 |
|
Ultralife |
TPS5110PW Description
It is packaged in 24-TSSOP (0.173, 4.40mm Width) for voltage regulators' voltage regulators' transportation.We have Tube packages ready for shipping.There are total of 2 outputs that are supported by voltage regulator.To ensure that the system does not malfunction, the operating temperature should be set to -40°C~85°C.Using search TPS5110 will help you find more pin-to-pin solutions.In the switching regulator, you can find 24 terminals that are connected to the board.The pinout of the switching regulator starts from 24 pins it has.When proceeding relow solder, temperature is allowed to peak 260.It has 24-shaped pins.It can be used for a variety of applications since it has an output voltage of 3.5V.For this regulator, input voltage must be multiplied by 4.5V.There is a maximum voltage that this voltage regulator can use, 28V.The DC DC Switching Regulator should be displaying 1.2A as its current output.During quiescent mode, the regulator controller displays a quiescent current of 900μA.It is designed to produce as much current 15A as possible at its maximum capacity.There is a minimum voltage that can be outputted by this controller output, which is 900mV.The maximum voltage that can be output by this voltage regulator is 3.5V voltage.
TPS5110PW Features
2 outputs
Operating Temperature: -40°C~85°C
Peak Reflow Temperature: 260
Quiescent Current: 900μA
TPS5110PW Applications
There are a lot of Texas Instruments TPS5110PW Linear Regulator Controllers applications.
Desknotes and Notebooks High Efficiency Linear Regulators Low-Voltage DSP Power Supplies Ultrahigh current ultralow dropout voltage regulator TVs Low noise SMPS post regulator Battery Operating Equipment Monitors Error Amplifiers Graphic Cards
|
|
6421
In-stock
|
Get Quote
|
 |
|
Ultralife |
LP873300RHDTQ1 Description
The LP873300RHDTQ1 is designed to meet the power management requirements in automotive applications. The LP873300RHDTQ1 has two step-down DC/DC converters (which can be configured as a single dual-phase regulator or two single-phase regulators), two linear regulators， and two general-purpose digital-output signals. The LP873300RHDTQ1 is controlled by an l2C-compatible serial interface and by an enable signal. The LP873300RHDTQ1 supports programmable start-up and shutdown delays and sequences including GPO signals synchronized to the enable signal.
LP873300RHDTQ1 Features
Input voltage: 2.8 V to 5.5 V Configurable general-purpose output signals(GPO, GPO2) Interrupt function with programmable masking Programmable power-good signal (PGOOD) Output short-circuit and overload protection Overtemperature warning and protection Overvoltage protection (OVP) and under voltage lockout (UVLO) 28-pin, 5-mm × 5-mm VQFN package with wettable flanks
LP873300RHDTQ1 Applications
Automotive head unit and cluster Automotive camera module Surround-view system ECU Radar system ECU
|
|
293
In-stock
|
Get Quote
|
|
|
Ultralife |
LP87322FRHDRQ1 Overview
LP87322FRHDRQ1 voltage regulator has advantages from low-noise, low-dropout, and a miniaturized design. The low dropout voltage as well as low quiescent current permit operation at very minimal power consumption. LP87322FRHDRQ1 regulator is perfect to power noise-sensitive components, for instance, video, medical, or test and measurement application.
As a result, the harley voltage regulator is packaged in a 28-VFQFN Exposed Pad shape for easy voltage regulators' transportation.We have Tape & Reel (TR) packages ready for shipping.Voltage regulator supports 4 outputs in total.To prevent malfunctions, the operating temperature should be set to -40°C~125°C TA.To find more pin-to-pin solutions for your specific needs, you can try searching for LP87322.In the switching regulator, you can find 28 terminals that are connected to the board.Relow soldering is only allowed to proceed after the temperature has reached peak 260 during the process.A 28 pattern is used for this voltage regulator's pin arrangement.With the 3.7V voltage supplied by this voltage regulator 12v, the voltage regulator 12v is able to perform a wide range of demanding tasks.The DC DC Switching Regulator needs at least 2.8V to run.It is not recommended that you feed the voltage regulator DC to DC with voltages higher than 5.5V if you want it to work properly.The output quality is maintained by the cooperation of the 4 channels of the voltage regulator.As voltage regulator 12v of this voltage regulator 12v, a voltage regulator 12v from the Automotive, AEC-Q100 series is used.
LP87322FRHDRQ1 Features
4 outputs
Operating Temperature: -40°C~125°C TA
Peak Reflow Temperature: 260
Supply voltage range: 3.7V
LP87322FRHDRQ1 Applications
There are a lot of Texas Instruments LP87322FRHDRQ1 Linear Regulator Controllers applications.
Desknotes and Notebooks Ultrahigh current ultralow dropout voltage regulator Monitors Telecom Equipment TVs Printer and other Peripheral Equipment Consumer Electronics Microcontroller Power Supplies Voltage References VCRs
|
|
3000
In-stock
|
Get Quote
|
 |
|
Ultralife |
TPS54122RHLR Overview
Transport is made easier with the 24-VFQFN Exposed Pad package.Shipped in a Tape & Reel (TR) package.There are a total of 2 outputs supported by the voltage regulator.If you want to avoid malfunctions, set the operating temperature to -40°C~125°C.To find pin-to-pin solutions tailored to your requirements, try searching TPS54122.switching regulator 24 terminals can be found here.Prior to proceeding with relow solder, the temperature of the solder must peak 260.Pins are arranged in a 24 pattern in this voltage regulator.In addition to its 3.6V output voltage, it can be used for a wide range of applications.To operate this regulator, you must supply voltage ≥ 2.95V.It is possible for this voltage regulator to use a maximum voltage of 5.5V.The DC DC Switching Regulator should produce an output of 3A at the moment.A quiescent current of 360μA is displayed by the regulator controller.Maximum current 3A will be produced by it.The voltage regulator DC to DC, as well as other Switching Regulator or Controllers products, play an important role in the industry as a whole.Both the IC and ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.6V, ALSO OPERATES AS LDO REGULATOR specialiALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.6V, ALSO OPERATES AS LDO REGULATORe in a number of different fields.A Surface Mount-slot is provided for mounting the board on a PCB or other board that requires mounting.
TPS54122RHLR Features
2 outputs
Operating Temperature: -40°C~125°C
Peak Reflow Temperature: 260
Quiescent Current: 360μA
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.6V, ALSO OPERATES AS LDO REGULATOR
TPS54122RHLR Applications
There are a lot of Texas Instruments TPS54122RHLR Linear Regulator Controllers applications.
Ultrahigh current ultralow dropout voltage regulator Low parts count 5.0V to 3.3V computer supply Graphics Card Microprocessor Power Supply Personal Computers High Efficiency Linear Regulators Low-dropout SMPS post regulator Dual/Triple Power Supplies TVs Post Regulation for Switching Supplies
|
|
643
In-stock
|
Get Quote
|
 |
|
Ultralife |
TPS54120RGYR Description
The TPS54120RGYR creates an ultra-low-noise power supply that offers quiet power rails to noise-sensitive applications by fusing a step-down switching (dc-dc) converter with a high power supply rejection (PSR), low-noise, low-dropout regulator (LDO). The TPS54120RGYR is perfectly suited for systems with 12-V power buses since it has a wide input range of 4.5 V to 17 V and offers a 1-A continuous output current. Using external resistors, the output voltage can be adjusted from 0.8 V to 6.0 V. Due to the TPS54120RGYR's fully programmable dc-dc converter and LDO, it can be employed in a variety of low-noise applications. The TPS54120RGYR also has features including a power-good signal, switching frequency synchronization, and soft start.
TPS54120RGYR Features
High efficiency:72% at 1A, 12V input Excellent load/line transient response Small package:3.5mm×5.5mm QFN-24 Low noise output: 17μsVRMS at 100 Hz to 1 MHz Synchronizable to external clock:200kHz to 1.2 MHz
TPS54120RGYR Applications
Professional audio Telecom infrastructure Test and measurement Powering RF components:VCOs, receivers, ADCs Powering sensitive clocking distribution circuits
|
|
14968
In-stock
|
Get Quote
|
 |
|
Texas Instruments |
TPS5130QPTRQ1 Description
The TPS5130QPTRQ1 is composed of three independent synchronous buck regulator controllers (SBRC) and one low dropout (LDO) regulator controller.
TPS5130QPTRQ1 Features
- Switcher: 4.5 V to 28 V - LDO: 1.1 V to3.6 V - Switcher: 0.9 V to 8.5 V - LDO: 0.9 V to 2.5 V Synchronous for High Efficiency Precision Vretf (土1 .5%) PWM Mode Control: 500-kHz Operation (Max) Auto PWM/SKIP Mode Available High-Speed Error Amplifier Overcurrent Protection With Temperature Compensation Circuit for Each Channel Overvoltage and Undervoltage Protection Programmable Short-Circuit Protection Power Good Output (PGOUT) With Programmable Delay Time 5-V and 3.3-V Linear Regulators
TPS5130QPTRQ1 Applications
Notebook PCs, PDAs Consumer Game Systems DSP Applications
|
|
1000
In-stock
|
Get Quote
|
 |
|
Texas Instruments |
TPS43331QDAPRQ1 Overview
The harley voltage regulator is packaged in 38-PowerTSSOP (0.240, 6.10mm Width) to make voltage regulators' transportation as easy as possible.Embark on a journey with package Tape & Reel (TR).As a whole, voltage regulator supports 4 outputs.For optimal performance, the operating temperature should be set to -40°C~125°C.Try search "TPS43331" to get more pin-to-pin solutions for your special needs.A switching regulator such as this can be identified by its 38 terminals.Starting with 38 pins, the pinouts of the switching regulator begin.During relow soldering, temperature should peak 260.In this voltage regulator, the pins are arranged in a 38 pattern.A 10V-volt output voltage makes it suitable for a wide range of applications.A voltage of 5V is required for this regulator.There is a maximum voltage that this voltage regulator can use, 40V.The DC DC Switching Regulator's current output should be 4A.There is a quiescent current of 65μA displayed by the regulator controller.Mounting it on a PCB or other board is easy with the Surface Mount.There is a voltage regulator 12v in this voltage regulator 12v that is taken from Automotive, AEC-Q100.
TPS43331QDAPRQ1 Features
4 outputs
Operating Temperature: -40°C~125°C
Peak Reflow Temperature: 260
Quiescent Current: 65μA
TPS43331QDAPRQ1 Applications
There are a lot of Texas Instruments TPS43331QDAPRQ1 Linear Regulator Controllers applications.
Post Regulation for Switching Supplies Low-Voltage DSP Power Supplies Voltage Regulators VCRs Graphic Cards Single Supply Amplifier Battery Operating Equipment Low noise SMPS post regulator Graphics Card Adjustable Supplies
|
|
3881
In-stock
|
Get Quote
|
 |
|
Infineon Technologies |
IRU3048CSTR OverviewAs a result, the harley voltage regulator is packaged in a 16-SOIC (0.154, 3.90mm Width) shape for easy voltage regulators' transportation.The package Tape & Reel (TR) is ready to be shipped out.In total, voltage regulator supports 3 outputs on the same platform.To avoid malfunctioning of the voltage regulator, the operating temperature should be set to 0°C~70°C.To find more pin-to-pin solutions that meet your requirements, search IRU3048CS.Organizing the pins in this voltage regulator in a 16 pattern is the key to its functionality.There is a quiescent current of 3.5mA displayed on the regulator controller.This harley voltage regulator is part of the 16-SOIC package.Lower temperatures than 0°C don't suit it.It is not recommended that you use the harley voltage regulator at temperatures above 70°C. IRU3048CSTR Features3 outputs Operating Temperature: 0°C~70°C Quiescent Current: 3.5mA IRU3048CSTR ApplicationsThere are a lot of Infineon Technologies IRU3048CSTR Linear Regulator Controllers applications. - Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
- Battery Operating Equipment
- Adjustable Supplies
- Switching Power Supplies
|
|
44412
In-stock
|
Get Quote
|
 |
|
Texas Instruments |
TPS610986DSET Description
There is a 6-WFDFN package for easy voltage regulators' transportation of the harley voltage regulator. The shipment of package Tape & Reel (TR) has been completed. There are a total of 2 outputs that are supported by the voltage regulator. In order to prevent malfunctions, it is recommended that the operating temperature be set to -40°C~85°C TA. You can get more pin-to-pin solutions by searching TPS610986.In the switching regulator, you can find 6 terminals that are connected to the board. In this voltage regulator, the pins are arranged in a 6 pattern. This regulator voltage can be used in a wide range of applications due to its 3.3V output voltage. It requires an input voltage ≥ 700mV. It is possible to use 4.5V voltage with this voltage regulator. It has a Fixed output type regulator controller. The DC-DC Switching Regulator should produce an output of 350mA at the moment. An idle current of 300nA is displayed by the regulator controller. It has a Surface Mount for mounting on PCB or other boards. It can output a voltage of 3.3V at its lowest setting.3.3V voltage is the maximum output of this voltage regulator.
TPS610986DSET Features
2 outputs
Operating Temperature: -40°C~85°C TA
Quiescent Current: 300nA
TPS610986DSET Applications
There are a lot of Texas Instruments TPS610986DSET Linear Regulator Controllers applications.
Battery Operating Equipment LCD Monitor High-Efficiency Linear Regulators Voltage Regulators Adjustable Supplies Low-Voltage DSP Power Supplies Monitors Constant high-current source Dual/Triple Power Supplies Ultrahigh current ultralow dropout voltage regulator
|
|
15341
In-stock
|
Get Quote
|
 |
|
Texas Instruments |
TPS65235-1RUKT OverviewThere is a 20-WFQFN Exposed Pad package for easy voltage regulators' transportation of the harley voltage regulator.The shipping of package Tape & Reel (TR) has been completed.As a result, 2 outputs can be supported as a whole.There is a need to set the operating temperature to -40°C~85°C in order to avoid malfunctions.You can get more pin-to-pin solutions by searching TPS65235.There are 20 terminals on the switching regulator that you can find.There are 20 pins on this voltage regulator.The voltage regulator 12v can fulfill a wide range of tasks due to the fact that it is supplied by 12V voltage.The DC DC Switching Regulator will need at least 4.5V in order to start up.Maintaining output quality requires cooperation between the 1 channels of the voltage regulator. TPS65235-1RUKT Features2 outputs Operating Temperature: -40°C~85°C Supply voltage range: 12V TPS65235-1RUKT ApplicationsThere are a lot of Texas Instruments TPS65235-1RUKT Linear Regulator Controllers applications. - Dual/Triple Power Supplies
- Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
- Battery Operating Equipment
- Adjustable Supplies
|
|
67410
In-stock
|
Get Quote
|
|
|
Texas Instruments |
TPS610982DSER Description
The TPS610982DSER is an ultra-low power solution for products powered by either a one-cell or two-cell alkaline, NiCd or NiMH, one-cell coin cell, or one-cell Li-Ion or Li-polymer battery. It integrates a Lowdropout Linear Regulator (LDO) or a load switch with a boost converter and provides two output rails. The boost output V(MAIN) is designed as an always-on supply for a central system, and the LDO or load switch output V(SUB) is to power peripheral devices.
TPS610982DSER Features
300-nA ultra-low LQ in low-power mode Start-up into the load at 0.7-V input voltage Operating input voltage from0.7V to 4.5 V Selectable output voltages up to 4.3 V Minimum 350-mA switch peak current limit Integrated LDO/load switch
TPS610982DSER Applications
Smart remote control BLE tag Wearable applications Low-power wireless applications Portable consumer or medical products Single-coin cell, single- or two-cell alkaline-powered applications
|
|
58152
In-stock
|
Get Quote
|
 |
|
STMicroelectronics |
L5963Q-V0Y OverviewFor voltage regulators' voltage regulators' transportation, it is packaged in a 48-TFQFN Exposed Pad shape.We have Tray packages ready for shipping.As a result, voltage regulator supports a total of 3 outputs.If you want to avoid malfunctions, set the operating temperature to -40°C~105°C.To find pin-to-pin solutions tailored to your requirements, try searching L5963. L5963Q-V0Y Features3 outputs Operating Temperature: -40°C~105°C L5963Q-V0Y ApplicationsThere are a lot of STMicroelectronics L5963Q-V0Y Linear Regulator Controllers applications. - Low noise SMPS post regulator
- Low-dropout SMPS post regulator
- High-current, current-limited switch
- Dual/Triple Power Supplies
- Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
|
|
13741
In-stock
|
Get Quote
|
 |
|
Microchip Technology |
MIC2225-4KYMT-TR OverviewThe harley voltage regulator is packaged in 10-UFDFN, 10-TMLF® to make voltage regulators' transportation as easy as possible.We are ready to ship package Tape & Reel (TR) to you.Voltage regulator supports a total of 2 outputs.Keeping the operating temperature at -40°C~125°C will prevent any malfunctions from occurring during the operation.For more pin-to-pin solutions for your special needs, you might want to try searching for MIC2225.A 10-pattern is present in this voltage regulator.There is a design that makes it possible to produce a maximum amount of current 600mA.This harley voltage regulator is supplied as part of the 10-TMLF® (2x2) package.The board has a Surface Mount-slot for mounting on PCBs or other types of boards.It will not work at temperatures lower than -40°C.Temperatures higher than 125°C are not recommended. MIC2225-4KYMT-TR Features2 outputs Operating Temperature: -40°C~125°C MIC2225-4KYMT-TR ApplicationsThere are a lot of Microchip Technology MIC2225-4KYMT-TR Linear Regulator Controllers applications. - Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
- Battery Operating Equipment
- Adjustable Supplies
- Switching Power Supplies
- Error Amplifiers
|
|
2855
In-stock
|
Get Quote
|
 |
|
Texas Instruments |
LM3686TLE-AADW/NOPB Overview
LM3686TLE-AADW/NOPB voltage regulator has advantages from low-noise, low-dropout, and a miniaturized design. The low dropout voltage as well as low quiescent current permit operation at very minimal power consumption. LM3686TLE-AADW/NOPB regulator is perfect to power noise-sensitive components, for instance, video, medical, or test and measurement application.
For ease of voltage regulators' transportation, it is packaged in 12-WFBGA boxes.The shipment of package Tape & Reel (TR) has been completed.The total number of outputs voltage regulator supports is 3.Keeping the operating temperature at -40°C~85°C will prevent any malfunctions from occurring during the operation.Find more pin-to-pin solutions for your special needs by searching LM3686.switching regulator 12 terminals can be found here.In this switching regulator, pinouts start at pin 12.The temperature must reach a peak of 260 before the relow soldering procedure can begin.A 12-pattern is present in this voltage regulator.This regulator voltage can be used in a wide range of applications due to its 2.8V output voltage.A voltage of 2.7V is required for this regulator.voltage regulators of this type can use voltages up to 5.5V.Regulator controllers of this type have Adjustable, Fixed outputs.There should be a 900mA output from the DC DC Switching Regulator at the moment.The regulator controller displays a quiescent current value of 70μA for the regulator.In addition to the voltage regulator DC to DC, other Switching Regulator or Controllers's play a significant role in the industry as well.Suitable for mounting on PCBs and other boards, it has a Surface Mount.
LM3686TLE-AADW/NOPB Features
3 outputs
Operating Temperature: -40°C~85°C
Peak Reflow Temperature: 260
Quiescent Current: 70μA
LM3686TLE-AADW/NOPB Applications
There are a lot of Texas Instruments LM3686TLE-AADW/NOPB Linear Regulator Controllers applications.
Post Regulation for Switching Supplies Battery Operating Equipment Low-dropout SMPS post regulator PC Motherboard Voltage References Consumer Electronics Telecom Equipment Switching Power Supplies Low noise SMPS post regulator Adjustable Supplies
|
|
9421
In-stock
|
Get Quote
|
 |
|
Microchip Technology |
TC1313-ZA0EUNTR OverviewTransport is made easier with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The Tape & Reel (TR) package is ready for shipping.The total number of outputs voltage regulator supports is 2.To avoid malfunctioning, set the operating temperature to -40°C~85°C.You can find more pin-to-pin solutions by searching TC1313.A switching regulator's 10 terminals can be found there.Its pinout begins with 10 pins.The temperature is allowed to peak 260 when relow soldering.In this voltage regulator, the pins are arranged in a 10 pattern.It can be used for a variety of applications since it has an output voltage of 800mV.500mA should be the current output from the DC DC Switching Regulator.The voltage regulator DC to DC, as well as other Power Management Circuits, play a key role in the industry.IC and PFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5 specialiPFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5e in certain areas.Mounting on PCBs or other boards is possible with the Surface Mount on the board. TC1313-ZA0EUNTR Features2 outputs Operating Temperature: -40°C~85°C Peak Reflow Temperature: 260 PFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5 TC1313-ZA0EUNTR ApplicationsThere are a lot of Microchip Technology TC1313-ZA0EUNTR Linear Regulator Controllers applications. - Constant high-current source
- Low parts count 5.0V to 3.3V computer supply
- Low noise SMPS post regulator
- Low-dropout SMPS post regulator
- High-current, current-limited switch
- Dual/Triple Power Supplies
- Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
|
|
13425
In-stock
|
Get Quote
|
|
|
Microchip Technology |
TC1304-ZS0EUNTR OverviewThere is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package for easy voltage regulators' transportation of the harley voltage regulator.The shipping of package Tape & Reel (TR) has been completed.As a result, 2 outputs can be supported as a whole.There is a need to set the operating temperature to -40°C~85°C in order to avoid malfunctions.You can get more pin-to-pin solutions by searching TC1304.There are 10 terminals on the switching regulator that you can find.The switching regulator's pinout starts with pin 10.Prior to proceeding with relow solder, the temperature of the solder must peak 260.There are 10 pins on this voltage regulator.There should be a 500mA output from the DC DC Switching Regulator at the moment.The voltage regulator DC to DC, as well as other Power Management Circuits products, play an important role in the industry as a whole.IC and AUTOMATIC PWM TO PFM MODE specialiAUTOMATIC PWM TO PFM MODEe in specific fields.The mount has a Surface Mount that can be mounted on PCBs or other boards. TC1304-ZS0EUNTR Features2 outputs Operating Temperature: -40°C~85°C Peak Reflow Temperature: 260 AUTOMATIC PWM TO PFM MODE TC1304-ZS0EUNTR ApplicationsThere are a lot of Microchip Technology TC1304-ZS0EUNTR Linear Regulator Controllers applications. - Dual/Triple Power Supplies
- Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
- Battery Operating Equipment
- Adjustable Supplies
|
|
15704
In-stock
|
Get Quote
|
|
|
Microchip Technology |
See Relate Datesheet |
|
999
In-stock
|
Get Quote
|
|
|
Microchip Technology |
TC1313-ZS0EUNTR OverviewTransport is made easier with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The Tape & Reel (TR) package is ready for shipping.The total number of outputs voltage regulator supports is 2.To avoid malfunctioning, set the operating temperature to -40°C~85°C.You can find more pin-to-pin solutions by searching TC1313.A switching regulator's 10 terminals can be found there.Its pinout begins with 10 pins.The temperature is allowed to peak 260 when relow soldering.In this voltage regulator, the pins are arranged in a 10 pattern.It can be used for a variety of applications since it has an output voltage of 800mV.500mA should be the current output from the DC DC Switching Regulator.The voltage regulator DC to DC, as well as other Power Management Circuits, play a key role in the industry.IC and PFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5 specialiPFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5e in certain areas.Mounting on PCBs or other boards is possible with the Surface Mount on the board. TC1313-ZS0EUNTR Features2 outputs Operating Temperature: -40°C~85°C Peak Reflow Temperature: 260 PFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5 TC1313-ZS0EUNTR ApplicationsThere are a lot of Microchip Technology TC1313-ZS0EUNTR Linear Regulator Controllers applications. - Constant high-current source
- Low parts count 5.0V to 3.3V computer supply
- Low noise SMPS post regulator
- Low-dropout SMPS post regulator
- High-current, current-limited switch
- Dual/Triple Power Supplies
- Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
|
|
1606
In-stock
|
Get Quote
|
|
|
Microchip Technology |
See Relate Datesheet |
|
999
In-stock
|
Get Quote
|
|
|
Microchip Technology |
TC1313-ZA0EUN Overview10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging is voltage regulators' for voltage regulators' transportation.The shipment of package Tube has been completed.There are total of 2 outputs that are supported by voltage regulator.To prevent malfunctions, the operating temperature should be set to -40°C~85°C.Using search TC1313 will help you find more pin-to-pin solutions.In this switching regulator, you'll find 10 terminals.10 pins are the first pins on the switching regulator's pinout.Relow soldering is done by allowing the temperature to peak at 260 during the procedure.A 10 pattern is used for this voltage regulator's pin arrangement.It can be used in many different applications due to its output voltage of 800mV.The DC DC Switching Regulator should output 500mA at the moment.In the industry, Power Management Circuitss like the voltage regulator DC to DC play an important role.As with PFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5, ICs specialiPFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5e in certain areas.A Surface Mount allows mounting on PCBs or other boards. TC1313-ZA0EUN Features2 outputs Operating Temperature: -40°C~85°C Peak Reflow Temperature: 260 PFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5 TC1313-ZA0EUN ApplicationsThere are a lot of Microchip Technology TC1313-ZA0EUN Linear Regulator Controllers applications. - Low-dropout SMPS post regulator
- High-current, current-limited switch
- Dual/Triple Power Supplies
- Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
|
|
4372
In-stock
|
Get Quote
|
 |
|
Microchip Technology |
See Relate Datesheet |
|
999
In-stock
|
Get Quote
|
|
|
Microchip Technology |
See Relate Datesheet |
|
999
In-stock
|
Get Quote
|
|
|
Microchip Technology |
MIC2225-GFYMT-TR OverviewIn order to facilitate voltage regulators' transportation, the harley voltage regulator is packaged in 10-UFDFN, 10-TMLF® shape.There is a package Tape & Reel (TR) ready for shipping.There are a total of 2 outputs supported by the voltage regulator.To ensure that the system does not malfunction, the operating temperature should be set to -40°C~125°C.To find more pin-to-pin solutions for your specific needs, you can try searching for MIC2225.10-pattern pins are used in this voltage regulator.It is designed to produce as much current 600mA as possible at its maximum capacity.This harley voltage regulator is provided with the 10-TMLF® (2x2) package.A Surface Mount-slot is provided for mounting the board on a PCB or other board that requires mounting.It will not work at temperatures lower than -40°C.Use should not be recommended at temperatures higher than 125°C. MIC2225-GFYMT-TR Features2 outputs Operating Temperature: -40°C~125°C MIC2225-GFYMT-TR ApplicationsThere are a lot of Microchip Technology MIC2225-GFYMT-TR Linear Regulator Controllers applications. - Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
- Battery Operating Equipment
- Adjustable Supplies
- Switching Power Supplies
- Error Amplifiers
- Single Supply Amplifier
|
|
5454
In-stock
|
Get Quote
|
|
|
Microchip Technology |
See Relate Datesheet |
|
999
In-stock
|
Get Quote
|
|
|
Microchip Technology |
See Relate Datesheet |
|
999
In-stock
|
Get Quote
|
|
|
Microchip Technology |
TC1313-1P0EMFTR OverviewThe harley voltage regulator is packaged in 10-VFDFN Exposed Pad to make voltage regulators' transportation as easy as possible.We are ready to ship package Tape & Reel (TR) to you.Voltage regulator supports a total of 2 outputs.Keeping the operating temperature at -40°C~85°C will prevent any malfunctions from occurring during the operation.For more pin-to-pin solutions for your special needs, you might want to try searching for TC1313.In the switching regulator, you can find 10 terminals that are connected to the board.There is one important thing to keep in mind when there is a pinout for a switching regulator and that is pin 10.In order to proceed with the relow soldering, it is necessary to allow the temperature to peak at 260-peak.A 10-pattern is present in this voltage regulator.In the current state of the DC DC Switching Regulator, 500mA should be its output.In addition to the voltage regulator DC to DC, other Power Management Circuits's play a significant role in the industry as well.As well as PFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5, the IC specialiPFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5es in certain areas that are important to the organiPFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5ation.The board has a Surface Mount-slot for mounting on PCBs or other types of boards. TC1313-1P0EMFTR Features2 outputs Operating Temperature: -40°C~85°C Peak Reflow Temperature: 260 PFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5 TC1313-1P0EMFTR ApplicationsThere are a lot of Microchip Technology TC1313-1P0EMFTR Linear Regulator Controllers applications. - Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
- Battery Operating Equipment
- Adjustable Supplies
- Switching Power Supplies
- Error Amplifiers
|
|
9893
In-stock
|
Get Quote
|
|
|
Microchip Technology |
TC1313-ZS0EMFTR OverviewIn order to facilitate voltage regulators' transportation, the harley voltage regulator is packaged in 10-VFDFN Exposed Pad shape.There is a package Tape & Reel (TR) ready for shipping.There are a total of 2 outputs supported by the voltage regulator.To ensure that the system does not malfunction, the operating temperature should be set to -40°C~85°C.To find more pin-to-pin solutions for your specific needs, you can try searching for TC1313.A switching regulator such as this can be identified by its 10 terminals.There is one important fact to note, which is that pin 10 of the switching regulator is at the beginning of its pinout.The temperature must reach a peak of 260 before the relow soldering procedure can begin.10-pattern pins are used in this voltage regulator.The DC DC Switching Regulator should produce an output of 500mA at the moment.It should be noted that other Power Management Circuits's, such as the voltage regulator DC to DC, play a vital role in this industry as well.Both the IC and PFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5 specialiPFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5e in a number of different fields.A Surface Mount-slot is provided for mounting the board on a PCB or other board that requires mounting. TC1313-ZS0EMFTR Features2 outputs Operating Temperature: -40°C~85°C Peak Reflow Temperature: 260 PFM CONTROL TECHNIQUE ALSO POSSIBLE; OUTPUT VOLTAGE IS ADJUSTABLE UPTO 0.8 TO 4.5 TC1313-ZS0EMFTR ApplicationsThere are a lot of Microchip Technology TC1313-ZS0EMFTR Linear Regulator Controllers applications. - Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
- Battery Operating Equipment
- Adjustable Supplies
- Switching Power Supplies
- Error Amplifiers
- Single Supply Amplifier
|
|
11242
In-stock
|
Get Quote
|
|
|
Microchip Technology |
TC1303A-ZA0EUNTR OverviewFor ease of voltage regulators' transportation, it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) boxes.Embark on a journey with package Tape & Reel (TR).Voltage regulator supports up to 2 outputs in total.In order to prevent malfunctions, it is recommended that the operating temperature be set to -40°C~85°C.Search TC1303A for more pin-to-pin solutions.switching regulator 10 terminals can be found here.The pinout of a switching regulator starts from pin 10.Temperature should peak at 260 during relow soldering.It has 10-shaped pins.There should be an output of 500mA from the DC DC Switching Regulator at this time.There are other Power Management Circuitss in the industry, such as the voltage regulator DC to DC, that play an important role.A specialiAUTOMATIC PWM TO PFM MODEation of the IC and AUTOMATIC PWM TO PFM MODE is evident.Suitable for mounting on PCBs and other boards, it has a Surface Mount. TC1303A-ZA0EUNTR Features2 outputs Operating Temperature: -40°C~85°C Peak Reflow Temperature: 260 AUTOMATIC PWM TO PFM MODE TC1303A-ZA0EUNTR ApplicationsThere are a lot of Microchip Technology TC1303A-ZA0EUNTR Linear Regulator Controllers applications. - High-current, current-limited switch
- Dual/Triple Power Supplies
- Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
- Battery Operating Equipment
|
|
11808
In-stock
|
Get Quote
|
|
|
Microchip Technology |
TC1303B-PA0EUNTR OverviewAs a result, the harley voltage regulator is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) shape for easy voltage regulators' transportation.The package Tape & Reel (TR) is ready to be shipped out.In total, voltage regulator supports 2 outputs on the same platform.To avoid malfunctioning of the voltage regulator, the operating temperature should be set to -40°C~85°C.To find more pin-to-pin solutions that meet your requirements, search TC1303B.The switching regulator has 10 terminals that can be found on the side of the switching regulator.In this switching regulator, pinouts start at pin 10.Relow soldering is only allowed to proceed after the temperature has reached peak 260 during the process.Organizing the pins in this voltage regulator in a 10 pattern is the key to its functionality.Currently, 500mA is the DC DC Switching Regulator's output.In the industry, there are other Power Management Circuitss, including the voltage regulator DC to DC, that play an important role.Both the IC and AUTOMATIC PWM TO PFM MODE specialiAUTOMATIC PWM TO PFM MODEe in certain areas.Mounting it on a PCB or other board is easy with the Surface Mount. TC1303B-PA0EUNTR Features2 outputs Operating Temperature: -40°C~85°C Peak Reflow Temperature: 260 AUTOMATIC PWM TO PFM MODE TC1303B-PA0EUNTR ApplicationsThere are a lot of Microchip Technology TC1303B-PA0EUNTR Linear Regulator Controllers applications. - Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
- Battery Operating Equipment
- Adjustable Supplies
- Switching Power Supplies
|
|
15188
In-stock
|
Get Quote
|
|
|
Microchip Technology |
TC1303A-PP3EUNTR OverviewIt is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) for voltage regulators' voltage regulators' transportation.Ready for shipping in Tape & Reel (TR) package.Voltage regulator supports 2 outputs in total.The operating temperature should be set to -40°C~85°C to avoid mal-function.Try search "TC1303A" to get more pin-to-pin solutions for your special needs.You can find 10 terminals of the voltage regulator 12v.The pinout of the switching regulator starts from 10 pins it has.When proceeding relow solder, temperature is allowed to peak 260.The voltage regulator has 10 pins.Current output from the DC DC Switching Regulator should be 500mA.Other Power Management Circuits like the voltage regulator DC to DC play a important role in the industry.The IC specialliAUTOMATIC PWM TO PFM MODEes itself in certain areas along with AUTOMATIC PWM TO PFM MODE.It has a Surface Mount for mouting on PCB or other boards. TC1303A-PP3EUNTR Features2 outputs Operating Temperature: -40°C~85°C Peak Reflow Temperature: 260 AUTOMATIC PWM TO PFM MODE TC1303A-PP3EUNTR ApplicationsThere are a lot of Microchip Technology TC1303A-PP3EUNTR Linear Regulator Controllers applications. - Ultrahigh current ultralow dropout voltage regulator
- Constant high-current source
- Low parts count 5.0V to 3.3V computer supply
- Low noise SMPS post regulator
- Low-dropout SMPS post regulator
- High-current, current-limited switch
- Dual/Triple Power Supplies
- Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
|
|
15803
In-stock
|
Get Quote
|
My Cart
