possible to find parts that are related.The termination count on it is [0].It is recommended that you set this device to 3.3V.The device has a total of 20pins.In order to operate, we use the 20pins.The device must operate at a minimum working temperature of -40°Cin order to be reliable.As long as the maximum value is [0], the part runs consistently.An interface IC operates with a supply voltage of 3.6V.In this case, it is suitable to run the part at a maximum frequency of 400kHz.A total of 5I/Os have been programmed into it. PCA9518PWR Features It is based on CA9518. Set the part at 3.3V volts PCA9518PWR Applications There are a lot of Texas Instruments PCA9518PWR Specialized Interface ICs applications. ?Digital access cross connects PDAs PBXs Multi-Line E1 Interface Cards RGB switches Existing multiplexer applications (both fault-protected and Medical Instrumentation Precision instrumentation Power routing New designs requiring multiplexer functions	PDF	999 In-stock	Get Quote
761-STDVE003ABTR	STMicroelectronics	STDVE003ABTR Overview The 80-TQFPpackage would be a good match for it.It comes in a case with a [0].In the way of [0], this component is installed.The component applied in Signal Processingis appropriate.It is possible to find devices that supply 3.135V~3.465V volts.Using the STDVE003you can find related parts.A total of 80pins are located on it.Currently, Surface Mountis mounting it.As a result, the device operates at a minimum working temperature of -40°Cto ensure its reliability.The maximum value of 85°C assures that the part runs consistently.The interface IC conducts at a voltage of 3.3V.In this device, there are 4channels. STDVE003ABTR Features It is based on STDVE003. STDVE003ABTR Applications There are a lot of STMicroelectronics STDVE003ABTR Specialized Interface ICs applications. Precision test equipment Microprocessor Controlled Analog Systems Digital cross connects (DSX-1) Ultrasound Communications systems (FTTH) Modems Audio/video switches RGB switches ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA	PDF	999 In-stock	Get Quote
815-PCA9518DBR	Texas Instruments	PCA9518DBR Overview It's a good fit for the 20-SSOP (0.209, 5.30mm Width) package.This product comes in a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.It is appropriate for the component applied in Buffer.It is possible to find devices that supply 3V~3.6V volts.The CA9518can be used to locate related parts.The termination count on it is [0].It is important to remember that this device should be set to 3.3V.The device has a total of 20pins.A device's operation is controlled by the 20pins.It operates at a minimum working temperature of -40°C to ensure reliability.This value enables the part to run consistently with a maximum value of [0].ICs used in interfaces are operated at a supply voltage of 3.6V.The part can be run at a maximum frequency of 400kHz Hz.There are 5I/O ports on the device. PCA9518DBR Features It is based on CA9518. Set the part at 3.3V volts PCA9518DBR Applications There are a lot of Texas Instruments PCA9518DBR Specialized Interface ICs applications. PDAs Data Acquisition Systems RGB switches Short/Medium Loop: approximately 2000 ft. of 26 AWG, DVD-R Fiber–Fiber In The Loop (FITL), Fiber to the Home Communications systems New designs requiring multiplexer functions Battery Powered Instruments Precision instrumentation	PDF	999 In-stock	Get Quote
815-PCA9518DWR	Texas Instruments	PCA9518DWR Overview It's a good fit for the 20-SOIC (0.295, 7.50mm Width) package.The item is packaged in a Tape & Reel (TR) case.Surface Mountis used to install this component.The component applied in Bufferis appropriate.It is possible to find devices that supply 3V~3.6V volts.It is possible to find related parts based on the CA9518.The termination count on it is [0].It is important to remember that this device should be set to 3.3V.There are a total of 20 pins on it.In order to operate, we use the 20pins.It operates at a minimum working temperature of -40°C to ensure reliability.As long as the maximum value is [0], the part runs consistently.The interface IC conducts in a supply voltage of 3.6V.The part may be run at a maximum frequency of 400kHz.It is programmed with 5 I/Os. PCA9518DWR Features It is based on CA9518. Set the part at 3.3V volts PCA9518DWR Applications There are a lot of Texas Instruments PCA9518DWR Specialized Interface ICs applications. Battery Powered Instruments Multiplexers Low-Voltage Fiber–Fiber In The Loop (FITL), Fiber to the Home Transmit and ?Remote wireless modules Residential Gateways, Home Gateway/Router Relay Replacement Audio and video signal routing High speed data transmission line cards	PDF	999 In-stock	Get Quote
318-TDA8023TT/C1,118	NXP Semiconductors	TDA8023TT/C1,118 Overview It is appropriate for the device to use the 28-TSSOP (0.173, 4.40mm Width)package.The item is packaged in a Tape & Reel (TR) case.The component is installed according to Surface Mount.The device is capable of supplying 2.7V~6.5V volts.A TDA8023can be used to identify related parts.It has 28terminations.You should set this device to 3.3V.Operation is carried out using the 28pins.Potentiometers conduct at supply voltages of 85°C.The component was designed to operate at a minimum temperature of -40°C. TDA8023TT/C1,118 Features It is based on TDA8023. Set the part at 3.3V volts TDA8023TT/C1,118 Applications There are a lot of NXP USA Inc. TDA8023TT/C1,118 Specialized Interface ICs applications. Communication systems High-Voltage Industrial and process control systems Voice over IP/DSL – Integrated Access Devices, Smart Relay replacements Audio signal routing Access Concentrators Avionics and Military Systems E1 Network Equipment Communication systems	PDF	999 In-stock	Get Quote
815-TCA8424RHAR	Texas Instruments	TCA8424RHAR Overview It fits well with the package [0].It comes in a case with a [0].Surface Mountis used to install this component.The device is capable of supplying voltages of 1.65V~3.6V volts.By using the [0], it is possible to find parts that are related.There are 40 terminations on it.Keep in mind that this device should be set to 1.8V.A total of 40pins are located on it.By [0], it is mounted.It is designed to work at a minimum working temperature of -40°C to ensure reliability.By setting the value of 85°Cto the maximum, this ensures that the part will run consistently.This device is equipped with a telecom IC type of TELECOM CIRCUIT. TCA8424RHAR Features It is based on TCA8424. Set the part at 1.8V volts Telecom IC Type : TELECOM CIRCUIT TCA8424RHAR Applications There are a lot of Texas Instruments TCA8424RHAR Specialized Interface ICs applications. E1 Multiplexer (FTTH) Automotive applications ?Microwave transmission systems High-Voltage ?Cable Telephony – NIU, Set-Top Box, Home Side Box, Medical/Industrial Microprocessor controlled systems Multi-Line E1 Interface Cards USB 1.1 signal switching circuits	PDF	999 In-stock	Get Quote
815-DS38EP100SD/NOPB	Texas Instruments	DS38EP100SD/NOPB Overview The 6-WDFN Exposed Padpackage would be a good match for it.The package contains a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.The component applied in Displaysis appropriate.Based on the [0], related parts can be found.A total of 6terminations have been recorded.It has a total of 6pins.The unit is mounted on Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].When 85°Cis the maximum value, the part will run consistently.The electronic components belong to the Other Telecom ICs family.LINE EQUALIZERis the telecom IC type used in the device. DS38EP100SD/NOPB Features It is based on DS38EP100. Telecom IC Type : LINE EQUALIZER DS38EP100SD/NOPB Applications There are a lot of Texas Instruments DS38EP100SD/NOPB Specialized Interface ICs applications. Access Concentrators Battery-powered systems ?Central office or PBX (Private Branch Exchange) E1 Network Equipment Precision data acquisition PBXs Audio signal routing Medical Instrumentation Audio and video signal routing Precision test equipment	PDF	999 In-stock	Get Quote
815-TUSB320RWBR	Texas Instruments	TUSB320RWBR Overview The 12-XFQFNpackage would be a good match for it.The item is packaged in a Tape & Reel (TR) case.The component is installed according to Surface Mount.The component applied in USBis appropriate.Devices that are capable of supplying 2.7V~5Vvolts may be used.The TUSB320can be used to locate related parts.A total of 12terminations have been recorded.It is important to keep in mind that this device should be set to 3.5V.There are a total of 12 pins on it.It is mounted on Surface Mount.It operates at a minimum working temperature of -40°C to ensure reliability.In addition to ensuring the consistency of the part, 85°Cis the maximum value possible. TUSB320RWBR Features It is based on TUSB320. Set the part at 3.5V volts TUSB320RWBR Applications There are a lot of Texas Instruments TUSB320RWBR Specialized Interface ICs applications. PBXs E1 Multiplexer Cross Connects Automatic test equipment Isolation USB 1.1 signal switching circuits Data switching High speed data transmission line cards (FTTH) Digital cross connects (DSX-1)	PDF	999 In-stock	Get Quote
815-TUSB322IRWBR	Texas Instruments	TUSB322IRWBR Overview It fits well with the package [0].The package contains a Tape & Reel (TR) case.Surface Mountis used to install this component.In this case, it is appropriate for the component applied in USB.A device capable of providing 4.5V~5.5V volts is available.By using the [0], it is possible to find parts that are related.In total, there are 12terminations.It is important to note that this device should be set to 5V.In total, it contains 12pins.The device is mounted by Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].In order to maintain consistency, a maximum value of 85°Cis recommended.There are a total of 1 ports on the device.Interface ICs for this part are categorized as INTERFACE CIRCUIT. TUSB322IRWBR Features It is based on TUSB322. Set the part at 5V volts Interface IC Type : INTERFACE CIRCUIT TUSB322IRWBR Applications There are a lot of Texas Instruments TUSB322IRWBR Specialized Interface ICs applications. ATM and Frame Relay Equipment Digital Cross-Connects Access Concentrators Optical Applications Cross Connects Audio/video switches ?Microwave transmission systems Multi-Line E1 Interface Cards Audio and video routing Residential Gateways, Home Gateway/Router	PDF	999 In-stock	Get Quote
318-PCA9541APW/01,118	NXP Semiconductors	PCA9541APW/01,118 Overview It's a good fit for the 16-TSSOP (0.173, 4.40mm Width) package.It comes in a case with a [0].The component is installed according to Surface Mount.2-Channel I2C Multiplexerapplies to this component.Devices that are capable of supplying 2.3V~5.5Vvolts may be used.Using the PCA9541can help you find related parts.Operation is performed through the 16pins. PCA9541APW/01,118 Features It is based on PCA9541. PCA9541APW/01,118 Applications There are a lot of NXP USA Inc. PCA9541APW/01,118 Specialized Interface ICs applications. Avionics test equipment Microprocessor controlled systems SONET/SDH and PDH Multiplexers Battery-powered systems Low-Voltage DSLAMs Short/Medium Loop: approximately 2000 ft. of 26 AWG, Video signal routing Automotive applications Mechanical reed relay replacement	PDF	999 In-stock	Get Quote
318-UJA1066TW/5V0/T,51	NXP Semiconductors	UJA1066TW/5V0/T,51 Overview The 32-TSSOP (0.240, 6.10mm Width) Exposed Padpackage would be a good match for it.A case of Tape & Reel (TR)is provided.In the way of [0], this component is installed.Networkingapplies the component appropriately.Devices that are capable of supplying 3.3V~5Vvolts may be used.Based on the [0], related parts can be found.For operation, 32pins are used. UJA1066TW/5V0/T,51 Features It is based on UJA1066. UJA1066TW/5V0/T,51 Applications There are a lot of NXP USA Inc. UJA1066TW/5V0/T,51 Specialized Interface ICs applications. Avionics test equipment Digital Cross-Connects Transmit and Communication systems Industrial control systems ?Microwave transmission systems ?Remote wireless modules Microprocessor controlled systems Power routing USB 1.1 signal switching circuits	PDF	999 In-stock	Get Quote
318-PCA9541APW/01,112	NXP Semiconductors	PCA9541APW/01,112 Overview It is appropriate for the device to use the 16-TSSOP (0.173, 4.40mm Width)package.It is packaged in a Tube case.This component is installed in the way of Surface Mount.This component applies to 2-Channel I2C Multiplexer.A device capable of providing 2.3V~5.5V volts is available.The PCA9541can be used to locate related parts.Operation is performed through the 16pins. PCA9541APW/01,112 Features It is based on PCA9541. PCA9541APW/01,112 Applications There are a lot of NXP USA Inc. PCA9541APW/01,112 Specialized Interface ICs applications. DVD-R Communication systems Short/Medium Loop: approximately 2000 ft. of 26 AWG, Channelized and Unchannelized DS3 applications Battery Powered Instruments ATM and Frame Relay Equipment Relay replacements High-Voltage ?Remote wireless modules Relay Replacement	PDF	999 In-stock	Get Quote
815-LM8327JGR8X/NOPB	Texas Instruments	LM8327JGR8X/NOPB Overview This fits nicely with the 36-VFBGA package.It is packaged in a Tape & Reel (TR) case.Surface Mountis used to install this component.This component is suitable for the application in Mobile Communications.It is possible to find devices that supply 1.62V~1.98V volts.The LM8327can be used to find related parts.A total of 36terminations have been recorded.A total of 36pins are located on it.Operation is carried out through the 36pins.It is mounted by Surface Mount.In order to ensure reliability, the unit works at a minimum working temperature of [0].When the value is set to [0], the part will run consistently.To sort a component based on its consumer IC type, CONSUMER CIRCUITshould be used. LM8327JGR8X/NOPB Features It is based on LM8327. LM8327JGR8X/NOPB Applications There are a lot of Texas Instruments LM8327JGR8X/NOPB Specialized Interface ICs applications. SONET/SDH and PDH Multiplexers Avionics test equipment Sample-and-hold systems Relay replacements Cable Modem, Cable PC ?Digital access cross connects Video switching Battery Powered Instruments RGB switches PCMCIA cards	PDF	999 In-stock	Get Quote
815-DS80EP100SD/NOPB	Texas Instruments	DS80EP100SD/NOPB Overview This fits nicely with the 6-WDFN Exposed Pad package.It is packaged in a Tape & Reel (TR) case.This component is installed in the way of Surface Mount.Displaysapplies the component appropriately.A DS80EP100can be used to identify related parts.The number of terminations is 6.A total of 6pins are located on it.It is mounted on Surface Mount.It is designed to work at a minimum working temperature of -40°C to ensure reliability.As long as the maximum value is [0], the part runs consistently.Electronic components are of the Other Telecom ICsfamily.The device uses the telecom IC type of LINE EQUALIZER. DS80EP100SD/NOPB Features It is based on DS80EP100. Telecom IC Type : LINE EQUALIZER DS80EP100SD/NOPB Applications There are a lot of Texas Instruments DS80EP100SD/NOPB Specialized Interface ICs applications. ?Microwave transmission systems Voice over IP/DSL – Integrated Access Devices, Smart Communication systems HDTV Medical Instrumentation Compatible with 65 V DACs and ADCs such as Audio and video routing MP3 players SONET/SDH and PDH Multiplexers Existing multiplexer applications (both fault-protected and	PDF	999 In-stock	Get Quote
815-TIC12400QDCPRQ1	Texas Instruments	TIC12400QDCPRQ1 Overview The 38-TFSOP (0.173, 4.40mm Width) Exposed Padpackage fits the device well.There is a Tape & Reel (TR)case included with it.This component is installed in the way of Surface Mount.Automotive, Switch Monitoringapplies to this component.The device is capable of supplying 4.5V~35V volts.Based on the [0], it is possible to locate related parts.There are 38 terminations on it.It has a total of 38pins.A minimum working temperature of -40°Cis required to ensure the reliability of the unit.In addition to ensuring the consistency of the part, 150°Cis the maximum value possible.Electronic parts in the Automotive, AEC-Q100series are included in this part.A digital IC POWER SUPPLY SUPPORT CIRCUITis employed in this device.There are 1 channels on the device.To operate, there are 24inputs. TIC12400QDCPRQ1 Features It is based on TIC12400. Other Analog IC Type : POWER SUPPLY SUPPORT CIRCUIT TIC12400QDCPRQ1 Applications There are a lot of Texas Instruments TIC12400QDCPRQ1 Specialized Interface ICs applications. Communication systems DSLAMs E1 Multiplexer Battery-powered systems Switching Systems Access Concentrators High-Voltage Precision data acquisition High reliability control systems Short/Medium Loop: approximately 2000 ft. of 26 AWG,	PDF	9694 In-stock	Get Quote