Multifunction(3130)

Part	Manufacturer	Description		Stock	Action
536-MTD6508T-ADJE/JQ	Microchip Technology	MTD6508T-ADJE/JQ Overview The package contains [0].A 16-UQFN Exposed Padcase is included with the part.Mounting the part by Surface Mountis recommended.I believe it would be suitable for the component connected to General Purpose.There is a capability for the device to provide 2V~5.5V volts.In terms of operating temperature, it falls within the range -40°C~125°C TA.In this case, the motor type is Brushless DC (BLDC).There are 16 terminations available on this part.In this case, the voltage can be applied to the load at the rate of 2V~5.5V.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.In terms of mounting, it is recommended that it be mounted in Surface Mount.Maintain a 1Aoutput current for the part.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is used in the device.Using the MTD6508part number, it is located. MTD6508T-ADJE/JQ Features Applications : General Purpose Load voltage across the chip 2V~5.5V base on MTD6508 number MTD6508T-ADJE/JQ Applications There are a lot of Microchip Technology MTD6508T-ADJE/JQ motor drivers applications. Digital still cameras Turn signals Lighting for health and wellbeing Fog lamps Display LED backlighting Alternative to HID lights Telltale lights Mobile phone display backlight and key light driving General lighting Outdoor area lights	PDF	999 In-stock	Get Quote
536-TC648BEOA713	Microchip Technology	TC648BEOA713 Overview The package contains [0].This part is packaged with a case of [0].The part should be mounted by Surface Mount.I believe it would be suitable for the component connected to Fan Controller.The device is capable of supplying a voltage of 3V~5.5V volts.Regarding the operating temperature, it is in the range of -40°C~85°C TA°C.The motor type can be classified as Brushless DC (BLDC).A total of 8terminations are available in the part.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.There is a recommended mounting method of Surface Mount.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.TC648is the part number that finds it.8pins are present on the device.This is part of the Motion Control Electronics series.There are a total of 1outputs available.Keeps the output voltage at FanSense?at all times.Having a 5mAoutput current, it provides maximum design flexibility. TC648BEOA713 Features Applications : Fan Controller base on TC648 number designed with 1 outputs TC648BEOA713 Applications There are a lot of Microchip Technology TC648BEOA713 motor drivers applications. LED ballasts General lighting Industrial high-bay lights Large outdoor LED display Indicator Emergency lighting Mobile phone display backlight and key light driving Automotive exterior and interior lighting Scanning equipment Human-centric lighting	PDF	999 In-stock	Get Quote
536-TC648EUA713	Microchip Technology	TC648EUA713 Overview This package was designed with Tape & Reel (TR)in mind.Parts are packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)cases.To mount the part by [0], it is recommended that you do so.Fits the component connected to Fan Controller.This device is capable of supplying voltages up to 3V~5.5V volts.Operation temperature ranges from -40°C~85°C TA.The motor type can be classified as Brushless DC (BLDC).This part provides 8terminations.You should run this amplifier at 5V.The recommended mounting method is Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.TC648is the part number that finds it.8pins are used in its design.Drivers controllers belongs to the series [0].Drivers controllers is possible to access 1outputs.As it has an output current of [0], it provides maximum flexibility in design. TC648EUA713 Features Applications : Fan Controller base on TC648 number designed with 1 outputs TC648EUA713 Applications There are a lot of Microchip Technology TC648EUA713 motor drivers applications. Footwell lighting Display LED backlighting Landscape lighting Step-up or step-down driver topologies Matrix LED dimmers Indicator Scanning equipment Running preventive- maintenance diagnostics PDAs Large format LED backlighting	PDF	999 In-stock	Get Quote
536-TC649BEUATR	Microchip Technology	TC649BEUATR Overview The package is designed with [0].This part is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case.Mounting the part by Surface Mountis recommended.This component is suitable for the component connected to Fan Controller.The device can supply 3V~5.5V volts.Operation temperature ranges from -40°C~85°C TA.In this case, the motor type is Brushless DC (BLDC).The part supports 8terminations.This amplifier should be operated at 5V.There is Surface Mount recommended mounting method for this device.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is used in the device.The TC649part number is used to locate the part.8pins are available on the device.This is part of the Motion Control Electronics series.A total of 1outputs are available.Drivers controllers is maintained at a voltage of FanSense?.Drivers controllers offers maximum design flexibilDrivers controllersy wDrivers controllersh a 5mAoutput current. TC649BEUATR Features Applications : Fan Controller base on TC649 number designed with 1 outputs TC649BEUATR Applications There are a lot of Microchip Technology TC649BEUATR motor drivers applications. LED ballasts Display LED backlighting Infotainment backlighting Fog lamps Side marker lights Brake lights RGB and monochromatic LED drivers for signage and traffic signals LCD displays Accurate LED current matching Automotive exterior and interior lighting	PDF	999 In-stock	Get Quote
536-TC649EUATR	Microchip Technology	TC649EUATR Overview Drivers controllers is designed with Tape & Reel (TR) package.Parts are packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)cases.Surface Mountshould be used for mounting the part.For the component connected to [0], it is suitable.Drivers controllers is capable of supplying 3V~5.5V volts.In terms of operating temperature, it falls within the range -40°C~85°C TA.This motor type can be categorized as Brushless DC (BLDC).This part has 8termination options.You should run this amplifier at 5V.There is a recommended mounting method of Surface Mount.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.Using the TC649part number, it is located.Drivers controllers is designed wDrivers controllersh 8 pins.Drivers controllers is a part of the Motion Control Electronics series.Currently, there are 1 outputs available.At [0], the output voltage is maintained.With a 5mA output current, it offers maximal design flexibility. TC649EUATR Features Applications : Fan Controller base on TC649 number designed with 1 outputs TC649EUATR Applications There are a lot of Microchip Technology TC649EUATR motor drivers applications. Infotainment backlighting Multiple output capability Emergency lighting Outdoor area lights LCD displays Digital still cameras parking lights General lighting Charge pump circuits Large outdoor LED display	PDF	999 In-stock	Get Quote
536-TC647EUATR	Microchip Technology	TC647EUATR Overview The package contains [0].This part is packaged with a case of [0].To mount the part by [0], it is recommended that you do so.This component is suitable for the component connected to Fan Controller.3V~5.5V volts can be supplied by the device.This device operates at a temperature range of -40°C~85°C TA.There is a motor type Brushless DC (BLDC)associated with this motor type.There are 8 terminations available in the part.Drivers controllers is recommended that this amplifier be run at 5V.The recommended way to mount it is Surface Mount.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.Drivers controllers is based on the TC647 part number.In this device, there are 8 pins.Drivers controllers is a part of the Motion Control Electronics series.Drivers controllers is possible to access 1outputs.FanSense? is the main series of the part.With a 5mA output current, it offers the greatest degree of design flexibility. TC647EUATR Features Applications : Fan Controller base on TC647 number designed with 1 outputs TC647EUATR Applications There are a lot of Microchip Technology TC647EUATR motor drivers applications. Dome Accurate LED current matching PWM generators Mobile phone display backlight and key light driving Automotive exterior and interior lighting Lighting for the ambience of tunability Charge pump circuits Infotainment backlighting Side marker lights Matrix LED dimmers	PDF	999 In-stock	Get Quote
536-TC647BEUATR	Microchip Technology	TC647BEUATR Overview The package contains [0].This part is packaged with a case of [0].Drivers controllers is recommended that the part be mounted by Surface Mount.This component is suitable for the component connected to Fan Controller.This device is capable of supplying voltages up to 3V~5.5V volts.This device operates at a temperature of -40°C~85°C TA.There is a motor type Brushless DC (BLDC)available.There are 8 terminations available on this part.The amplifier should be set to 5V.Surface Mountis its recommended mounting method.The device employs the BRUSHLESS DC MOTOR CONTROLLER analog IC.Based on the TC647part number, it is found.8pins are present on the device.Drivers controllers belongs to the Motion Control Electronics series.There are 1 outputs available.FanSense?is maintained as the output voltage.Drivers controllers offers maximum design flexibilDrivers controllersy due to Drivers controllerss 5mAoutput current. TC647BEUATR Features Applications : Fan Controller base on TC647 number designed with 1 outputs TC647BEUATR Applications There are a lot of Microchip Technology TC647BEUATR motor drivers applications. Infotainment backlighting Dash Digital still cameras LED ballasts Large format LED backlighting Architectural lighting Horticultural applications Hidden coves in high-end residential settings High brightness LED lighting Footwell lighting	PDF	999 In-stock	Get Quote
536-TC646BEUA	Microchip Technology	TC646BEUA Overview The design includes a package of type [0].A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)case is included with the part.A mounting position of Surface Mountis recommended for the part.I believe it would be suitable for the component connected to Fan Controller.Drivers controllers is capable of supplying 3V~5.5V volts.This device operates at a temperature of -40°C~85°C TA.A Brushless DC (BLDC)motor can be classified as a type of motor.This part provides 8terminations.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.Ideally, it should be mounted in the Surface Mountposition.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.This can be determined by looking at the TC646 part number.This device is designed with a pin count of 8.This is part of the Motion Control Electronics series.A constant voltage is maintained at 4.4V.Continually maintains the output voltage at FanSense?.Featuring a 5mAoutput current, this device provides maximum design flexibility.There are 1 channels on this device.A frequency of 30Hzcan be achieved. TC646BEUA Features Applications : Fan Controller base on TC646 number TC646BEUA Applications There are a lot of Microchip Technology TC646BEUA motor drivers applications. Lighting for health and wellbeing Side marker lights A cross between entertainment Mobile phone display backlight and key light driving Landscape lighting Running preventive- maintenance diagnostics Home lighting systems PWM generators CHMSL (center high-mount stop lamps) PDAs	PDF	999 In-stock	Get Quote
536-TC647VUA	Microchip Technology	TC647VUA Overview There is a Tubepackage included in the design.This part is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case.The part should be mounted by Surface Mount.This component is suitable for the component connected to Fan Controller.There is a possibility of providing 3V~5.5Vvolts through the device.Operation temperature ranges from 0°C~85°C TA.The motor type can be classified as Brushless DC (BLDC).In this part, there are 8 terminations available.This amplifier should be operated at 5V.The recommended mounting method is Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is used in the device.According to the TC647part number, the part is found.This device is designed with a pin count of 8.Drivers controllers is part of the series [0].The number of outputs available is [0].FanSense?is maintained as the output voltage.As it has a 5mAoutput current, it provides maximum design flexibility. TC647VUA Features Applications : Fan Controller base on TC647 number designed with 1 outputs TC647VUA Applications There are a lot of Microchip Technology TC647VUA motor drivers applications. Multiple output capability Side marker lights Display LED backlighting Street lights Running preventive- maintenance diagnostics Digital still cameras Automotive applications Fog lamps Accurate LED current matching Charge pump circuits	PDF	999 In-stock	Get Quote
536-TC642EUA713	Microchip Technology	TC642EUA713 Overview The design includes a package of type [0].Parts are packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)cases.A mounting position of Surface Mountis recommended for the part.As a result, it is appropriate for the component connected to Fan Controller.There is a possibility of providing 3V~5.5Vvolts through the device.In terms of operating temperature, it falls within the range -40°C~85°C TA.The motor type can be classified as Brushless DC (BLDC).There are 8 terminations available in the part.In order to get the best performance from this amplifier, it should be run at 5V.There is Surface Mount recommended mounting method for this device.In this device, the analog IC BRUSHLESS DC MOTOR CONTROLLERis employed.Using the TC642part number, it is located.The device has 8 pins.Drivers controllers belongs to the series [0].The available outputs are [0].Drivers controllers is maintained at a voltage of FanSense?.Having a 5mAoutput current, it provides maximum design flexibility. TC642EUA713 Features Applications : Fan Controller base on TC642 number designed with 1 outputs TC642EUA713 Applications There are a lot of Microchip Technology TC642EUA713 motor drivers applications. Step-up or step-down driver topologies Outdoor area lights Dome Hazardous application Automotive exterior and interior lighting Lighting for the ambience of tunability High brightness LED lighting Display LED backlighting Horticultural lighting Landscape lighting	PDF	999 In-stock	Get Quote
536-TC648EUA	Microchip Technology	TC648EUA Overview The design includes a package of type [0].There is 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case included with the part.Surface Mountshould be used for mounting the part.As a result, it is appropriate for the component connected to Fan Controller.In this case, the device can supply 3V~5.5V volts.The operating temperature ranges from -40°C~85°C TAto -40°C~85°C TA.A Brushless DC (BLDC)motor can be classified as a type of motor.In this part, there are 8 terminations available.This amplifier should be operated at 5V.A Surface Mountmounting method is recommended for this product.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.The part number TC648indicates that it is found.The device has 8 pins.The Motion Control Electronicsseries includes this item.4.4Vis maintained as the output voltage.The motor type can be identified as Brushless DC (BLDC).Having a 5mAoutput current, it provides maximum design flexibility.On it, there are 1 channels.In this case, the frequency is 30Hz. TC648EUA Features Applications : Fan Controller base on TC648 number Motor Type classified as Brushless DC (BLDC) TC648EUA Applications There are a lot of Microchip Technology TC648EUA motor drivers applications. Running preventive- maintenance diagnostics Hospitality buildings Fog lamps Charge pump circuits Large outdoor LED display Architectural lighting parking lights Large format LED backlighting PWM generators Digital still cameras	PDF	999 In-stock	Get Quote
536-ATA6829-T3QY-44	Microchip Technology	ATA6829-T3QY-44 Overview Drivers controllers is designed wDrivers controllersh a package of [0].This part is packaged with a case of [0].In general, it is recommended that the part be mounted by Surface Mount.For the component connected to [0], it is suitable.There is a capability for the device to provide 4.75V~5.25V volts.A range of -40°C~150°C TJis available for operating temperature.A motor of this type can be categorized as Brushed DC.There are 16 terminations available in the part.There is the option of applying the voltage to the load at the rate of 5.6V~40V.Please take in mind that this amplifier should be run at 5V.Maintain the current output of the part at 1.5A volts.Based on the ATA6829part number, it is found. ATA6829-T3QY-44 Features Applications : General Purpose Load voltage across the chip 5.6V~40V base on ATA6829 number ATA6829-T3QY-44 Applications There are a lot of Microchip Technology ATA6829-T3QY-44 motor drivers applications. Architectural lighting Running preventive- maintenance diagnostics Smart lighting applications Building technology Accurate LED current matching PWM generators Human-centric lighting Arena lighting LED ballasts Street lights	PDF	999 In-stock	Get Quote
536-ATA6838C-PXQW	Microchip Technology	ATA6838C-PXQW Overview Drivers controllers includes a Tape & Reel (TR)package.A 24-VQFN Exposed Padcase is included with the part.Drivers controllers is recommended that the part be mounted by Surface Mount.In this case, it is appropriate for the component connected to General Purpose.4.75V~5.25V volts can be supplied by the device.In terms of operating temperature, it falls within the range -40°C~150°C TJ.Drivers controllers is possible to categorize the motor type as Brushed DC.The part has 24terminations available.In this case, the voltage can be applied to the load at the rate of 5.5V~40V.In order to get the best performance from this amplifier, it should be run at 5V.Surface Mountis the recommended mounting method.As a result of the ATA6838Cpart number, it can be found.24 pins are provided for its design.Drivers controllers is part of the series [0].Drivers controllers is maintained at 40V volts.For compliance with the operation requirements, the maximum output current is [0].This device has 6drivers installed. ATA6838C-PXQW Features Applications : General Purpose Load voltage across the chip 5.5V~40V base on ATA6838C number with 6 Drivers ATA6838C-PXQW Applications There are a lot of Microchip Technology ATA6838C-PXQW motor drivers applications. Home lighting systems Architectural lighting AM radio Monitoring the energy that the luminaire uses Automotive applications Step-up or step-down driver topologies Large outdoor LED display Daytime running lights (DRLs) Industrial high-bay lights Outdoor area lights	PDF	999 In-stock	Get Quote
536-ATA6844-PLQW	Microchip Technology	ATA6844-PLQW Overview The package is designed with [0].48-VFQFN Exposed Padcases are included with the part.In general, it is recommended that the part be mounted by Surface Mount.For the component connected to [0], it is suitable.The device is capable of supplying a voltage of 5.25V~32V volts.Regarding the operating temperature, it is in the range of -40°C~200°C TJ°C.Drivers controllers is possible to classify the motor type as Brushless DC (BLDC).This part provides 48terminations.In order to get the best performance from this amplifier, it should be run at 7.3V.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.Based on the ATA6844part number, it is found. ATA6844-PLQW Features Applications : Automotive base on ATA6844 number ATA6844-PLQW Applications There are a lot of Microchip Technology ATA6844-PLQW motor drivers applications. Smart lighting applications Side marker lights drivers for outdoor application Step-up or step-down driver topologies Architectural lighting A cross between entertainment General lighting Fog lamps Horticultural applications Display LED backlighting	PDF	999 In-stock	Get Quote
376-IRMCK172M	Infineon Technologies	IRMCK172M Overview The design includes a package of type [0].The part is packaged in a 48-VFQFN Exposed Pad case.Mounting the part by Surface Mountis recommended.The component connected in Applianceis compatible with it.Drivers controllers is capable of supplying 3V~3.6V volts.Drivers controllers operates wDrivers controllershin a range of -40°C~85°C TAdegrees Celsius.This motor type can be categorized as AC, Induction, Synchronous.A AC MOTOR CONTROLLERanalog integrated circuit is employed in this device.There is iMOTION?, MCE? change in the output voltage. IRMCK172M Features Applications : Appliance IRMCK172M Applications There are a lot of Infineon Technologies IRMCK172M motor drivers applications. Smart lighting applications Hospitality buildings Dome Telltale lights Emergency lighting High brightness LED lighting Camcorders Street lights Infotainment backlighting Building technology	PDF	999 In-stock	Get Quote
536-U209B-MFPY	Microchip Technology	U209B-MFPY Overview The package is designed with [0].The part is packaged in a 16-SOIC (0.154, 3.90mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.The component connected in General Purposeis compatible with it.13V~16.8V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of -10°C~100°C TAdegrees Celsius.There is a motor type AC, Inductionavailable.Ideally, it should be mounted in the Surface Mountposition.Based on the U209Bpart number, it is found.The device has 16 pins.Drivers controllers is possible to access 1outputs.A supply voltage of 16.6Vis required to operate this driver.6Vis maintained as the output voltage.Drivers controllers offers maximum design flexibilDrivers controllersy due to Drivers controllerss 7.5mAoutput current.100°Cis the maximum operating temperature.Controller ic is recommended that the operating temperature exceeds -10°C. U209B-MFPY Features Applications : General Purpose base on U209B number designed with 1 outputs U209B-MFPY Applications There are a lot of Microchip Technology U209B-MFPY motor drivers applications. High power LED street light Large outdoor LED display Commercial office Hospitality buildings Smart lighting applications Automotive applications Dome Dash Footwell lighting Indicator	PDF	16464 In-stock	Get Quote
536-U2008B-MY	Microchip Technology	U2008B-MY Overview Drivers controllers is designed with Tube package.8-DIP (0.300, 7.62mm)cases are included with the part.Ideally, the part should be mounted by Through Hole.As a result, it is appropriate for the component connected to General Purpose.14.5V~16.8V volts can be supplied by the device.This device operates at a temperature range of -10°C~125°C TJ.Drivers controllers is possible to categorize the motor type as AC, Induction.There is a recommended mounting method of Through Hole.Based on the U2008Bpart number, it is found.In this device, there are 8 pins.Drivers controllers is possible to access 1outputs.A voltage of 16.5V is used as the supply voltage for this driver.Having a 125mAoutput current, it provides maximum design flexibility.At its maximum operating temperature, the device reaches 125°C.There should be a temperature higher than -10°Cduring operation.For the purposes of meeting its operation requirements, the maximum output current reaches [0].This device can be used with a maximum voltage of 16.8V.In addition to working at a voltage of 14.6V, it is capable of working at high voltages as well. U2008B-MY Features Applications : General Purpose base on U2008B number designed with 1 outputs U2008B-MY Applications There are a lot of Microchip Technology U2008B-MY motor drivers applications. Alternative to HID lights Commercial office Fog lamps Building technology Street lights High power LED street light AM radio Charge pump circuits Horticultural applications Digital still cameras	PDF	999 In-stock	Get Quote
536-U2008B-MFPY	Microchip Technology	U2008B-MFPY Overview Drivers controllers is designed wDrivers controllersh a package of [0].This part is packed in a 8-SOIC (0.154, 3.90mm Width) case.Drivers controllers is recommended that the part be mounted by Surface Mount.For the component connected to [0], it is suitable.In this case, the device can supply 14.5V~16.8V volts.There is a temperature range of -10°C~125°C TJin which this device operates.Motors can be classified as AC, Induction.The recommended mounting method is Surface Mount.Drivers controllers is based on the U2008B part number.8pins are available on the device.There are 1 outputs available.Drivers controllers offers maximum design flexibilDrivers controllersy since Drivers controllerss output current is 2mA.Controller ic reaches 125°Cat the maximum operating temperature.Ideally, the operating temperature should be greater than -10°C. U2008B-MFPY Features Applications : General Purpose base on U2008B number designed with 1 outputs U2008B-MFPY Applications There are a lot of Microchip Technology U2008B-MFPY motor drivers applications. Smart lighting applications Scanning equipment A cross between entertainment Landscape lighting Large outdoor LED display Horticultural lighting Automotive instrumentation Industrial lighting Camcorders Step-up or step-down driver topologies	PDF	999 In-stock	Get Quote
536-ATA6828-T2QY	Microchip Technology	ATA6828-T2QY Overview The package is designed with [0].The part is packged with 14-SOIC (0.154, 3.90mm Width) case.Drivers controllers is recommended that the part be mounted by Surface Mount.The component connected in General Purposematches it perfectly.In this case, the device can supply 4.75V~5.25V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.This motor type can be categorized as Brushed DC.Drivers controllers is possible to apply voltage to the load at the rate of 5.6V~40V.Maintain a 1.5Aoutput current for the part.Drivers controllers is based on the ATA6828 part number. ATA6828-T2QY Features Applications : General Purpose Load voltage across the chip 5.6V~40V base on ATA6828 number ATA6828-T2QY Applications There are a lot of Microchip Technology ATA6828-T2QY motor drivers applications. Smart lighting applications Automotive applications AM radio Monitoring the energy that the luminaire uses Human-centric lighting Large format LED backlighting Horticultural lighting Multiple output capability LCD displays Large outdoor LED display	PDF	999 In-stock	Get Quote
536-U209B-MFPG3Y	Microchip Technology	U209B-MFPG3Y Overview This package was designed with Tape & Reel (TR)in mind.Drivers controllers is packaged wDrivers controllersh a 16-SOIC (0.154, 3.90mm Width) case.Surface Mountshould be used for mounting the part.The component connected in General Purposematches it perfectly.Drivers controllers is capable of supplying 13V~16.8V volts.There is a temperature range of -10°C~100°C TAin which this device operates.In this case, the motor type is AC, Induction.Surface Mountis the recommended mounting method.Drivers controllers is based on the U209B part number.In this device, there are 16 pins.1outputs are available.Drivers controllers offers maximum design flexibilDrivers controllersy wDrivers controllersh a 7.5mAoutput current.Controller ic reaches a maximum operating temperature of 100°C.There should be a temperature higher than -10°Cduring operation. U209B-MFPG3Y Features Applications : General Purpose base on U209B number designed with 1 outputs U209B-MFPG3Y Applications There are a lot of Microchip Technology U209B-MFPG3Y motor drivers applications. Human-centric lighting Matrix LED dimmers LCD displays Hidden coves in high-end residential settings Footwell lighting High power LED street light Commercial office Automotive applications Telltale lights Indicator circuit	PDF	999 In-stock	Get Quote
536-MIC502YM-TR	Microchip Technology	MIC502YM-TR Overview The design contains a Tape & Reel (TR)package.8-SOIC (0.154, 3.90mm Width)cases are included with the part.Drivers controllers is recommended that the part be mounted by Surface Mount.The component connected in Fan Controllermatches it perfectly.In this case, the device can supply 4V~13.2V volts.There is a temperature range of -40°C~85°C TAin which this device operates.Motors can be classified as Brushless DC (BLDC).A total of 8terminations are available in the part.The amplifier should be set to 5V.The device employs the BRUSHLESS DC MOTOR CONTROLLER analog IC.The MIC502part number allows us to locate it. MIC502YM-TR Features Applications : Fan Controller base on MIC502 number MIC502YM-TR Applications There are a lot of Microchip Technology MIC502YM-TR motor drivers applications. CHMSL (center high-mount stop lamps) RGB and monochromatic LED drivers for signage and traffic signals Dome Telltale lights Architectural lighting Camera-enabled smartphones High power LED street light LCD displays Tunnel lights LED bias	PDF	999 In-stock	Get Quote
761-L6228N	STMicroelectronics	L6228N Overview This package is designed to work with [0].Drivers controllers is packaged wDrivers controllersh a 24-PowerDIP (0.300, 7.62mm) case.To mount the part by [0], it is recommended that you do so.In this case, it is appropriate for the component connected to General Purpose.8V~52V volts can be supplied by the device.There is a temperature range of -25°C~125°C TJin which this device operates.In this case, the voltage can be applied to the load at the rate of 8V~52V.Through Holeis its recommended mounting method.The L6228part number is used to locate the part.24pins are used in its design.4outputs are available in total.Drivers controllers is maintained at 52V volts.In this case, the output voltage is kept at STSPIN L62 volts.This motor type can be recognized as Stepper.This device operates on 1.4Asupply current. L6228N Features Applications : General Purpose Load voltage across the chip 8V~52V base on L6228 number designed with 4 outputs Motor Type classified as Stepper L6228N Applications There are a lot of STMicroelectronics L6228N motor drivers applications. Hidden coves in high-end residential settings Automotive applications Hazardous application Arena lighting LCD displays Turn signals Building technology LED ballasts AM radio PWM generators	PDF	999 In-stock	Get Quote
761-L6226N	STMicroelectronics	L6226N Overview The design includes a package of type [0].There is 24-PowerDIP (0.300, 7.62mm) case included with the part.In most cases, it is recommended to mount the part at Through Hole.In this case, it is appropriate for the component connected to General Purpose.There is a possibility of providing 8V~52Vvolts through the device.In terms of operating temperature, it falls within the range -25°C~125°C TJ.A motor of this type can be categorized as Brushed DC.If the voltage is applied to the load at the rate of [0], the load will be affected.In terms of mounting, it is recommended that it be mounted in Through Hole.Drivers controllers is based on the L6226 part number.This device is designed with a pin count of 24.There are 4 outputs available.The driver operates from a supply voltage of 48V volts.There is STSPIN L62 change in the output voltage.The motor type can be identified as Brushed.Its maximal output current reaches 2.8A to meet the operation requirements. L6226N Features Applications : General Purpose Load voltage across the chip 8V~52V base on L6226 number designed with 4 outputs Motor Type classified as Brushed L6226N Applications There are a lot of STMicroelectronics L6226N motor drivers applications. Commercial office Outdoor area lights RGB and monochromatic LED drivers for signage and traffic signals High power LED street light Hospitality buildings Handheld devices LED bias Horticultural lighting Large format LED backlighting Telltale lights	PDF	999 In-stock	Get Quote
815-LM4570LQX/NOPB	Texas Instruments	LM4570LQX/NOPB Overview Drivers controllers is designed with Tape & Reel (TR) package.This part is packaged with a case of [0].A mounting position of Surface Mountis recommended for the part.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.A device with a voltage range of 2.4V~5.5V volts is available.With regard to operating temperature, it ranges -40°C~150°C TJ. A Brushed DCmotor can be classified as a type of motor.The part has 8terminations available.You can apply voltage at 2.4V~5.5Vto the load.Please take in mind that this amplifier should be run at 3V.The recommended mounting method is Surface Mount.Maintain a current of 192mAfor the part output.A BRUSH DC MOTOR CONTROLLERanalog IC is employed in this device.As a result of the LM4570part number, it can be found.This device is designed with a pin count of 8.The item belongs to the Motion Control Electronics series.1outputs are available. LM4570LQX/NOPB Features Applications : General Purpose Load voltage across the chip 2.4V~5.5V base on LM4570 number designed with 1 outputs LM4570LQX/NOPB Applications There are a lot of Texas Instruments LM4570LQX/NOPB motor drivers applications. Automotive applications parking lights Footwell lighting General lighting Large format LED backlighting Horticultural lighting AM radio Emergency lighting Multiple output capability Display LED backlighting	PDF	999 In-stock	Get Quote
376-TLE4205NKLA1	Infineon Technologies	TLE4205NKLA1 Overview This package was designed with Tubein mind.A 18-DIP (0.300, 7.62mm)case is included with the part.Drivers controllers is recommended to mount the part by Through Hole.For the component connected to [0], it is suitable.The device can supply 6V~32V volts.Operation temperature ranges from -40°C~150°C TJ.This motor type can be categorized as Brushed DC.There are 18 terminations available in the part.A voltage of 6V~32Vcan be applied to the load.Ensure that the part output current remains at 1A.In this device, the analog IC BRUSH DC MOTOR CONTROLLERis employed.Based on the TLE4205part number, it is found. TLE4205NKLA1 Features Applications : Automotive Load voltage across the chip 6V~32V base on TLE4205 number TLE4205NKLA1 Applications There are a lot of Infineon Technologies TLE4205NKLA1 motor drivers applications. Outdoor area lights Handheld devices Hidden coves in high-end residential settings Running preventive- maintenance diagnostics Scanning equipment Smart lighting applications Telltale lights PDAs Alternative to HID lights Footwell lighting	PDF	999 In-stock	Get Quote
815-L293DWP	Texas Instruments	L293DWP Overview Drivers controllers includes a Tubepackage.The part is packged with 28-SOIC (0.295, 7.50mm Width) Exposed Pad case.Drivers controllers is recommended to mount the part by Surface Mount.This component is suitable for the component connected to General Purpose.This device is capable of supplying voltages up to 4.5V~36V volts.The operating temperature ranges from 0°C~70°C TAto 0°C~70°C TA.Drivers controllers is possible to categorize the motor type as Brushed DC.This part provides 28terminations.Drivers controllers is possible to apply voltage at a rate of 4.5V~36Vto the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.Ideally, it should be mounted in the Surface Mountposition.As a result of the L293part number, it can be found.This device is designed with a pin count of 28.Continually maintains the output voltage at 36V.In order to achieve the operation requirements, the maximal output current reaches [0].There are 4drivers installed in it. L293DWP Features Applications : General Purpose Load voltage across the chip 4.5V~36V base on L293 number with 4 Drivers L293DWP Applications There are a lot of Texas Instruments L293DWP motor drivers applications. AM radio Building technology Running preventive- maintenance diagnostics LED ballasts Scanning equipment LED bias Camera-enabled smartphones Architectural lighting Automotive instrumentation Smart lighting applications	PDF	999 In-stock	Get Quote
376-TDA21801	Infineon Technologies	TDA21801 Overview The design contains a Tape & Reel (TR)package.This part is packed in a 8-SOIC (0.154, 3.90mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.The component connected in Fan Controlleris compatible with it.A device with a voltage range of 10.8V~13.2V volts is available.A range of 0°C~70°C TAis available for operating temperature.A motor of this type can be categorized as Brushed DC.The part supports 8terminations.The amplifier should be set to 12V.Surface Mountis its recommended mounting method.This device utilizes the AC MOTOR CONTROLLERanalog integrated circuit.The TDA21801part number is used to locate the part.8 pins are provided for its design.Drivers controllers is a part of the Motion Control Electronics series.There are 1 outputs available.The supply voltage for this driver is 12V. TDA21801 Features Applications : Fan Controller base on TDA21801 number designed with 1 outputs TDA21801 Applications There are a lot of Infineon Technologies TDA21801 motor drivers applications. Street lights Automotive instrumentation AM radio High brightness LED lighting Hazardous application Architectural lighting Smart lighting applications RGB and monochromatic LED drivers for signage and traffic signals High power LED street light Mobile phone display backlight and key light driving	PDF	999 In-stock	Get Quote
815-L293N	Texas Instruments	L293N Description The L293N is a 16-pin DIP quadruple high-current half-H driver. The L293N driver is intended for use in positive supply applications with inductive loads like as relays, solenoids, DC and bipolar stepping motors, and other high current/high voltage loads. TTL is supported by all inputs. Each output is a full totem pole drive circuit with a darlington transistor sink and a pseudo darlington source. L293N Features ? Logic Voltage: 5V ? Driver Voltage: 5-35V ? Driver Current:2A ? Logical Current:0-36mA ? Driver Model: L298N 2A ? Maximum Power (W): 25W ? Driver Chip: Double H Bridge L298N ? Motor Supply Voltage (Maximum): 46V ? Motor Supply Current (Maximum): 2A ? Current Sense for each motor ? Heatsink for better performance ? Power-On LED indicator L293N Applications ? In Robotics ? Drive DC motors. ? Drive stepping motors ? Motor Drive & Control ? Stepper Motor Drivers ? DC Motor Drivers ? Latching Relay Drivers	PDF	999 In-stock	Get Quote
761-L292H	STMicroelectronics	L292H Overview The package is designed with [0].15-SSIP Exposed Pad, Formed Leadscases are included with the part.Drivers controllers is recommended that the part be mounted by Through Hole.The component connected in General Purposeis compatible with it.There is a capability for the device to provide 18V~36V volts.Drivers controllers operates wDrivers controllershin a range of -40°C~150°C TJdegrees Celsius.A motor of this type can be categorized as Brushed DC.There are 15 terminations available in the part.At a rate of [0], voltage can be applied to the load.This amplifier should be operated at 36V.Through Holeis its recommended mounting method.Set the part's output current to 2A.In this device, the analog IC BRUSH DC MOTOR CONTROLLERis employed.Using the L292part number, it is located.In this device, there are 15 pins.Drivers controllers operates from a voltage of 36V volts. L292H Features Applications : General Purpose Load voltage across the chip 18V~36V base on L292 number L292H Applications There are a lot of STMicroelectronics L292H motor drivers applications. Landscape lighting Step-up or step-down driver topologies Tunnel lights Hidden coves in high-end residential settings Brake lights Fog lamps Turn signals Industrial lighting Commercial office Charge pump circuits	PDF	999 In-stock	Get Quote
376-TLE7209-2R	Infineon Technologies	TLE7209-2R Overview The package is designed with [0].Drivers controllers is packaged wDrivers controllersh a 20-PowerSOIC (0.433, 11.00mm Width) case.To mount the part by [0], it is recommended that you do so.The component connected in General Purposematches it perfectly.Drivers controllers is capable of supplying 5V~28V volts.This device operates at a temperature of -40°C~150°C TJ.A motor of this type can be categorized as Brushed DC.This part offers 20terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.The output current should be kept at 5A for the part.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in this device.According to the TLE7209part number, the part is found.Drivers controllers belongs to Motion Control Electronics series. TLE7209-2R Features Applications : General Purpose Load voltage across the chip 5V~28V base on TLE7209 number TLE7209-2R Applications There are a lot of Infineon Technologies TLE7209-2R motor drivers applications. Camera-enabled smartphones Tail lights Human-centric lighting LCD displays Multiple output capability Hospitality buildings Indicator Street lights Lighting for the ambience of tunability Large format LED backlighting	PDF	999 In-stock	Get Quote