My CartGas Sensors(4391)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Texas Instruments | SN74ALS323DWE4 OverviewIn package 20-SOIC (0.295, 7.50mm Width), there is an embedded device. Taking the total number of terminations on the chip and adding them up, we get 20. There is a Tube case containing it. A voltage of 5V is specified for the part's operating supply. A total of 1 elements can be found on this part. The device is equipped with 20 pins. It is recommended that the mount should be done by Surface Mount. It is a component of the ALS. In Surface Mount, this component is mounted. There is a range of temperatures 0°C~70°C for operation. There is a votage of 4.5V~5.5V provided with it. This electrical component belongs to the 74ALS series. The 74ALS323 family can be used to find similar parts. A range of 5V is noted as the operating supply voltage of this chip. Additional aspects of this section are as follows: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. The device has a total of 10 input lines. A voltage of 5V can be delivered by it. SN74ALS323DWE4 FeaturesWith 20 pins Mounted in Surface Mount type. Based on 74ALS323 family Operate supply voltage at 5V It supplies 5V power SN74ALS323DWE4 ApplicationsThere are a lot of Texas Instruments SN74ALS323DWE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC194NSRE4 OverviewThere is a 16-SOIC (0.209, 5.30mm Width) package embedded with the device. 16 is the total number of terminations on the chip. A Tape & Reel (TR) case is used to pack it. There is 4.5V operating supply voltage listed on the part. This part has 1 elements. It is a component of the HC/UH. As you can see, this component is mounted in the way of Surface Mount. There is a range of temperatures -55°C~125°C for operation. During operation, the voltage is within the range of 2V~6V. This electrical component belongs to the 74HC series. You can search for similar parts based on the 74HC194 family. The following additional elements are important to note: HOLD MODE. For this part, Vsup should not be less than 2V. A voltage of 2/6V is possible with this device. It should not exceed 6V in terms of the supply voltage (Vsup). The subcategory of this item is Shift Registers. CD74HC194NSRE4 FeaturesMounted in Surface Mount type. Based on 74HC194 family It supplies 2/6V power CD74HC194NSRE4 ApplicationsThere are a lot of Texas Instruments CD74HC194NSRE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CY29FCT818CTSOC Overview24-SOIC (0.295, 7.50mm Width) is a package containing the embedded device. 24 is the number of terminations on the chip. Presented in a case of Tube. This part has an operating supply voltage of 5V. 1 elements are present in this part. There are 24 pins on the device. Surface Mount is recommended for mounting. An electronic component is included in the FCT. In Surface Mount, this component is mounted. There is a temperature range of -40°C~85°C. Votage within the range of 4.75V~5.25V is supplied. Similar parts can be found using the 29FCT family. Similar parts can be found using the CY29FCT818 family. It is noted that the operating supply voltage of this chip falls within the range 5V. CY29FCT818CTSOC FeaturesWith 24 pins Mounted in Surface Mount type. Based on CY29FCT818 family Operate supply voltage at 5V CY29FCT818CTSOC ApplicationsThere are a lot of Texas Instruments CY29FCT818CTSOC Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD74HC194MT OverviewThere is a 16-SOIC (0.154, 3.90mm Width) package embedded with the device. The number of the chip's terminations sums up to 16. This item is packed in case Tape & Reel (TR). The part operates at 4.5V voltage. A total of 1 elements can be found on this part. Devices with 16 pins are available. It is recommended that the mount should be done by Surface Mount. There is an electronic component in the HC/UH. Mounted in the same way as Surface Mount. -55°C~125°C is the range of operating temperatures for the device. It is supplied with voltage within 2V~6V. In this case, the electrical component belongs to the series 74HC. With 74HC194 family search, you can find similar parts. A range of 5V is noted as the operating supply voltage of this chip. There are also the following additional considerations in this section: HOLD MODE. For this part, the minimum supply voltage (Vsup) should not be less than 2V. The device has a total of 6 input lines. It should not exceed 6V in terms of the supply voltage (Vsup). The device runs its frequency at 60MHz. CD74HC194MT FeaturesWith 16 pins Mounted in Surface Mount type. Based on 74HC194 family Operate supply voltage at 5V CD74HC194MT ApplicationsThere are a lot of Texas Instruments CD74HC194MT Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CY29FCT520ATPC Overview24-DIP (0.300, 7.62mm) is a package containing the embedded device. 24 is the sum of the number of terminations in the chip. This item is packed in case Tube. 5V is the part's operating supply voltage. On this part, there are 1 elements. There are 24 pins on the device. Using Through Hole as a mount point is recommended. As you can see, this component is mounted in the way of Through Hole. There is a range of operating temperatures -40°C~85°C. It is supplied with voltage within 4.75V~5.5V. This electrical component belongs to the 29FCT series. If you use the CY29FCT520 family, you can find parts that are similar. In terms of supply voltage, this chip operates within the range of 5V. A voltage of 5V can be delivered by it. In terms of its subcategory, it belongs to DSP Peripherals. This part has 8 outputs built in to it. CY29FCT520ATPC FeaturesWith 24 pins Mounted in Through Hole type. Based on CY29FCT520 family Operate supply voltage at 5V It supplies 5V power CY29FCT520ATPC ApplicationsThere are a lot of Texas Instruments CY29FCT520ATPC Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AHC595NSRE4 Overview16-SOIC (0.209, 5.30mm Width) is the package in which the device is embedded. This chip has a total termination count of 16. It is packed in a case number Tape & Reel (TR). The part operates at 3.3V voltage. 16 pins are located on the device. As a general recommendation, mounting by Surface Mount is recommended. Electronic components fall under the category of AHC/VHC/H/U/V. The component is positioned in the way of Surface Mount. There is a temperature range of -40°C~85°C. Votage within 2V~5.5V is supplied. In this case, the electrical component belongs to the series 74AHC. You can search for similar parts based on the 74AHC595 family. It is noted that this chip uses an operating supply voltage of 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. There must be a minimum supply voltage (Vsup) of 2V for this part. In this device, there are 1 input lines. It is necessary to operate 9 output lines of the system. SN74AHC595NSRE4 FeaturesWith 16 pins Mounted in Surface Mount type. Based on 74AHC595 family Operate supply voltage at 5V With 9 output lines SN74AHC595NSRE4 ApplicationsThere are a lot of Texas Instruments SN74AHC595NSRE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LS594NSRE4 OverviewThere is an embedded device in the package 16-SOIC (0.209, 5.30mm Width). Chip terminations add up to 16. It is packed in a case number Tape & Reel (TR). Parts with a 5V operating supply voltage are specified. 16 pins are available on the device. It is recommended that the mount should be done by Surface Mount. In this case, the electronic component belongs to the LS. There is a component mounted in the way of Surface Mount on this board. It is important to note that the operating temperature range is 0°C~70°C. There is a votage of 4.75V~5.25V provided with it. The 74LS series contains this electrical component. You can search for similar parts based on the 74LS594 family. It is noted that the operating supply voltage of this chip falls within the range 5V. As far as the device is concerned, there are 1 input lines available. A voltage of 5V is possible with this device. There are 9 output lines to operate. SN74LS594NSRE4 FeaturesWith 16 pins Mounted in Surface Mount type. Based on 74LS594 family Operate supply voltage at 5V It supplies 5V power With 9 output lines SN74LS594NSRE4 ApplicationsThere are a lot of Texas Instruments SN74LS594NSRE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ALS870DW OverviewThere is an embedded device in the package 24-SOIC (0.295, 7.50mm Width). It sums up to 24 where the chip's terminations add up. It is used to pack in Tube case. Its operating supply voltage is rated at 5V. The part consists of 2 elements. The device is equipped with 24 pins. Surface Mount is recommended for mounting. Its mounting method is Surface Mount. 0°C~70°C is the range of operating temperatures for the device. There is a voltage supply within 4.5V~5.5V. In this case, the electrical component belongs to the series 74ALS. A 74ALS870 family can be used to search for similar parts. The following additional aspects of this section are worth noting: DUAL MEMORY FOR MULTIBUS ARCHITECTURE. In this part, the maximum supply voltage (Vsup) should not exceed 5.5V. Other Memory ICs is its subcategory. SN74ALS870DW FeaturesWith 24 pins Mounted in Surface Mount type. Based on 74ALS870 family SN74ALS870DW ApplicationsThere are a lot of Texas Instruments SN74ALS870DW Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CY29FCT818CTSOCE4 Overview24-SOIC (0.295, 7.50mm Width) is a package containing the embedded device. A total of 24 terminations can be found on the chip. A Tube case holds it. There is 5V operating supply voltage listed on the part. It is a part that has 1 elements on it. There are 24 pins on the device. It is recommended to mount by Surface Mount in order to get the best results. In the FCT series, the electronic component belongs. Surface Mount is the way in which this component is mounted. There is a range of operating temperatures -40°C~85°C. Votage within the range of 4.75V~5.25V is supplied. This electrical component belongs to the 29FCT series. Search for similar parts based on the CY29FCT818 family. The operating supply voltage of this chip is noted to be within the range 5V. CY29FCT818CTSOCE4 FeaturesWith 24 pins Mounted in Surface Mount type. Based on CY29FCT818 family Operate supply voltage at 5V CY29FCT818CTSOCE4 ApplicationsThere are a lot of Texas Instruments CY29FCT818CTSOCE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74ALS323DWR OverviewAs a result, 20-SOIC (0.295, 7.50mm Width) package contains the embedded device. There are 20 terminations on the chip. It is packed in a case number Tape & Reel (TR). Voltage rating of the part is 5V. A total of 1 elements can be found on this part. There are 20 pins on the device. Mounting by Surface Mount is recommended. Electronic components fall under the category of ALS. Surface Mount is the way in which this component is mounted. 0°C~70°C is the range of operating temperatures for the device. It is supplied with voltage within 4.5V~5.5V. Similar parts can be found using the 74ALS family. Similar parts can be found using the 74ALS323 family. It is noted that this chip uses an operating supply voltage of 5V. The following additional elements are important to note: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. In the device, there are 10 input lines. The device is capable of delivering voltage at 5V. SN74ALS323DWR FeaturesWith 20 pins Mounted in Surface Mount type. Based on 74ALS323 family Operate supply voltage at 5V It supplies 5V power SN74ALS323DWR ApplicationsThere are a lot of Texas Instruments SN74ALS323DWR Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74AS194N Overview16-DIP (0.300, 7.62mm) is a package containing the embedded device. This chip has a total termination count of 16. The case Tube contains it. Parts with a 5V operating supply voltage are specified. There are 1 elements on this part. The device is equipped with 16 pins. It is recommended to mount by Through Hole in order to get the best results. There is an electronic component in the AS. In Through Hole, this component is mounted. The operating temperature ranges 0°C~70°C. Votage is provided within 4.5V~5.5V. This electrical component belongs to the 74AS series. A 74AS194 family can be used to search for similar parts. It is noted that this chip uses an operating supply voltage of 5V. Taking note of the following additional details: HOLD MODE. In the device, there are 6 input lines. Its frequency is set to 80MHz. SN74AS194N FeaturesWith 16 pins Mounted in Through Hole type. Based on 74AS194 family Operate supply voltage at 5V SN74AS194N ApplicationsThere are a lot of Texas Instruments SN74AS194N Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LS595NSRE4 Overview16-SOIC (0.209, 5.30mm Width) is a package containing the embedded device. This chip has a total termination count of 16. A Tape & Reel (TR) case is used to pack it. This part has an operating supply voltage of 5V. Devices with 16 pins are available. The mounting method should be Surface Mount. This electronic component is classified as LS. This component is mounted in the way of Surface Mount. Operating temperatures are within the range of 0°C~70°C. Votage is supplied within 4.75V~5.25V. The 74LS series represents this electrical component. If you use the 74LS595 family, you can find parts that are similar. It's noted that the chip's operating supply voltage is in the range 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. As far as the device is concerned, there are 1 input lines available. A voltage of 5V can be delivered by it. Operation is available on only 9 output lines. SN74LS595NSRE4 FeaturesWith 16 pins Mounted in Surface Mount type. Based on 74LS595 family Operate supply voltage at 5V It supplies 5V power With 9 output lines SN74LS595NSRE4 ApplicationsThere are a lot of Texas Instruments SN74LS595NSRE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74F299NSR Overview20-SOIC (0.209, 5.30mm Width) package contains the device. Taking the total number of terminations on the chip and adding them up, we get 20. The case Tape & Reel (TR) contains it. Parts with a 5V operating supply voltage are specified. On this part, there are 1 elements. It has 20 pins. Mounting by Surface Mount is recommended. In the F/FAST series, the electronic component belongs. Surface Mount is the way in which this component is mounted. There is a temperature range of 0°C~70°C. The voltage supplied to it is within the range of 4.5V~5.5V. In the 74F series, this electrical component is found. You can search for similar parts based on the 74F299 family. As noted, this chip operates within the range of 5V. This device has 10 input lines available. Voltage can be delivered at 5V by the device. SN74F299NSR FeaturesWith 20 pins Mounted in Surface Mount type. Based on 74F299 family Operate supply voltage at 5V It supplies 5V power SN74F299NSR ApplicationsThere are a lot of Texas Instruments SN74F299NSR Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LS597NSR OverviewEmbedded in a package of type 16-SOIC (0.209, 5.30mm Width), the device is available for use. 16 is the number of terminations on the chip. It is packed in a case number Tape & Reel (TR). The part's operating supply voltage is rated 5V. 1 elements make up this part. It is equipped with a pin count of 16. The recommended mounting method is Surface Mount. An electronic component is included in the LS. Mounted in the same way as Surface Mount. There is a temperature range of 0°C~70°C. Votage is provided within 4.75V~5.25V. In this case, the electrical component belongs to the series 74LS. Based on the 74LS597 family, you can search for similar parts. It is noted that the operating supply voltage of this chip falls within the range 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. A device with 9 input lines is available. It can deliver voltage at 5V. SN74LS597NSR FeaturesWith 16 pins Mounted in Surface Mount type. Based on 74LS597 family Operate supply voltage at 5V It supplies 5V power SN74LS597NSR ApplicationsThere are a lot of Texas Instruments SN74LS597NSR Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV165APWG4 OverviewThere is a 16-TSSOP (0.173, 4.40mm Width) package embedded with the device. Taking the total number of terminations on the chip and adding them up, we get 16. Tube is the case in which it is packed. 2.5V is the part's operating supply voltage. There are 1 elements on this part. There are 16 pins on the device. Using Surface Mount as a mount point is recommended. In the LV/LV-A/LVX/H series, the electronic component belongs. The component is positioned in the way of Surface Mount. -40°C~125°C is the range of operating temperatures for the device. Voltages within 2V~5.5V are supplied to the device. The 74LV series contains this electrical component. If you use the 74LV165 family, you can find parts that are similar. There are also the following additional considerations in this section: SISO OPERATION ALSO AVAILABLE. This part should have a minimum supply voltage (Vsup) of at least 2V. Voltage can be delivered at 3.3V by the device. Ideally, the maximum supply voltage (Vsup) should not exceed 5.5V. The total number of IC chip bits is 8. In this device, there are a total of 8 circuits. A 2 output is present on the part. SN74LV165APWG4 FeaturesWith 16 pins Mounted in Surface Mount type. Based on 74LV165 family It supplies 3.3V power SN74LV165APWG4 ApplicationsThere are a lot of Texas Instruments SN74LV165APWG4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LS194ADR Overview16-SOIC (0.154, 3.90mm Width) is a package containing the embedded device. 16 is the sum of the number of terminations in the chip. Tape & Reel (TR) is the case in which it is packed. The part's operating supply voltage is rated 5V. There are 1 elements on this part. 16 pins are located on the device. Surface Mount is recommended for mounting. It is a component of the LS. There is a component mounted in the way of Surface Mount on this board. It is important to note that the operating temperature range is 0°C~70°C. There is a voltage supply within 4.75V~5.25V. In this case, the electrical component belongs to the series 74LS. You can search for similar parts based on the 74LS194 family. A range of 5V is noted as the operating supply voltage of this chip. There are also the following additional considerations in this section: HOLD MODE. There are 6 input lines available in the device. It can deliver voltage at 5V. SN74LS194ADR FeaturesWith 16 pins Mounted in Surface Mount type. Based on 74LS194 family Operate supply voltage at 5V It supplies 5V power SN74LS194ADR ApplicationsThere are a lot of Texas Instruments SN74LS194ADR Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74F299NSRE4 OverviewEmbedded in a package of type 20-SOIC (0.209, 5.30mm Width), the device is available for use. The number of the chip's terminations sums up to 20. This item is packed in case Tape & Reel (TR). A voltage of 5V is specified for the part's operating supply. A total of 1 elements are present on this part. 20 pins are present on the device. The mounting method should be Surface Mount. In the F/FAST series, the electronic component belongs. There is a component mounted in the way of Surface Mount on this board. There is a range of temperatures 0°C~70°C for operation. Voltages within 4.5V~5.5V are supplied to the device. This electrical component belongs to the 74F series. Based on the 74F299 family, you can search for similar parts. 5V is noted as the operating supply voltage of this chip. In the device, there are 10 input lines that are available for use. Devices with voltage delivery capabilities of 5V are available. SN74F299NSRE4 FeaturesWith 20 pins Mounted in Surface Mount type. Based on 74F299 family Operate supply voltage at 5V It supplies 5V power SN74F299NSRE4 ApplicationsThere are a lot of Texas Instruments SN74F299NSRE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LS598DW OverviewIn package 20-SOIC (0.295, 7.50mm Width), there is an embedded device. There are 20 terminations on the chip. A Tube case holds it. 5V is the part's operating supply voltage. On this part, there are 1 elements. 20 pins are located on the device. The mounting method should be Surface Mount. There is an electronic component in the LS. Surface Mount is the way in which this component is mounted. 0°C~70°C is the operating temperature range. There is a votage of 4.75V~5.25V provided with it. The 74LS series is associated with this electrical component. By using the 74LS598 family, you can find similar parts. It's noted that the chip's operating supply voltage is in the range 5V. This section has the following additional features: COMMON I/O PINS; MUXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT. In the device, there are 10 input lines. A voltage of 5V can be delivered by it. SN74LS598DW FeaturesWith 20 pins Mounted in Surface Mount type. Based on 74LS598 family Operate supply voltage at 5V It supplies 5V power SN74LS598DW ApplicationsThere are a lot of Texas Instruments SN74LS598DW Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74LV594ANSRE4 OverviewThis device can be found embedded within the package 16-SOIC (0.209, 5.30mm Width). A total of 16 terminations can be found on the chip. It is packed in a case number Tape & Reel (TR). Parts with a 2.5V operating supply voltage are specified. It has 16 pins. Surface Mount is recommended for mounting. The electronic component belongs to the LV/LV-A/LVX/H. Surface Mount is the way this component is mounted. There is a range of operating temperatures -40°C~85°C. The voltage supplied to it is within the range of 2V~5.5V. In this case, the electrical component belongs to the series 74LV. You can search for similar parts based on the 74LV594 family. 5V is noted as the operating supply voltage of this chip. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED. This part should have a minimum supply voltage (Vsup) of at least 2V. This device has 1 input lines available. A voltage of 3.3V is possible with this device. Operating on 9 output lines is possible. SN74LV594ANSRE4 FeaturesWith 16 pins Mounted in Surface Mount type. Based on 74LV594 family Operate supply voltage at 5V It supplies 3.3V power With 9 output lines SN74LV594ANSRE4 ApplicationsThere are a lot of Texas Instruments SN74LV594ANSRE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | SY10E141JY-TR OverviewThere is an embedded device in the package 28-LCC (J-Lead). The Tape & Reel (TR) case contains it. There are 1 elements on this part. Devices with 28 pins are available. It is recommended to mount by Surface Mount in order to get the best results. In Surface Mount, this component is mounted. It is important to note that the operating temperature range is 0°C~85°C. There is a voltage supply within 4.2V~5.5V. In the 10E series, this electrical component is found. A 10E141 family can be used to search for similar parts. It is recommended that it be used at temperatures below 85°C. It should not be lower than 0°C to operate this device. SY10E141JY-TR FeaturesWith 28 pins Mounted in Surface Mount type. Based on 10E141 family SY10E141JY-TR ApplicationsThere are a lot of Microchip Technology SY10E141JY-TR Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | SY100E141JY Overview28-LCC (J-Lead) is the package in which the device is embedded. A Tube case holds it. 1 elements make up this part. In this device, there are 28 pins. Mounting by Surface Mount is recommended. This component is mounted in the way of Surface Mount. There is a range of operating temperatures 0°C~85°C. Voltages within 4.2V~5.5V are supplied to the device. The 100E series represents this electrical component. The 100E141 family can be used to find similar parts. The total number of IC chip bits is 8. This product should not be used at temperatures above 85°C. For this device to operate, it cannot be lower than 0°C. We use this supply voltage under -5.5V. It is used at a higher voltage than -4.2V. SY100E141JY FeaturesWith 28 pins Mounted in Surface Mount type. Based on 100E141 family SY100E141JY ApplicationsThere are a lot of Microchip Technology SY100E141JY Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD4034BPWR OverviewThere is an embedded device in the package 24-TSSOP (0.173, 4.40mm Width). A total of 24 terminations can be found on the chip. It is packed in a case number Tape & Reel (TR). 5V is the operating supply voltage of the part. On this part, there are 1 elements. 24 pins are located on the device. As a general recommendation, mounting by Surface Mount is recommended. There is a component mounted in the way of Surface Mount on this board. -55°C~125°C is the operating temperature range. Voltages within 3V~18V are supplied to the device. It is part of the 4000B series of electrical components. Similar parts can be found by searching for the CD4034 family. It's noted that the chip's operating supply voltage is in the range 15V. There are also the following additional considerations in this section: COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE. This part must have a minimum supply voltage (Vsup) of 3V. A device with 9 input lines is available. CD4034BPWR FeaturesWith 24 pins Mounted in Surface Mount type. Based on CD4034 family Operate supply voltage at 15V CD4034BPWR ApplicationsThere are a lot of Texas Instruments CD4034BPWR Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | SN74HC165QDREP OverviewThere is an embedded device in the package 16-SOIC (0.154, 3.90mm Width). 16 is the number of terminations on the chip. It is packed in a case number Tape & Reel (TR). Parts with a 5V operating supply voltage are specified. 1 elements are present in this part. It has 16 pins. The mounting method should be Surface Mount. It is a component of the HC/UH. Surface Mount is the way this component is mounted. It is important to note that the operating temperature range is -40°C~125°C. Votage within the range of 2V~6V is supplied. The 74HC series represents this electrical component. You can search for similar parts based on the 74HC165 family. A range of 5V is noted as the operating supply voltage of this chip. Additional aspects of this section include: CLOCK INHIBIT. There should be no voltage less than 2V at the minimum supply voltage (Vsup). In this device, there are 9 input lines. A voltage of 2/6V can be delivered by it. Vsup cannot exceed 6V for this part. SN74HC165QDREP FeaturesWith 16 pins Mounted in Surface Mount type. Based on 74HC165 family Operate supply voltage at 5V It supplies 2/6V power SN74HC165QDREP ApplicationsThere are a lot of Texas Instruments SN74HC165QDREP Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | SY100E241JZ TR OverviewThere is a 28-LCC (J-Lead) package embedded with the device. Presented in a case of Tape & Reel (TR). 1 elements are present in this part. There is a component mounted in the way of Surface Mount on this board. A temperature range of 0°C~85°C is used for operation. Votage within the range of 4.2V~5.5V is supplied. 100E is the series number of this electrical component. The 100E241 family can be used to find similar parts. SY100E241JZ TR FeaturesMounted in Surface Mount type. Based on 100E241 family SY100E241JZ TR ApplicationsThere are a lot of Microchip Technology SY100E241JZ TR Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD4015BME4 OverviewThere is an embedded device in the package 16-SOIC (0.154, 3.90mm Width). 16 is the sum of the number of terminations in the chip. The case Tube contains it. This part has an operating supply voltage of 5V. A total of 2 elements can be found on this part. 16 pins are present on the device. The mounting method should be Surface Mount. In Surface Mount, this component is mounted. A temperature range of -55°C~125°C is used for the operating environment. Votage is provided within 3V~18V. Similar parts can be found using the 4000B family. Based on the CD4015 family, you can search for similar parts. In terms of supply voltage, this chip operates within the range of 15V. This part should have a minimum supply voltage (Vsup) of at least 3V. There are 1 input lines available in the device. It runs with a quiescent current of 100μA. CD4015BME4 FeaturesWith 16 pins Mounted in Surface Mount type. Based on CD4015 family Operate supply voltage at 15V Quiescent Current at 100μA CD4015BME4 ApplicationsThere are a lot of Texas Instruments CD4015BME4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD4015BNSR OverviewThis device can be found embedded within the package 16-SOIC (0.209, 5.30mm Width). 16 is the number of terminations on the chip. A Tape & Reel (TR) case is used to pack it. 5V is the operating supply voltage of the part. 2 elements are present in this part. The device is equipped with 16 pins. The recommended mounting method is Surface Mount. Surface Mount is the way this component is mounted. -55°C~125°C is the operating temperature range. During operation, the voltage is within the range of 3V~18V. In this case, the electrical component belongs to the series 4000B. Based on the CD4015 family, you can search for similar parts. It is noted that this chip uses an operating supply voltage of 15V. There should be no less than 3V supply voltage (Vsup) for this part. In this device, there are 1 input lines. CD4015BNSR FeaturesWith 16 pins Mounted in Surface Mount type. Based on CD4015 family Operate supply voltage at 15V CD4015BNSR ApplicationsThere are a lot of Texas Instruments CD4015BNSR Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CY29FCT520CTSOCE4 OverviewThere is a 24-SOIC (0.295, 7.50mm Width) package embedded with the device. 24 is the number of terminations on the chip. The Tube case contains it. Parts with a 5V operating supply voltage are specified. The part consists of 1 elements. 24 pins are available on the device. It is recommended to mount by Surface Mount in order to get the best results. Mounting of this component is indicated by Surface Mount. A temperature range of -40°C~85°C is used for operation. There is a voltage supply within 4.75V~5.5V. The 29FCT series is associated with this electrical component. Similar parts can be found by searching for the CY29FCT520 family. A device capable of delivering voltage at 5V can be used. There is a subcategory of it called DSP Peripherals. CY29FCT520CTSOCE4 FeaturesWith 24 pins Mounted in Surface Mount type. Based on CY29FCT520 family It supplies 5V power CY29FCT520CTSOCE4 ApplicationsThere are a lot of Texas Instruments CY29FCT520CTSOCE4 Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | SY100E141JY-TR OverviewThere is a 28-LCC (J-Lead) package embedded with the device. A Tape & Reel (TR) case holds it. A total of 1 elements are present on this part. The component is positioned in the way of Surface Mount. There is a temperature range of 0°C~85°C. Votage is provided within 4.2V~5.5V. In the 100E series, this electrical component is found. Based on the 100E141 family, you can search for similar parts. SY100E141JY-TR FeaturesMounted in Surface Mount type. Based on 100E141 family SY100E141JY-TR ApplicationsThere are a lot of Microchip Technology SY100E141JY-TR Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | TPIC6596DWR OverviewThere is a 20-SOIC (0.295, 7.50mm Width) package embedded with the device. 20 is the total number of terminations on the chip. The case Tape & Reel (TR) contains it. This part has an operating supply voltage of 5V. The device is equipped with 20 pins. Surface Mount is recommended for mounting. The component is positioned in the way of Surface Mount. A temperature range of -40°C~125°C is used for operation. Votage is provided within 4.5V~5.5V. This electrical component belongs to the TPIC series. Similar parts can be found by searching for the TPIC6596 family. This chip's operating supply voltage is reported as 5V. As far as the device is concerned, there are 1 input lines available. It can deliver voltage at 5V. A total of 9 output lines need to be operated. In its subcategory, it is listed under Peripheral Drivers. TPIC6596DWR FeaturesWith 20 pins Mounted in Surface Mount type. Based on TPIC6596 family Operate supply voltage at 5V It supplies 5V power With 9 output lines TPIC6596DWR ApplicationsThere are a lot of Texas Instruments TPIC6596DWR Shift Registers applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | CD4031BNSR Overview16-SOIC (0.209, 5.30mm Width) is the package in which the device is embedded. There are 16 terminations on the chip. The case Tape & Reel (TR) contains it. 5V is the operating supply voltage of the part. A total of 1 elements are present on this part. It has 16 pins. The mounting method should be Surface Mount. In Surface Mount, this component is mounted. The operating temperature ranges -55°C~125°C. Votage within 3V~18V is supplied. In the 4000B series, this electrical component is found. Based on the CD4031 family, you can search for similar parts. According to the specification, this chip's operating supply voltage falls within the range of 15V. Please take note of the following additional aspects of this section: DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING. Ensure that Vsup is not less than 3V when powering this part. In this device, there are 2 input lines. There are 3 output lines to operate. The subcategory of this item is Shift Registers. CD4031BNSR FeaturesWith 16 pins Mounted in Surface Mount type. Based on CD4031 family Operate supply voltage at 15V With 3 output lines CD4031BNSR ApplicationsThere are a lot of Texas Instruments CD4031BNSR Shift Registers applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
