Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Honeywell Aerospace | Compass X, Y, Z Module |
3240
In-stock
|
Get Quote | |||
Honeywell Aerospace | ±2 Gauss Compass X, Y, Z 0.1° 36-LCC |
4787
In-stock
|
Get Quote | |||
Banner Engineering Corporation | Compass X, Y, Z Cylinder, Threaded - M12 |
3788
In-stock
|
Get Quote | |||
Honeywell Aerospace | ±0.9 Gauss Compass X, Y, Z 150µGauss, 0.15°, 0.2° 3-SMD Module |
4592
In-stock
|
Get Quote | |||
Honeywell Aerospace | ±2 Gauss Compass X, Y 100µGauss Module (No Case) |
7281
In-stock
|
Get Quote | |||
Honeywell Aerospace | ±2 Gauss Compass X, Y, Z 40µGauss 20-DIP Module |
4004
In-stock
|
Get Quote | |||
Honeywell Aerospace | ±2 Gauss Compass X, Y, Z 67µGauss Module with Case |
3985
In-stock
|
Get Quote | |||
Honeywell Aerospace | ±2 Gauss Compass X, Y, Z 67µGauss Module (No Case) |
2752
In-stock
|
Get Quote | |||
Honeywell Aerospace | ±1 Gauss, ±40° Compass X, Y, Z 1µGauss, 0.1° Module with Case |
8613
In-stock
|
Get Quote | |||
MDT | ±30 kGauss Compass X Probe |
9
In-stock
|
Get Quote | |||
Infineon Technologies | Compass |
4
In-stock
|
Get Quote | |||
Infineon Technologies | IR1150STRPBF OverviewAs far as packaging is concerned, it comes in a 8-SOIC (0.154, 3.90mm Width) package.The package is Tape & Reel (TR)-shaped.As far as the mounting type of the device is concerned, it is Surface Mount.The voltage supply of 15V~20V should be used to operate it.Device 0°C~70°C operates at 0°C~70°C.The gadget comes with several 8 terminals.Currently, the startup current is 175μA.Pin number 8 remains unchanged.The device's best part has a number of IR1150SPBF in it.In this case, 200kHz represents the switching frequency.It's like a subclass of Switching Regulator or Controllers.This device can continue to function accurately with a frequency of 50kHz.It is a part of mount Surface Mount.A 15V-volt supply is always used to power the component.Isup, or the maximum supply current, shall not exceed 40mA.A 1 output can take many forms, depending on the application.36mA is the device's supply current.6.8V can be used as an output. IR1150STRPBF FeaturesIR1150STRPBF ApplicationsThere are a lot of Infineon Technologies IR1150STRPBF PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | ICE1PCS01HKLA1 Overview8-DIP (0.300, 7.62mm) packages are available.It is packaged in a Tube way.As far as the mounting type of the device is concerned, it is Through Hole.In order to operate it, it should be connected to the voltage supply of 10.2V~21V.The device is set to operate at -40°C~125°C.There are also other types of ICs in the part, such as the POWER FACTOR CONTROLLER type.Several 8 terminals are present on the gadget.Current startup state is 100μA.There is no change to the pin number of the component.This device has a number of ICE1PCS01 in its best part.There is a switching frequency of 133kHz.A 8 pin sum is present in it.Its input voltage (Max) is 21V.There is a mountain named Mount Through Hole that consists of it.A maximum of 1.5A output current is provided by it ICE1PCS01HKLA1 FeaturesICE1PCS01HKLA1 ApplicationsThere are a lot of Infineon Technologies ICE1PCS01HKLA1 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | TDA16888G Overview20-SOIC (0.295, 7.50mm Width) packages are available.In a Tube format, it is packaged.It has a Surface Mount mounting type.The voltage supply of 0V~17.5V should be used.There is a setting on the device to operate at -25°C~85°C.There are also other types of ICs in the part, such as the POWER FACTOR CONTROLLER WITH POST REGULATOR type.The gadget comes with several 20 terminals.It is currently set to 50μA at startup.It should be noted that the pin number of this component remains at 22.There are a number of TDA16888s in the device's best feature.The switching frequency is 200kHz.There are a total of 20 pins on it.I guess you could say it's a subclass of Switching Regulator or Controllers in a way.There is a maximum voltage (Max) for its input.Located on Mount Surface Mount, it is a part of the mountain range.A maximum of 0.2A output current is provided by it TDA16888G FeaturesTDA16888G ApplicationsThere are a lot of Infineon Technologies TDA16888G PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | TDA4863-2 OverviewThere is a 8-DIP (0.300, 7.62mm) package that comes with it.A Tube-package is used.Depending on the device, the mounting type will either be Through Hole or C.It should be powered by 12.5V~20V's voltage supply.The device is set to operate at -40°C~150°C.As well as the POWER FACTOR CONTROLLER integrated circuit, this part contains other types of integrated circuits as well.8 terminals are found on the gadget.Startup current is 20μA.It should be noted that the pin number of this component remains at 8.I think the best thing about this device is that there is a number of TDA4863 in it.In this case, it has a sum of 8 pins.There is a minimum input voltage of 10.5V that can make it function properly.It's like a subclass of Switching Regulator or Controllers.Power for the component is always provided by a 14.5V volt supply.If you want to stop the power supply current from exceeding 6mA, the maximum supply current shall be Isup.There are 14.5V supplies on the device. TDA4863-2 FeaturesTDA4863-2 ApplicationsThere are a lot of Infineon Technologies TDA4863-2 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2817PWG4 OverviewThere is a 16-TSSOP (0.173, 4.40mm Width) package that comes with it.A Tube-package is used.The device's mounting type is Surface Mount.The voltage supply of 12V~17V should be used to operate it.-40°C~85°C is the operating frequency of the device.Besides POWER FACTOR CONTROLLER, there are other types of IC in this part.A number of 16 terminals can be found on the device.Currently, the startup current is 150μA.The pin number of the component remains 16.There are a number of UCC2817s in the device's best feature.In this case, 6kHz~220kHz is the switching frequency.There are 16 pins in this board, which make up its sum.Minimum input voltage 10.3V is needed to operate it.There is a sense in which it is a subclass of Switching Regulator or Controllers.Its input voltage (Max) is 15V.Keeping its frequency at 250kHz allows it to maintain good accuracy.Located on Mount Surface Mount, it is a part of the mountain range.In terms of output current, it works at the maximum in 1.2A UCC2817PWG4 FeaturesUCC2817PWG4 ApplicationsThere are a lot of Texas Instruments UCC2817PWG4 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UC3855ANG4 OverviewThere is a 20-DIP (0.300, 7.62mm) package that comes with it.In a Tube format, it is packaged.It has a Through Hole mounting type.The voltage supply of 15.5V~20V should be used to operate it.The device is set to operate at 0°C~70°C.There are also other types of ICs in the part, such as the POWER FACTOR CONTROLLER type.On the gadget, there are a number of 20 terminals that can be found.It is currently set to 150μA at startup.Pin number 20 remains the same for the component.There are a number of UC3855s in the device's best feature.There are a total of 20 pins on it.The system can operate with a minimum input voltage of 15V.I suppose it can be considered a subclass of Switching Regulator or Controllers.There is a maximum voltage (Max) for its input.As long as the frequency is kept constant at 500kHz, it is possible to continue to operate with good accuracy.Through Hole mount includes it.There are numerous 2 outputs.In this case, the supply current of the gadget is set to 17mA.You can operate it with the output 12.8V as well. UC3855ANG4 FeaturesUC3855ANG4 ApplicationsThere are a lot of Texas Instruments UC3855ANG4 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | TDA16888 OverviewPackaged in a 20-DIP (0.300, 7.62mm) format.In a Tube format, it is packaged.As far as the mounting type of the device is concerned, it is Through Hole.It should operate with the voltage supply of 0V~17.5V.-25°C~85°C is the operating frequency of the device.There are also other types of ICs in the part, such as the POWER FACTOR CONTROLLER WITH POST REGULATOR type.20 terminals are found on the gadget.The startup current is 50μA.Pin number 20 remains the same for the component.This device has a number of TDA16888 in its best part.200kHz is the switching frequency.In this case, it has a sum of 20 pins.There is a sense in which it is a subclass of Switching Regulator or Controllers.The maximum input voltage (Max) of the circuit is 16V.Located on Mount Through Hole, it is a part of the mountain range.The maximum output current it can deliver is 0.2A TDA16888 FeaturesTDA16888 ApplicationsThere are a lot of Infineon Technologies TDA16888 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2817ANG4 OverviewCurrently, it is available as a 16-DIP (0.300, 7.62mm) package.The packaging is Tube-shaped.It has a Through Hole mounting type.With a voltage supply of 12V~17V, it should work.At -40°C~85°C, the device operates.Other IC types exist, such as POWER FACTOR CONTROLLER.On the gadget, there are several 16 terminals.Currently, the startup current is 150μA.There is no change to the pin number of the component.The device's best part has a number of UCC2817 in it.In this case, 6kHz~220kHz is the switching frequency.The 16 pins are summed up.With a minimum input voltage of 10.3V, it is capable of functioning.There is a sense in which it is a subclass of Switching Regulator or Controllers.There is a maximum voltage (Max) for its input.When the frequency is 250kHz, it is still able to maintain good accuracy.At most, it works on 1.2A output currentAs long as the supply temperature is at least 6mA, the device will work. UCC2817ANG4 FeaturesUCC2817ANG4 ApplicationsThere are a lot of Texas Instruments UCC2817ANG4 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC28502DW OverviewIn a 20-SOIC (0.295, 7.50mm Width) package, it is available.There is a Tube package for this product.Surface Mount is the device's mounting type.It should operate with the voltage supply provided by 9.7V~18V.At -40°C~85°C, the device operates.There are other IC types in this part, such as POWER FACTOR CONTROLLER WITH POST REGULATOR.On the gadget, there are several 20 terminals.150μA is the startup current.Pin number 20 remains unchanged.One of the best parts of the device is the fact that it has a number of UCC28502.Switching occurs at a frequency of 100kHz.In this case, it has a sum of 20 pins.If the input voltage of the device is as low as 10.3V, it can function properly.I suppose it can be considered a subclass of Switching Regulator or Controllers.The input voltage of the device (Max) is 15V.An accurate operation is possible with 200kHz as the frequency.There is a mountain named Mount Surface Mount that consists of it.In terms of output current, it works at the maximum in 1.2AThere are other features such as CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE to name a few. UCC28502DW FeaturesUCC28502DW ApplicationsThere are a lot of Texas Instruments UCC28502DW PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2818DTRG4 OverviewA 16-SOIC (0.154, 3.90mm Width) package contains it.A Tape & Reel (TR)-packaging method was used to package it.Depending on the device, the mounting type will either be Surface Mount or C.With 12V~17V as the voltage supply, it should work.Currently, the device is set to operate at -40°C~85°C o'clock.POWER FACTOR CONTROLLER is another IC type on the part.The gadget has several 16 terminals.150μA is the startup current.Pin number 16 remains unchanged.There is a number of UCC2818 in the device's best part.In this case, 6kHz~220kHz is the switching frequency.It has a sum of 16 pins.With a minimum input voltage of 10.3V, it can function.As a kind of subclass of Switching Regulator or Controllers, it can be seen as a kind of subclass of Switching Regulator or Controllers.It has a maximum input voltage (Max) of 15V.This device can continue to function accurately with a frequency of 250kHz.In terms of output current, it works at the maximum in 1.2A UCC2818DTRG4 FeaturesUCC2818DTRG4 ApplicationsThere are a lot of Texas Instruments UCC2818DTRG4 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC28501DWTR OverviewThere is a 20-SOIC (0.295, 7.50mm Width) package that comes with it.In a Tape & Reel (TR) format, it is packaged.There is a Surface Mount mounting type on the device.It should operate with the voltage supply of 9.7V~18V.-40°C~85°C is the device's operating mode.As well as POWER FACTOR CONTROLLER WITH POST REGULATOR ICs, the part has other IC types.A number of 20 terminals can be found on the device.Current startup state is 150μA.This component retains the pin number at 20 even though the pin number has been changed.UCC28501 is the device's best feature.80kHz~120kHz is the switching frequency.There are a total of 20 pins on it.The system can operate with a minimum input voltage of 10.3V.There is a sense in which it is a subclass of Switching Regulator or Controllers.15V is the maximum input voltage (Max) of this device.Keeping its frequency at 200kHz allows it to maintain good accuracy.Mount Surface Mount contains it.It works in 1.2A output current at mostIt should also be noted that there are other features, for example, CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE. UCC28501DWTR FeaturesUCC28501DWTR ApplicationsThere are a lot of Texas Instruments UCC28501DWTR PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC28501DWTRG4 OverviewA 20-SOIC (0.295, 7.50mm Width) package contains it.The package is designed in the Tape & Reel (TR) shape.There is a Surface Mount mounting type for the device.With 9.7V~18V as the voltage supply, it should work.Device -40°C~85°C is set to operate.As well as the POWER FACTOR CONTROLLER WITH POST REGULATOR integrated circuit, this part contains other types of integrated circuits as well.20 terminals are found on the gadget.Currently, the startup current is 150μA.It should be noted that the pin number of this component remains at 20.There is a number of UCC28501 in the device's best part.There is a frequency of switching called 80kHz~120kHz.20 pins make up its sum.There is a minimum input voltage of 10.3V that can make it function properly.Switching Regulator or Controllers is a subclass of it in some ways.There is a maximum voltage (Max) for its input.With a frequency of 200kHz, it can continue to operate accurately.There is a mountain named Mount Surface Mount that consists of it.The maximum output current it can deliver is 1.2ACAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE, for instance, is another feature. UCC28501DWTRG4 FeaturesUCC28501DWTRG4 ApplicationsThere are a lot of Texas Instruments UCC28501DWTRG4 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC28502N OverviewPackaged in a 20-DIP (0.300, 7.62mm) format.The package is designed in the Tube shape.There is a Through Hole mounting type on the device.In order to operate, it should be plugged into 9.7V~18V's voltage supply.Currently, the device is set to operate at a frequency of -40°C~85°C.In addition to POWER FACTOR CONTROLLER WITH POST REGULATOR, the part has other types of ICs.The gadget has a number of 20 terminals on the back of it.Currently, the startup current is 150μA.Pin 20 remains the component's pin number.This device has a number of UCC28502 in its best part.Switching frequency 100kHz is what determines the switching frequency.A 20 pin sum is present in it.It can function with a minimum input voltage of 10.3V.It's like a subclass of Switching Regulator or Controllers.Its input voltage (Max) is 15V.There is a mountain named Mount Through Hole that consists of it.A maximum of 1.2A output current is provided by itCAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE is just one of the many features available. UCC28502N FeaturesUCC28502N ApplicationsThere are a lot of Texas Instruments UCC28502N PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC28521DWRG4 OverviewA 20-SOIC (0.295, 7.50mm Width) package contains it.A Tape & Reel (TR)-package is used.It has a Surface Mount mounting type.With 9.7V~18V as the voltage supply, it should work.-40°C~105°C is the device's operating mode.As well as POWER FACTOR CONTROLLER WITH POST REGULATOR ICs, the part has other IC types.The gadget has a number of 20 terminals on the back of it.It is currently set to 100μA at startup.A component's pin number remains 20.One of the device's best parts is that it has a number of UCC28521 on it.There is a switching frequency of 200kHz.The 20 pins are summed up.With a minimum input voltage of 10.6V, it can function.As a kind of subclass of Switching Regulator or Controllers, it can be seen as a kind of subclass of Switching Regulator or Controllers.15V is the maximum input voltage (Max) of this device.The maximum output current it can deliver is 3.5AAmong the other features that are available are PEAK CURRENT MODE ALSO AVAILABLE, to name just a few. UCC28521DWRG4 FeaturesUCC28521DWRG4 ApplicationsThere are a lot of Texas Instruments UCC28521DWRG4 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC28502DWG4 OverviewThe package is 20-SOIC (0.295, 7.50mm Width)-shaped.The packaging is Tube-shaped.It has a Surface Mount mounting type.With a voltage supply of 9.7V~18V, it should work.Device -40°C~85°C operates at -40°C~85°C.POWER FACTOR CONTROLLER WITH POST REGULATOR is another IC type on the part.The gadget has several 20 terminals.The startup current is 150μA.There is no change to the pin number of the component.UCC28502 is the device's best feature.Switching frequency 100kHz is what determines the switching frequency.There are a total of 20 pins on it.With a minimum input voltage of 10.3V, it is capable of functioning.I suppose it can be considered a subclass of Switching Regulator or Controllers.Its input voltage (Max) is 15V.As long as the frequency is kept constant at 200kHz, it is possible to continue to operate with good accuracy.Located on Mount Surface Mount, it is a part of the mountain range.The maximum output current it can deliver is 1.2ACAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE is one of the other features available. UCC28502DWG4 FeaturesUCC28502DWG4 ApplicationsThere are a lot of Texas Instruments UCC28502DWG4 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC28501NG4 OverviewIt comes in a 20-DIP (0.300, 7.62mm) package.In a Tube format, it is packaged.There is a Through Hole mounting type on the device.In order to operate it, it should be connected to the voltage supply of 9.7V~18V.The device is set to operate at -40°C~85°C.Other IC types exist, such as POWER FACTOR CONTROLLER WITH POST REGULATOR.The gadget has a number of 20 terminals on the back of it.150μA represents the startup current.It should be noted that the pin number of this component remains at 20.In terms of its best part, the device has a number of UCC28501.There is a switching frequency of 80kHz~120kHz.The 20 pins are summed up.If the input voltage of the device is as low as 10.3V, it can function properly.It's like a subclass of Switching Regulator or Controllers.15V is the maximum input voltage (Max) of this device.Keeping its frequency at 200kHz allows it to maintain good accuracy.Through Hole mount includes it.It works in 1.2A output current at mostIt should also be noted that there are other features, for example, CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE. UCC28501NG4 FeaturesUCC28501NG4 ApplicationsThere are a lot of Texas Instruments UCC28501NG4 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments |
25
In-stock
|
Get Quote | ||||
Texas Instruments | UCC28528DWRG4 OverviewA 20-SOIC (0.295, 7.50mm Width) package contains it.A Tape & Reel (TR)-package is used.As far as the mounting type of the device is concerned, it is Surface Mount.It should operate with the voltage supply provided by 9.7V~18V.At -40°C~105°C, the device operates.As well as POWER FACTOR CONTROLLER WITH POST REGULATOR ICs, the part has other IC types.The gadget has a number of 20 terminals on the back of it.There is a current of 100μA at startup.Pin number 20 remains unchanged.UCC28528 is the device's best feature.There is a switching frequency of 200kHz.The 20 pins are summed up.There is a minimum input voltage of 10.6V that can make it function properly.I guess you could say it's a subclass of Switching Regulator or Controllers in a way.The output voltage (Max) of this device is 15V.A maximum of 3.5A output current is provided by itIt should also be noted that there are other features, for example, PEAK CURRENT MODE ALSO AVAILABLE. UCC28528DWRG4 FeaturesUCC28528DWRG4 ApplicationsThere are a lot of Texas Instruments UCC28528DWRG4 PFC PMICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UC2853AN OverviewCurrently, it is available as a 8-DIP (0.300, 7.62mm) package.The packaging is Tube-shaped.There is a Through Hole mounting type on the device.12V~40V should supply the voltage to it.Currently, the device is set to operate at a frequency of -25°C~85°C.Besides POWER FACTOR CONTROLLER, there are other types of IC in this part.On the gadget, there are several 8 terminals.There is a current of 250μA at startup.The component's pin number remains 8.One of the device's best parts is that it has a number of UC2853 on it.There is a frequency of switching called 56kHz~94kHz.I guess you could say it's a subclass of Switching Regulator or Controllers in a way.With a frequency of 115kHz, it will continue to function with a good degree of accuracy for a long time to come.Power is always provided by 16V volts.1 outputs are numerous. UC2853AN FeaturesUC2853AN ApplicationsThere are a lot of Texas Instruments UC2853AN PFC PMICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.