Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | CD74HC595MTE4 OverviewThe device is embedded in SOIC package. 16 is the total number of terminations on the chip. The case Tape and Reel contains it. The part's operating supply voltage is rated 5V. There are 1 elements on this part. 16 pins are located on the device. The recommended mounting method is Surface Mount. There is an electronic component in the HC/UH. According to the specification, this chip's operating supply voltage falls within the range of 5V. The total number of IC chip bits is 8. In total, it has 16 pins. A temperature below 125°C is recommended for its use. For this device to work, it should not go below -55°C. Under 6V, this supply voltage is employed. It is used at a higher voltage than 2V. Operation is available on only 9 output lines. CD74HC595MTE4 FeaturesWith 16 pins Operate supply voltage at 5V With 9 output lines CD74HC595MTE4 ApplicationsThere are a lot of Texas Instruments CD74HC595MTE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV595ANS OverviewSOP is the package in which the device is embedded. The number of the chip's terminations sums up to 16. Parts with a 2.5V operating supply voltage are specified. In the LV/LV-A/LVX/H series, the electronic component belongs. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. For this part, Vsup should not be less than 2V. Voltage can be delivered at 3.3V by the device. Vsup cannot exceed 5.5V for this part. A total of 8 bits are present on the IC chip. It has a total of zero pins. Using it above 85°C temperatures is not recommended. A 9 output is present on the part. SN74LV595ANS FeaturesIt supplies 3.3V power SN74LV595ANS ApplicationsThere are a lot of Texas Instruments SN74LV595ANS Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HC595DWG4 OverviewEmbedded in a package of type SOIC, the device is available for use. Taking the total number of terminations on the chip and adding them up, we get 16. Voltage rating of the part is 5V. The part consists of 1 elements. Devices with 16 pins are available. It is recommended to mount by Surface Mount. Electronic components are categorized as HC/UH. It's noted that the chip's operating supply voltage is in the range 5V. Please take note of the following additional aspects of this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There are 8 bits in the IC chip. 16 pins are on it. Under temperatures below 85°C, it is recommended to use it. In order to operate the device, the value should not fall below -40°C. We use this supply voltage under 6V. The supply voltage is higher than 2V. It is necessary to operate 9 output lines. SN74HC595DWG4 FeaturesWith 16 pins Operate supply voltage at 5V With 9 output lines SN74HC595DWG4 ApplicationsThere are a lot of Texas Instruments SN74HC595DWG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS322ADW OverviewThe device is embedded in SOIC package. There are 20 terminations on the chip. The part operates at 5V voltage. Electronic components fall under the category of LS. Additional aspects of this section are as follows: COMMON I/O PINS; SIGN EXTEND FUNCTION; TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT. This part should have a minimum supply voltage (Vsup) of at least 4.75V. A device capable of delivering voltage at 5V can be used. It should not exceed 5.25V in terms of the supply voltage (Vsup). IC chips contain a total of 8 bits. In terms of its subcategory, it belongs to Shift Registers. Temperatures greater than 70°C should not be used. SN74LS322ADW FeaturesIt supplies 5V power SN74LS322ADW ApplicationsThere are a lot of Texas Instruments SN74LS322ADW Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ALS164ANSRE4 OverviewSOIC is a package containing the embedded device. This chip has a total termination count of 14. Presented in a case of Tape & Reel (TR). Parts with a 5V operating supply voltage are specified. Devices with 14 pins are available. Using Surface Mount as a mount point is recommended. In the ALS series, the electronic component belongs. In terms of supply voltage, this chip operates within the range of 5V. There are also the following additional considerations in this section: AND-GATED SERIAL (A AND B) INPUTS. This device has 2 input lines available. Voltage can be delivered at 5V. It has a total of 8 pins. This board has 14 pins in total. Temperatures below 70°C are recommended for use. For this device to work, it should not go below 0°C. A voltage of 5.5V is used to supply this voltage. It is used at a higher voltage than 4.5V. It is necessary to operate 8 output lines of the system. 1 circuits are present in this device. SN74ALS164ANSRE4 FeaturesWith 14 pins Operate supply voltage at 5V It supplies 5V power With 8 output lines SN74ALS164ANSRE4 ApplicationsThere are a lot of Texas Instruments SN74ALS164ANSRE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74ALS323N3 OverviewPDIP is a package containing the embedded device. It sums up to 20 where the chip's terminations add up. Its operating supply voltage is rated at 5V. It has 20 pins. There is an electronic component in the ALS. The following additional elements are important to note: COMMON I/O PINS; GATED OUTPUT ENABLE INPUT. This part should have a minimum supply voltage (Vsup) of at least 4.5V. Voltage can be delivered at 5V. In this part, the maximum supply voltage (Vsup) should not exceed 5.5V. A total of 8 bits are present on an IC chip. It has a total of zero pins. It should only be used at temperatures no greater than 70°C. SN74ALS323N3 FeaturesWith 20 pins It supplies 5V power SN74ALS323N3 ApplicationsThere are a lot of Texas Instruments SN74ALS323N3 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV165ADBRG4 OverviewSSOP package contains the device. It sums up to 16 where the chip's terminations add up. A Tape and Reel case holds it. Voltage rating of the part is 2.5V. It is a part that has 1 elements on it. It is equipped with a pin count of 16. Surface Mount is recommended for mounting. It is a component of the LV/LV-A/LVX/H. 5V is noted as the operating supply voltage of this chip. Additionally, this section contains the following: SISO OPERATION ALSO AVAILABLE. The device has a total of 9 input lines. It can deliver voltage at 3.3V. IC chip bits total 8. The pin count is 16. A temperature below 85°C is recommended for its use. For this device to work, it should not go below -40°C. We use this supply voltage under 5.5V. Voltages higher than 2V are used for this supply. There is a subcategory of it called Shift Registers. There are 2 outputs available on this part. SN74LV165ADBRG4 FeaturesWith 16 pins Operate supply voltage at 5V It supplies 3.3V power SN74LV165ADBRG4 ApplicationsThere are a lot of Texas Instruments SN74LV165ADBRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments |
999
In-stock
|
Get Quote | ||||
Texas Instruments | SN74LV165ADGVRG4 OverviewTFSOP is a package containing the embedded device. The number of the chip's terminations sums up to 16. A Tape & Reel (TR) case holds it. There is 2.5V operating supply voltage listed on the part. There are 1 elements on this part. In this device, there are 16 pins. As a general recommendation, mounting by Surface Mount is recommended. Electronic components fall under the category of LV/LV-A/LVX/H. It's noted that the chip's operating supply voltage is in the range 5V. Additional aspects of this section are as follows: SISO OPERATION ALSO AVAILABLE. In this device, there are 9 input lines. Voltage can be delivered at 3.3V. It has 8 bits in total. It has a total of zero pins. Temperatures below 85°C are recommended for use. In order for this device to function, the value should not be less than -40°C. Under 5.5V, this supply voltage is employed. This supply voltage is employed higher than 2V. Its subcategory belongs to Shift Registers. A 2 output is present on the part. SN74LV165ADGVRG4 FeaturesWith 16 pins Operate supply voltage at 5V It supplies 3.3V power SN74LV165ADGVRG4 ApplicationsThere are a lot of Texas Instruments SN74LV165ADGVRG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74178N OverviewPDIP is a package containing the embedded device. The number of the chip's terminations sums up to 14. Parts with a 5V operating supply voltage are specified. Electronic components belong to the TTL/H/L group. Additionally, this section contains the following: HOLD MODE. For this part, Vsup should not be less than 4.75V. A maximum supply voltage (Vsup) of 5.25V may be applied to this part. A total of 4 bits are present on an IC chip. Temperatures greater than 70°C should not be used. SN74178N FeaturesSN74178N ApplicationsThere are a lot of Texas Instruments SN74178N Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD54HCT299F3A OverviewIn package CDIP, there is an embedded device. It sums up to 20 where the chip's terminations add up. There is a Rail/Tube case containing it. There is 5V operating supply voltage listed on the part. A total of 1 elements are present on this part. The device is equipped with 20 pins. Through Hole is recommended for mounting. The electronic component belongs to the HCT. 5V is noted as the operating supply voltage of this chip. Additional aspects of this section include: COMMON I/O PINS; GATED OUTPUT CONTROL. Voltage can be delivered at 5V by the device. There are 8 bits in the IC chip. The total number of pins is 20. Under temperatures below 125°C, it is recommended to use it. This device should not be operated below -55°C. A voltage of 5.5V is employed as the supply voltage. This supply voltage is employed higher than 4.5V. There is a quiescent current of 8μA running through it. CD54HCT299F3A FeaturesWith 20 pins Operate supply voltage at 5V It supplies 5V power Quiescent Current at 8μA CD54HCT299F3A ApplicationsThere are a lot of Texas Instruments CD54HCT299F3A Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD4031BPWE4 OverviewIn package TSSOP, there is an embedded device. A total of 16 terminations can be found on the chip. It is packed in a case number Rail/Tube. 5V is the operating supply voltage of the part. 16 pins are provided on the device. As a general recommendation, mounting by Surface Mount is recommended. As noted, this chip operates within the range of 15V. This section has the following additional features: DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING. The device has a total of 2 input lines. There are 64 bits in the IC chip. The pin count is 16. Temperatures below 125°C are recommended for use. Ideally, it should not fall below -55°C. This supply voltage is employed under 18V. It is used at a higher voltage than 3V. There are 3 output lines to operate. The subcategory of this item is Shift Registers. In this device, there are 1 circuits. CD4031BPWE4 FeaturesWith 16 pins Operate supply voltage at 15V With 3 output lines CD4031BPWE4 ApplicationsThere are a lot of Texas Instruments CD4031BPWE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74AHC594NSRE4 OverviewThere is a SOP package embedded with the device. There are 16 terminations on the chip. The Tape & Reel (TR) case contains it. 3.3V is the operating supply voltage of the part. On this part, there are 1 elements. It has 16 pins. Surface Mount is recommended for mounting. An electronic component is included in the AHC/VHC/H/U/V. It is noted that this chip uses an operating supply voltage of 5V. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A total of 8 bits are present on the IC chip. There are a total of 16 pins on it. Temperatures below 125°C are recommended for use. Ideally, it should not fall below -40°C. 5.5V is the supply voltage used. The supply voltage is higher than 2V. Operating on 9 output lines is possible. SN74AHC594NSRE4 FeaturesWith 16 pins Operate supply voltage at 5V With 9 output lines SN74AHC594NSRE4 ApplicationsThere are a lot of Texas Instruments SN74AHC594NSRE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 5962-88602013A OverviewThere are 28 terminations on the chip. Voltage rating of the part is 5V. 1 elements are present in this part. In this device, there are 28 pins. The recommended mounting method is Surface Mount. It is a component of the LS. In terms of supply voltage, this chip operates within the range of 5V. The total number of IC chip bits is 16. It has a total of 28 pins. Under 125°C, it is recommended that it be used. Operation of this device requires a value greater than -55°C. 5.5V is the supply voltage used. This supply voltage is employed higher than 4.5V. There is a TUBE package for the part. 5962-88602013A FeaturesWith 28 pins Operate supply voltage at 5V Packing Method : TUBE 5962-88602013A ApplicationsThere are a lot of Texas Instruments 5962-88602013A Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | V62/04696-01XE OverviewTSSOP is the package in which the device is embedded. There are 16 terminations on the chip. This part has an operating supply voltage of 2.5V. This part has 1 elements. It has 16 pins. As a general recommendation, mounting by Surface Mount is recommended. It is a component of the LV/LV-A/LVX/H. This chip's operating supply voltage is reported as 5V. Additional aspects of this section are as follows: SISO OPERATION ALSO AVAILABLE. Voltage can be delivered at 3.3V. There are 8 bits in the IC chip. This board has 16 pins in total. It is recommended that it be used at temperatures below 85°C. Ideally, it should not fall below -40°C. We use this supply voltage under 5.5V. This supply voltage is employed higher than 2V. A total of 9 output lines are available for operation. Packaging is in the form of TR. V62/04696-01XE FeaturesWith 16 pins Operate supply voltage at 5V It supplies 3.3V power With 9 output lines Packing Method : TR V62/04696-01XE ApplicationsThere are a lot of Texas Instruments V62/04696-01XE Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SNJ54S194W Overview16 is the sum of the number of terminations in the chip. Presented in a case of Rail/Tube. The part's operating supply voltage is rated 5V. On this part, there are 1 elements. 16 pins are available on the device. Surface Mount is recommended for mounting. In the S series, the electronic component belongs. It's noted that the chip's operating supply voltage is in the range 5V. This section has the following additional features: HOLD MODE. There is a possibility of delivering voltage at 5V. The total number of IC chip bits is 4. It has a total of zero pins. Under temperatures below 125°C, it is recommended to use it. For this device to work, it should not go below -55°C. 5.5V is the supply voltage used. This supply voltage is employed higher than 4.5V. SNJ54S194W FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power SNJ54S194W ApplicationsThere are a lot of Texas Instruments SNJ54S194W Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 8001701EA OverviewCDIP is a package containing the embedded device. A total of 16 terminations can be found on the chip. There is a Rail/Tube case containing it. Voltage rating of the part is 5V. This part has 1 elements. 16 pins are available on the device. Using Through Hole as a mount point is recommended. There is an electronic component in the LS. It is noted that this chip uses an operating supply voltage of 5V. Additionally, please note the following: CLOCK INHIBIT. There is a capability to deliver voltage at 5V. The total number of IC chip bits is 8. There are a total of 16 pins on it. It is recommended that it be used at temperatures below 125°C. It should not be lower than -55°C to operate this device. Under 5.5V, this supply voltage is employed. It is used at a voltage greater than 4.5V. 8001701EA FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power 8001701EA ApplicationsThere are a lot of Texas Instruments 8001701EA Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SNJ54LS164W OverviewTaking the total number of terminations on the chip and adding them up, we get 14. It is used to pack in Rail/Tube case. Voltage rating of the part is 5V. On this part, there are 1 elements. 14 pins are available on the device. As a general recommendation, mounting by Surface Mount is recommended. Electronic components belong to the LS group. In terms of supply voltage, this chip operates within the range of 5V. Taking note of the following additional details: GATED SERIAL INPUTS (A AND B). A voltage of 5V is possible with this device. The total number of IC chip bits is 8. 14 pins are on it. Temperatures below 125°C are recommended for use. Operation of this device requires a value greater than -55°C. 5.5V is the supply voltage used. It is used at a voltage greater than 4.5V. SNJ54LS164W FeaturesWith 14 pins Operate supply voltage at 5V It supplies 5V power SNJ54LS164W ApplicationsThere are a lot of Texas Instruments SNJ54LS164W Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD54HC194F3A OverviewThis device can be found embedded within the package CDIP. Chip terminations add up to 16. The Rail/Tube case contains it. 4.5V is the operating supply voltage of the part. There are 1 elements on this part. In this device, there are 16 pins. Through Hole is recommended for mounting. This electronic component is classified as HC/UH. This section has the following additional features: HOLD MODE. The total number of IC chip bits is 4. 16 pins are on it. Under 125°C, it is recommended that it be used. This device should not be operated with a value lower than -55°C. A voltage of 6V is employed as the supply voltage. Voltages higher than 2V are used for this supply. A quiescent current of 8μA is used. CD54HC194F3A FeaturesWith 16 pins Quiescent Current at 8μA CD54HC194F3A ApplicationsThere are a lot of Texas Instruments CD54HC194F3A Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SNJ54HC195J OverviewEmbedded in a package of type CDIP, the device is available for use. The number of the chip's terminations sums up to 16. This item is packed in case Rail/Tube. The part's operating supply voltage is rated 5V. There are 1 elements on this part. 16 pins are available on the device. Through Hole is recommended for mounting. Electronic components belong to the HC/UH group. 5V is noted as the operating supply voltage of this chip. There are also the following additional considerations in this section: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. The total number of IC chip bits is 4. The total number of pins is 16. At temperatures below 125°C, it is recommended for use. For this device to operate, it cannot be lower than -55°C. This supply voltage is employed under 6V. A voltage higher than 2V is used as a supply voltage. SNJ54HC195J FeaturesWith 16 pins Operate supply voltage at 5V SNJ54HC195J ApplicationsThere are a lot of Texas Instruments SNJ54HC195J Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SNJ54HC165FK Overview20 is the sum of the number of terminations in the chip. Parts with a 5V operating supply voltage are specified. This part has 1 elements. The device is equipped with 20 pins. It is recommended that the mount should be done by Surface Mount. Electronic components fall under the category of HC/UH. It's noted that the chip's operating supply voltage is in the range 5V. There are also the following additional considerations in this section: SISO OPERATION ALSO AVAILABLE. The total number of IC chip bits is 8. 20 pins are on it. Temperatures below 125°C are recommended for use. For this device to work, it should not go below -55°C. Under 6V, this voltage is employed. It is important to note that this supply voltage is higher than 2V. In order to package the part properly, TUBE is used. SNJ54HC165FK FeaturesWith 20 pins Operate supply voltage at 5V Packing Method : TUBE SNJ54HC165FK ApplicationsThere are a lot of Texas Instruments SNJ54HC165FK Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN54LS165AJ OverviewThis device can be found embedded within the package CDIP. 16 is the sum of the number of terminations in the chip. The part's operating supply voltage is rated 5V. The part consists of 1 elements. It has 16 pins. As a general recommendation, mounting by Through Hole is recommended. In the LS series, the electronic component belongs. As noted, this chip operates within the range of 5V. Additional aspects of this section include: SISO OPERATION ALSO AVAILABLE. The device is capable of delivering voltage at 5V. A total of 8 bits are present on an IC chip. The pin count is 16. The product should be used at temperatures below 125°C. In order for this device to function, the value should not be less than -55°C. This supply voltage is employed under 5.5V. It is used at a higher voltage than 4.5V. There is TUBE packaging for this part. SN54LS165AJ FeaturesWith 16 pins Operate supply voltage at 5V It supplies 5V power Packing Method : TUBE SN54LS165AJ ApplicationsThere are a lot of Texas Instruments SN54LS165AJ Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS195AJ OverviewEmbedded in a package of type CDIP, the device is available for use. The number of the chip's terminations sums up to 16. Parts with a 5V operating supply voltage are specified. An electronic component is included in the LS. This section has the following additional features: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND K(BAR) SERIAL INPUT. For this part, Vsup should not be less than 4.75V. A voltage of 5V can be delivered by it. In this part, the maximum supply voltage (Vsup) should not exceed 5.25V. IC chips contain a total of 4 bits. The total number of pins is 16. Temperatures higher than 70°C should not be used. SN74LS195AJ FeaturesIt supplies 5V power SN74LS195AJ ApplicationsThere are a lot of Texas Instruments SN74LS195AJ Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | CD74HC165ME4 OverviewThere is a SOIC package embedded with the device. Taking the total number of terminations on the chip and adding them up, we get 16. It is used to pack in Rail/Tube case. Voltage rating of the part is 4.5V. It is a part that has 1 elements on it. There are 16 pins on the device. It is recommended to mount by Surface Mount in order to get the best results. Electronic components are categorized as HC/UH. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional aspects of this section are worth noting: SISO OPERATION ALSO AVAILABLE. In the device, there are 9 input lines. The total number of IC chip bits is 8. The pin count is 16. Using it below 125°C is recommended. In order to operate the device, the value should not fall below -55°C. It is employed under the condition of 6V. The supply voltage is higher than 2V. There is a quiescent current of 8μA in this circuit. CD74HC165ME4 FeaturesWith 16 pins Operate supply voltage at 5V Quiescent Current at 8μA CD74HC165ME4 ApplicationsThere are a lot of Texas Instruments CD74HC165ME4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LV595APWRE4 OverviewEmbedded in a package of type TSSOP, the device is available for use. There are 16 terminations on the chip. It is packed in a case number Tape and Reel. This part has an operating supply voltage of 2.5V. There are 16 pins on the device. Surface Mount is recommended for mounting. This electronic component is classified as LV/LV-A/LVX/H. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. In the device, there are 1 input lines. There is a capability to deliver voltage at 3.3V. There are 8 bits in the IC chip. In total, there are 16 pins on it. Under 85°C, it is recommended that it be used. In order to operate the device, the value should not fall below -40°C. It is used under the 5.5V supply voltage. A voltage higher than 2V is used as a supply voltage. It is necessary to operate 9 output lines. SN74LV595APWRE4 FeaturesWith 16 pins It supplies 3.3V power With 9 output lines SN74LV595APWRE4 ApplicationsThere are a lot of Texas Instruments SN74LV595APWRE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments |
1538
In-stock
|
Get Quote | ||||
Texas Instruments | SN74LS96J OverviewAs a result, CDIP package contains the embedded device. The number of the chip's terminations sums up to 16. Parts with a 5V operating supply voltage are specified. Electronic components are categorized as LS. Please take note of the following additional aspects of this section: CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD. It is recommended that this part's supply voltage (Vsup) must not be less than 4.75V. A voltage of 5V is possible with this device. Ideally, the maximum supply voltage (Vsup) should not exceed 5.25V. It has 5 bits in total. 16 pins are present on it. Using it above 70°C temperatures is not recommended. SN74LS96J FeaturesIt supplies 5V power SN74LS96J ApplicationsThere are a lot of Texas Instruments SN74LS96J Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74HC166DTG4 OverviewIn package SOIC, there is an embedded device. 16 is the number of terminations on the chip. Presented in a case of Tape & Reel (TR). Parts with a 5V operating supply voltage are specified. This part has 1 elements. It is equipped with a pin count of 16. Surface Mount is recommended for mounting. The electronic component belongs to the HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. This section has the following additional features: SISO OPERATION ALSO AVAILABLE. There are 9 input lines available in the device. The total number of IC chip bits is 8. There are a total of 16 pins on it. Temperatures below 85°C are recommended for use. In order for this device to function, the value should not be less than -40°C. A voltage of 6V is used to supply this voltage. This supply voltage is employed higher than 2V. This subcategory falls under the Shift Registers category. SN74HC166DTG4 FeaturesWith 16 pins Operate supply voltage at 5V SN74HC166DTG4 ApplicationsThere are a lot of Texas Instruments SN74HC166DTG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN74LS96N3 OverviewPDIP is the package in which the device is embedded. 16 is the number of terminations on the chip. This part has an operating supply voltage of 5V. Electronic components are categorized as LS. The minimum supply voltage (Vsup) for this part should not be less than 4.75V. It can deliver voltage at 5V. It is recommended that the maximum supply voltage for this part is not greater than 5.25V (Vsup). A total of 5 bits are present on the IC chip. 16 pins are present on it. In its subcategory, it is listed under Shift Registers. Temperatures higher than 70°C should not be used. SN74LS96N3 FeaturesIt supplies 5V power SN74LS96N3 ApplicationsThere are a lot of Texas Instruments SN74LS96N3 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | 74AC11898N OverviewThe device is embedded in PDIP package. This chip has a total termination count of 20. Parts with a 5V operating supply voltage are specified. An electronic component is included in the AC. There are also the following additional considerations in this section: CENTER VCC/GND PINS; FLOW THROUGH ARCHITECTURE. There should be no less than 3V supply voltage (Vsup) for this part. There is a possibility of delivering voltage at 3.3/5V. This part requires a maximum supply voltage (Vsup) of 5.5V. A total of 10 bits are present on an IC chip. 20 pins are on it. Shift Registers is its subcategory. Temperatures above 85°C must be avoided. 74AC11898N FeaturesIt supplies 3.3/5V power 74AC11898N ApplicationsThere are a lot of Texas Instruments 74AC11898N Shift Registers applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.