Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | TPS2376PW OverviewEmbedded in the Tube package, it is used by many applications.It is packaged in the way of 8-TSSOP (0.173, 4.40mm Width).Controller (PD) is the type of PoE controller.It has been reported that the number of channels is growing strongly/weakly: 1.In order to ensure its reliability, PoE operates at the operating temperature of -40°C~85°C.In this electrical Po E controller, the voltage of the supply is 0V~57V.Base part numbers TPS2376 can be used to establish Po E controllers.In a 8 termination, the transmission line is terminated with a power over ethernet controller that matches its characteristic impedance.Power can be reached by this electrical ethernet over power controller at a maximum of 12.95W Watts.8 pins are equipped with it.As Po E controller of Power Management Circuits, this Po E controller is included.It is designed with 8 pins.There is a peak reflow temperature (Cel) of this electrical ethernet power controller that is 260 degrees Celsius.The supply voltage should be greater than 48V.0.45mA reaches its maximum current (Isup).240μA requires a supply current to function correctly.Because of its output current, 350mA is able to provide maximum design flexibility.In this case, 1Ohm (*) represents the resistance of the PoE controller. TPS2376PW FeaturesTube package 8 pin count 8 pins The output current of 350mA 1Ohm (Ω) TPS2376PW ApplicationsThere are a lot of Texas Instruments TPS2376PW Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS23756PWPR OverviewThe Tape & Reel (TR) package contains it.It is packaged in a way that resembles 20-PowerTSSOP (0.173, 4.40mm Width).PoE controllers of this type are called Controller (PD), DC/DC.There is an increase in the number of channels strong/weak as follows: 1.Reliability is ensured by operating PoE at -40°C~125°C.This electrical Po E controller operates at voltage 0V~57V.Using the base part number of a part TPS23756, it is possible to determine its Po E controllers.A 20 termination corresponds to the practice of terminating a transmission line with an impedance-matching power over ethernet controller.It is equipped with 20 pin count.Po E controller Switching Regulator or Controllers includes this component.The 20 pins are designed into it.During the reflow process of this electrical ethernet power controller, Cel (peak reflow temperature) reaches 260.For 920μA to be able to fully perform its function, a supply current needs to be provided.In this electrical PoE power over ethernet controller, 278kHz is the maximum switching frequency.57V is the maximum input voltage of this electrical power over ethernet PoE controller.An power over ethernet devices of this type requires a minimal input voltage of 5.8V. TPS23756PWPR FeaturesTape & Reel (TR) package 20 pin count 20 pins TPS23756PWPR ApplicationsThere are a lot of Texas Instruments TPS23756PWPR Power Over Ethernet (PoE) Controllers applications.
|
2
In-stock
|
Get Quote | |||
Texas Instruments | TPS2373-4RGWR OverviewIt is included in the Tape & Reel (TR) package.In this case, it is packaged in the same way as 20-VQFN Exposed Pad.The type of this PoE controller is Controller (PD).Channel number is growing strong/weak: 1.For a reliable operation, -40°C~125°C is the PoE operating temperature.There is a voltage of 0V~57V that is used for the supply voltage of this electrical Po E controller.A base part number TPS2373 can be used to identify its Po E controllers according to that number.A 20 termination involves terminating a transmission line with a power over ethernet controller whose characteristic impedance matches the line's.It is capable of producing 90W Watts of power at its maximum.Supply current is equal to 20mA.The board has 20 pins.There is a peak reflow temperature of this electric ethernet power controller (Cel) of NOT SPECIFIED degrees Celsius.The supply voltage should be greater than 10.1V.It reaches 57V when the maximal current (Vsup) supplied to it for its operation reaches its maximum value.When the minimal current (Vsup) required for its operation reaches 8V, then it is ready to operate. TPS2373-4RGWR FeaturesTape & Reel (TR) package 20 pins TPS2373-4RGWR ApplicationsThere are a lot of Texas Instruments TPS2373-4RGWR Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS2373-3RGWR OverviewAs part of the Tape & Reel (TR) package, PoE controller is embedded.It is packaged in a way that resembles 20-VQFN Exposed Pad.PoE controller type Controller (PD).Channel number is growing strong/weak: 1.For a reliable operation, -40°C~125°C is the PoE operating temperature.This electrical Po E controller requires a voltage supply of 0V~57V to operate.The base part number TPS2373 determines the Po E controllers.A 20 termination involves terminating a transmission line with a power over ethernet controller whose characteristic impedance matches the line's.Power can be reached by this electrical ethernet over power controller at a maximum of 60W Watts.There is a supply current of 20mA in the system.There should be a greater voltage at the supply than at 10.1V.When Vsup reaches 57V, the maximum current is supplied for its operation.In order for this PoE ethernet controller to function, a minimal current (Vsup) of 8V is required for its operation. TPS2373-3RGWR FeaturesTape & Reel (TR) package TPS2373-3RGWR ApplicationsThere are a lot of Texas Instruments TPS2373-3RGWR Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS23757PWR OverviewThere is an embedded version of it in the Tape & Reel (TR) package.20-TSSOP (0.173, 4.40mm Width) is how it's packaged.I would like to inform you that this PoE controller is of the Controller (PD), DC/DC type.Channel growth is strong or weak: 1.In order to ensure PoE reliability, it is designed to operate at a temperature of -40°C~125°C.Electricity is supplied to this Po E controller by voltage 0V~57V.Using the base part number of a part TPS23757, it is possible to determine its Po E controllers.It is possible to terminate a transmission line with a 20 termination by connecting a power over ethernet controller with a matching impedance to the transmission line.20 pins are equipped with it.920μA is the amount of supply current that is available.The Po E controller in question is included in the package Switching Regulator or Controllers.The board has 20 pins.In the case of this electrical ethernet power controller, the peak reflow temperature (Cel) is 260 degrees Celsius.278kHz is the maximum switching frequency of this electrical PoE power over ethernet controller.There is a maximum input voltage of 57V for this electrical power over ethernet PoE controller.This power over the ethernet controller's maximum voltage output is 0.535A.This power over ethernet devices's minimal input voltage is 5.8V. TPS23757PWR FeaturesTape & Reel (TR) package 20 pin count 20 pins TPS23757PWR ApplicationsThere are a lot of Texas Instruments TPS23757PWR Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | PD69208T4ILQ-TR OverviewThe package Tape & Reel (TR) includes it as part of PoE controller.Packaged according to 56-VFQFN Exposed Pad.An PoE controller of this type is Controller (PD).Channel growth is strong or weak: 8.Keeping its operating temperature at -40°C~85°C ensures PoE reliability.In this electrical Po E controller, the voltage of the supply is 32V~57V.It has a maximum power of 95W Watts. PD69208T4ILQ-TR FeaturesTape & Reel (TR) package PD69208T4ILQ-TR ApplicationsThere are a lot of Microchip Technology PD69208T4ILQ-TR Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | PM8800A OverviewThe package Tube includes it.It is the way it is packaged that makes it 16-TSSOP (0.173, 4.40mm Width) Exposed Pad.PoE controllers of this type are called Controller (PD), DC/DC.The number of channels is growing strong/weak: 1.In order to maintain reliability, PoE operates at a temperature of -40°C~85°C.This electrical Po E controller operates at voltage 48V.According to the base part number PM8800, its Po E controllers can be founded.It is possible to terminate a transmission line with a 16 termination by connecting a power over ethernet controller with a matching impedance to the transmission line.In addition, it is equipped with a 16 pin count.There are 16 pins on the board that are designed for it.In the case of this electrical ethernet power controller, the peak reflow temperature (Cel) is 260 degrees Celsius.A Surface Mount-axis mount is used.As a requirement for 3mA to function properly, it must be supplied with a current.The operating supply voltage of this PoE controller is 10V. PM8800A FeaturesTube package 16 pin count 16 pins PM8800A ApplicationsThere are a lot of STMicroelectronics PM8800A Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM5071MT-50/NOPB OverviewThe package Tube includes it.In this case, it is packaged in the same way as 16-TSSOP (0.173, 4.40mm Width).An PoE controller of this type is Controller (PD), DC/DC.The number of channels is growing strong/weak: 1.For a reliable operation, -40°C~125°C is the PoE operating temperature.This electrical Po E controller operates at voltage 1.8V~60V.It is possible to find the Po E controllers of the base part number by using the base part number LM5071.In a 16 termination, the transmission line is terminated with a power over ethernet controller that matches its characteristic impedance.This electrical ethernet over power controller has a maximum power of 12.95W Watts, which is the maximum power it can deliver.A Po E controller like this is included in Switching Regulator or Controllers.There are 16 pins on the board that are designed for it.There is a 260 thermal peak of this electrical ethernet power controller (Cel).This PoE ethernet controller is mounted in such a way that it faces Surface Mount.In order for 1.5mA to perform its proper functions, it needs to have a current supply that is adequate.The frequency of this electrical PoE ethernet controller is 1MHz.With 100mA's maximum output current, maximum design flexibility is possible.Its resistance is 2.2Ohm (*), which is its value.This ethernet over power controller has an output power of 13W watts. LM5071MT-50/NOPB FeaturesTube package 16 pins The output current of 100mA 2.2Ohm (Ω) LM5071MT-50/NOPB ApplicationsThere are a lot of Texas Instruments LM5071MT-50/NOPB Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS23841PAP OverviewIt is embedded in the Tray package.It is packaged in the way of 64-PowerTQFP.Controller (PSE) is the type of PoE controller that this is.Channels are growing strong/weak depending on the category: 4.In order to ensure its reliability, PoE operates at the operating temperature of -40°C~125°C.Electricity is supplied to this Po E controller by voltage 21.5V~57V.There is a possibility of determining its Po E controllers by referring to the base part number TPS23841.A 64 termination involves terminating the transmission line with a power over ethernet controller of the same impedance as the line.As far as the maximum power of this electrical ethernet over power controller is concerned, it is 25W Watts.In addition, it comes with a 64 pin count.Taking into account the supply current, 10mA is the value.As Po E controller of Power Management Circuits, this Po E controller is included.This board is designed with 64 pins.There is a 260 thermal peak of this electrical ethernet power controller (Cel).The supply voltage should be greater than 48V.Upon reaching 21.5V, the minimal current (Vsup) required for its operation is reached.At 400kHz frequencies, this electrical PoE ethernet controller operates.700mA features maximum design flexibility due to its output current.PoE controllers operate at 48V volts.As far as the input voltage of this power over ethernet PoE controller is concerned, it has a maximum value of 57V.The minimal input voltage of this power over the ethernet controller is 34V. TPS23841PAP FeaturesTray package 64 pin count 64 pins The output current of 700mA TPS23841PAP ApplicationsThere are a lot of Texas Instruments TPS23841PAP Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS2388RTQT OverviewThere is an embedded version of it in the Tape & Reel (TR) package.There is a way in which it is packaged which is referred to as 56-VFQFN Exposed Pad.Controller (PSE) is the type of PoE controller that this is.Currently, there are a number of channels that are strong or weak: 8.In order to ensure its reliability, PoE operates at the operating temperature of -40°C~125°C TJ.A 3V~3.6V voltage is used to supply power to this electrical Po E controller.Base part numbers TPS2388 can be used to establish Po E controllers.There are 56 terminations, which are the practice of ending a transmission line with a power over ethernet controller that matches the characteristic impedance of the line.There is a maximum power of 670mW Watts that can be generated by this electrical ethernet over power controller.There are 56 pins on the board that are designed for it.There should be a difference between the supply voltage and 48V in the supply voltage.57V is reached when the maximum current (Vsup) supplied for its operation reaches.As soon as it reaches 44V, it receives its minimal supply current (Vsup).The frequency of this electrical PoE ethernet controller is 14MHz.Also, it has ITS ALSO REQUIRED VDD DIGITAL SUPPLY 3-3.6V as a characteristic. TPS2388RTQT FeaturesTape & Reel (TR) package 56 pins TPS2388RTQT ApplicationsThere are a lot of Texas Instruments TPS2388RTQT Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | PD70101ILQ-TR OverviewEmbedded in the Cut Tape (CT) package, it is used by many applications.The packaging is in 32-VFQFN Exposed Pad's style.PoE controller type Controller (PD).There is an increase in the number of channels strong/weak as follows: 1.Reliability is ensured by operating PoE at -40°C~85°C.This electrical Po E controller requires a voltage supply of 0V~57V to operate.According to the base part number PD70*01, its Po E controllers can be founded.It is capable of producing 47.7W Watts of power at its maximum.There is a supply current of 200μA in the system.As you can see, it is designed with 32 pins.This mount is positioned in the way of the Surface Mount axis.The maximum operating temperature of 85°C ensures the reliability of the PoE.Keeping the operating temperature of -40°C as low as possible ensures its reliability. PD70101ILQ-TR FeaturesCut Tape (CT) package 32 pins The maximal operating temperature of 85°C The minimal operating temperature of -40°C PD70101ILQ-TR ApplicationsThere are a lot of Microchip Technology PD70101ILQ-TR Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
STMicroelectronics | PM8801TR OverviewEmbedded in the Tape & Reel (TR) package, it is used by many applications.In other words, 24-TSSOP (0.173, 4.40mm Width) Exposed Pad refers to the way in which it is packaged.PoE controllers of this type are called Controller (PD), DC/DC.Channel number is growing strong/weak: 2.As a precaution, the operating temperature of this Po E controller is kept at -40°C~85°C in order to maintain its reliability.According to the base part number PM8801, its Po E controllers can be founded.Termination with a 24 termination involves terminating a transmission line with a power over ethernet controller of matching impedance.It is estimated that this electrical ethernet over power controller has a maximum power of 25.3W Watts.It amounts to 640mA that the supply current is flowing.The supply voltage should be greater than 48V. PM8801TR FeaturesTape & Reel (TR) package PM8801TR ApplicationsThere are a lot of STMicroelectronics PM8801TR Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS2376PWRG4 OverviewIt is included in the Tape & Reel (TR) package.Packaged in the manner of 8-TSSOP (0.173, 4.40mm Width).PoE controller type Controller (PD).Channels are growing strong/weak depending on the category: 1.As a precaution, the operating temperature of this Po E controller is kept at -40°C~85°C in order to maintain its reliability.Electricity is supplied to this Po E controller by voltage 0V~57V.A base part number TPS2376 can be used to identify its Po E controllers according to that number.A 8 termination corresponds to the practice of terminating a transmission line with an impedance-matching power over ethernet controller.It is capable of producing 12.95W Watts of power at its maximum.With 8 pins, it is equipped.It amounts to 240μA that the supply current is flowing.Power Management Circuits includes this Po E controller in its package.In order to make it work, it has 8 pins on it.The peak reflow temperature (Cel) of this electrical ethernet power controller is 260.The supply voltage should be greater than 48V.It reaches 0.45mA when it receives the maximal current (Isup).57V is reached when the maximum current (Vsup) supplied for its operation reaches. TPS2376PWRG4 FeaturesTape & Reel (TR) package 8 pin count 8 pins TPS2376PWRG4 ApplicationsThere are a lot of Texas Instruments TPS2376PWRG4 Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS2376DDA-HG4 OverviewAs part of the Tube package, PoE controller is embedded.It is packaged in the way of 8-PowerSOIC (0.154, 3.90mm Width).PoE controller is a Controller (PD) type electronic part.The number of channels is growing strong/weak: 1.Ensure the reliability of the PoE by operating it at -40°C~85°C.A 0V~57V voltage is used to supply power to this electrical Po E controller.It is possible to find the Po E controllers of the base part number by using the base part number TPS2376.8 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.Count of 8 pins is included.A Po E controller like this is included in Power Management Circuits.There is a 8 pin design on this board.There is a 260 thermal peak of this electrical ethernet power controller (Cel).48V should be greater than the supply voltage.Upon reaching 0.6mA, Isup reaches its maximal current.For 240μA to perform fully, a supply current must be provided.With its maximum design flexibility, 350mA boasts one of the highest output currents on the market.This PoE controller requires a supply voltage of 57V to function properly.1Ohm (*) represents the PoE controller's resistance.A 12.95W watt power output is achieved by this ethernet over power controller.An power over ethernet controller such as this one produces a voltage of 100V as its output voltage. TPS2376DDA-HG4 FeaturesTube package 8 pin count 8 pins The output current of 350mA 1Ohm (Ω) TPS2376DDA-HG4 ApplicationsThere are a lot of Texas Instruments TPS2376DDA-HG4 Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS23752PWPR OverviewEmbedded in the Tape & Reel (TR) package, it is used by many applications.It is packaged in the way of 20-PowerTSSOP (0.173, 4.40mm Width).As far as this application is concerned, it is a Controller (PD), DC/DC type PoE controller that is being used.Currently, there are a number of channels that are strong or weak: 1.PoE operates with the operating temperature of -40°C~85°C to ensure its reliability.Electricity is supplied to this Po E controller by voltage 0V~57V.According to the base part number TPS23752, its Po E controllers can be founded.20 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.During normal operation, this electrical ethernet over power controller will produce 25.5W Watts of power.There is a supply current of 1.8mA in the system.As Po E controller of Switching Regulator or Controllers, this Po E controller is included.The 20 pins are designed into it.During reflowing of the electrical ethernet power controller, the peak temperature (Cel) reaches 260 °C.There should be a difference between the supply voltage and 48V in the supply voltage.Upon reaching 0.85mA, Isup reaches its maximal current.This electrical PoE power over ethernet controller has a maximal switching frequency of 276kHz, and that is its maximum switching frequency.Its maximum input voltage is 57V. TPS23752PWPR FeaturesTape & Reel (TR) package 20 pins TPS23752PWPR ApplicationsThere are a lot of Texas Instruments TPS23752PWPR Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS2376DDAR-HG4 OverviewIt is included in the Tape & Reel (TR) package.In other words, 8-PowerSOIC (0.154, 3.90mm Width) refers to the way in which it is packaged.Controller (PD) is the type of PoE controller that this is.The number of channels is growing strong/weak: 1.For the sake of ensuring the reliability of the Po E controller, it functions at a temperature of -40°C~85°C.A 0V~57V voltage is used to supply power to this electrical Po E controller.Base part numbers TPS2376 can be used to establish Po E controllers.In a 8 termination, a transmission line is terminated with an impedance-matched power over ethernet controller.As far as the maximum power of this electrical ethernet over power controller is concerned, it is 12.95W Watts.In addition, it comes with a 8 pin count.Supply current is equal to 240μA.The Po E controller in question is included in the package Power Management Circuits.In order to make it work, it has 8 pins on it.The peak reflow temperature (Cel) of this electrical ethernet power controller is 260.The supply voltage should be greater than 48V.The maximum current that can be provided for its operation (Isup) is reached at 0.6mA.350mA is a flexible design because of its high output current. TPS2376DDAR-HG4 FeaturesTape & Reel (TR) package 8 pin count 8 pins The output current of 350mA TPS2376DDAR-HG4 ApplicationsThere are a lot of Texas Instruments TPS2376DDAR-HG4 Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS23750PWPRG4 OverviewThe Tape & Reel (TR) package contains it.Packaged according to 20-PowerTSSOP (0.173, 4.40mm Width).In this application, it is an PoE controller that is of the Controller (PD), DC/DC type.It has been reported that the number of channels is growing strongly/weakly: 1.Keeping its operating temperature at -40°C~85°C ensures PoE reliability.This electrical Po E controller operates at voltage 0V~67V.A part number's Po E controllers of TPS23750 can be determined by its base number.A 20 termination corresponds to the practice of terminating a transmission line with an impedance-matching power over ethernet controller.During normal operation, this electrical ethernet over power controller will produce 12.95W Watts of power.There is a pin count of 20 on this ethernet over power controller.There is a current of supply amounting to 2mA.As Po E controller of Switching Regulator or Controllers, this Po E controller is included.It is designed with 20 pins.A transistor has a peak reflow temperature (Cel) of 260.The supply voltage should be greater than 48V.0.85mA reaches its maximum current (Isup).In this electrical PoE ethernet controller, the frequency is 487kHz.28mA features a maximum degree of design flexibility due to the high output current it features. TPS23750PWPRG4 FeaturesTape & Reel (TR) package 20 pin count 20 pins The output current of 28mA TPS23750PWPRG4 ApplicationsThere are a lot of Texas Instruments TPS23750PWPRG4 Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS2375DRG4 OverviewAs part of the Tape & Reel (TR) package, PoE controller is embedded.In other words, 8-SOIC (0.154, 3.90mm Width) refers to the way in which it is packaged.I would like to inform you that this PoE controller is of the Controller (PD) type.Channel number is growing strong/weak: 1.In order to ensure its reliability, PoE operates at the operating temperature of -40°C~85°C.In order to operate this electrical Po E controller, it requires a voltage of 0V~57V as a supply voltage.An associated part can be established based on the base part number TPS2375.Termination with a 8 termination involves terminating a transmission line with a power over ethernet controller of matching impedance.It is equipped with 8 pin count.Power Management Circuits includes this Po E controller in its package.As you can see, it is designed with 8 pins.During reflowing of the electrical ethernet power controller, the peak temperature (Cel) reaches 260 °C.There should be more voltage supplied than 48V.It reaches 0.45mA when the maximal current (Isup) supplied for it to operate is reached.To work properly, 240μA needs to receive supply current.With its maximum design flexibility, 350mA boasts one of the highest output currents on the market.It is important to note that the operating supply voltage of this PoE controller is 57V.A resistance of 1Ohm (*) is measured on this PoE controller.There is a power output of 12.95W for this ethernet over power controller. TPS2375DRG4 FeaturesTape & Reel (TR) package 8 pin count 8 pins The output current of 350mA 1Ohm (Ω) TPS2375DRG4 ApplicationsThere are a lot of Texas Instruments TPS2375DRG4 Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TPS2375PWR-1G4 OverviewEmbedded in the Tape & Reel (TR) package, it is used by many applications.It is packaged in the way of TSSOP.The number of channels is growing strong/weak: 1.8 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.There are 8 pins on it.A Po E controller like this is included in Power Management Circuits.There is a 8 pin design on this board.There is a 260 thermal peak of this electrical ethernet power controller (Cel).It is necessary to have a greater voltage than 48V in the supply.For reliable operation, it is operated at a maximum operating temperature of 85°C.A minimum operating temperature of -40°C is required to ensure the reliability of the PoE. TPS2375PWR-1G4 FeaturesTape & Reel (TR) package 8 pin count 8 pins The maximal operating temperature of 85°C The minimal operating temperature of -40°C TPS2375PWR-1G4 ApplicationsThere are a lot of Texas Instruments TPS2375PWR-1G4 Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | TPS2375PWG4 OverviewThe packaging is in TSSOP's style.The number of channels is growing strong/weak: 1.8 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.The ethernet over power controller has 8 pins.A Po E controller like this is included in Power Management Circuits.The 8 pins are designed into it.In the case of this electrical ethernet power controller, the peak reflow temperature (Cel) is 260 degrees Celsius.There should be more voltage supplied than 48V.For 240μA to fully function, the supply current must be provided.In this case, 1Ohm (*) is the value of its resistance.This power over ethernet PoE controller can be powered up to 57V volts.For reliable operation, it is operated at a maximum operating temperature of 85°C.To ensure that it operates reliably, it operates at a temperature that is relatively low, namely -40°C. TPS2375PWG4 Features8 pin count 8 pins 1Ohm (Ω) The maximal operating temperature of 85°C The minimal operating temperature of -40°C TPS2375PWG4 ApplicationsThere are a lot of Texas Instruments TPS2375PWG4 Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | HPA01043PWPR OverviewAs part of the Tape & Reel (TR) package, PoE controller is embedded.It is possible to find the Po E controllers of the base part number by using the base part number HPA01043.20 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.It is designed with 20 pins.The peak reflow temperature (Cel) of this electrical ethernet power controller is 260.There is a maximum switching frequency of 278kHz for this electrical PoE power over ethernet controller.An electrical power over ethernet PoE controller like this can handle a maximum input voltage of 57V.It is important to note that this power over the ethernet controller has a maximum voltage output of 1.1A. HPA01043PWPR FeaturesTape & Reel (TR) package 20 pins HPA01043PWPR ApplicationsThere are a lot of Texas Instruments HPA01043PWPR Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | HPA01124PWPR OverviewAs part of Tape & Reel (TR), PoE controller is embedded.A base part number HPA01124 can be used to identify its Po E controllers according to that number.In a 20 termination, the transmission line is terminated with a power over ethernet controller that matches its characteristic impedance.20 pins are used in the design of this board.There is a peak reflow temperature (Cel) of this electrical ethernet power controller that is 260 degrees Celsius.There is a maximum switching frequency of 278kHz for this electrical PoE power over ethernet controller.Its maximum input voltage is 57V.Using this power over the ethernet controller, you can achieve a maximum voltage output of 1.1A. HPA01124PWPR FeaturesTape & Reel (TR) package 20 pins HPA01124PWPR ApplicationsThere are a lot of Texas Instruments HPA01124PWPR Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS2375PWR-1G4 OverviewEmbedded in the Tape & Reel (TR) package, it is used by many applications.It is packaged in the way of TSSOP.The number of channels is growing strong/weak: 1.8 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.There are 8 pins on it.A Po E controller like this is included in Power Management Circuits.There is a 8 pin design on this board.There is a 260 thermal peak of this electrical ethernet power controller (Cel).It is necessary to have a greater voltage than 48V in the supply.For reliable operation, it is operated at a maximum operating temperature of 85°C.A minimum operating temperature of -40°C is required to ensure the reliability of the PoE. TPS2375PWR-1G4 FeaturesTape & Reel (TR) package 8 pin count 8 pins The maximal operating temperature of 85°C The minimal operating temperature of -40°C TPS2375PWR-1G4 ApplicationsThere are a lot of Texas Instruments TPS2375PWR-1G4 Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS2375PWG4 OverviewThe packaging is in TSSOP's style.The number of channels is growing strong/weak: 1.8 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.The ethernet over power controller has 8 pins.A Po E controller like this is included in Power Management Circuits.The 8 pins are designed into it.In the case of this electrical ethernet power controller, the peak reflow temperature (Cel) is 260 degrees Celsius.There should be more voltage supplied than 48V.For 240μA to fully function, the supply current must be provided.In this case, 1Ohm (*) is the value of its resistance.This power over ethernet PoE controller can be powered up to 57V volts.For reliable operation, it is operated at a maximum operating temperature of 85°C.To ensure that it operates reliably, it operates at a temperature that is relatively low, namely -40°C. TPS2375PWG4 Features8 pin count 8 pins 1Ohm (Ω) The maximal operating temperature of 85°C The minimal operating temperature of -40°C TPS2375PWG4 ApplicationsThere are a lot of Texas Instruments TPS2375PWG4 Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TPS23750PWPG4 OverviewHTSSOP EP is how it's packaged.A 20 termination involves terminating a transmission line with a power over ethernet controller whose characteristic impedance matches the line's.There are 20 pins on it.Po E controller Switching Regulator or Controllers includes this component.20 pins are used in the design of this board.During reflowing of the electrical ethernet power controller, the peak temperature (Cel) reaches 260 °C.To work properly, 1.1mA needs to receive supply current.This electrical PoE power over ethernet controller has a maximal switching frequency of 565kHz, and that is its maximum switching frequency.This PoE controller operates at 67V volts.There is a resistance of 1Ohm (*) on this PoE controller.To ensure the reliability of the system, it operates with a maximum operating temperature of 85°C.Keeping the operating temperature of -40°C as low as possible ensures its reliability. TPS23750PWPG4 Features20 pin count 20 pins 1Ohm (Ω) The maximal operating temperature of 85°C The minimal operating temperature of -40°C TPS23750PWPG4 ApplicationsThere are a lot of Texas Instruments TPS23750PWPG4 Power Over Ethernet (PoE) Controllers applications.
|
999
In-stock
|
Get Quote | |||
SHARP/Socle Technology | Reflective Optical Sensor 0.079" ~ 0.866" (2mm ~ 22mm) ADJ Black Paper, Kodak® Gray Card, White Paper Module, Connector |
2798
In-stock
|
Get Quote | |||
American Bright Optoelectronics Corporation | Reflective Optical Sensor White Paper Module |
15
In-stock
|
Get Quote | |||
Omron Automation and Safety | Optical Sensor |
2015
In-stock
|
Get Quote | |||
Omron Automation and Safety | Reflective Optical Sensor 0.314" ~ 0.787" (8mm ~ 20mm) ADJ |
1
In-stock
|
Get Quote | |||
Broadcom Limited | Reflective Optical Sensor 0.039" (1mm) Codewheel/Codestrip 8-SMD, No Lead |
9674
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.