My CartPhoto Detectors - CdS Cells(2332)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Texas Instruments | BQ24007RGWR OverviewThe package Cut Tape (CT) contains it, and you can find it there.In order to make it more convenient, it has been included in the 20-VQFN Exposed Pad package.There is a type of mounting for this device: Surface Mount.It is best to set the temperature to -40°C~70°C TA.It uses an analog integrated circuit of type POWER SUPPLY SUPPORT CIRCUIT.For the device to be charged, there is Constant current required.Identify its related parts based on the base part number BQ24007.The number of terminations found in it is 20 as a whole.It is 4.2V for the battery pack.It is equipped with 20 pins.In addition to Current, Timer, a variety of programmable features are available.In order for the product to function as intended, there are 20 pins that must be connected.It is possible to access 1 channels.Using a 5V battery should be enough to run it.A supply voltage of no more than 10V is required for the device to operate properly.In the case of a 4.2V output voltage, high efficiency is possible.1.2A is the output current during the operation.Devices belonging to subcategory Power Management Circuits include this device.It is capable of functioning at a voltage as low as possible, for example 4.5V voltage for this circuit is used.There is a minimum input voltage of 4.5V volts.Additionally, OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE can be generated by the device. BQ24007RGWR FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory Addtional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE 20-VQFN Exposed Pad package BQ24007RGWR ApplicationsThere are a lot of Texas Instruments BQ24007RGWR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM3620M5-8 OverviewIt is contained in the package Cut Tape (CT).A SC-74A, SOT-753 package is included with this item as part of its contents.Device mounting type Surface Mount is specified.A temperature setting of 0°C~70°C TA ensures reliable performance.This device makes use of an analog IC of BATTERY CHARGE CONTROLLER.With the base part number LM3620, it is possible to find related parts.In general, the number of terminations found within it is 5 as a whole.For the battery pack, it is set to 8.4V.Its maximum supply voltage is 30V.A 8.2V output voltage provides high efficiency.The device has 5V voltage input at the moment.A voltage of 4V volts is the minimal input voltage.There is 30V maximum input voltage for this device. LM3620M5-8 FeaturesBattery pack voltage of 8.4V SC-74A, SOT-753 package LM3620M5-8 ApplicationsThere are a lot of Texas Instruments LM3620M5-8 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM3622M-4.1/NOPB OverviewIt is included in the Tube package for convenience.In order to make it more convenient, it has been included in the 8-SOIC (0.154, 3.90mm Width) package.It appears that the device's mounting type is Surface Mount.The temperature should be set to -20°C~70°C TA to ensure reliable performance.There is an analog IC of BATTERY CHARGE CONTROLLER used in this device.To charge the device, a current of Constant is required.A list of related parts can be found by searching for the base part number LM3622.The number of terminations found in it is 8 as a whole.For the battery pack, it is set to 4.1V.In addition, it is equipped with 8 pins.Devices require 24V as their maximum supply voltage.The device falls under the Power Management Circuits subcategory.Aligning it with Surface Mount is required for mounting.5V is the input voltage for the device.The minimal input voltage is 4.5V volts.24V is its maximum input voltage. LM3622M-4.1/NOPB FeaturesBattery pack voltage of 4.1V Power Management Circuits subcategory 8-SOIC (0.154, 3.90mm Width) package LM3622M-4.1/NOPB ApplicationsThere are a lot of Texas Instruments LM3622M-4.1/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | U2403B-MFPG3 OverviewThe Tape & Reel (TR) package contains it.With this item, there is a 8-SOIC (0.154, 3.90mm Width) package that comes with it.Surface Mount is the mounting type of the device.This is the right thing to do: set the temperature to -10°C~150°C TJ.Charge the device by supplying it with Constant current.If you use the base part number U2403B, you can look for related parts.Devices have a maximum supply voltage of 13.7V.There is a supplier package of type 8-SOIC for this product. U2403B-MFPG3 Features8-SOIC (0.154, 3.90mm Width) package U2403B-MFPG3 ApplicationsThere are a lot of Microchip Technology U2403B-MFPG3 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM3420AM5X-8.4 OverviewThere is a package for Tape & Reel (TR) in which it can be found.An included version of it is available in the package SC-74A, SOT-753.The device is mounted with mounting type Surface Mount.Keeping the temperature at -40°C~85°C TA is the right choice.It uses an analog integrated circuit of type POWER SUPPLY SUPPORT CIRCUIT.The base part number LM3420 can be used to locate related parts for this device.It contains a total of 5 terminations.There is a setting of 8.4V for the battery pack.5 pins are on it in total.The device has a maximum charging current of 1A.Currently, there are a total of 1 channels available for use in the application.In general, it is recommended to use devices with 20V maximum supply voltages.Batteries with a 8.4V voltage are compatible with it. LM3420AM5X-8.4 FeaturesBattery pack voltage of 8.4V 1 channels SC-74A, SOT-753 package LM3420AM5X-8.4 ApplicationsThere are a lot of Texas Instruments LM3420AM5X-8.4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73861-I/MLG OverviewThere is a version of it included in the package Tube.The package 16-VQFN Exposed Pad includes a version of it.It appears that the device's mounting type is Surface Mount.It is best to set the temperature to -40°C~85°C TA in order to prevent the system from overheating.Analog IC POWER SUPPLY SUPPORT CIRCUIT is responsible for implementing the device.For the device to be charged, there is Constant - Programmable current required.There are related parts for this device under the base part number MCP73861.As you can see, it has 16 terminations in it.Batteries pack have 4.2V.Due to the 16 pins on it, it is a very simple circuit.The unit is equipped with a number of programmable features, including Timer.According to the manufacturer, it is rated at 1.38A at maximum charging current.There are 16 pins necessary to make it work.Currently, there are 1 available channels.A supply voltage of no more than 12V is required for the device to operate properly.There is a possibility of high efficiency if the output voltage is set to 4.1V.The operation is performed with an output current of 1.2A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.The device can operate at a voltage of 4.5V as low as possible.4mA is set for Vsup (maximum supply voltage).Current is flowing through the gadget's supply at 530μA volts.There is a maximum input voltage of 12V volts that it can take.It is mandatory to set the voltage at 4.221V for the maximum output supply voltage for this operation. MCP73861-I/MLG FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory 16-VQFN Exposed Pad package MCP73861-I/MLG ApplicationsThere are a lot of Microchip Technology MCP73861-I/MLG Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73862-I/ML OverviewThere is a package named Tube that contains it.The 16-VQFN Exposed Pad package includes it as a convenience.Amounting type Surface Mount is the one associated with the device.It is best to set the temperature to -40°C~85°C TA in order to prevent the system from overheating.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.In order to charge the device, it needs to receive Constant - Programmable current.The base part number MCP73862 can be used to locate related parts for this device.The overall number of terminations that can be found in it is 16 as a whole.Hence, the battery pack is at 8.4V when it comes to voltage.It is equipped with 16 pins.It is possible to program features such as Timer.At the maximum charging current, it has a rating of 1.38A.In order for the product to be functional, it requires that you connect the 16 pins according to the instructions.A total of 2 channels are available.If the supply voltage exceeds 12V, the device will not function properly.With a 8.442V output voltage, high efficiency is possible.There is 1.2A output current when the device operates.Devices belonging to subcategory Power Management Circuits include this device.A supply voltage of 8.7V is suitable for it, because it can operate with a low supply voltage.As far as the mounting is concerned, it is mounted in the way of Surface Mount.A 4mA supply current is set on the gadget. MCP73862-I/ML FeaturesBattery pack voltage of 8.4V 2 channels Power Management Circuits subcategory 16-VQFN Exposed Pad package MCP73862-I/ML ApplicationsThere are a lot of Microchip Technology MCP73862-I/ML Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | LM3655TL/NOPB OverviewThere is a package called Tape & Reel (TR) that contains this item.It comes as part of the 25-WFBGA package.Mounting type for the device is Surface Mount.The temperature should be set to -20°C~70°C TA to ensure reliable performance.Identify its related parts based on the base part number LM3655.In general, the number of terminations found within it is 25 as a whole.The device has a maximum charging current of 1.4A.There are 25 pins necessary to make it work.During operation, 1.2A represents the output current.Subcategory 0 is home to this device.It is mounted in the same way as Surface Mount. LM3655TL/NOPB FeaturesPower Management Circuits subcategory 25-WFBGA package LM3655TL/NOPB ApplicationsThere are a lot of Texas Instruments LM3655TL/NOPB Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73861-I/SLG OverviewYou can find it in the Tube package.There is currently a package available named 16-SOIC (0.154, 3.90mm Width).This device is mounted using type Surface Mount.If you wish to ensure reliable performance, set the temperature to -40°C~85°C TA.POWER SUPPLY SUPPORT CIRCUIT is the analog IC used in this device.Charge the device by providing it with Constant - Programmable current.By using the base part number MCP73861, related parts can be found for this device.It has 16 terminations.This board has 16 pins, making it very simple to construct.Programmable features, such as Timer, are available.The device has a maximum charging current of 1.38A.There are 1 channels available.Devices with a maximum supply voltage of 12V are preferred.Ideally, when the output voltage of the device is set to 4.2V, you will be able to achieve the highest degree of efficiency.With a 1.2A output current, the operation is conducted.This device belongs to the subcategory of Power Management Circuits.In order to ensure optimum supply voltage, the maximum voltage setting is set to 4mA. MCP73861-I/SLG Features1 channels Power Management Circuits subcategory 16-SOIC (0.154, 3.90mm Width) package MCP73861-I/SLG ApplicationsThere are a lot of Microchip Technology MCP73861-I/SLG Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73861-I/ML OverviewIt is included in the Tube package for convenience.It is contained in a package named 16-VQFN Exposed Pad.It appears that the device's mounting type is Surface Mount.Ensure reliable performance by setting the temperature to -40°C~85°C TA.It functions by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you will need to supply it with Constant - Programmable of current.It is possible to find the related parts of this device by looking at its base part number MCP73861.In general, the number of terminations found within it is 16 as a whole.It is a 4.2V voltage for the battery pack.It has a total of 16 pins on it.It is possible to program features such as Timer.On the device, it is listed as having a charge current of 1.38A.In order for the product to function as intended, there are 16 pins that must be connected.It is possible to use a total of 1 channels.In the case of a 4.221V output voltage, high efficiency is possible.The operation is carried out with an output current of 1.2A.Subcategory 0 is home to this device.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.There is 4mA current flowing through the gadget's supply.It is recommended that the supply voltage be set to 12V for maximum efficiency.13.5V is the maximum input voltage it can handle.It is important to keep the power supply voltage (Vsup) above 4.5V so that normal operation can take place.It is required that a maximum supply voltage of 4.121V be applied as the output voltage for this operation. MCP73861-I/ML FeaturesBattery pack voltage of 4.2V 1 channels Power Management Circuits subcategory 16-VQFN Exposed Pad package MCP73861-I/ML ApplicationsThere are a lot of Microchip Technology MCP73861-I/ML Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73863-I/SL OverviewIn the Tube package, you will find it.It can be found in package 16-SOIC (0.154, 3.90mm Width).This device has a mounting type of Surface Mount.If you wish to ensure reliable performance, set the temperature to -40°C~85°C TA.It functions by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Providing Constant - Programmable current to the device is the only way to charge it.A list of related parts can be found by searching for the base part number MCP73863.As you can see, it has 16 terminations in it.In total, it has 16 pins.Timer are a programmable feature.On the device, it is listed as having a charge current of 1.38A.The operation?are 16 pins.Channels are available in an amount of 1.The board is capable of handling a voltage input of zero volts.The 4.2V output voltage allows for high efficiency.In order to operate, an output current of 1.2A is used.There is a subcategory of Power Management Circuits for this device.Using a supply voltage as low as 4.5V will allow it to function.As far as the mounting is concerned, it is mounted in the way of Surface Mount.It was determined during the design process that Vsup (maximum supply voltage) should be set to 4mA.It can take a maximum input voltage of 13.5V volts.Voltage 4.221V is the maximum output voltage needed for this operation. MCP73863-I/SL Features1 channels Power Management Circuits subcategory 16-SOIC (0.154, 3.90mm Width) package MCP73863-I/SL ApplicationsThere are a lot of Microchip Technology MCP73863-I/SL Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ24750RHDT OverviewThere is a package Tape & Reel (TR) available.Located in package 28-VFQFN Exposed Pad, it can be found there.There is a mounting type of Surface Mount for this device.This is the right thing to do: set the temperature to -40°C~125°C TJ.It provides its functionality by using an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT.If the device needs to be charged, it must be supplied with Constant - Programmable current.Identify its related parts based on the base part number BQ24750.As you can see, it has 28 terminations in it.There is a setting of 18.048V Max for the battery pack.Pins 28 are included.As long as it is charged at maximum current, it will be rated as 10A.For it to work, 28 pins are required.This application has a total of 1 channels that can be used.In order to run it, you would need a battery with 20V.24V supply voltage is not a problem for it.In the case of a 2V output voltage, high efficiency is possible.A device of this type will have its output current set to 1mA in this case.At a low supply voltage, such as 5V, it can operate to the best of its ability.Amounting is in line with Surface Mount.In order to comply with the constraints, the maximum output current is reduced to 1mA. BQ24750RHDT FeaturesBattery pack voltage of 18.048V Max 1 channels 28-VFQFN Exposed Pad package BQ24750RHDT ApplicationsThere are a lot of Texas Instruments BQ24750RHDT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ24730RGFR OverviewThere is a package Tape & Reel (TR) available.It can be found in package 40-VFQFN Exposed Pad.Device mounting type Surface Mount is specified.The best thing to do is to set the temperature to -40°C~85°C TA.The functionality of this device is provided by an analog IC called BATTERY CHARGE CONTROLLER.For the device to be charged, there is Constant - Programmable current required.Based on the base part number BQ24730, it is possible to find related parts for this device.Taking it as a whole, it has been concluded that there are 40 terminations to be found.In total, it has 40 pins.Several programmable features, including Current.In order for the product to be functional, it requires that you connect the 40 pins according to the instructions.It is possible to achieve high efficiency by using an output voltage of 16.8V.In order to operate, an output current of 4.5mA is used.As far as the mounting is concerned, it is mounted in the way of Surface Mount.Input voltage is 16.8V.The supply voltage should be set to 24V for best efficiency.Additional features of ALSO OPERATE IN VOLTAGE ADJUSTABLE MODE FROM 12.6 TO 16.8 can also be generated by the device.Input voltage must be at least 8V volts.It is most common to find parts with 345kHz switching frequencies. BQ24730RGFR FeaturesAddtional features of ALSO OPERATE IN VOLTAGE ADJUSTABLE MODE FROM 12.6 TO 16.8 40-VFQFN Exposed Pad package BQ24730RGFR ApplicationsThere are a lot of Texas Instruments BQ24730RGFR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MIC79050-4.2BMM OverviewThere is a package named Tube that contains it.It comes as part of the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The device's mounting type is Surface Mount.Setting the temperature to -40°C~125°C TJ is the right thing to do.Providing Constant Pulsed current to the device is the only way to charge it.There are related parts to this device according to the base part number MIC79050.In the case of the battery pack, it is 4.2V.Ideally, devices with 16V maximum supply voltages should be used.A 8-MSOP supplier package is associated with the device. MIC79050-4.2BMM FeaturesBattery pack voltage of 4.2V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package MIC79050-4.2BMM ApplicationsThere are a lot of Microchip Technology MIC79050-4.2BMM Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MIC79050-4.2BM OverviewIt is available in the package Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it as a convenience.Mounting type Surface Mount matches the device.The temperature should be set to -40°C~125°C TJ to ensure reliable performance.Providing Constant Pulsed current to the device is the only way to charge it.According to the base part number MIC79050, its related parts can be found.There is 4.2V voltage in the battery pack.Its maximum supply voltage is 16V.There is 8-SOIC supplier package for this device. MIC79050-4.2BM FeaturesBattery pack voltage of 4.2V 8-SOIC (0.154, 3.90mm Width) package MIC79050-4.2BM ApplicationsThere are a lot of Microchip Technology MIC79050-4.2BM Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MIC79110-4.2BML-TR OverviewIt is included in the Tape & Reel (TR) package for convenience.An included version of it is available in the package 10-VFDFN Exposed Pad, 10-MLF?.There is a mounting type of Surface Mount for this device.Ensure reliable performance by setting the temperature to -40°C~125°C TJ.This device's related parts can be found under the base part number MIC79110.4.2V is the voltage for the battery pack.A maximum charging current of 1.2A is achieved by the part.Devices with a maximum supply voltage of 16V are preferred.It has the supplier package 10-MLF? (3x3). MIC79110-4.2BML-TR FeaturesBattery pack voltage of 4.2V 10-VFDFN Exposed Pad, 10-MLF? package MIC79110-4.2BML-TR ApplicationsThere are a lot of Microchip Technology MIC79110-4.2BML-TR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73863T-I/ML OverviewIf you are looking for it in the Tape & Reel (TR) package, then you have found it.The 16-VQFN Exposed Pad package includes it as a convenience.The device is mounted with mounting type Surface Mount.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.If the device needs to be charged, it must be supplied with Constant - Programmable current.Based on the base part number MCP73863, its related parts can be identified.It has 16 terminations.The device is equipped with a total of 16 pins.Among the programmable features are Timer.A maximum charging current of 1.38A is achieved by the part.It operates on the basis of 16 pins.Currently, there are 1 channels available.12V supply voltage is not a problem for it.There is a possibility of achieving optimal efficiency when the output voltage of the device is 4.2V.There is 1.2A output current when the device operates.The device you are looking at belongs to the subcategory of Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 4.5V.As far as the mounting is concerned, it is mounted in the way of Surface Mount.It was determined during the design process that Vsup (maximum supply voltage) should be set to 4mA. MCP73863T-I/ML Features1 channels Power Management Circuits subcategory 16-VQFN Exposed Pad package MCP73863T-I/ML ApplicationsThere are a lot of Microchip Technology MCP73863T-I/ML Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73864-I/ML OverviewIt is included in the Tube package for convenience.For convenience, it is included in the 16-VQFN Exposed Pad package.The device is mounted with mounting type Surface Mount.The best way to adjust the temperature is to set it to -40°C~85°C TA.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.To charge the device, you need Constant - Programmable current.By using the base part number MCP73864, related parts can be found for this device.In total, there are 16 terminations.The device consists of 16 pins, which are arranged in a row.This device has a number of programmable features, including Timer.The device indicates 1.38A charging current as its maximum.There are 16 pins necessary to make it work.The number of channels available is 2.Applied input voltage of 12V does not damage the device.8.4V output voltages can result in high efficiency.A 1.2A output current is used for operation.There is one subcategory of this device, and it is Power Management Circuits.This device can work at as low a voltage as possible, such as 8.7V.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.Vsup (maximum supply voltage) is set in the command to 4mA. MCP73864-I/ML Features2 channels Power Management Circuits subcategory 16-VQFN Exposed Pad package MCP73864-I/ML ApplicationsThere are a lot of Microchip Technology MCP73864-I/ML Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MIC79050-4.2BM-TR OverviewYou can find it in the Tape & Reel (TR) package.There is a 8-SOIC (0.154, 3.90mm Width) package included with this item that you will need to take care of.The device's mounting type is Surface Mount.It is recommended that the temperature be set to -40°C~125°C TJ in order to ensure reliable performance.For the device to be charged, there is Constant Pulsed current required.It is possible to find the related parts to the base part number MIC79050.In the battery pack, the voltage is 4.2V.Its maximum supply voltage is 16V.It has the supplier package 8-SOIC. MIC79050-4.2BM-TR FeaturesBattery pack voltage of 4.2V 8-SOIC (0.154, 3.90mm Width) package MIC79050-4.2BM-TR ApplicationsThere are a lot of Microchip Technology MIC79050-4.2BM-TR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | TSM1051CLT OverviewThere is a package Tape & Reel (TR) available.The product comes in the package of a SOT-23-6.This device is mounted using type Surface Mount.A temperature setting of 0°C~85°C TA would be the best thing to do.This device makes use of an analog IC called POWER SUPPLY SUPPORT CIRCUIT in order to provide its functionality.The device cannot be charged without Constant current flowing through it.Parts related to the base part number TSM1051 can be found based on that number.It contains 6 terminations, so that is how many there are.In addition, it is equipped with 6 pins.In order for the product to be functional, it requires that you connect the 6 pins according to the instructions.The system currently provides 1 channels for the user to use.With 5V, you can use a battery to power it.This device can be operated at an input voltage of 12V without being damaged.This device is a member of subcategory Power Management Circuits.This device can work at as low a voltage as possible, such as 2.5V.A mounting requires that it align itself with Surface Mount.It is configured to be 2mA for Vsup (maximum supply voltage).It is set to 5V when it comes to the power supply for the part.It is required that a maximum supply voltage of 14V be applied as the output voltage for this operation.The maximum output current is reduced to 50mA in order to meet the operation conditions. TSM1051CLT Features1 channels Power Management Circuits subcategory SOT-23-6 package TSM1051CLT ApplicationsThere are a lot of STMicroelectronics TSM1051CLT Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73864-I/SL OverviewThere is a package named Tube that contains it.There is a 16-SOIC (0.154, 3.90mm Width) package that comes with this item.There is a mounting type Surface Mount specified for the device.Ensure reliable performance by setting the temperature to -40°C~85°C TA.To charge the device, you need Constant - Programmable current.By using the base part number MCP73864, related parts can be found for this device.For the battery pack, it is 8.4V.The unit is equipped with a number of programmable features, including Timer.At the maximum charging current, it has a rating of 1.38A.There are a total of 16 pins that have to be connected for the product to function correctly.Currently, there are 2 available channels.In this case, the device's maximum supply voltage is 12V.The device can withstand a supply voltage of 12V.High efficiency can be achieved with a 8.4V output voltage.1.2A is the output current during the operation.The device can operate at a voltage of 8.7V as low as possible.A mounting requires that it align itself with Surface Mount.Voltage input can be as low as 12V volts at its maximum.Its supplier package of the device is 16-SOIC.It is important to note that the maximum output supply voltage for this operation must be set to 8.4V.The maximum output current is reduced to 20mA in order to meet the operation conditions.A minimum working temperature of -40°C degrees Celsius is required for reliable operation.Operating temperatures as low as 85°C°C allow for reliable operation. MCP73864-I/SL FeaturesBattery pack voltage of 8.4V 2 channels 16-SOIC (0.154, 3.90mm Width) package MCP73864-I/SL ApplicationsThere are a lot of Microchip Technology MCP73864-I/SL Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73862T-I/SL OverviewIt is included in the Tape & Reel (TR) package. Located in package 16-SOIC (0.154, 3.90mm Width), it can be found there.Amounting type Surface Mount is the one associated with the device.It is recommended to set the temperature to -40°C~85°C TA for reliable performance.This device makes use of an analog IC called POWER SUPPLY SUPPORT CIRCUIT in order to provide its functionality.For the device to be charged, there is Constant - Programmable current required.Parts related to the base part number MCP73862 can be found based on that number.The overall number of terminations that can be found in it is 16 as a whole.The device is equipped with a total of 16 pins.Timer are a programmable feature.As long as it is charged at maximum current, it will be rated as 1.38A.Product functionality is dependent on 16 pins.The number of available channels is 2.It is capable of withstanding a 12V supply voltage.In the case of 8.4V output voltage, there is a possibility of optimal efficiency.1.2A is the output current during the operation.This device belongs to the subcategory of Power Management Circuits.A supply voltage of 8.7V is suitable for it, because it can operate with a low supply voltage.In order to mount it, it has to align itself with Surface Mount.In order to ensure optimum supply voltage, the maximum voltage setting is set to 4mA. MCP73862T-I/SL Features2 channels Power Management Circuits subcategory 16-SOIC (0.154, 3.90mm Width) package MCP73862T-I/SL ApplicationsThere are a lot of Microchip Technology MCP73862T-I/SL Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73833-B6I/MF OverviewThere is a package for Tube in which it can be found.The package that is included with it comes in the shape of a 10-VFDFN Exposed Pad.Mounting type Surface Mount is chosen for the device.This is the right thing to do: set the temperature to -40°C~85°C TA.Charge the device by providing it with Constant - Programmable current.This part number MCP73833 can be used to find its related parts.A total of 10 terminations can be found in it.It is set to 4.2V for the battery pack.Serveral programmable features like Current.With maximum charging current, its rating is 1.1A.In order for the product to be functional, it requires that you connect the 10 pins according to the instructions.In this case, the device's maximum supply voltage is 6V.With a 4.5V output voltage, high efficiency is possible.A 1mA output current is used for operation.The device you are looking at belongs to the subcategory of Power Management Circuits.In most cases, the maximum supply voltage (Vsup) is set to 3mA.With respect to the power supply for the part, it is set to 3.8/5.5V. MCP73833-B6I/MF FeaturesBattery pack voltage of 4.2V Power Management Circuits subcategory 10-VFDFN Exposed Pad package MCP73833-B6I/MF ApplicationsThere are a lot of Microchip Technology MCP73833-B6I/MF Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ2057PDGKG4 OverviewIt is included in the Tube package. The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package includes it as a convenience.Amounting type Surface Mount is the one associated with the device.It is recommended that the temperature be set to -20°C~70°C TA in order to ensure reliable performance.It functions by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, a current of Constant - Programmable is required.You can find this device's related parts by searching the base part number BQ2057.The overall number of terminations that can be found in it is 8 as a whole.8 pins are on it in total.This device has a number of programmable features, including Current.It is necessary to connect the 8 pins during the installation process of this product.There are 1 channels available.The device should operate on a 5VV battery.There is a possibility of achieving optimal efficiency when the output voltage of the device is 4.1V.During operation, 2A represents the output current.There is one subcategory of this device, and it is Power Management Circuits.It is mounted in the way of Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 4mA.For best efficiency, set the supply voltage to 18V.It is important for a normal operation of the device that the supply voltage (Vsup) be maintained above 4.5V. BQ2057PDGKG4 Features1 channels Power Management Circuits subcategory 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package BQ2057PDGKG4 ApplicationsThere are a lot of Texas Instruments BQ2057PDGKG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP73834-B6I/UN OverviewThere is a package for Tube in which it can be found.Among the packages that come with this product, there is one that is 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).There is a mounting type Surface Mount specified for the device.A temperature setting of -40°C~85°C TA would be the best thing to do.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you will need to supply it with Constant - Programmable of current.If you use the base part number MCP73834, you can look for related parts.It contains 10 terminations.It is a 4.2V voltage for the battery pack.In addition to Current, there are several other programmable options.There is 1.1A maximum charging current listed on the device.During the installation process, this product requires the connection of 10 pins.The system currently provides 1 channels for the user to use.There is a preference for devices with 6V maximum supply voltages.Batteries with 5.2V can be used to power it.In the case of 4.5V output voltage, there is a possibility of optimal efficiency.The output current is set to 1mA in this case. MCP73834-B6I/UN FeaturesBattery pack voltage of 4.2V 1 channels 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package MCP73834-B6I/UN ApplicationsThere are a lot of Microchip Technology MCP73834-B6I/UN Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | L6924D DescriptionL6924D is a type of battery charger system with an integrated power switch for Li-Ion/Li-Polymer that is manufactured by STMicroelectronics for space-limited applications, like handheld equipment and digital cameras. The charge process termination and gas gauge capability can be controlled in a pretty flexible way. Moreover, it is able to protect against unsafe thermal conditions for the battery. More information can be found in the L6924D datasheet. L6924D Features
L6924D Applications
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TPS65010RGZRG4 OverviewThere is a package Tape & Reel (TR) available.There is currently a package available named 48-VFQFN Exposed Pad.In this case, the device is mounted in the way of Surface Mount.Keeping the temperature at -40°C~85°C TA will ensure reliable performance.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.To charge the device, there is a requirement for Constant - Programmable current.There are related parts to this device according to the base part number TPS65010.It contains a total of 48 terminations.There is a setting of 4.2V for the battery pack.In total, it has 48 pins.A maximum charging current of 500mA is recommended.In order for the product to function as intended, there are 48 pins that must be connected.The total number of channels that can be accessed by users is 2.A 3.6V battery should be sufficient.The board is capable of handling a voltage input of zero volts.It is possible to achieve high efficiency by using an output voltage of 3.3V.In this case, the output current of the device is set to 1A.There is a subcategory of Power Management Circuits for this device.It is capable of functioning at a voltage as low as possible, for example 4.5V voltage for this circuit is used.As far as the mounting is concerned, it is mounted in the way of Surface Mount.In order to ensure optimum supply voltage, the maximum voltage setting is set to 0.05mA.A power supply setting of 0 has been assigned to the part. TPS65010RGZRG4 FeaturesBattery pack voltage of 4.2V 2 channels Power Management Circuits subcategory 48-VFQFN Exposed Pad package TPS65010RGZRG4 ApplicationsThere are a lot of Texas Instruments TPS65010RGZRG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ24721RHBR OverviewIt is included in the Tape & Reel (TR) package. It is contained in a package named 32-VFQFN Exposed Pad.There is a type of mounting for this device: Surface Mount.Ensure reliable performance by setting the temperature to -40°C~85°C TA.There is an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT used in this device.You can find this device's related parts by searching the base part number BQ24721.As a whole, it contains 32 terminations.19.2V Max is the voltage for the battery pack.In total, it has 32 pins.This feature allows for programmability, such as Current.Channels are available in an amount of 1.It can be powered by a battery with 8V.Ideally, when the output voltage of the device is set to 19.2V, you will be able to achieve the highest degree of efficiency.Devices belonging to subcategory Power Management Circuits include this device.It is mounted in the manner of Surface Mount.The supply voltage should be set to 24V for best efficiency.As a rule of thumb, the supply voltage (Vsup) should be kept above 8V for normal operation. BQ24721RHBR FeaturesBattery pack voltage of 19.2V Max 1 channels Power Management Circuits subcategory 32-VFQFN Exposed Pad package BQ24721RHBR ApplicationsThere are a lot of Texas Instruments BQ24721RHBR Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ24032RHLRG4 OverviewThis item can be found in the Tape & Reel (TR) package.The package 20-VFQFN Exposed Pad includes a version of it.It appears that the device's mounting type is Surface Mount.If you wish to ensure reliable performance, set the temperature to -40°C~125°C TJ.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.It is necessary to supply the device with Constant - Programmable current in order to charge it.Based on the base part number BQ24032, its related parts can be identified.Among its terminations, there are 20.20 pins are on it in total.The unit is equipped with a number of programmable features, including Current, Timer.On the device, it is listed as having a charge current of 1.5A.A total of 1 channels are available.The possibility of optimal efficiency exists if 4.2V output voltage is used as the output voltage.Operation is achieved by providing a 4A output current.Subcategory 0 is home to this device.In order to mount it, it has to align itself with Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 2mA.There are several electrical components in the series bqTINY? III.The supply voltage should be set to 16V for best efficiency.It is important to keep the power supply voltage (Vsup) above 4.35V so that normal operation can take place. BQ24032RHLRG4 Features1 channels Power Management Circuits subcategory 20-VFQFN Exposed Pad package BQ24032RHLRG4 ApplicationsThere are a lot of Texas Instruments BQ24032RHLRG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ24115RHLRG4 OverviewIn the Tape & Reel (TR) package, you will find it.To make it easier for you, it is included with the 20-VFQFN Exposed Pad package.This device is mounted using type Surface Mount.Setting the temperature to -40°C~85°C TA is the right thing to do.In order for the device to function, an analog IC named BATTERY CHARGE CONTROLLER must be used.To charge the device, you need Constant - Programmable current.With the base part number BQ24115, it is possible to find related parts.It has a total of 20 terminations.The battery pack has 15.5V.20 pins are attached to it.This feature allows for programmability, such as Current, Timer.You need 20 pins for it to work.This device can be operated at an input voltage of 16V without being damaged.There is a possibility of high efficiency if the output voltage is set to 15.5V.With a 2A output current, the operation is conducted.At a low supply voltage, such as 4.35V, it can operate to the best of its ability.bqSWITCHER? series electrical components make up this component.As far as the input voltage is concerned, it has a minimum of 4.3V volts.As far as switching frequency is concerned, the part runs at 1.1MHz. BQ24115RHLRG4 FeaturesBattery pack voltage of 15.5V Switching frequency of 1.1MHz 20-VFQFN Exposed Pad package BQ24115RHLRG4 ApplicationsThere are a lot of Texas Instruments BQ24115RHLRG4 Battery Chargers ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
