Multifunction(3130)

Part	Manufacturer	Description		Stock	Action
815-DRV83053PHPR	Texas Instruments	DRV83053PHPR Description The DRV83053PHPR is a gate driver IC for three-phase motor-drive applications. The driver DRV83053PHPR provides three high-accuracy and temperature compensated half-bridge drivers, each capable of driving a high-side and low-side N-channel MOSFET. A charge pump driver supports 100% duty cycle and low-voltage operation. The DRV83053PHPR can tolerate load dump voltages up to 45-V. DRV83053PHPR Features 4.4-V to 45-V Operating Voltage 1.25-A and 1-A Peak Gate Drive Currents Programmable High- and Low-Side Slew-Rate Control Charge-Pump Gate Driver for 100% Duty Cycle Three Integrated Current-Shunt Amplifiers Integrated 50-mA LDO (3.3-V and 5-V Option) 3-PWM or 6-PWM Input Control up to 200 kHz Single PWM-Mode Commutation Capability DRV83053PHPR Applications Three-Phase BLDC and PMSM Motors CPAP and Pumps Robotics and RC Toys Power Tools Industrial Automation	PDF	999 In-stock	Get Quote
376-IRMCK171TR	Infineon Technologies	IRMCK171TR Overview This package is designed to work with [0].This part is packaged with a case of [0].Ideally, the part should be mounted by Surface Mount.I believe it would be suitable for the component connected to Appliance.3V~3.6V volts can be supplied by the device.In terms of operating temperature, it falls within the range -40°C~85°C TA.The motor type can be classified as AC, Induction, Synchronous.There is Surface Mount recommended mounting method for this device.As a result of the IRMCK171part number, it can be found.There are 48 pins on it.The driver operates from a supply voltage of 3.3V volts.In this case, the output voltage is maintained at MCE?. IRMCK171TR Features Applications : Appliance base on IRMCK171 number IRMCK171TR Applications There are a lot of Infineon Technologies IRMCK171TR motor drivers applications. PWM generators Brake lights Lighting for the ambience of tunability Dome Matrix LED dimmers Human-centric lighting Large format LED backlighting Charge pump circuits A cross between entertainment Horticultural applications	PDF	999 In-stock	Get Quote
376-IRMCF341TR	Infineon Technologies	IRMCF341TR Overview This package was designed with Tape & Reel (TR)in mind.A 64-LQFPcase is included with the part.To mount the part by [0], it is recommended that you do so.Drivers controllers is fDrivers controllersting for the component connected in Appliance.A device with a voltage range of 1.62V~1.98V 3V~3.6V volts is available.A range of -40°C~85°C TAis available for operating temperature.In this case, the motor type is AC, Synchronous.A total of 64terminations are available in this part.This amplifier should be operated at 3.3V.In this device, the analog IC AC MOTOR CONTROLLERis employed.The IRMCF341part number allows us to locate it.Keeps the output voltage at MCE?at all times.A characteristic IT CAN ALSO OPERATE WITH 1.8V INPUT SUPPLYis also associated with it. IRMCF341TR Features Applications : Appliance base on IRMCF341 number Additional Feature: IT CAN ALSO OPERATE WITH 1.8V INPUT SUPPLY IRMCF341TR Applications There are a lot of Infineon Technologies IRMCF341TR motor drivers applications. Smart lighting applications Side marker lights Hazardous application Multiple output capability Emergency lighting drivers for outdoor application Large outdoor LED display RGB and monochromatic LED drivers for signage and traffic signals Large format LED backlighting Running preventive- maintenance diagnostics	PDF	999 In-stock	Get Quote
376-IRMCK371TR	Infineon Technologies	IRMCK371TR Overview The package contains [0].Parts are packaged in 48-LQFPcases.In general, it is recommended that the part be mounted by Surface Mount.I believe it is suitable for the component connected to Appliance.The device is capable of supplying a voltage of 1.62V~1.98V 3V~3.6V volts.With regard to operating temperature, it ranges -40°C~85°C TA. There is a motor type AC, Synchronousassociated with this motor type.This part provides 48terminations.The amplifier should be set to 3.3V.Ideally, it should be mounted in the Surface Mountposition.A AC MOTOR CONTROLLERanalog integrated circuit is employed in this device.Drivers controllers is based on the IRMCK371 part number.In this device, there are 48 pins.Drivers controllers belongs to Motion Control Electronics series.Currently, there are 1 outputs available.A voltage of 3.3V is used as the supply voltage for this driver.MCE? is the main series of the part. IRMCK371TR Features Applications : Appliance base on IRMCK371 number designed with 1 outputs IRMCK371TR Applications There are a lot of Infineon Technologies IRMCK371TR motor drivers applications. Indicator Fog lamps Telltale lights Building technology Automotive exterior and interior lighting Footwell lighting Large format LED backlighting Horticultural applications Home lighting systems LED ballasts	PDF	999 In-stock	Get Quote
815-DRV8704DCPR	Texas Instruments	DRV8704DCPR Overview Drivers controllers is designed with Tape & Reel (TR) package.38-TFSOP (0.173, 4.40mm Width) Exposed Padcases are included with the part.Drivers controllers is recommended that the part be mounted by Surface Mount.Fits the component connected to General Purpose.There is a capability for the device to provide 0V~5.3V volts.In terms of operating temperature, it falls within the range -40°C~85°C TA.This motor type can be categorized as Brushed DC.There are 38 terminations available in the part.If the voltage is applied to the load at the rate of [0], the load will be affected.You should run this amplifier at 1.8V.The recommended way to mount it is Surface Mount.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.The DRV8704part number allows us to locate it.38pins are present on the device.Drivers controllers is possible to access 2outputs.Drivers controllers offers maximum design flexibilDrivers controllersy due to Drivers controllerss 400mAoutput current. DRV8704DCPR Features Applications : General Purpose Load voltage across the chip 8V~52V base on DRV8704 number designed with 2 outputs DRV8704DCPR Applications There are a lot of Texas Instruments DRV8704DCPR motor drivers applications. Matrix LED dimmers Tunnel lights Large format LED backlighting LCD displays AM radio Building technology Telltale lights High power LED street light Lighting for the ambience of tunability High brightness LED lighting	PDF	999 In-stock	Get Quote
761-L6208PD	STMicroelectronics	L6208PD Overview Drivers controllers includes a Tubepackage.This part is packed in a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad case.To mount the part by [0], it is recommended that you do so.The component connected in General Purposeis compatible with it.The device is capable of supplying a voltage of 8V~52V volts.In terms of operating temperature, it falls within the range -25°C~125°C TJ.This part offers 36terminations.Voltage can be applied at a rate of 8V~52V volts to the load.Drivers controllers is important to remember that this amplifier should be run at 48V.Ideally, it should be mounted in the Surface Mountposition.L6208is the part number that finds it.36pins are present on the device.In the Motion Control Electronicsseries, it is included.This driver operates from a supply voltage of 48V.52Vis maintained as the output voltage.In this case, STSPIN L62is maintained as the output voltage.The motor type can be identified as Stepper.For optimal operation, its maximum output current reaches [0].The supply current used for its operating is 10mA.A total of 4channels are available. L6208PD Features Applications : General Purpose Load voltage across the chip 8V~52V base on L6208 number Motor Type classified as Stepper L6208PD Applications There are a lot of STMicroelectronics L6208PD motor drivers applications. Matrix LED dimmers Mobile phone display backlight and key light driving PWM generators LED ballasts Camcorders Large format LED backlighting Building technology Lighting for the ambience of tunability LCD displays Dash	PDF	999 In-stock	Get Quote
536-TC649BEOA	Microchip Technology	TC649BEOA Overview Drivers controllers is designed wDrivers controllersh a package of [0].Drivers controllers comes in a 8-SOIC (0.154, 3.90mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.The component connected in Fan Controlleris compatible with it.A device with a voltage range of 3V~5.5V volts is available.With regard to operating temperature, it ranges -40°C~85°C TA. Drivers controllers is possible to categorize the motor type as Brushless DC (BLDC).The part has 8terminations available.Drivers controllers is important to remember that this amplifier should be run at 5V.A Surface Mountmounting method is recommended for this product.This device utilizes the BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit.This can be determined by looking at the TC649 part number.8pins are used in its design.Drivers controllers belongs to the series [0].A voltage of 4.4Vis maintained at the output.FanSense?is maintained as the output voltage.Drivers controllers offers maximum design flexibilDrivers controllersy wDrivers controllersh a 5mAoutput current.Currently, there are 1 channels available.The frequency that can be achieved is 30Hz. TC649BEOA Features Applications : Fan Controller base on TC649 number TC649BEOA Applications There are a lot of Microchip Technology TC649BEOA motor drivers applications. Charge pump circuits Architectural lighting Side marker lights Footwell lighting Step-up or step-down driver topologies PDAs Home lighting systems Handheld devices Camera-enabled smartphones Dash	PDF	999 In-stock	Get Quote
815-DRV8860PW	Texas Instruments	DRV8860PW Overview This package was designed with Tubein mind.Drivers controllers is packaged wDrivers controllersh a 16-TSSOP (0.173, 4.40mm Width) case.Ideally, the part should be mounted by Surface Mount.In this case, it is appropriate for the component connected to General Purpose.Drivers controllers is capable of supplying 8V~38V volts.This device operates at a temperature range of -40°C~150°C TJ.There is a motor type Brushed DCassociated with this motor type.A voltage of 8V~38Vcan be applied to the load.Ideally, it should be mounted in the Surface Mountposition.Maintain a 200mAoutput current for the part.As a result of the DRV8860part number, it can be found.16 pins are provided for its design.There are 8 outputs available.The motor type can be identified as Stepper. DRV8860PW Features Applications : General Purpose Load voltage across the chip 8V~38V base on DRV8860 number designed with 8 outputs Motor Type classified as Stepper DRV8860PW Applications There are a lot of Texas Instruments DRV8860PW motor drivers applications. Scanning equipment Architectural lighting Alternative to HID lights Arena lighting Horticultural lighting Home lighting systems Horticultural applications Brake lights Fog lamps Matrix LED dimmers	PDF	999 In-stock	Get Quote
536-MTS2916A-HGC1	Microchip Technology	MTS2916A-HGC1 Overview The package contains [0].Drivers controllers is packaged wDrivers controllersh a 24-SOIC (0.295, 7.50mm Width) case.Ideally, the part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.Drivers controllers is capable of supplying 4.5V~5.5V volts.There is a temperature range of -40°C~150°C TJin which this device operates.In this case, the motor type is Brushed DC.A total of 24terminations are available in the part.If the voltage is applied to the load at the rate of [0], the load will be affected.This amplifier should be operated at 5V.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.Using the MTS2916Apart number, it is located.Drivers controllers is designed wDrivers controllersh 24 pins.In the Motion Control Electronicsseries, it is included.A supply voltage of 30Vis required to operate this driver.In this case, 40Vis maintained as the output voltage.2channels are available. MTS2916A-HGC1 Features Applications : General Purpose Load voltage across the chip 10V~40V base on MTS2916A number MTS2916A-HGC1 Applications There are a lot of Microchip Technology MTS2916A-HGC1 motor drivers applications. Fog lamps Running preventive- maintenance diagnostics Commercial office Hazardous application Monitoring the energy that the luminaire uses Indicator LED ballasts Horticultural lighting Daytime running lights (DRLs) drivers for outdoor application	PDF	999 In-stock	Get Quote
536-TC665EUN	Microchip Technology	TC665EUN Overview The package contains [0].Drivers controllers comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.This component is suitable for the component connected to Fan Controller.There is a possibility of providing 3V~5.5Vvolts through the device.In terms of operating temperature, it falls within the range -40°C~85°C TA.A motor of this type can be categorized as Brushless DC (BLDC).In this part, there are 10 terminations available.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.Surface Mountis the recommended mounting method.There is an analog integrated circuit BRUSHLESS DC MOTOR CONTROLLERpresent in the device.According to the TC665part number, the part is found.There are 10 pins on it.Drivers controllers is part of the series [0].Continually maintains the output voltage at 4.4V.As it has a 5mAoutput current, it provides maximum design flexibility.On it, there are 1 channels.30Hzis the frequency that can be achieved. TC665EUN Features Applications : Fan Controller base on TC665 number TC665EUN Applications There are a lot of Microchip Technology TC665EUN motor drivers applications. A cross between entertainment Outdoor area lights Digital still cameras Dash Lighting for health and wellbeing Footwell lighting Camera-enabled smartphones Turn signals CHMSL (center high-mount stop lamps) Indicator circuit	PDF	999 In-stock	Get Quote
815-DRV8702DQRHBTQ1	Texas Instruments	DRV8702DQRHBTQ1 Overview The package is designed with [0].Drivers controllers is packaged wDrivers controllersh a 32-VFQFN Exposed Pad case.A mounting position of Surface Mount, Wettable Flankis recommended for the part.Fits the component connected to Brushed DC.5.5V~45V volts can be supplied by the device.Operation temperature ranges from -40°C~150°C TJ.The motor type can be classified as Brushed DC.This part has 32termination options.You should run this amplifier at 13.5V.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.The DRV8702part number is used to locate the part.This device is designed with a pin count of 32.Continually maintains the output voltage at Automotive, AEC-Q100. DRV8702DQRHBTQ1 Features Applications : Brushed DC base on DRV8702 number DRV8702DQRHBTQ1 Applications There are a lot of Texas Instruments DRV8702DQRHBTQ1 motor drivers applications. Alternative to HID lights Building technology Multiple output capability PDAs Horticultural applications Infotainment backlighting Telltale lights Running preventive- maintenance diagnostics Handheld devices High brightness LED lighting	PDF	999 In-stock	Get Quote
536-TC642EOA	Microchip Technology	TC642EOA Overview Drivers controllers is designed with Tube package.There is 8-SOIC (0.154, 3.90mm Width) case included with the part.In most cases, it is recommended to mount the part at Surface Mount.The component connected in Fan Controlleris compatible with it.The device can supply 3V~5.5V volts.With regard to operating temperature, it ranges -40°C~85°C TA. A motor of this type can be categorized as Brushless DC (BLDC).This part has 8termination options.This amplifier should be operated at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.Drivers controllers is based on the TC642 part number.This device is designed with a pin count of 8.In the Motion Control Electronicsseries, it is included.In this case, the output voltage is maintained at 4.4V.Keeps the output voltage at FanSense?at all times.Having a 5mAoutput current, it provides maximum design flexibility.Currently, there are 1 channels available.Controller ic is possible to reach a frequency of 30Hz. TC642EOA Features Applications : Fan Controller base on TC642 number TC642EOA Applications There are a lot of Microchip Technology TC642EOA motor drivers applications. Home lighting systems Handheld devices Daytime running lights (DRLs) Landscape lighting Digital still cameras Monitoring the energy that the luminaire uses Hazardous application Infotainment backlighting High brightness LED lighting Charge pump circuits	PDF	999 In-stock	Get Quote
815-DRV8876NPWPT	Texas Instruments	DRV8876NPWPT Overview This package is designed to work with [0].Drivers controllers comes in a 16-PowerTSSOP (0.173, 4.40mm Width) case.The part should be mounted by Surface Mount.Fits the component connected to DC Motors, General Purpose, Stepper Motors.In this case, the device can supply 0V~5.5V volts.With regard to operating temperature, it ranges -40°C~125°C TA. Motors can be classified as Brushed DC.In this part, there are 16 terminations available.At a rate of [0], voltage can be applied to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 24V.Maintain the current output of the part at 3.5A volts.The device utilizes the IC BRUSH DC MOTOR CONTROLLERwhich is an analog IC.Using the DRV8876part number, it is located. DRV8876NPWPT Features Applications : DC Motors, General Purpose, Stepper Motors Load voltage across the chip 4.5V~37V base on DRV8876 number DRV8876NPWPT Applications There are a lot of Texas Instruments DRV8876NPWPT motor drivers applications. Outdoor area lights Large outdoor LED display parking lights Hazardous application RGB and monochromatic LED drivers for signage and traffic signals Infotainment backlighting Emergency lighting Telltale lights High brightness LED lighting Fog lamps	PDF	999 In-stock	Get Quote
536-MTD6501C-HC1	Microchip Technology	MTD6501C-HC1 Overview The design contains a Tubepackage.This part is packed in a 8-SOIC (0.154, 3.90mm Width) Exposed Pad case.In most cases, it is recommended to mount the part at Surface Mount.For the component connected to [0], it is suitable.The device is capable of supplying a voltage of 2V~14V volts.With regard to operating temperature, it ranges -30°C~150°C TJ. A Brushless DC (BLDC)motor can be classified as a type of motor.This part provides 8terminations.There is the option of applying the voltage to the load at the rate of 2V~14V.You should run this amplifier at 5V.Maintain a 800mAoutput current for the part.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.The MTD6501part number allows us to locate it.Drivers controllers belongs to the Motion Control Electronics series.The number of outputs available is [0]. MTD6501C-HC1 Features Applications : Fan Motor Driver Load voltage across the chip 2V~14V base on MTD6501 number designed with 1 outputs MTD6501C-HC1 Applications There are a lot of Microchip Technology MTD6501C-HC1 motor drivers applications. Commercial office Multiple output capability Large outdoor LED display Fog lamps Camcorders Building technology General lighting Camera-enabled smartphones Hospitality buildings Automotive exterior and interior lighting	PDF	999 In-stock	Get Quote
815-DRV3201QPAPQ1	Texas Instruments	DRV3201QPAPQ1 Overview The design contains a Traypackage.This part is packaged with a case of [0].In most cases, it is recommended to mount the part at Surface Mount.I believe it is suitable for the component connected to Automotive.4.75V~30V volts can be supplied by the device.A range of -40°C~125°C TAis available for operating temperature.Drivers controllers is possible to classify the motor type as Brushless DC (BLDC).There are 64 terminations available on this part.In order to get the best performance from this amplifier, it should be run at 14V.The recommended mounting method is Surface Mount.In this device, the analog IC BRUSHLESS DC MOTOR CONTROLLERis employed.The DRV3201part number is used to locate the part.64pins are available on the device.In the Motion Control Electronicsseries, it is included.There are 2 outputs available.Keeps the output voltage at Automotive, AEC-Q100at all times.Drivers controllers offers maximum design flexibilDrivers controllersy due to Drivers controllerss 1Aoutput current.Also, it is characterized by a ALSO OPERATES WITH THE RANGE OF 3V TO 40V SUPPLY. DRV3201QPAPQ1 Features Applications : Automotive base on DRV3201 number designed with 2 outputs Additional Feature: ALSO OPERATES WITH THE RANGE OF 3V TO 40V SUPPLY DRV3201QPAPQ1 Applications There are a lot of Texas Instruments DRV3201QPAPQ1 motor drivers applications. Camcorders Outdoor area lights Arena lighting parking lights Turn signals Monitoring the energy that the luminaire uses Tunnel lights Infotainment backlighting Display LED backlighting Brake lights	PDF	999 In-stock	Get Quote
761-L6226D	STMicroelectronics	L6226D Overview Drivers controllers is designed wDrivers controllersh a package of [0].Parts are packaged in 24-SOIC (0.295, 7.50mm Width)cases.The part should be mounted by Surface Mount.In this case, it is appropriate for the component connected to General Purpose.There is a possibility of providing 8V~52Vvolts through the device.This device operates at a temperature of -25°C~125°C TJ.The motor type can be classified as Brushed DC.A total of 24terminations are available in the part.Drivers controllers is possible to apply voltage at a rate of 8V~52Vto the load.Drivers controllers is important to note that this amplifier should be operated at the 48Vsetting.The recommended mounting method is Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.Based on the L6226part number, it is found.24pins are used in its design.The item belongs to the Motion Control Electronics series.Drivers controllers is possible to access 4outputs.The driver operates from a supply voltage of 48V volts.Continually maintains the output voltage at 52V.STSPIN L62is maintained as the output voltage.0 indicates that the motor type is [0].In order to achieve the operation requirements, the maximal output current reaches [0]. L6226D Features Applications : General Purpose Load voltage across the chip 8V~52V base on L6226 number designed with 4 outputs Motor Type classified as Brushed L6226D Applications There are a lot of STMicroelectronics L6226D motor drivers applications. General lighting Turn signals Monitoring the energy that the luminaire uses Industrial high-bay lights Display LED backlighting Horticultural lighting LED ballasts AM radio Accurate LED current matching Arena lighting	PDF	999 In-stock	Get Quote
815-DRV8832DGQ	Texas Instruments	DRV8832DGQ Overview The design contains a Tubepackage.This part is packaged with a case of [0].The part should be mounted by Surface Mount.In this case, it is appropriate for the component connected to Battery Powered.The device can supply 2.75V~6.8V volts.With regard to operating temperature, it ranges -40°C~150°C TJ. There is a motor type Brushed DCavailable.The part has 10terminations available.The voltage can applied to the load at the rate of 2.75V~6.8V.Please take in mind that this amplifier should be run at 3V.The recommended mounting method is Surface Mount.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.The part number DRV8832indicates that it is found.In this device, there are 10 pins.Drivers controllers belongs to the series [0].There are 1 outputs available.Drivers controllers is possible to recognize Brushedas the type of motor. DRV8832DGQ Features Applications : Battery Powered Load voltage across the chip 2.75V~6.8V base on DRV8832 number designed with 1 outputs Motor Type classified as Brushed DRV8832DGQ Applications There are a lot of Texas Instruments DRV8832DGQ motor drivers applications. Matrix LED dimmers Handheld devices Large outdoor LED display Footwell lighting Automotive applications General lighting Daytime running lights (DRLs) Lighting for the ambience of tunability Outdoor area lights Automotive instrumentation	PDF	999 In-stock	Get Quote
815-DRV8601DRBT	Texas Instruments	DRV8601DRBT Overview This package was designed with Tape & Reel (TR)in mind.The part is packged with 8-VDFN Exposed Pad case.In most cases, it is recommended to mount the part at Surface Mount.This component is suitable for the component connected to Haptic Feedback.A device with a voltage range of 2.5V~5.5V volts is available.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.Drivers controllers is possible to categorize the motor type as ERM, LRA.This part has 8termination options.There is the option of applying the voltage to the load at the rate of 2.5V~5.5V.The amplifier should be set to 3.3V.Maintain a current of 400mA for the part output.There is an analog integrated circuit BRUSH DC MOTOR CONTROLLERpresent in the device.The DRV8601part number allows us to locate it.In this device, there are 8 pins.Drivers controllers belongs to the series [0].Drivers controllers is possible to access 1outputs.A constant voltage is maintained at 5.5V. DRV8601DRBT Features Applications : Haptic Feedback Load voltage across the chip 2.5V~5.5V base on DRV8601 number designed with 1 outputs DRV8601DRBT Applications There are a lot of Texas Instruments DRV8601DRBT motor drivers applications. Automotive applications High brightness LED lighting Street lights Large outdoor LED display Home lighting systems CHMSL (center high-mount stop lamps) High brightness LED lighting Horticultural applications Accurate LED current matching Telltale lights	PDF	999 In-stock	Get Quote
536-MTD6508-ADJE/JQ	Microchip Technology	MTD6508-ADJE/JQ Overview Drivers controllers includes a Tubepackage.A 16-UQFN Exposed Padcase is included with the part.In most cases, it is recommended to mount the part at Surface Mount.The component connected in General Purposeis compatible with it.A device with a voltage range of 2V~5.5V volts is available.Operation temperature ranges from -40°C~125°C TA.A Brushless DC (BLDC)motor can be classified as a type of motor.A total of 16terminations are available in this part.Voltage can be applied at a rate of 2V~5.5V volts to the load.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.The recommended mounting method is Surface Mount.The output current should be kept at 1A for the part.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.Drivers controllers is based on the MTD6508 part number.This device is designed with a pin count of 16.Currently, there are 1 outputs available.Brushless DC (BLDC)can be recognized as a motor type.There are 3 channels on it. MTD6508-ADJE/JQ Features Applications : General Purpose Load voltage across the chip 2V~5.5V base on MTD6508 number designed with 1 outputs Motor Type classified as Brushless DC (BLDC) MTD6508-ADJE/JQ Applications There are a lot of Microchip Technology MTD6508-ADJE/JQ motor drivers applications. drivers for outdoor application Human-centric lighting Indicator circuit High brightness LED lighting AM radio Camera-enabled smartphones Charge pump circuits Automotive exterior and interior lighting LED bias RGB and monochromatic LED drivers for signage and traffic signals	PDF	999 In-stock	Get Quote
536-TC642BEUA	Microchip Technology	TC642BEUA Overview Drivers controllers includes a Tubepackage.The part is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.This component is suitable for the component connected to Fan Controller.The device is capable of supplying a voltage of 3V~5.5V volts.In terms of operating temperature, it falls within the range -40°C~85°C TA.There is a motor type Brushless DC (BLDC)associated with this motor type.This part provides 8terminations.You should run this amplifier at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.In this device, the analog IC BRUSHLESS DC MOTOR CONTROLLERis employed.According to the TC642part number, the part is found.A device with 8pins is available.Drivers controllers belongs to the Motion Control Electronics series.At [0], the output voltage is maintained.Continually maintains the output voltage at FanSense?.Drivers controllers offers maximum design flexibilDrivers controllersy due to Drivers controllerss 5mAoutput current.1channels are available.Controller ic is possible to achieve a frequency of 30Hz. TC642BEUA Features Applications : Fan Controller base on TC642 number TC642BEUA Applications There are a lot of Microchip Technology TC642BEUA motor drivers applications. Lighting for the ambience of tunability Tail lights Handheld devices Turn signals Horticultural applications Smart lighting applications Step-up or step-down driver topologies Street lights Mobile phone display backlight and key light driving Home lighting systems	PDF	999 In-stock	Get Quote
761-L6226PD	STMicroelectronics	L6226PD Overview The package contains [0].A 36-BSSOP (0.433, 11.00mm Width) Exposed Padcase is included with the part.Ideally, the part should be mounted by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.Drivers controllers is capable of supplying 8V~52V volts.This device operates at a temperature of -25°C~125°C TJ.A Brushed DCmotor can be classified as a type of motor.This part offers 36terminations.Voltage can be applied at a rate of 8V~52V volts to the load.You should run this amplifier at 48V.Its recommended mounting way is Surface Mount.Maintain a 4Aoutput current for the part.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.According to the L6226part number, the part is found.A device with 36pins is available.Drivers controllers belongs to Motion Control Electronics series.Drivers controllers operates from a voltage of 48V volts.At [0], the output voltage is maintained.In this case, the output voltage is maintained at STSPIN L62.Drivers controllers is possible to recognize Brushedas the type of motor.Its maximum output current reaches 2.8Ato meet the operational requirements.There are 4 channels on this device. L6226PD Features Applications : General Purpose Load voltage across the chip 8V~52V base on L6226 number Motor Type classified as Brushed L6226PD Applications There are a lot of STMicroelectronics L6226PD motor drivers applications. LED bias PWM generators Human-centric lighting PDAs Indicator Architectural lighting Telltale lights Automotive instrumentation Accurate LED current matching High power LED street light	PDF	999 In-stock	Get Quote
815-DRV8703DQRHBTQ1	Texas Instruments	DRV8703DQRHBTQ1 Overview There is a Tape & Reel (TR)package included in the design.32-VFQFN Exposed Padcases are included with the part.Ideally, the part should be mounted by Surface Mount, Wettable Flank.I believe it is suitable for the component connected to Brushed DC.5.5V~45V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of -40°C~150°C TJdegrees Celsius.Motors can be classified as Brushed DC.In this part, there are 32 terminations available.In order to get the best performance from this amplifier, it should be run at 13.5V.There is an analog integrated circuit BRUSH DC MOTOR CONTROLLERpresent in the device.DRV8703is the part number that finds it.32 pins are provided for its design.In this case, the output voltage is maintained at Automotive, AEC-Q100. DRV8703DQRHBTQ1 Features Applications : Brushed DC base on DRV8703 number DRV8703DQRHBTQ1 Applications There are a lot of Texas Instruments DRV8703DQRHBTQ1 motor drivers applications. Infotainment backlighting Outdoor area lights Smart lighting applications Mobile phone display backlight and key light driving Tail lights Human-centric lighting Hazardous application Street lights Matrix LED dimmers Turn signals	PDF	999 In-stock	Get Quote
536-TC646EOA	Microchip Technology	TC646EOA Overview The package is designed with [0].Drivers controllers comes in a 8-SOIC (0.154, 3.90mm Width) case.A mounting position of Surface Mountis recommended for the part.This component is suitable for the component connected to Fan Controller.In this case, the device can supply 3V~5.5V volts.With regard to operating temperature, it ranges -40°C~85°C TA. This motor type can be categorized as Brushless DC (BLDC).There are 8 terminations available in the part.You should run this amplifier at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.Based on the TC646part number, it is found.8pins are present on the device.The item belongs to the Motion Control Electronics series.In this case, 4.4Vis maintained as the output voltage.FanSense? is the main series of the part.This device offers a maximum degree of design flexibility due to its 5mAoutput current.A total of 1channels are available.A frequency of 30Hzcan be achieved. TC646EOA Features Applications : Fan Controller base on TC646 number TC646EOA Applications There are a lot of Microchip Technology TC646EOA motor drivers applications. Indicator Large format LED backlighting Large outdoor LED display High power LED street light Horticultural lighting High brightness LED lighting Street lights Camera-enabled smartphones Brake lights Hazardous application	PDF	999 In-stock	Get Quote
761-E-L6258EA	STMicroelectronics	E-L6258EA Overview The package contains [0].The part is packged with 36-BSSOP (0.433, 11.00mm Width) Exposed Pad case.Surface Mountshould be used for mounting the part.The component connected in General Purposematches it perfectly.4.75V~5.25V volts can be supplied by the device.This device operates at a temperature of 150°C TJ.This motor type can be categorized as Brushed DC.The part has 36terminations available.A voltage of 12V~40Vcan be applied to the load.I would like to remind you that this amplifier should be operated at 5V.Surface Mountis the recommended mounting method.The output current should remain at 1.5A.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.The L6258part number allows us to locate it.This device is designed with a pin count of 36.Drivers controllers is a part of the Motion Control Electronics series.The supply voltage for this driver is 34V.In order to meet operation requirements, its maximum output current reaches [0]. E-L6258EA Features Applications : General Purpose Load voltage across the chip 12V~40V base on L6258 number E-L6258EA Applications There are a lot of STMicroelectronics E-L6258EA motor drivers applications. Automotive exterior and interior lighting Commercial office LED bias Large outdoor LED display Indicator Industrial high-bay lights drivers for outdoor application Telltale lights CHMSL (center high-mount stop lamps) Tunnel lights	PDF	999 In-stock	Get Quote
536-TC649BEPA	Microchip Technology	TC649BEPA Overview The design includes a package of type [0].8-DIP (0.300, 7.62mm)cases are included with the part.To mount the part by [0], it is recommended that you do so.Fits the component connected to Fan Controller.Drivers controllers is capable of supplying 3V~5.5V volts.With regard to operating temperature, it ranges -40°C~85°C TA. There is a motor type Brushless DC (BLDC)available.This part provides 8terminations.Drivers controllers is recommended that this amplifier be run at 5V.The recommended mounting method is Through Hole.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.Based on the TC649part number, it is found.This device is designed with a pin count of 8.In the Motion Control Electronicsseries, it is included.Continually maintains the output voltage at 4.4V.Keeps the output voltage at FanSense?at all times.With a 5mA output current, it offers the greatest degree of design flexibility.The device has a total of 1channels.In this case, 30Hzis the maximum frequency that can be achieved. TC649BEPA Features Applications : Fan Controller base on TC649 number TC649BEPA Applications There are a lot of Microchip Technology TC649BEPA motor drivers applications. Horticultural lighting parking lights Smart lighting applications Dash CHMSL (center high-mount stop lamps) Indicator High power LED street light LCD displays PWM generators Commercial office	PDF	999 In-stock	Get Quote
815-DRV8876PWPT	Texas Instruments	DRV8876PWPT Overview Drivers controllers is designed with Tape & Reel (TR) package.A 16-PowerTSSOP (0.173, 4.40mm Width)case is included with the part.Drivers controllers is recommended that the part be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in DC Motors, General Purpose, Stepper Motors.0V~5.5V volts can be supplied by the device.A range of -40°C~125°C TAis available for operating temperature.A Brushed DCmotor can be classified as a type of motor.This part provides 16terminations.Drivers controllers is possible to apply voltage at a rate of 4.5V~37Vto the load.You should run this amplifier at 24V.Maintain a current of 3.5Afor the part output.An analog IC with the model number BRUSH DC MOTOR CONTROLLERis employed in the device.According to the DRV8876part number, the part is found. DRV8876PWPT Features Applications : DC Motors, General Purpose, Stepper Motors Load voltage across the chip 4.5V~37V base on DRV8876 number DRV8876PWPT Applications There are a lot of Texas Instruments DRV8876PWPT motor drivers applications. Charge pump circuits Camcorders Automotive instrumentation High power LED street light parking lights Alternative to HID lights Brake lights CHMSL (center high-mount stop lamps) Landscape lighting Daytime running lights (DRLs)	PDF	999 In-stock	Get Quote
815-DRV8814PWP	Texas Instruments	DRV8814PWP Overview Drivers controllers is designed wDrivers controllersh a package of [0].A 28-PowerTSSOP (0.173, 4.40mm Width)case is included with the part.In general, it is recommended that the part be mounted by Surface Mount.The component connected in General Purposeis compatible with it.There is a capability for the device to provide 8V~45V volts.There is a temperature range of -40°C~150°C TJin which this device operates.In this case, the motor type is Brushed DC.This part offers 28terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.I would like to remind you that this amplifier should be operated at 24V.A Surface Mountmounting method is recommended for this product.Drivers controllers is recommended to keep the part output current at 1.75A.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.Using the DRV8814part number, it is located.28pins are present on the device.Drivers controllers belongs to the series [0].2outputs are available in total.Drivers controllers is maintained at 3.3V volts.Brushedrepresents the motor type. DRV8814PWP Features Applications : General Purpose Load voltage across the chip 8V~45V base on DRV8814 number designed with 2 outputs Motor Type classified as Brushed DRV8814PWP Applications There are a lot of Texas Instruments DRV8814PWP motor drivers applications. Automotive applications Footwell lighting Industrial lighting PDAs Matrix LED dimmers Monitoring the energy that the luminaire uses Human-centric lighting Tunnel lights Large outdoor LED display Horticultural lighting	PDF	999 In-stock	Get Quote
536-TC649EUA	Microchip Technology	TC649EUA Overview The design contains a Tubepackage.A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)case is included with the part.Ideally, the part should be mounted by Surface Mount.Fits the component connected to Fan Controller.The device is capable of supplying a voltage of 3V~5.5V volts.In terms of operating temperature, it falls within the range -40°C~85°C TA.Motors can be classified as Brushless DC (BLDC).The part has 8terminations available.The amplifier should be set to 5V.The recommended mounting method is Surface Mount.There is an analog integrated circuit BRUSHLESS DC MOTOR CONTROLLERpresent in the device.Using the TC649part number, it is located.Drivers controllers is designed wDrivers controllersh 8 pins.This is part of the Motion Control Electronics series.In this case, 4.4Vis maintained as the output voltage.In this case, FanSense?is maintained as the output voltage.With a 5mA output current, it offers the greatest degree of design flexibility.1channels are available.Controller ic is possible to achieve a frequency of 30Hz. TC649EUA Features Applications : Fan Controller base on TC649 number TC649EUA Applications There are a lot of Microchip Technology TC649EUA motor drivers applications. Home lighting systems Running preventive- maintenance diagnostics drivers for outdoor application Lighting for the ambience of tunability Alternative to HID lights Telltale lights Multiple output capability PDAs LCD displays Hospitality buildings	PDF	999 In-stock	Get Quote
536-TC647EUA	Microchip Technology	TC647EUA Overview The design includes a package of type [0].Drivers controllers comes in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case.Drivers controllers is recommended that the part be mounted by Surface Mount.For the component connected to [0], it is suitable.Drivers controllers is capable of supplying 3V~5.5V volts.Operation temperature ranges from -40°C~85°C TA.In this case, the motor type is Brushless DC (BLDC).The part has 8terminations available.You should run this amplifier at 5V.Surface Mountis its recommended mounting method.This device utilizes the BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit.According to the TC647part number, the part is found.8pins are present on the device.Drivers controllers belongs to the Motion Control Electronics series.The output voltage is maintained at 4.4V.In this case, the output voltage is maintained at FanSense?.The motor type can be recognized as Brushless DC (BLDC).Featuring a 5mAoutput current, this device provides maximum design flexibility.There are 1 channels on this device.This frequency can be achieved at 30Hz. TC647EUA Features Applications : Fan Controller base on TC647 number Motor Type classified as Brushless DC (BLDC) TC647EUA Applications There are a lot of Microchip Technology TC647EUA motor drivers applications. Indicator circuit Multiple output capability Handheld devices Industrial high-bay lights Turn signals Daytime running lights (DRLs) Lighting for health and wellbeing Arena lighting Digital still cameras Charge pump circuits	PDF	999 In-stock	Get Quote
536-TC642VUA	Microchip Technology	TC642VUA Overview There is a Tubepackage included in the design.Drivers controllers is packaged wDrivers controllersh a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case.Drivers controllers is recommended that the part be mounted by Surface Mount.In this case, it is appropriate for the component connected to Fan Controller.There is a capability for the device to provide 3V~5.5V volts.There is a temperature range of 0°C~85°C TAin which this device operates.There is a motor type Brushless DC (BLDC)available.In this part, there are 8 terminations available.I would like to remind you that this amplifier should be operated at 5V.The recommended mounting method is Surface Mount.In this device, the analog IC BRUSHLESS DC MOTOR CONTROLLERis employed.This can be determined by looking at the TC642 part number.8pins are available on the device.The Motion Control Electronicsseries contains it.1outputs are available in total.In this case, the output voltage is kept at FanSense? volts.Drivers controllers offers maximum design flexibilDrivers controllersy wDrivers controllersh a 5mAoutput current. TC642VUA Features Applications : Fan Controller base on TC642 number designed with 1 outputs TC642VUA Applications There are a lot of Microchip Technology TC642VUA motor drivers applications. Dome High brightness LED lighting Indicator circuit Accurate LED current matching Emergency lighting Turn signals Outdoor area lights Camcorders Digital still cameras RGB and monochromatic LED drivers for signage and traffic signals	PDF	999 In-stock	Get Quote