My CartMultifunction(3130)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Infineon Technologies | IM512L6AXKMA1 OverviewThe package is designed with [0].This part is packaged with a case of [0].In most cases, it is recommended to mount the part at Through Hole.For the component connected to [0], it is suitable.In this case, the device can supply 14V~18.5V volts.Drivers controllers operates wDrivers controllershin a range of -40°C~125°Cdegrees Celsius.A total of 24terminations are available in this part.Drivers controllers is important to note that this amplifier should be operated at the 15Vsetting.Maintain the current output of the part at 10A volts.There is an analog integrated circuit AC MOTOR CONTROLLERpresent in the device.At [0], the output voltage is maintained. IM512L6AXKMA1 FeaturesApplications : General Purpose IM512L6AXKMA1 ApplicationsThere are a lot of Infineon Technologies IM512L6AXKMA1 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV777PWR OverviewThe package contains [0].This part is packed in a 16-TSSOP (0.173, 4.40mm Width) case.The part should be mounted by Surface Mount.I believe it would be suitable for the component connected to General Purpose.The device is capable of supplying a voltage of 5V~20V volts.Operation temperature ranges from -40°C~125°C TJ.In this case, the motor type is Brushed DC.The part supports 16terminations.In this case, the voltage can be applied to the load at the rate of 5V~20V.In order to get the best performance from this amplifier, it should be run at 3.3V.The recommended mounting method is Surface Mount.The DRV777part number is used to locate the part.Drivers controllers is designed wDrivers controllersh 16 pins.There are 7 outputs available.Drivers controllers is maintained at 400mV volts.The motor type can be identified as Stepper. DRV777PWR FeaturesApplications : General Purpose Load voltage across the chip 5V~20V base on DRV777 number designed with 7 outputs Motor Type classified as Stepper DRV777PWR ApplicationsThere are a lot of Texas Instruments DRV777PWR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | L6208Q OverviewThere is a Traypackage included in the design.The part is packaged in a 48-VFQFN Exposed Pad case.Drivers controllers is recommended to mount the part by Surface Mount.I believe it is suitable for the component connected to General Purpose.This device is capable of supplying voltages up to 8V~52V volts.Operation temperature ranges from -25°C~125°C TJ.There are 48 terminations available on this part.If the voltage is applied to the load at the rate of [0], the load will be affected.You should run this amplifier at 48V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Drivers controllers is recommended to keep the part output current at 2.5A.The L6208part number allows us to locate it.48pins are available on the device.This is part of the Motion Control Electronics series.Drivers controllers is possible to access 2outputs.In this case, the output voltage is maintained at 52V.Drivers controllers is maintained at a voltage of STSPIN L62.As a result, we can recognize that the motor type is Stepper.For compliance with the operation requirements, the maximum output current is [0]. L6208Q FeaturesApplications : General Purpose Load voltage across the chip 8V~52V base on L6208 number designed with 2 outputs Motor Type classified as Stepper L6208Q ApplicationsThere are a lot of STMicroelectronics L6208Q motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TMP814PWR OverviewThis package is designed to work with [0].This part is packaged with a case of [0].To mount the part by [0], it is recommended that you do so.I believe it would be suitable for the component connected to Fan Controller.There is a possibility of providing 6V~16Vvolts through the device.A range of -30°C~95°C TAis available for operating temperature.A Brushed DCmotor can be classified as a type of motor.The part has 20terminations available.I would like to remind you that this amplifier should be operated at 12V.A Surface Mountmounting method is recommended for this product.A AC MOTOR CONTROLLERanalog integrated circuit is employed in the device.Using the TMP814part number, it is located.This device is designed with a pin count of 20.This is part of the Motion Control Electronics series.At [0], the output voltage is maintained.Drivers controllers offers maximum design flexibilDrivers controllersy wDrivers controllersh a 10mAoutput current.A total of 1drivers are installed on it. TMP814PWR FeaturesApplications : Fan Controller base on TMP814 number with 1 Drivers TMP814PWR ApplicationsThere are a lot of Texas Instruments TMP814PWR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MTS2916A-LGC1 OverviewDrivers controllers is designed with Tape & Reel (TR) package.This part is packaged with a case of [0].A mounting position of Surface Mountis recommended for the part.For the component connected to [0], it is suitable.There is a possibility of providing 4.5V~5.5Vvolts through the device.There is a temperature range of -40°C~150°C TJin which this device operates.Drivers controllers is possible to categorize the motor type as Brushed DC.This part offers 24terminations.The voltage can applied to the load at the rate of 10V~40V.Drivers controllers is recommended that this amplifier be run at 5V.Its recommended mounting way is Surface Mount.Maintain the current output of the part at 750mA volts.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.As a result of the MTS2916Apart number, it can be found.Drivers controllers is designed wDrivers controllersh 24 pins.The Motion Control Electronicsseries includes this item.A supply voltage of 30V is required for the operation of this driver. MTS2916A-LGC1 FeaturesApplications : General Purpose Load voltage across the chip 10V~40V base on MTS2916A number MTS2916A-LGC1 ApplicationsThere are a lot of Microchip Technology MTS2916A-LGC1 motor drivers applications.
|
4305
In-stock
|
Get Quote | |||
| Microchip Technology | MTD6501C-LC1 OverviewDrivers controllers is designed with Tape & Reel (TR) package.Parts are packaged in 8-SOIC (0.154, 3.90mm Width) Exposed Padcases.The part should be mounted by Surface Mount.I believe it would be suitable for the component connected to Fan Motor Driver.A device with a voltage range of 2V~14V volts is available.This device operates at a temperature of -30°C~150°C TJ.The motor type can be classified as Brushless DC (BLDC).There are 8 terminations available in the part.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is important to remember that this amplifier should be run at 5V.The output current should remain at 800mA.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is used in the device.MTD6501is the part number that finds it.The item belongs to the Motion Control Electronics series.1outputs are available in total. MTD6501C-LC1 FeaturesApplications : Fan Motor Driver Load voltage across the chip 2V~14V base on MTD6501 number designed with 1 outputs MTD6501C-LC1 ApplicationsThere are a lot of Microchip Technology MTD6501C-LC1 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV10963JUDSNR OverviewThis package is designed to work with [0].There is 10-UFDFN Exposed Pad case included with the part.Surface Mountshould be used for mounting the part.I believe it would be suitable for the component connected to Fan Motor Driver.The device is capable of supplying a voltage of 2.1V~5.5V volts.In terms of operating temperature, it falls within the range -40°C~125°C TJ.Motors can be classified as Brushless DC (BLDC).A total of 10terminations are available in the part.You can apply voltage at 2.1V~5.5Vto the load.I would like to remind you that this amplifier should be operated at 5V.Surface Mountis its recommended mounting method.The output current should be kept at 500mA for the part.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.Drivers controllers is based on the DRV10963 part number.The device has 10 pins.A supply voltage of 5.5Vis required to operate this driver. DRV10963JUDSNR FeaturesApplications : Fan Motor Driver Load voltage across the chip 2.1V~5.5V base on DRV10963 number DRV10963JUDSNR ApplicationsThere are a lot of Texas Instruments DRV10963JUDSNR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV10963DSNR OverviewThe package is designed with [0].10-UFDFN Exposed Padcases are included with the part.In most cases, it is recommended to mount the part at Surface Mount.The component connected in Fan Motor Driveris compatible with it.There is a capability for the device to provide 2.1V~5.5V volts.A range of -40°C~125°C TJis available for operating temperature.In this case, the motor type is Brushless DC (BLDC).A total of 10terminations are available in the part.A voltage of 2.1V~5.5Vcan be applied to the load.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.The recommended way to mount it is Surface Mount.Maintain a current of 500mA for the part output.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.The part number DRV10963indicates that it is found.10 pins are provided for its design.This is part of the Motion Control Electronics series.A total of 3outputs are available.Controller ic is powered by 5.5mAsupply current. DRV10963DSNR FeaturesApplications : Fan Motor Driver Load voltage across the chip 2.1V~5.5V base on DRV10963 number designed with 3 outputs DRV10963DSNR ApplicationsThere are a lot of Texas Instruments DRV10963DSNR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Infineon Technologies | BTM7752GXUMA1 OverviewThe package contains [0].Drivers controllers is packaged wDrivers controllersh a 36-BSSOP (0.295, 7.50mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.For the component connected to [0], it is suitable.A device with a voltage range of 5.5V~28V volts is available.With regard to operating temperature, it ranges -40°C~150°C TJ. This motor type can be categorized as Brushed DC.The part supports 36terminations.You can apply voltage at 5.5V~28Vto the load.This amplifier should be operated at 13.5V.Maintain a current of 12Afor the part output.According to the BTM7752part number, the part is found.Drivers controllers is maintained at a voltage of TrilithIC?. BTM7752GXUMA1 FeaturesApplications : General Purpose Load voltage across the chip 5.5V~28V base on BTM7752 number BTM7752GXUMA1 ApplicationsThere are a lot of Infineon Technologies BTM7752GXUMA1 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TPIC2060ADFDRG4 OverviewDrivers controllers includes a Tape & Reel (TR)package.The part is packged with 56-TFSOP (0.240, 6.10mm Width) Exposed Pad case.In general, it is recommended that the part be mounted by Surface Mount.Fits the component connected to Media Player.The device is capable of supplying a voltage of 3.3V 5V 12V volts.Operation temperature ranges from -20°C~70°C TA.There is a motor type Brushless DC (BLDC), Brushed DCassociated with this motor type.A total of 56terminations are available in this part.The voltage can applied to the load at the rate of 5V 12V.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.There is a recommended mounting method of Surface Mount.Maintain a current of 400mA 1.7A for the part output.The device utilizes the IC DISK DRIVE MOTOR CONTROLLERwhich is an analog IC.The part number TPIC2060indicates that it is found.56pins are present on the device.Controller ic has also been assigned the characteristic [0]. TPIC2060ADFDRG4 FeaturesApplications : Media Player Load voltage across the chip 5V 12V base on TPIC2060 number Additional Feature: ALSO REQUIRED 10.8V TO 13.2V SUPPLY TPIC2060ADFDRG4 ApplicationsThere are a lot of Texas Instruments TPIC2060ADFDRG4 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV8885PWPR OverviewThe design contains a Tape & Reel (TR)package.24-TSSOP (0.173, 4.40mm Width)cases are included with the part.A mounting position of Surface Mountis recommended for the part.As a result, it is appropriate for the component connected to Printer.0V~5.3V volts can be supplied by the device.This device operates at a temperature range of -40°C~150°C TJ.This part provides 24terminations.The voltage can applied to the load at the rate of 8V~37V.This amplifier should be operated at 24V.Maintain a current of 1A for the part output.DRV8885is the part number that finds it.This device is designed with a pin count of 24.The available outputs are [0].The motor type can be recognized as Stepper. DRV8885PWPR FeaturesApplications : Printer Load voltage across the chip 8V~37V base on DRV8885 number designed with 1 outputs Motor Type classified as Stepper DRV8885PWPR ApplicationsThere are a lot of Texas Instruments DRV8885PWPR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV8805PWPR OverviewThere is a Tape & Reel (TR)package included in the design.16-PowerTSSOP (0.173, 4.40mm Width)cases are included with the part.A mounting position of Surface Mountis recommended for the part.In this case, it is appropriate for the component connected to General Purpose.In this case, the device can supply 8.2V~60V volts.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.Motors can be classified as Brushed DC.This part provides 16terminations.There is the option of applying the voltage to the load at the rate of 8.2V~60V.Drivers controllers is important to remember that this amplifier should be run at 24V.Surface Mountis its recommended mounting method.Drivers controllers is recommended to keep the part output current at 1A.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.The DRV8805part number allows us to locate it.16pins are used in its design.Drivers controllers is part of the series [0].The number of outputs available is [0]. DRV8805PWPR FeaturesApplications : General Purpose Load voltage across the chip 8.2V~60V base on DRV8805 number designed with 4 outputs DRV8805PWPR ApplicationsThere are a lot of Texas Instruments DRV8805PWPR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | <div>VNH7070BASTR Description<br/> <br/><br/>VNH7070BASTR is a complete bridge motor driver designed to serve a range of automotive use. The device is comprised of an Omni-directional high-side driver along with two lower-side switches. Both switches can effectively join onto the one die a real Power MOSFET with an intelligent signal/protection circuit.<br/><br/><br/>VNH7070BASTR Features<br/><br/><br/>AEC-Q100 qualified<br/>Output current: 15 A<br/>3V CMOS-compatible inputs<br/>Under-voltage shutdown<br/>Over-voltage clamp<br/>Thermal shutdown<br/>Cross-conduction protection<br/><br/><br/><br/>VNH7070BASTR Applications<br/><br/><br/>Control the speed of the motor?<br/>Monitor the motor<br/>Delivering a current?<br/>PWM<br/>Switches</div> |
999
In-stock
|
Get Quote | |||
| Texas Instruments | <h3>DRV8812PWPR Overview</h3><div><br/>The package contains [0].28-PowerTSSOP (0.173, 4.40mm Width)cases are included with the part.The part should be mounted by Surface Mount.I believe it is suitable for the component connected to General Purpose.There is a possibility of providing 8.2V~45Vvolts through the device.Drivers controllers operates wDrivers controllershin a range of -40°C~150°C TJdegrees Celsius.Motors can be classified as Brushed DC.A total of 28terminations are available in the part.In this case, the voltage can be applied to the load at the rate of 8.2V~45V.This amplifier should be operated at 24V.There is a recommended mounting method of Surface Mount.Drivers controllers is recommended to keep the part output current at 1.6A.The DRV8812part number is used to locate the part.The device has 28 pins.Drivers controllers belongs to the series [0].Drivers controllers is possible to access 2outputs.Controller ic is possible to reach a frequency of 50kHz.<br/><br/></div><h3>DRV8812PWPR Features</h3><div><br/>Applications : General Purpose<br/>Load voltage across the chip 8.2V~45V<br/>base on DRV8812 number<br/>designed with 2 outputs<br/><br/></div><h3>DRV8812PWPR Applications</h3><div><br/>There are a lot of Texas Instruments DRV8812PWPR motor drivers applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>Hospitality buildings<!--<li--></li><li>High brightness LED lighting<!--<li--></li><li>Arena lighting <!--<li--></li><li>Horticultural lighting<!--<li--></li><li>A cross between entertainment<!--<li--></li><li>Smart lighting applications<!--<li--></li><li>High brightness LED lighting<!--<li--></li><li>Industrial lighting<!--<li--></li><li>Lighting for health and wellbeing<!--<li--></li><li>Alternative to HID lights<!--<li--></li></ul> |
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV8881PPWPR OverviewThere is a Tape & Reel (TR)package included in the design.Drivers controllers comes in a 28-PowerTSSOP (0.173, 4.40mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.I believe it would be suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 6.5V~45V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.This motor type can be categorized as Brushed DC.This part provides 28terminations.You can apply voltage at 6.5V~45Vto the load.In order to get the best performance from this amplifier, it should be run at 24V.Surface Mountis the recommended mounting method.Set the part's output current to 1.4A.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.The DRV8881part number allows us to locate it.28pins are present on the device.In the Motion Control Electronicsseries, it is included. DRV8881PPWPR FeaturesApplications : General Purpose Load voltage across the chip 6.5V~45V base on DRV8881 number DRV8881PPWPR ApplicationsThere are a lot of Texas Instruments DRV8881PPWPR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV10983ZPWPR OverviewThere is a Tape & Reel (TR)package included in the design.Parts are packaged in 24-TSSOP (0.173, 4.40mm Width) Exposed Padcases.Drivers controllers is recommended that the part be mounted by Surface Mount.This component is suitable for the component connected to Appliance.8V~28V volts can be supplied by the device.There is a temperature range of -40°C~125°C TJin which this device operates.A Brushless DC (BLDC)motor can be classified as a type of motor.There are 24 terminations available on this part.Voltage can be applied at a rate of 8V~28V volts to the load.This amplifier should be operated at 24V.Its recommended mounting way is Surface Mount.Ensure that the part output current remains at 2A.There is an analog integrated circuit BRUSHLESS DC MOTOR CONTROLLERpresent in the device.According to the DRV10983part number, the part is found.This device is designed with a pin count of 24.The available outputs are [0].The driver operates from a supply voltage of 24V volts.Controller ic operates wController ich a supply current of 3.5mA. DRV10983ZPWPR FeaturesApplications : Appliance Load voltage across the chip 8V~28V base on DRV10983 number designed with 3 outputs DRV10983ZPWPR ApplicationsThere are a lot of Texas Instruments DRV10983ZPWPR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV8323HRTAR OverviewDrivers controllers includes a Tape & Reel (TR)package.There is 40-WFQFN Exposed Pad case included with the part.Drivers controllers is recommended that the part be mounted by Surface Mount.In this case, it is appropriate for the component connected to Brushless DC (BLDC).There is a capability for the device to provide 6V~60V volts.A range of -40°C~125°C TAis available for operating temperature.The motor type can be classified as Brushless DC (BLDC).There are 40 terminations available on this part.Please take in mind that this amplifier should be run at 24V.Ensure that the part output current remains at 5mA.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.Using the DRV8323part number, it is located.This device is designed with a pin count of 40. DRV8323HRTAR FeaturesApplications : Brushless DC (BLDC) base on DRV8323 number DRV8323HRTAR ApplicationsThere are a lot of Texas Instruments DRV8323HRTAR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | ATA6830-PKH OverviewThe design includes a package of type [0].The part is packged with 28-VQFN Exposed Pad case.A mounting position of Surface Mountis recommended for the part.For the component connected to [0], it is suitable.In this case, the device can supply 7V~20V volts.This device operates at a temperature range of -40°C~150°C TJ.Drivers controllers is possible to apply voltage to the load at the rate of 7V~20V.Ideally, it should be mounted in the Surface Mountposition.Maintain the current output of the part at 1.1A volts.Using the ATA6830part number, it is located.28pins are available on the device.1outputs are available.The maximal operating temperature reaches 105°C.The operating temperature should be higher than -40°C.An application with a maximum supply voltage of 20V can be made possible.A minimum supply voltage of 7Vcan be used for the operation of this device. ATA6830-PKH FeaturesApplications : Automotive Load voltage across the chip 7V~20V base on ATA6830 number designed with 1 outputs ATA6830-PKH ApplicationsThere are a lot of Microchip Technology ATA6830-PKH motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV8860PWPR OverviewThere is a Tape & Reel (TR)package included in the design.Drivers controllers is packaged wDrivers controllersh a 16-PowerTSSOP (0.173, 4.40mm Width) case.Mounting the part by Surface Mountis recommended.I believe it would be suitable for the component connected to General Purpose.8V~38V volts can be supplied by the device.With regard to operating temperature, it ranges -40°C~150°C TJ. There is a motor type Brushed DCavailable.In this part, there are 16 terminations available.Voltage can be applied at a rate of 8V~38V volts to the load.Ideally, it should be mounted in the Surface Mountposition.Keep the part output current at 330mA.Using the DRV8860part number, it is located.16 pins are provided for its design.A supply voltage of 38Vis required to operate this driver. DRV8860PWPR FeaturesApplications : General Purpose Load voltage across the chip 8V~38V base on DRV8860 number DRV8860PWPR ApplicationsThere are a lot of Texas Instruments DRV8860PWPR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV8874PWPR Description The DRV8874PWPR is an integrated motor driver with N-Channel H-bridge, charge pump, current sensing and proportional output, current regulation, and protection circuitry. DRV8874PWPR Features Motor Power Supply 4.5V to 24V (Maximum Input 37V DC) Load Current 0.5A/1A (3.7A Maximum) Peak Load Current 6 Amps PWM Frequency 10Khz to 20Khz PWM Duty Cycle 0-100% Proportional current output (IPROPI) 1.5V output when load current 0.5A No Heat-sink Required Trimmer Potentiometer to set Overload Protection Over Load Protection with I Trip Logic Supply 3.3V Required PWM and DIR signal Brake Function Available Under-voltage lockout (UVLO) Thermal shutdown (TSD) Automatic fault recovery All Input Signals 3.3V Voltage Level (Supports 1.8-V, 3.3-V, and 5-V logic inputs) Fault Output (Normally High 3.3V, Low when Fault Condition Occurs) Enable Input (High Input Enables, Low input Disables the output) PCB Dimensions 40.64 x 26.19 mm DRV8874PWPR Applications Brushed DC motors Major and small home appliances Vacuum, humanoid, and toy robotics Printers and scanners Smart meters ATMs, currency counters, and EPOS Servo motors and actuators |
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV8323HRTAT DescriptionThe DRV8323HRTAT is an integrated gate driver for three-phase applications. The devices provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The DRV8323HRTAT generates the proper gate drive voltages using an integrated charge pump for the high-side MOSFETs and a linear regulator for the low-side MOSFETs. The smart gate-drive architecture supports up to 1-A source and 2-A sink peak gate drive current capability. The DRV8323HRTAT can operate from a single power supply and supports a wide input supply range of 6 to 60-V for the gate driver and 4 to 60-V for the optional buck regulator. DRV8323HRTAT FeaturesTriple Half-Bridge Gate Driver Drives High-Side and Low-Side N-Channel MOSFETs Supports 100% PWM Duty Cycle Smart Gate Drive Architecture Adjustable Slew Rate Control 10-mA to 1-A Peak Source Current 20-mA to 2-A Peak Sink Current Integrated Gate Driver Power Supplies High-Side Charge Pump Low-Side Linear Regulator 6 to 60-V Operating Voltage Range Optional Integrated Buck Regulator LMR16006X SIMPLE SWITCHER? 4 to 60-V Operating Voltage Range 0.8 to 60-V, 600-mA Output Capability |
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV8804DW OverviewDrivers controllers includes a Tubepackage.Drivers controllers is packaged wDrivers controllersh a 20-SOIC (0.295, 7.50mm Width) case.The part should be mounted by Surface Mount.I believe it is suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 8.2V~60V volts.There is a temperature range of -40°C~150°C TJin which this device operates.This motor type can be categorized as Brushed DC.This part provides 20terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.I would like to remind you that this amplifier should be operated at 24V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Drivers controllers is recommended to keep the part output current at 800mA.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.Drivers controllers is based on the DRV8804 part number.There are 20 pins on it.4outputs are available in total. DRV8804DW FeaturesApplications : General Purpose Load voltage across the chip 8.2V~60V base on DRV8804 number designed with 4 outputs DRV8804DW ApplicationsThere are a lot of Texas Instruments DRV8804DW motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV8828PWP OverviewDrivers controllers includes a Tubepackage.28-PowerTSSOP (0.173, 4.40mm Width)cases are included with the part.To mount the part by [0], it is recommended that you do so.This component is suitable for the component connected to General Purpose.This device is capable of supplying voltages up to 8.2V~45V volts.This device operates at a temperature of -40°C~150°C TJ.There is a motor type Brushed DCavailable.The part has 28terminations available.Voltage can be applied at a rate of 8.2V~45V volts to the load.Drivers controllers is recommended that this amplifier be run at 24V.There is a recommended mounting method of Surface Mount.Drivers controllers is recommended to keep the part output current at 3A.The DRV8828part number allows us to locate it.A device with 28pins is available.The Motion Control Electronicsseries includes this item.A total of 1outputs are available.Drivers controllers is possible to recognize Stepperas the type of motor. DRV8828PWP FeaturesApplications : General Purpose Load voltage across the chip 8.2V~45V base on DRV8828 number designed with 1 outputs Motor Type classified as Stepper DRV8828PWP ApplicationsThere are a lot of Texas Instruments DRV8828PWP motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV2665RGPR OverviewDrivers controllers includes a Tape & Reel (TR)package.The part is packged with 20-VFQFN Exposed Pad case.Surface Mountshould be used for mounting the part.The component connected in Haptic Feedbackmatches it perfectly.The device can supply 3V~5.5V volts.This device operates at a temperature of -40°C~150°C TJ.Drivers controllers is possible to categorize the motor type as Piezo.The part supports 20terminations.Drivers controllers is important to note that this amplifier should be operated at the 3.6Vsetting.Surface Mountis its recommended mounting method.In this device, the analog IC ANALOG CIRCUITis employed.The part number DRV2665indicates that it is found.A device with 20pins is available.There are a total of 1outputs available.The driver operates on a supply voltage of 5.5V volts.Drivers controllers is maintained at 200V volts.On this device, there are 1channels. DRV2665RGPR FeaturesApplications : Haptic Feedback base on DRV2665 number designed with 1 outputs DRV2665RGPR ApplicationsThere are a lot of Texas Instruments DRV2665RGPR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | DescriptionThe VNH7100BASTR is a fully integrated H-bridge motor driver for automotive applications. This is a full-bridge motor driver that can be used in a variety of automotive applications. A dual monolithic high-side driver and two low-side switches are included in the device. Both switches are built using STMicroelectronics' unique VIPower? M0 technology, which enables for the efficient integration of a genuine Power MOSFET with intelligent signal/protection circuitry on the same chip. The three dies are mounted on electrically isolated lead frames in a SO-16N package. Features● AEC-Q100 qualified ● Output current: 15 A ● 3 V CMOS-compatible inputs ● Undervoltage shutdown ● Overvoltage clamp ● Thermal shutdown ● Cross-conduction protection ● Current and power limitation ● Very low standby power consumption ● Protection against loss of ground and loss of VCC ● PWM operation up to 20 kHz ● MultiSense diagnostic functions – Analog motor current feedback – Output short to ground detection – Thermal shutdown indication – OFF-state open-load detection – Output short to VCC detection ● Output protected against short to ground and short to VCC ● Standby Mode ● Half Bridge Operation ● Package: ECOPACK? Applications● Automotive Applications ● Acts As an Interface Between the Motors and the Control Circuits ● AC Motors ● Brushless DC Motors ● Industrial Motors ● Servo Motors |
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | MC33931EKR2 OverviewThe package is designed with [0].The part is packged with 32-SSOP (0.295, 7.50mm Width) Exposed Pad case.The part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in Automotive.In this case, the device can supply 5V~28V volts.This device operates at a temperature range of -40°C~125°C TA.Motors can be classified as Brushed DC.A voltage of 5V~28Vcan be applied to the load.Maintain a 5Aoutput current for the part.The part number MC33931indicates that it is found. MC33931EKR2 FeaturesApplications : Automotive Load voltage across the chip 5V~28V base on MC33931 number MC33931EKR2 ApplicationsThere are a lot of NXP USA Inc. MC33931EKR2 motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Infineon Technologies |
7040
In-stock
|
Get Quote | ||||
| STMicroelectronics | L6229QTR OverviewDrivers controllers is designed with Tape & Reel (TR) package.The part is packaged in a 32-VFQFN Exposed Pad case.To mount the part by [0], it is recommended that you do so.The component connected in General Purposeis compatible with it.Drivers controllers is capable of supplying 8V~52V volts.This device operates at a temperature range of -25°C~125°C TJ.Drivers controllers is possible to categorize the motor type as Brushless DC (BLDC).This part provides 32terminations.Drivers controllers is possible to apply voltage at a rate of 8V~52Vto the load.Drivers controllers is recommended that this amplifier be run at 48V.A Surface Mountmounting method is recommended for this product.Maintain a current of 1.4Afor the part output.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.Based on the L6229part number, it is found.The Motion Control Electronicsseries includes this item.There are 1 outputs available.In this case, 52Vis maintained as the output voltage.STSPIN L62 is the main series of the part. L6229QTR FeaturesApplications : General Purpose Load voltage across the chip 8V~52V base on L6229 number designed with 1 outputs L6229QTR ApplicationsThere are a lot of STMicroelectronics L6229QTR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV83055PHPR OverviewThere is a Tape & Reel (TR)package included in the design.48-PowerTQFPcases are included with the part.Drivers controllers is recommended to mount the part by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in Three-Phase BLDC, PMSM Motors.There is a possibility of providing 4.4V~45Vvolts through the device.With regard to operating temperature, it ranges -40°C~125°C TA. In this part, there are 48 terminations available.There is Surface Mount recommended mounting method for this device.Using the DRV8305part number, it is located.There are 48 pins on it.There is 45V supply voltage required for this driver.For the purposes of meeting its operation requirements, the maximum output current reaches [0].There are 6 drivers installed on this device. DRV83055PHPR FeaturesApplications : Three-Phase BLDC, PMSM Motors base on DRV8305 number with 6 Drivers DRV83055PHPR ApplicationsThere are a lot of Texas Instruments DRV83055PHPR motor drivers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DRV8320RSRHAR OverviewDrivers controllers includes a Tape & Reel (TR)package.Drivers controllers comes in a 40-VFQFN Exposed Pad case.Surface Mountshould be used for mounting the part.As a result, it is appropriate for the component connected to Brushless DC (BLDC).In this case, the device can supply 6V~60V volts.There is a temperature range of -40°C~125°C TAin which this device operates.There is a motor type Brushless DC (BLDC)available.The part has 40terminations available.Drivers controllers is important to remember that this amplifier should be run at 24V.The output current should be kept at 5mA for the part.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.Drivers controllers is based on the DRV8320 part number.The device has 40 pins. DRV8320RSRHAR FeaturesApplications : Brushless DC (BLDC) base on DRV8320 number DRV8320RSRHAR ApplicationsThere are a lot of Texas Instruments DRV8320RSRHAR motor drivers applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
