English
My Cart
Total：0Sub-Total : $0.00
Checkout

Gas Sensors(4391)

Image Part Manufacturer Description Stock Action
CD4031BPWG4
815-CD4031BPWG4
 Texas Instruments

CD4031BPWG4 Overview


There is a TSSOP package embedded with the device. There are 16 terminations on the chip. The case Rail/Tube contains it. 5V is the operating supply voltage of the part. Devices with 16 pins are available. The recommended mounting method is Surface Mount. A range of 15V is noted as the operating supply voltage of this chip. There are also the following additional considerations in this section: DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING. In this device, there are 2 input lines. The total number of IC chip bits is 64. 16 pins are present on it. At temperatures below 125°C, it is recommended for use. In order to operate the device, the value should not fall below -55°C. We use this supply voltage under 18V. This supply voltage is employed higher than 3V. There are 3 output lines to operate. Its subcategory belongs to Shift Registers. In this device, there are 1 circuits that are active at the same time.

CD4031BPWG4 Features


With 16 pins
Operate supply voltage at 15V
With 3 output lines

CD4031BPWG4 Applications


There are a lot of Texas Instruments CD4031BPWG4 Shift Registers applications.

  • Parallel to serial converter
  • Interconnectors
  • Serial-to-parallel data conversion
  • Serial to parallel converter
  • Flash Memory
  • data manipulation
  • Generate time delay toward digital circuits
  • Remote control holding register
  • Sequence generator
  • Pulse Extenders
999
In-stock
 Get Quote
SN74LV164ADBRE4
815-SN74LV164ADBRE4
 Texas Instruments

SN74LV164ADBRE4 Overview


There is a SSOP package embedded with the device. This chip has a total termination count of 14. Tape and Reel is the case in which it is packed. Parts with a 2.5V operating supply voltage are specified. The part consists of 1 elements. 14 pins are provided on the device. It is recommended to mount by Surface Mount in order to get the best results. There is an electronic component in the LV/LV-A/LVX/H. 5V is noted as the operating supply voltage of this chip. The following additional elements are important to note: AND-GATED SERIAL INPUTS (A AND B). A device with 2 input lines is available. Voltage can be delivered at 3.3V by the device. 14 pins are present on it. Under temperatures below 85°C, it is recommended to use it. This device should not be operated below -40°C. A voltage of 5.5V is employed as the supply voltage. This supply voltage is employed higher than 2V.

SN74LV164ADBRE4 Features


With 14 pins
Operate supply voltage at 5V
It supplies 3.3V power

SN74LV164ADBRE4 Applications


There are a lot of Texas Instruments SN74LV164ADBRE4 Shift Registers applications.

  • Pattern Recognizers
  • Remote control holding register
  • Pseudo Random Pattern Generator
  • 7-segment display control
  • ROM Chips
  • Data manipulation
  • Dual-rank shift, hold, and bus applications
  • Cache memory in CPU
  • Sequence generator
  • Parallel data
999
In-stock
 Get Quote
SN74AS194DRG4
815-SN74AS194DRG4
 Texas Instruments

SN74AS194DRG4 Overview


There is an embedded device in the package SOIC. It sums up to 16 where the chip's terminations add up. Tape & Reel (TR) is the case in which it is packed. Voltage rating of the part is 5V. Devices with 16 pins are available. It is recommended to mount by Surface Mount. In this case, the electronic component belongs to the AS. A range of 5V is noted as the operating supply voltage of this chip. The following additional aspects of this section are worth noting: HOLD MODE. In this device, there are 6 input lines. A device capable of delivering voltage at 5V can be used. There are 4 bits in the IC chip. 16 pins are on it. Using it below 70°C is recommended. In order to operate the device, the value should not fall below 0°C. We use this supply voltage under 5.5V. Voltages higher than 4.5V are used for this supply. There are 4 output lines to operate. An electronic device such as this one has 1 circuits in it.

SN74AS194DRG4 Features


With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 4 output lines

SN74AS194DRG4 Applications


There are a lot of Texas Instruments SN74AS194DRG4 Shift Registers applications.

  • Counter
  • LED matrix control
  • Cache memory in CPU
  • store data in digital form
  • temporary data storage
  • Flash Memory
  • Serial-to-parallel data conversion
  • Data Format Converters
  • Data Processors
  • Output expansion
999
In-stock
 Get Quote
SN74LS597NE4
815-SN74LS597NE4
 Texas Instruments

SN74LS597NE4 Overview


This device can be found embedded within the package PDIP. There are 16 terminations on the chip. Its operating supply voltage is rated at 5V. On this part, there are 1 elements. 16 pins are present on the device. Using Through Hole as a mount point is recommended. Electronic components fall under the category of LS. A range of 5V is noted as the operating supply voltage of this chip. Please take note of the following additional aspects of this section: COMMON I/O PINS; MIXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT. In the device, there are 9 input lines that are available for use. There are 8 bits in the IC chip. 16 pins are on it. Under temperatures below 70°C, it is recommended to use it. In order for this device to function, the value should not be less than 0°C. A voltage of this type is employed under 5.25V. It is used at a voltage greater than 4.75V.

SN74LS597NE4 Features


With 16 pins
Operate supply voltage at 5V

SN74LS597NE4 Applications


There are a lot of Texas Instruments SN74LS597NE4 Shift Registers applications.

  • temporary data storage
  • Flash Memory
  • Serial-to-parallel data conversion
  • Interconnectors
  • Sequence generator
  • data transfer
  • Generate time delay toward digital circuits
  • Delay Line
  • LED matrix control
  • Parallel data
999
In-stock
 Get Quote
CD74AC164M96G4
815-CD74AC164M96G4
 Texas Instruments

CD74AC164M96G4 Overview


There is a SOIC package embedded with the device. There are 14 terminations on the chip. A Tape and Reel case is used to pack it. 3V is the part's operating supply voltage. A total of 1 elements are present on this part. Devices with 14 pins are available. Using Surface Mount as a mount point is recommended. An electronic component is included in the AC. It's noted that the chip's operating supply voltage is in the range 5V. In the device, there are 2 input lines. There are a total of 14 pins on it. At temperatures below 125°C, it is recommended for use. Ideally, it should not fall below -55°C. A voltage of this type is employed under 5.5V. Voltages higher than 1.5V are used for this supply.

CD74AC164M96G4 Features


With 14 pins
Operate supply voltage at 5V

CD74AC164M96G4 Applications


There are a lot of Texas Instruments CD74AC164M96G4 Shift Registers applications.

  • Pseudo Random Pattern Generator
  • Serial-to-parallel data conversion
  • Serial-to-parallel data conversion
  • Remote control holding register
  • Data manipulation
  • Data Format Converters
  • Data Processors
  • Delay Line
  • data transfer
  • data manipulation
999
In-stock
 Get Quote
SN74LV595APWTE4
815-SN74LV595APWTE4
 Texas Instruments

SN74LV595APWTE4 Overview


TSSOP package contains the device. 16 is the sum of the number of terminations in the chip. The case Tape and Reel contains it. 2.5V is the operating supply voltage of the part. A total of 1 elements can be found on this part. It is equipped with a pin count of 16. As a general recommendation, mounting by Surface Mount is recommended. The electronic component belongs to the LV/LV-A/LVX/H. It's noted that the chip's operating supply voltage is in the range 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. Devices with voltage delivery capabilities of 3.3V are available. The total number of IC chip bits is 8. It has a total of zero pins. At temperatures below 85°C, it is recommended for use. Operation of this device requires a value greater than -40°C. Under 5.5V, this voltage is employed. This supply voltage is employed higher than 2V. There are 9 output lines to operate.

SN74LV595APWTE4 Features


With 16 pins
Operate supply voltage at 5V
It supplies 3.3V power
With 9 output lines

SN74LV595APWTE4 Applications


There are a lot of Texas Instruments SN74LV595APWTE4 Shift Registers applications.

  • LED matrix control
  • Data Format Converters
  • Serial-to-parallel data conversion
  • Parallel data
  • data manipulation
  • Remote control holding register
  • Cache memory in CPU
  • Delay Line
  • Generate time delay toward digital circuits
  • Parallel to serial converter
999
In-stock
 Get Quote
CD4031BPWRE4
815-CD4031BPWRE4
 Texas Instruments

CD4031BPWRE4 Overview


There is an embedded device in the package TSSOP. 16 is the total number of terminations on the chip. The Tape and Reel case contains it. Voltage rating of the part is 5V. The device is equipped with 16 pins. Using Surface Mount as a mount point is recommended. The operating supply voltage of this chip is noted to be within the range 15V. Additional aspects of this section are as follows: DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING. 2 input lines are available on the device. IC chips contain a total of 64 bits. It has a total of zero pins. A temperature below 125°C is recommended for its use. Operation of this device requires a value greater than -55°C. Under 18V, this supply voltage is employed. This supply voltage is employed higher than 3V. The number of output lines to be operated is 3. Its subcategory belongs to Shift Registers. In this device, there are 1 circuits.

CD4031BPWRE4 Features


With 16 pins
Operate supply voltage at 15V
With 3 output lines

CD4031BPWRE4 Applications


There are a lot of Texas Instruments CD4031BPWRE4 Shift Registers applications.

  • Pattern Recognizers
  • Serial to parallel converter
  • Counter
  • Remote control holding register
  • Generate time delay toward digital circuits
  • Pulse Extenders
  • Serial-to-parallel data conversion
  • store data in digital form
  • data manipulation
  • Pseudo Random Pattern Generator
999
In-stock
 Get Quote
CD74HC595MTG4
815-CD74HC595MTG4
 Texas Instruments

CD74HC595MTG4 Overview


In package SOIC, there is an embedded device. This chip has a total termination count of 16. This item is packed in case Tape and Reel. The part operates at 5V voltage. There are 1 elements on this part. There are 16 pins on the device. Using Surface Mount as a mount point is recommended. There is an electronic component in the HC/UH. According to the specification, this chip's operating supply voltage falls within the range of 5V. A total of 8 bits are present on the IC chip. It has a total of zero pins. A temperature below 125°C is recommended for its use. This device should not be operated below -55°C. Under 6V, this voltage is employed. It is important to note that this supply voltage is higher than 2V. A total of 9 output lines are available for operation.

CD74HC595MTG4 Features


With 16 pins
Operate supply voltage at 5V
With 9 output lines

CD74HC595MTG4 Applications


There are a lot of Texas Instruments CD74HC595MTG4 Shift Registers applications.

  • 7-segment display control
  • Parallel data
  • Remote control holding register
  • temporary data storage
  • Serial to parallel converter
  • Serial-to-parallel data conversion
  • Data Format Converters
  • Sequence generator
  • Output expansion
  • Pulse Extenders
999
In-stock
 Get Quote
CD74ACT164ME4
815-CD74ACT164ME4
 Texas Instruments

CD74ACT164ME4 Overview


SOIC package contains the device. A total of 14 terminations can be found on the chip. The case Rail/Tube contains it. Voltage rating of the part is 5V. On this part, there are 1 elements. There are 14 pins on the device. The recommended mounting method is Surface Mount. In the ACT series, the electronic component belongs. The operating supply voltage of this chip is noted to be within the range 5V. The device has a total of 2 input lines. There is a possibility of delivering voltage at 5V. The total number of pins is 14. This product should not be used at temperatures above 125°C. For this device to operate, it cannot be lower than -55°C. This supply voltage is employed under 5.5V. It is used at a higher voltage than 4.5V.

CD74ACT164ME4 Features


With 14 pins
Operate supply voltage at 5V
It supplies 5V power

CD74ACT164ME4 Applications


There are a lot of Texas Instruments CD74ACT164ME4 Shift Registers applications.

  • ROM Chips
  • Data Processors
  • Sequence generator
  • Output expansion
  • Pseudo Random Pattern Generator
  • 7-segment display control
  • Interconnectors
  • Cache memory in CPU
  • Serial-to-parallel data conversion
  • Remote control holding register
999
In-stock
 Get Quote
SNJ54HC195FK
815-SNJ54HC195FK
 Texas Instruments

SNJ54HC195FK Overview


20 is the total number of terminations on the chip. Presented in a case of Rail/Tube. The part operates at 5V voltage. A total of 1 elements are present on this part. 20 pins are available on the device. As a general recommendation, mounting by Surface Mount is recommended. This electronic component is classified as HC/UH. It is noted that this chip uses an operating supply voltage of 5V. Please take note of the following additional aspects of this section: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. A total of 4 bits are present on the IC chip. The total number of pins is 20. Using it below 125°C is recommended. It should not be less than -55°C when operating this device. A voltage of this type is employed under 6V. It is necessary to use a voltage that is higher than 2V to provide this supply.

SNJ54HC195FK Features


With 20 pins
Operate supply voltage at 5V

SNJ54HC195FK Applications


There are a lot of Texas Instruments SNJ54HC195FK Shift Registers applications.

  • Parallel data
  • Output expansion
  • 7-segment display control
  • Serial-to-parallel data conversion
  • Cache memory in CPU
  • LED matrix control
  • Data Format Converters
  • 8-bit data storage
  • Counter
  • Serial to parallel converter
999
In-stock
 Get Quote
CD74HC595SM96G4
815-CD74HC595SM96G4
 Texas Instruments

CD74HC595SM96G4 Overview


There is an embedded device in the package SSOP. 16 is the sum of the number of terminations in the chip. There is a Tape and Reel case containing it. 5V is the operating supply voltage of the part. 1 elements are present in this part. There are 16 pins on the device. Surface Mount is recommended for mounting. Electronic components fall under the category of HC/UH. In terms of supply voltage, this chip operates within the range of 5V. IC chips contain a total of 8 bits. There are a total of 16 pins on it. A temperature below 125°C is recommended for its use. In order to operate the device, the value should not fall below -55°C. 6V is the supply voltage used. This supply voltage is employed higher than 2V. It is necessary to operate 9 output lines of the system.

CD74HC595SM96G4 Features


With 16 pins
Operate supply voltage at 5V
With 9 output lines

CD74HC595SM96G4 Applications


There are a lot of Texas Instruments CD74HC595SM96G4 Shift Registers applications.

  • store data in digital form
  • Flash Memory
  • Counter
  • temporary data storage
  • Dual-rank shift, hold, and bus applications
  • 8-bit data storage
  • Interconnectors
  • Serial to parallel converter
  • Serial-to-parallel data conversion
  • Output expansion
999
In-stock
 Get Quote
SN74LS599N
815-SN74LS599N
 Texas Instruments

SN74LS599N Overview


This device can be found embedded within the package PDIP. 16 is the number of terminations on the chip. Its operating supply voltage is rated at 5V. An electronic component is included in the LS. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER. For this part, the minimum supply voltage (Vsup) should not be less than 4.75V. It is recommended that the maximum supply voltage for this part is not greater than 5.25V (Vsup). The total number of IC chip bits is 8. This board has 16 pins in total. It should only be used at temperatures no greater than 70°C.

SN74LS599N Features



SN74LS599N Applications


There are a lot of Texas Instruments SN74LS599N Shift Registers applications.

  • Data Processors
  • LED matrix control
  • Serial-to-parallel data conversion
  • Remote control holding register
  • Data Format Converters
  • store data in digital form
  • Serial to parallel converter
  • Pattern Recognizers
  • 8-bit data storage
  • Flash Memory
999
In-stock
 Get Quote
5962-8671701FA
815-5962-8671701FA
 Texas Instruments

5962-8671701FA Overview


This chip has a total termination count of 16. It is used to pack in Rail/Tube case. The part's operating supply voltage is rated 5V. This part has 1 elements. There are 16 pins on the device. It is recommended to mount by Surface Mount. In the LS series, the electronic component belongs. The operating supply voltage of this chip is noted to be within the range 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. Devices with voltage delivery capabilities of 5V are available. There are 8 bits in the IC chip. In total, there are 16 pins on it. This product should not be used at temperatures above 125°C. For this device to work, it should not go below -55°C. We use this supply voltage under 5.5V. It is important to note that this supply voltage is higher than 4.5V.

5962-8671701FA Features


With 16 pins
Operate supply voltage at 5V
It supplies 5V power

5962-8671701FA Applications


There are a lot of Texas Instruments 5962-8671701FA Shift Registers applications.

  • Parallel data
  • data transfer
  • Cache memory in CPU
  • temporary data storage
  • store data in digital form
  • Parallel to serial converter
  • Dual-rank shift, hold, and bus applications
  • Generate time delay toward digital circuits
  • 7-segment display control
  • Pattern Recognizers
999
In-stock
 Get Quote
V62/04690-01XE
815-V62/04690-01XE
 Texas Instruments

V62/04690-01XE Overview


There is a SOIC package embedded with the device. A total of 16 terminations can be found on the chip. A voltage of 5V is specified for the part's operating supply. On this part, there are 1 elements. In this device, there are 16 pins. Surface Mount is recommended for mounting. Electronic components fall under the category of HC/UH. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional elements are important to note: SISO OPERATION ALSO AVAILABLE. In this device, there are 9 input lines. It has a total of 8 pins. The pin count is 16. At temperatures below 85°C, it is recommended for use. For this device to work, it should not go below -40°C. A voltage of this type is employed under 6V. There is a voltage applied to the supply that is greater than 2V. In order to package the part properly, TR is used.

V62/04690-01XE Features


With 16 pins
Operate supply voltage at 5V
Packing Method : TR

V62/04690-01XE Applications


There are a lot of Texas Instruments V62/04690-01XE Shift Registers applications.

  • Parallel to serial converter
  • store data in digital form
  • Sequence generator
  • temporary data storage
  • Delay Line
  • Generate time delay toward digital circuits
  • Serial to parallel converter
  • Interconnectors
  • Cache memory in CPU
  • Parallel data
999
In-stock
 Get Quote
SN74LS91N
815-SN74LS91N
 Texas Instruments

SN74LS91N Overview


As a result, PDIP package contains the embedded device. 14 is the number of terminations on the chip. A voltage of 5V is specified for the part's operating supply. Electronic components are categorized as LS. This part should have a minimum supply voltage (Vsup) of at least 4.75V. The device is capable of delivering voltage at 5V. In this part, the maximum supply voltage (Vsup) should not exceed 5.25V. It has a total of 8 pins. Use it only at temperatures below 70°C.

SN74LS91N Features


It supplies 5V power

SN74LS91N Applications


There are a lot of Texas Instruments SN74LS91N Shift Registers applications.

  • Data Processors
  • Data Format Converters
  • Remote control holding register
  • Remote control holding register
  • Serial-to-parallel data conversion
  • 7-segment display control
  • 8-bit data storage
  • data transfer
  • Output expansion
  • Serial to parallel converter
999
In-stock
 Get Quote
SN74HC165PWRE4
815-SN74HC165PWRE4
 Texas Instruments

SN74HC165PWRE4 Overview


As a result, TSSOP package contains the embedded device. Chip terminations add up to 16. It is used to pack in Tape and Reel case. A voltage of 5V is specified for the part's operating supply. There are 1 elements on this part. In this device, there are 16 pins. As a general recommendation, mounting by Surface Mount is recommended. Electronic components are categorized as HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. In this device, there are 9 input lines. There are 8 bits in the IC chip. The pin count is 16. The product should be used at temperatures below 125°C. This device should not be operated with a value lower than -40°C. We use this supply voltage under 6V. There is a voltage applied to the supply that is greater than 2V. The subcategory in which it falls belongs to is Shift Registers.

SN74HC165PWRE4 Features


With 16 pins
Operate supply voltage at 5V

SN74HC165PWRE4 Applications


There are a lot of Texas Instruments SN74HC165PWRE4 Shift Registers applications.

  • Remote control holding register
  • Interconnectors
  • Dual-rank shift, hold, and bus applications
  • Pseudo Random Pattern Generator
  • Parallel data
  • Serial to parallel converter
  • Generate time delay toward digital circuits
  • store data in digital form
  • Flash Memory
  • Data Processors
999
In-stock
 Get Quote
SN74LV164ADRE4
815-SN74LV164ADRE4
 Texas Instruments

SN74LV164ADRE4 Overview


This device can be found embedded within the package SOIC. 14 is the number of terminations on the chip. A Tape and Reel case is used to pack it. There is 2.5V operating supply voltage listed on the part. A total of 1 elements can be found on this part. In this device, there are 14 pins. Mounting by Surface Mount is recommended. An electronic component is included in the LV/LV-A/LVX/H. As noted, this chip operates within the range of 5V. There are also the following additional considerations in this section: AND-GATED SERIAL INPUTS (A AND B). As far as the device is concerned, there are 2 input lines available. There is a capability to deliver voltage at 3.3V. There are a total of 14 pins on it. At temperatures below 85°C, it is recommended for use. In order for this device to function, the value should not be less than -40°C. A voltage of 5.5V is employed as the supply voltage. A voltage higher than 2V is used as a supply voltage.

SN74LV164ADRE4 Features


With 14 pins
Operate supply voltage at 5V
It supplies 3.3V power

SN74LV164ADRE4 Applications


There are a lot of Texas Instruments SN74LV164ADRE4 Shift Registers applications.

  • 7-segment display control
  • Counter
  • store data in digital form
  • Dual-rank shift, hold, and bus applications
  • Parallel data
  • Output expansion
  • Serial-to-parallel data conversion
  • Cache memory in CPU
  • temporary data storage
  • Data Format Converters
999
In-stock
 Get Quote
M38510/30609B2A
815-M38510/30609B2A
 Texas Instruments

M38510/30609B2A Overview


20 is the sum of the number of terminations in the chip. Presented in a case of Rail/Tube. The part operates at 5V voltage. The part consists of 1 elements. In this device, there are 20 pins. Mounting by Surface Mount is recommended. In the LS series, the electronic component belongs. 5V is noted as the operating supply voltage of this chip. A voltage of 5V is possible with this device. It has 8 bits in total. The pin count is 20. It is recommended that it be used at temperatures below 125°C. It should not be less than -55°C when operating this device. Under 5.5V, this voltage is employed. The supply voltage is higher than 4.5V.

M38510/30609B2A Features


With 20 pins
Operate supply voltage at 5V
It supplies 5V power

M38510/30609B2A Applications


There are a lot of Texas Instruments M38510/30609B2A Shift Registers applications.

  • Pseudo Random Pattern Generator
  • Remote control holding register
  • Dual-rank shift, hold, and bus applications
  • data manipulation
  • Data Format Converters
  • Cache memory in CPU
  • Output expansion
  • Parallel data
  • Data Processors
  • Generate time delay toward digital circuits
999
In-stock
 Get Quote
CD74HC194M96G4
815-CD74HC194M96G4
 Texas Instruments

CD74HC194M96G4 Overview


This device can be found embedded within the package SOIC. A total of 16 terminations can be found on the chip. It is packed in a case number Tape and Reel. 4.5V is the operating supply voltage of the part. On this part, there are 1 elements. In this device, there are 16 pins. Mounting by Surface Mount is recommended. Electronic components belong to the HC/UH group. It is noted that this chip uses an operating supply voltage of 5V. This section has the following additional features: HOLD MODE. As far as the device is concerned, there are 6 input lines available. It has a total of zero pins. It is recommended that it be used at temperatures below 125°C. In order to operate the device, the value should not fall below -55°C. 6V is the supply voltage used. This supply voltage is employed higher than 2V.

CD74HC194M96G4 Features


With 16 pins
Operate supply voltage at 5V

CD74HC194M96G4 Applications


There are a lot of Texas Instruments CD74HC194M96G4 Shift Registers applications.

  • Pseudo Random Pattern Generator
  • Counter
  • store data in digital form
  • 7-segment display control
  • Pulse Extenders
  • ROM Chips
  • Data Processors
  • Interconnectors
  • Serial to parallel converter
  • Parallel data
999
In-stock
 Get Quote
CD74HC194MG4
815-CD74HC194MG4
 Texas Instruments

CD74HC194MG4 Overview


There is an embedded device in the package SOIC. There are 16 terminations on the chip. The part operates at 4.5V voltage. On this part, there are 1 elements. 16 pins are present on the device. The mounting method should be Surface Mount. Electronic components belong to the HC/UH group. It's noted that the chip's operating supply voltage is in the range 5V. Please take note of the following additional aspects of this section: HOLD MODE. A device with 6 input lines is available. It has a total of 16 pins. A temperature below 125°C is recommended for its use. For this device to operate, it cannot be lower than -55°C. It is employed under the condition of 6V. It is necessary to use a voltage that is higher than 2V to provide this supply.

CD74HC194MG4 Features


With 16 pins
Operate supply voltage at 5V

CD74HC194MG4 Applications


There are a lot of Texas Instruments CD74HC194MG4 Shift Registers applications.

  • data manipulation
  • temporary data storage
  • Pseudo Random Pattern Generator
  • store data in digital form
  • Data Format Converters
  • Output expansion
  • Cache memory in CPU
  • Data manipulation
  • Flash Memory
  • 8-bit data storage
999
In-stock
 Get Quote
CD54HCT166F3A
815-CD54HCT166F3A
 Texas Instruments

CD54HCT166F3A Overview


CDIP is a package containing the embedded device. 16 is the total number of terminations on the chip. A Rail/Tube case holds it. 5V is the operating supply voltage of the part. A total of 1 elements are present on this part. 16 pins are available on the device. It is recommended to mount by Through Hole. The electronic component belongs to the HCT. A range of 5V is noted as the operating supply voltage of this chip. Taking note of the following additional details: SISO OPERATION ALSO AVAILABLE. A voltage of 5V is possible with this device. The total number of IC chip bits is 8. In total, there are 16 pins on it. Under 125°C, it is recommended that it be used. For this device to operate, it cannot be lower than -55°C. A voltage of this type is employed under 5.5V. This supply voltage is employed higher than 4.5V. A quiescent current of 8μA is used.

CD54HCT166F3A Features


With 16 pins
Operate supply voltage at 5V
It supplies 5V power
Quiescent Current at 8μA

CD54HCT166F3A Applications


There are a lot of Texas Instruments CD54HCT166F3A Shift Registers applications.

  • Pseudo Random Pattern Generator
  • Delay Line
  • Flash Memory
  • Output expansion
  • Serial-to-parallel data conversion
  • Cache memory in CPU
  • 8-bit data storage
  • Remote control holding register
  • Remote control holding register
  • Data manipulation
999
In-stock
 Get Quote
CD74HC166M96G4
815-CD74HC166M96G4
 Texas Instruments

CD74HC166M96G4 Overview


Embedded in a package of type SOIC, the device is available for use. 16 is the sum of the number of terminations in the chip. Its operating supply voltage is rated at 4.5V. 1 elements make up this part. It has 16 pins. Surface Mount is recommended for mounting. In this case, the electronic component belongs to the HC/UH. It is noted that the operating supply voltage of this chip falls within the range 5V. This section has the following additional features: SISO OPERATION ALSO AVAILABLE. The device has 9 input lines. The total number of IC chip bits is 8. In total, there are 16 pins on it. At temperatures below 125°C, it is recommended for use. This device should not be operated below -55°C. A voltage of 6V is employed as the supply voltage. This supply voltage is employed higher than 2V. Shift Registers is its subcategory.

CD74HC166M96G4 Features


With 16 pins
Operate supply voltage at 5V

CD74HC166M96G4 Applications


There are a lot of Texas Instruments CD74HC166M96G4 Shift Registers applications.

  • store data in digital form
  • Data Format Converters
  • Generate time delay toward digital circuits
  • Remote control holding register
  • Pseudo Random Pattern Generator
  • Remote control holding register
  • Delay Line
  • temporary data storage
  • LED matrix control
  • Interconnectors
999
In-stock
 Get Quote
SN74AHC594NE4
815-SN74AHC594NE4
 Texas Instruments

SN74AHC594NE4 Overview


PDIP is the package in which the device is embedded. Taking the total number of terminations on the chip and adding them up, we get 16. This part has an operating supply voltage of 3.3V. A total of 1 elements are present on this part. 16 pins are present on the device. As a general recommendation, mounting by Through Hole is recommended. There is an electronic component in the AHC/VHC/H/U/V. As noted, this chip operates within the range of 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. There is a capability to deliver voltage at 2/6V. A total of 8 bits are present on the IC chip. 16 pins are on it. Under 125°C, it is recommended that it be used. In order to operate the device, the value should not fall below -40°C. It is employed under the condition of 5.5V. It is necessary to use a voltage that is higher than 2V to provide this supply. There are 9 output lines to operate.

SN74AHC594NE4 Features


With 16 pins
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines

SN74AHC594NE4 Applications


There are a lot of Texas Instruments SN74AHC594NE4 Shift Registers applications.

  • Pseudo Random Pattern Generator
  • 8-bit data storage
  • Data Processors
  • 7-segment display control
  • Parallel data
  • Flash Memory
  • Counter
  • Remote control holding register
  • Output expansion
  • Interconnectors
999
In-stock
 Get Quote
CD74HC166MTG4
815-CD74HC166MTG4
 Texas Instruments

CD74HC166MTG4 Overview


Embedded in a package of type SOIC, the device is available for use. There are 16 terminations on the chip. It is packed in a case number Tape & Reel (TR). 4.5V is the part's operating supply voltage. There are 1 elements on this part. It is equipped with a pin count of 16. Using Surface Mount as a mount point is recommended. This electronic component is classified as HC/UH. It is noted that this chip uses an operating supply voltage of 5V. Additionally, this section contains the following: SISO OPERATION ALSO AVAILABLE. In this device, there are 9 input lines. IC chip bits total 8. The total number of pins is 16. Under 125°C, it is recommended that it be used. This device should not be operated with a value lower than -55°C. A voltage of 6V is employed as the supply voltage. It is important to note that this supply voltage is higher than 2V. It belongs to the subcategory of Shift Registers.

CD74HC166MTG4 Features


With 16 pins
Operate supply voltage at 5V

CD74HC166MTG4 Applications


There are a lot of Texas Instruments CD74HC166MTG4 Shift Registers applications.

  • Pulse Extenders
  • Parallel to serial converter
  • Remote control holding register
  • Data manipulation
  • Sequence generator
  • temporary data storage
  • data transfer
  • 8-bit data storage
  • Serial-to-parallel data conversion
  • Output expansion
999
In-stock
 Get Quote
8302102SA
815-8302102SA
 Texas Instruments

8302102SA Overview


20 is the number of terminations on the chip. The case Rail/Tube contains it. There is 5V operating supply voltage listed on the part. This part has 1 elements. 20 pins are provided on the device. Mounting by Surface Mount is recommended. In the ALS series, the electronic component belongs. According to the specification, this chip's operating supply voltage falls within the range of 5V. This section has the following additional features: COMMON I/O PINS; GATED OUTPUT ENABLE INPUT. Voltage can be delivered at 5V by the device. A total of 8 bits are present on an IC chip. 20 pins are on it. Using it below 125°C is recommended. Operation of this device requires a value greater than -55°C. A voltage of 5.5V is employed as the supply voltage. It is used at a voltage greater than 4.5V.

8302102SA Features


With 20 pins
Operate supply voltage at 5V
It supplies 5V power

8302102SA Applications


There are a lot of Texas Instruments 8302102SA Shift Registers applications.

  • data transfer
  • Data manipulation
  • store data in digital form
  • Counter
  • Parallel data
  • temporary data storage
  • Cache memory in CPU
  • Sequence generator
  • data manipulation
  • Serial-to-parallel data conversion
999
In-stock
 Get Quote
SN74ALS164ANE4
815-SN74ALS164ANE4
 Texas Instruments

SN74ALS164ANE4 Overview


PDIP is a package containing the embedded device. This chip has a total termination count of 14. The Rail/Tube case contains it. 5V is the part's operating supply voltage. 1 elements are present in this part. 14 pins are available on the device. Mounting by Through Hole is recommended. In this case, the electronic component belongs to the ALS. It is noted that the operating supply voltage of this chip falls within the range 5V. Please take note of the following additional aspects of this section: AND-GATED SERIAL (A AND B) INPUTS. The device has 2 input lines. There is a capability to deliver voltage at 5V. 14 pins are present on it. It is recommended that it be used at temperatures below 70°C. In order to operate the device, the value should not fall below 0°C. Under 5.5V, this supply voltage is employed. A voltage higher than 4.5V is used as a supply voltage.

SN74ALS164ANE4 Features


With 14 pins
Operate supply voltage at 5V
It supplies 5V power

SN74ALS164ANE4 Applications


There are a lot of Texas Instruments SN74ALS164ANE4 Shift Registers applications.

  • Serial-to-parallel data conversion
  • data transfer
  • Parallel data
  • Parallel to serial converter
  • Cache memory in CPU
  • Counter
  • Sequence generator
  • ROM Chips
  • Pseudo Random Pattern Generator
  • Data Processors
999
In-stock
 Get Quote
CD4014BPWE4
815-CD4014BPWE4
 Texas Instruments

CD4014BPWE4 Overview


There is an embedded device in the package TSSOP. 16 is the total number of terminations on the chip. This item is packed in case Rail/Tube. The part operates at 5V voltage. The device is equipped with 16 pins. Mounting by Surface Mount is recommended. It's noted that the chip's operating supply voltage is in the range 15V. The following additional aspects of this section are worth noting: OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO. This device has 9 input lines available. IC chip bits total 8. This board has 16 pins in total. The product should be used at temperatures below 125°C. In order for this device to function, the value should not be less than -55°C. 18V is the supply voltage used. This supply voltage is employed higher than 3V. A total of 3 output lines are available for operation. The subcategory in which it falls belongs to is Shift Registers. There are 1 circuits in this device.

CD4014BPWE4 Features


With 16 pins
Operate supply voltage at 15V
With 3 output lines

CD4014BPWE4 Applications


There are a lot of Texas Instruments CD4014BPWE4 Shift Registers applications.

  • Parallel to serial converter
  • LED matrix control
  • Generate time delay toward digital circuits
  • Delay Line
  • data transfer
  • 7-segment display control
  • Pattern Recognizers
  • Flash Memory
  • ROM Chips
  • temporary data storage
999
In-stock
 Get Quote
CD74HC595DWE4
815-CD74HC595DWE4
 Texas Instruments

CD74HC595DWE4 Overview


There is a SOIC package embedded with the device. There are 16 terminations on the chip. A Rail/Tube case is used to pack it. Voltage rating of the part is 5V. The part consists of 1 elements. It is equipped with a pin count of 16. Mounting by Surface Mount is recommended. There is an electronic component in the HC/UH. According to the specification, this chip's operating supply voltage falls within the range of 5V. There are 8 bits in the IC chip. The pin count is 16. Using it below 125°C is recommended. Ideally, it should not fall below -55°C. It is employed under the condition of 6V. Voltages higher than 2V are used for this supply. 9 output lines are available for operation.

CD74HC595DWE4 Features


With 16 pins
Operate supply voltage at 5V
With 9 output lines

CD74HC595DWE4 Applications


There are a lot of Texas Instruments CD74HC595DWE4 Shift Registers applications.

  • Pattern Recognizers
  • Data Processors
  • Counter
  • Remote control holding register
  • Pseudo Random Pattern Generator
  • Generate time delay toward digital circuits
  • Pulse Extenders
  • Flash Memory
  • ROM Chips
  • Interconnectors
999
In-stock
 Get Quote
SN74HC595NSRG4
815-SN74HC595NSRG4
 Texas Instruments

SN74HC595NSRG4 Overview


There is an embedded device in the package SOP. 16 is the number of terminations on the chip. There is a Tape and Reel case containing it. 5V is the part's operating supply voltage. 1 elements make up this part. It is equipped with a pin count of 16. It is recommended to mount by Surface Mount. Electronic components are categorized as HC/UH. It is noted that this chip uses an operating supply voltage of 5V. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. A total of 8 bits are present on an IC chip. In total, it has 16 pins. Temperatures below 85°C are recommended for use. Operation of this device requires a value greater than -40°C. It is used under the 6V supply voltage. It is necessary to use a voltage that is higher than 2V to provide this supply. A total of 9 output lines need to be operated.

SN74HC595NSRG4 Features


With 16 pins
Operate supply voltage at 5V
With 9 output lines

SN74HC595NSRG4 Applications


There are a lot of Texas Instruments SN74HC595NSRG4 Shift Registers applications.

  • Data Format Converters
  • Remote control holding register
  • Interconnectors
  • Cache memory in CPU
  • Remote control holding register
  • Pattern Recognizers
  • data transfer
  • data manipulation
  • Parallel data
  • Output expansion
999
In-stock
 Get Quote
CD54ACT299F3A
815-CD54ACT299F3A
 Texas Instruments

CD54ACT299F3A Overview


CDIP is a package containing the embedded device. 20 is the total number of terminations on the chip. This part has an operating supply voltage of 5V. A total of 1 elements are present on this part. There are 20 pins on the device. The recommended mounting method is Through Hole. It is a component of the ACT. 5V is noted as the operating supply voltage of this chip. Taking note of the following additional details: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. The device is capable of delivering voltage at 5V. The total number of IC chip bits is 8. 20 pins are on it. Temperatures below 125°C are recommended for use. Operation of this device requires a value greater than -55°C. This supply voltage is employed under 5.5V. There is a voltage applied to the supply that is greater than 4.5V. It runs on a quiescent current of 8μA. To package the part, TUBE is used.

CD54ACT299F3A Features


With 20 pins
Operate supply voltage at 5V
It supplies 5V power
Quiescent Current at 8μA
Packing Method : TUBE

CD54ACT299F3A Applications


There are a lot of Texas Instruments CD54ACT299F3A Shift Registers applications.

  • Flash Memory
  • Remote control holding register
  • Interconnectors
  • Cache memory in CPU
  • Dual-rank shift, hold, and bus applications
  • store data in digital form
  • Data Format Converters
  • Pulse Extenders
  • Sequence generator
  • 8-bit data storage
999
In-stock
 Get Quote

Please send RFQ , we will respond immediately.