Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
NXP Semiconductors | PCA9509PGM,125 OverviewThe package is packed in 8-XFQFN Exposed Pad for convenient transportation of power buffer.Currently, this power buffer is available for shipping in Tape & Reel (TR) packages.Easily adaptable Surface Mount universal mouthpiece.As for types, this is your typical Buffer, ReDriver.For the purpose of working, this op amp buffer requires 2.3V~5.5V voltage.It is important to maintain the output quality by cooperating between the 2 channels.As a result, there is a 2-Wire Bus input that is enabled.There should be a setting of -40°C~85°C for the operating temperature in order to avoid any malfunctions.In addition to applications for I2C, this operational amplifier buffer is also intended for other applications.Search with "PCA9509" to find more pin-to-pin solutions.An op amp buffer with 8 terminals can be found on the left side of the op amp buffer.There is a maximum reflow temperature of NOT SPECIFIED for the op amp buffers.This splitter can accomplish a great deal of demanding work when supplied with 1.1V voltage.The pinout of a Power buffer begins with the 8 pins of the Power buffer that it possesses.As far as output is concerned, it is in 2-Wire Bus.5μA op amp buffers, they are. PCA9509PGM,125 Features2 channels. Mainly used in I2C. PCA9509PGM,125 ApplicationsThere are a lot of NXP USA Inc. PCA9509PGM,125 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9514D,118 OverviewThis power buffer comes packaged in 8-SOIC (0.154, 3.90mm Width) so that it can be transported easily.The package is ready for power buffer in Tape & Reel (TR) pieces.Surface Mount Universal mout for easy adaptation.It is important to note that this is a typical Buffer, Accelerator type.For the purpose of working, this op amp buffer requires 2.7V~5.5V voltage.Maintaining output quality requires cooperation between 1 channels.This facilitates 2-Wire Bus input.For optimal performance, set the operating temperature to -40°C~85°C.The operational amplifier buffer is targeted at applications such as I2C - Hotswap and others.There are more pin-to-pin solutions available for your special needs if you search with the letter "PCA9514".There are two 8 terminals on the op amp buffer and you can find them at the end of the op amp buffer.With its 3.3V voltage supply, the splitter can perform many demanding functions that are expected from it.Power buffer pinouts start from 8 pins.This program outputs in 2-Wire Bus.2.8mA op amp buffers, they are. PCA9514D,118 Features1 channels. Mainly used in I2C - Hotswap. PCA9514D,118 ApplicationsThere are a lot of NXP USA Inc. PCA9514D,118 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9510D,118 OverviewAs a convenience to the user, power buffer has been packaged in 8-SOIC (0.154, 3.90mm Width).As of right now, this power buffer can be shipped in Tape & Reel (TR) packages.A universal mout that is easy to adapt.Speaking of types, this is a typical Buffer, ReDriver.For the purpose of working, this op amp buffer requires 2.7V~5.5V voltage.It is important to maintain the output quality by cooperating between the 1 channels.The system facilitates the input of 2-Wire Bus.It is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.In addition to I2C - Hotswap, this operational amplifier buffer may also be used for other applications.To find more pin-to-pin solutions for your special needs, try searching with the letter "PCA9510" in the search box.There is a 8 terminal on the op amp buffer, which can be seen in the picture below.The splitter works with a voltage of 3.3V, so it can be used for various demanding tasks.The pinout of the power buffer starts from 8 pins it has.The output is in the form of 2-Wire Bus.The op amp buffers belong to the 2.8mA family. PCA9510D,118 Features1 channels. Mainly used in I2C - Hotswap. PCA9510D,118 ApplicationsThere are a lot of NXP USA Inc. PCA9510D,118 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9515ADP/G-T OverviewThere are Cut Tape (CT) packages ready for shipping, and this power buffer is in one of them. PCA9515ADP/G-T FeaturesPCA9515ADP/G-T ApplicationsThere are a lot of NXP USA Inc. PCA9515ADP/G-T Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9513DP,118 OverviewThe power buffer package contains 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for ease of transportation.Packaged in Tape & Reel (TR) and ready for power buffer.The Surface Mount universal mout is designed for easy adaptability.As far as types are concerned, this is just a typical Buffer, Accelerator.It uses 2.7V~5.5V voltage for its operation, so it does not require batteries.In order to maintain the output quality, 1 channels cooperate with each other.2-Wire Bus inputs are facilitated.In order to avoid mal-functioning of the system, it is recommended that the operating temperature is set to -40°C~85°C.In addition to I2C - Hotswap, this operational amplifier buffer targets other applications.Search with "PCA9513" to find more pin-to-pin solutions.There is a 8 terminal on the op amp buffer, which can be seen in the picture below.During reflow, it reaches a temperature of 260.The splitter works with a voltage of 3.3V, so it can be used for various demanding tasks.Power buffer pinouts start from 8 pins.2-Wire Bus is the output format.OP amp buffers 2.8mA. PCA9513DP,118 Features1 channels. Mainly used in I2C - Hotswap. PCA9513DP,118 ApplicationsThere are a lot of NXP USA Inc. PCA9513DP,118 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9511D,118 OverviewThis power buffer comes in a convenient 8-SOIC (0.154, 3.90mm Width) package for convenient transportation.There are Tape & Reel (TR) packages available for this power buffer, which means it is ready for shipping.A universal mount that's easy to adapt.A Buffer, Accelerator is a typical type.It works on 2.7V~5.5V voltage.To maintain quality, 1 channels work together.Input is facilitated by 2-Wire Bus.A temperature setting of -40°C~85°C should be set on the operating system to prevent malfunctions.In addition to I2C - Hotswap, this operational amplifier buffer targets other applications.You can also search with "PCA9511" if you want to find more pin-to-pin solutions that meet your special needs.The op amp buffer has 8 terminals.Due to the 3.3V voltage supply, this splitter can handle a multitude of demanding tasks.The pinout of a Power buffer begins with the 8 pins of the Power buffer that it possesses.In terms of output, it outputs in 2-Wire Bus units.There are 6mA op amp buffers in it. PCA9511D,118 Features1 channels. Mainly used in I2C - Hotswap. PCA9511D,118 ApplicationsThere are a lot of NXP USA Inc. PCA9511D,118 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9516AD,112 OverviewSeveral packaging options are available for convenient transportation, including 16-SOIC (0.154, 3.90mm Width).As of right now, this power buffer can be shipped in Tube packages.The Surface Mount universal mout has the advantage of being easily adaptable.Speaking of types, this is a typical Buffer, ReDriver.The op amp buffer uses a voltage of 3V~3.6V volts for its operation.Keeping output quality high requires the cooperation of 5 channels.Hence, it facilitates the entry of 2-Wire Bus into the system.There should be a setting of -40°C~85°C for the operating temperature in order to avoid any malfunctions.Application-specific operational amplifier buffers such as this one are targeted at I2C and other markets.To find pin-to-pin solutions for your specific needs, try searching with "PCA9516A."You can find 16 terminals of the op amp buffer.There is a maximum reflow temperature of 260 for the op amp buffers.Powered by a 2.5V voltage, the splitter is capable of performing many demanding tasks due to its dependable supply.From the 16 pins on the Power buffer, we can see the pinout of the Power buffer.As far as output is concerned, it is in 2-Wire Bus.As the name suggests, they are a 5mA op amp buffers.10-Bit receiver is used.The repeter speciallizes itself in certain areas along with SUPPLY VOLTAGE 3.3 V ALSO POSSIBLE. PCA9516AD,112 Features5 channels. Mainly used in I2C. 10-Bit receiver. SUPPLY VOLTAGE 3.3 V ALSO POSSIBLE. PCA9516AD,112 ApplicationsThere are a lot of NXP USA Inc. PCA9516AD,112 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | PCA9514DP,118 OverviewA convenient transport package is provided in the power buffer of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Ready for shipping in Tape & Reel (TR) package.There is a universal mout that makes it easy to adapt to various situations.Type-wise, this is a Buffer, Accelerator.In order to function, this op amp buffer requires 2.7V~5.5V voltage.In order to maintain a high standard of output, 1 channels cooperate together.There is 2-Wire Bus input facilitation.It is recommended that the operating temperature is set to -40°C~85°C to prevent malfunctions.It is designed for use by I2C - Hotswap as well as other applications.Search with "PCA9514" to get more pin-to-pin solutions.There is a 8 terminal on the op amp buffer, which can be seen in the picture below.This splitter can be used for the completion of many demanding tasks as it is supplied by 3.3V voltage.Power buffer pinouts start from 8 pins.2-Wire Bus is what it outputs as the output format.The op amp buffers belong to the 2.8mA family. PCA9514DP,118 Features1 channels. Mainly used in I2C - Hotswap. PCA9514DP,118 ApplicationsThere are a lot of NXP USA Inc. PCA9514DP,118 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVDS18DRFRG4 OverviewThis power buffer comes packaged in 8-WFDFN Exposed Pad so that it can be transported easily.There are Tape & Reel (TR) packages ready for shipping, and this power buffer is in one of them.There is a universal mout that makes it easy to adapt to various situations.A Buffer, ReDriver is a typical type.2.375V~3.6V voltage is used to power this op amp buffer.As a result, 1 channels collaborate to maintain output quality.Hence, it facilitates the entry of PECL into the system.It is recommended that the operating temperature is set to -40°C~85°C to prevent malfunctions.In order to find more pin-to-pin solutions that meet your special needs, you can search with "65LVDS18".There are 8 terminals on the op amp buffer.This splitter can be used for the completion of many demanding tasks as it is supplied by 2.5V voltage.Pinouts of a power buffer start from the 8 pins.The output of this program is in LVDS format.For mounting on PCBs or other boards, there is a Surface Mount.In the industry, Other Interface ICs's such as this power buffer have an important role to play.This power buffer operates from a voltage of 36mA.Power supplies of type 2.5/3.3V are sufficient to run the repeters. SN65LVDS18DRFRG4 Features1 channels. A standard Other Interface ICs. SN65LVDS18DRFRG4 ApplicationsThere are a lot of Texas Instruments SN65LVDS18DRFRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVDM22DR OverviewAs a convenience to the user, power buffer has been packaged in 16-SOIC (0.154, 3.90mm Width).Currently available in Tape & Reel (TR) packages for power buffer.The Surface Mount universal mout is designed for easy adaptability.As a matter of fact, this type is typical of the Buffer, Multiplexer type.For the purpose of working, this op amp buffer requires 3V~3.6V voltage.In order to maintain a high standard of output, 1 x 2:2 channels cooperate together.For optimal performance, set the operating temperature to -40°C~85°C.To find more pin-to-pin solutions, search with "65LVDM22".There is a 16 terminal on the op amp buffer, which can be seen in the picture below.There is a peak reflow temperature of NOT SPECIFIED for this power buffer.It is capable of completing a wide range of tasks with the 3.3V voltage supplied.Power buffer pinouts begin with 16 pins.In the output, LVDS is used.There are 16 pins on it.It is mounted on PCBs or other boards using a Surface Mount.The power buffer is powered by 27mA voltage.The voltage required for normal operation is 3.3V.A nominal supply current of 27mA is required for normal use of the splitter.A 2 receiver is implemented in this repeater signal. SN65LVDM22DR Features1 x 2:2 channels. SN65LVDM22DR ApplicationsThere are a lot of Texas Instruments SN65LVDM22DR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVDM22DG4 OverviewThere is a packaging of 16-SOIC (0.154, 3.90mm Width) for convenient transport of the power buffer.The package is ready for power buffer in Tube pieces.A universal mout that can be easily adapted to fit any person.In terms of types, this is a typical Buffer, Multiplexer.There is no voltage involved in the operation of this op amp buffer.For the output quality to be maintained, 1 x 2:2 channels work together.In order to prevent malfunctions, the operating temperature should be set to -40°C~85°C.To find more pin-to-pin solutions, search with "65LVDM22".An op amp buffer with 16 terminals can be found on the left side of the op amp buffer.Reflow temperature at its peak is calculated to be 260.As long as the splitter is supplied with 3.3V voltage, it can perform a wide range of demanding tasks.It starts with the 16 pins of the Power buffer in order to determine the pinout of the Power buffer.Output is expressed in LVDS.The 16 pins are on it.A Surface Mount hole allows it to be mounted on a PCB or other board.In order for this power buffer to operate, a voltage of 27mA must be applied.During normal operation, 3.3V operating voltage is required.Normal use of the splitter requires 27mA as the nominal supply current.The repeater signal implements 2 receivers. SN65LVDM22DG4 Features1 x 2:2 channels. SN65LVDM22DG4 ApplicationsThere are a lot of Texas Instruments SN65LVDM22DG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVP17DRFR OverviewThe power buffer package contains 8-WFDFN Exposed Pad for ease of transportation.It has been packaged in Tape & Reel (TR) packages and is ready for power buffer.A universal mounting system for easy adaptation.In terms of types, this is a typical Buffer, ReDriver.2.375V~3.6V voltage is used to power this op amp buffer.PECL inputs can be facilitated by it.As a precaution, it is recommended that you set the operating temperature to -40°C~85°C in order to avoid malfunctioning.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "65LVP17".The op amp buffer has 8 terminals.It is a splitter that can accomplish a wide range of demanding tasks with power supplied by 2.5V voltage.From the 8 pins on the Power buffer, we can see the pinout of the Power buffer.Depending on the input, it will output in LVPECL.With 8 pins, it is connected.This board has a Surface Mount hole for mounting on a PCB or other board.Other Other Interface ICs like the power buffer play a important role in the industry.This power buffer operates from a voltage of 48mA.Power supplies of type 2.5/3.3V are sufficient to run the repeters.Receiver 1 is implemented in this repeater signal.IT ALSO OPERATES AT 3.3 V SUPPLY works in certain areas, while repeter specializes in others. SN65LVP17DRFR FeaturesA standard Other Interface ICs. IT ALSO OPERATES AT 3.3 V SUPPLY. SN65LVP17DRFR ApplicationsThere are a lot of Texas Instruments SN65LVP17DRFR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVDS22DG4 OverviewA convenient transport package is provided in the power buffer of a 16-SOIC (0.154, 3.90mm Width).Currently, this power buffer is available for shipping in Tube packages.The Surface Mount universal mout has the advantage of being easily adaptable.A typical Buffer, Multiplexer is this.3V~3.6V voltage is used to power this op amp buffer.In order for the output quality to be maintained, 1 x 2:2 channels must work together.Hence, it facilitates the entry of LVDS into the system.To avoid malfunctioning, the operating temperature should be set to -40°C~85°C.There are more pin-to-pin solutions available for your special needs if you search with the letter "65LVDS22".The op amp buffer has 16 terminals.It reaches its peak reflow temperature at 260 degrees Celsius.It is capable of completing a wide range of tasks with the 3.3V voltage supplied.From the power buffer's 16 pins, we can determine its pinout.16 pins are present on the op amp buffers.For mounting on PCBs or other boards, it has a Surface Mount.Voltage 20mA is needed to operate this power buffer.For normal operation, 3.3V voltage is required.A nominal supply current of 20mA is required for normal use of the splitter.In this repeater signal, 2 receivers are implemented. SN65LVDS22DG4 Features1 x 2:2 channels. SN65LVDS22DG4 ApplicationsThere are a lot of Texas Instruments SN65LVDS22DG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN75178BPSRE4 OverviewThe power buffer package contains 8-SOIC (0.209, 5.30mm Width) for ease of transportation.Power buffer is ready to ship in a package of Tape & Reel (TR).Surface Mount A universal mout for easy adaptation to a wide range of heads.Speaking of types, this is a typical Buffer, ReDriver.There is 4.75V~5.25V voltage used to power this op amp buffer. It works on 4.75V~5.25V voltage.It is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.The operational amplifier buffer targets RS422, RS485 applications and others.In order to find more pin-to-pin solutions that will fit your specific needs, try typing "SN75178" in the search box.As you can see in the picture, the op amp buffer has 8 terminals.During reflow, the peak temperature of the material is determined by the number NOT SPECIFIED.The splitter is supplied with 5V voltage, so it is capable of completing a wide range of demanding tasks.Taking the Power buffer's pinout as an example, it starts from the 8 pins it has on its surface.With 8 pins, it is connected.It has a Surface Mount for mouting on PCB or other boards.The power buffer plays an important role in the industry, along with other Line Driver or Receivers.A voltage of 70mA is required to operate this power buffer.During normal operation, 5V operating voltage is required.In order to run the repeters, two 5V power supplies are sufficient.A nominal supply current of 57mA is required for normal use of the splitter.1 receivers are implemented in this repeater signal.Aside from POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS, the repeter is also specialized in certain areas. SN75178BPSRE4 FeaturesMainly used in RS422, RS485. A standard Line Driver or Receivers. POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS. SN75178BPSRE4 ApplicationsThere are a lot of Texas Instruments SN75178BPSRE4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVP19DRFRG4 OverviewFor convenience, power buffer comes packaged in 8-WFDFN Exposed Pad.Ready for shipping in Tape & Reel (TR) package.A universal mout that is easy to adapt.In terms of types, this is a typical Buffer, ReDriver.The op amp buffer uses a voltage of 2.375V~3.6V volts for its operation.It is important for 1 channels to work together in order to maintain the output quality at all times.PECL input is enabled.In order to prevent malfunctions, the operating temperature should be set to -40°C~85°C.You can get more pin-to-pin solutions for your specific needs by searching with "65LVP19".There are 8 terminals on the op amp buffer.As the splitter is supplied with a 2.5V voltage, it is able to perform a wide range of demanding tasks.There are 8 pins on the Power buffer, which corresponds to the pinout of the Power buffer.As far as output is concerned, it is in LVPECL.A mounting hole is provided for mounting on PCBs and other boards.In addition to the power buffer, other Other Interface ICs also play an important role.36mA is the voltage that this power buffer operates on.The repeters can be run using 2.5/3.3V power supplies. SN65LVP19DRFRG4 Features1 channels. A standard Other Interface ICs. SN65LVP19DRFRG4 ApplicationsThere are a lot of Texas Instruments SN65LVP19DRFRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | SY89306VMG-TR OverviewFor convenience, power buffer comes packaged in 8-VFDFN Exposed Pad, 8-MLF?.Packaged in Tape & Reel (TR) ready for power buffer.An easy-to-adapt universal mount.As far as types go, this is a typical Buffer, ReDriver.There is 3V~5.5V voltage used by this op amp buffer.As a result, 1 channels work together to maintain the quality of output.There is ECL input facilitation.For the operational amplifier buffer to function properly, the operating temperature should be set to -40°C~85°C.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "SY89306".An op amp buffer of the op amp buffer is equipped with 8 terminals.Reflow temperature is 260 at its peak.With its 3.3V voltage supply, the splitter can perform many demanding functions that are expected from it.The 8 pins are on it.It has a Surface Mount for mouting on PCB or other boards.It operates at a voltage of 48mA.The repeter utilizes a 1-Bit receiver.It comes from Precision Edge?.Splitters should have a nominal supply current of 48mA for normal operation.In addition to ALSO OPERATES AT 5V SUPPLY AND VEE =-3.3, VCC=0, the repeter has specialties in certain areas. SY89306VMG-TR Features1 channels. 1-Bit receiver. ALSO OPERATES AT 5V SUPPLY AND VEE =-3.3, VCC=0. SY89306VMG-TR ApplicationsThere are a lot of Microchip Technology SY89306VMG-TR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVDS18DRFR OverviewPackaged in 8-WFDFN Exposed Pad for power buffer easy transportation.There are Tape & Reel (TR) packages ready for shipping, and this power buffer is in one of them.Adaptable universalism in a single mout.It is a typical Buffer, ReDriver type, if we are talking about types.This op amp buffer uses 2.375V~3.6V voltage for work.A total of 1 channels cooperate to ensure high-quality output.PECL input is enabled.For optimal performance, set the operating temperature to -40°C~85°C.With "65LVDS18," you will find more pin-to-pin solutions.8 terminals are on the op amp buffer.The splitter is able to perform many demanding tasks when provided with 2.5V voltage.There are 8 pins on the Power buffer, which corresponds to the pinout of the Power buffer.LVDS capacitance for the input.8 pins are present on the op amp buffers.The Surface Mount on the board allows it to be mounted on PCBs or other boards.Power buffers like this one play a critical role in the industry.36mA is the voltage that this power buffer operates on.Power supplies of type 2.5/3.3V are sufficient to run the repeters.400μA should be the current output from the spliter. SN65LVDS18DRFR Features1 channels. A standard Other Interface ICs. SN65LVDS18DRFR ApplicationsThere are a lot of Texas Instruments SN65LVDS18DRFR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVDS100DGKRG4 OverviewSeveral packaging options are available for convenient transportation, including 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).In a package of Tape & Reel (TR) it is ready for power buffer.An easy-to-adjust universal mout is included with the Surface Mount.It is a typical Buffer, ReDriver type, if we are talking about types.In order to function, this op amp buffer requires 3V~3.6V voltage.This facilitates CML, LVDS, LVPECL input to the system.A temperature setting of -40°C~85°C should be set on the operating system to prevent malfunctions.There are more pin-to-pin solutions available for your special needs if you search with the letter "65LVDS100".An op amp buffer with 8 terminals can be found.During reflow, the peak temperature of the material is determined by the number 260.Powered by a 3.3V voltage, the splitter is capable of performing many demanding tasks due to its dependable supply.A Power buffer's pinout begins with its 8 pins.LVDS is what it outputs as the output format.The 8 pins are on it.This board has a Surface Mount hole for mounting on a PCB or other board.In the industry, other Line Driver or Receiverss play an important role, such as the power buffer.This power buffer operates from a voltage of 30mA.During normal operation, 3.3V operating voltage is required.Using 1-Bits as the receiver, it transmits data.Power dissipation of this splitter is at most 377mW watts.A 1 element interface repeater signal is what we are dealing with here.As of right now, the spliter should be displaying 12μA as its output. SN65LVDS100DGKRG4 FeaturesA standard Line Driver or Receivers. 1-Bit receiver. SN65LVDS100DGKRG4 ApplicationsThere are a lot of Texas Instruments SN65LVDS100DGKRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | PCA9515AP OverviewFor convenience, power buffer comes packaged in 8-DIP (0.300, 7.62mm).It has been packaged into Tube packages, so power buffer is ready to be shipped.An easy-to-adjust universaal mout for easy adjustability.Here's a typical Buffer, ReDriver.In order to function, this op amp buffer requires 2.3V~3.6V voltage.It is important that the 1 channels cooperate in order to maintain a high level of output.Input is facilitated by 2-Wire Bus.It is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.It is aimed at applications related to the I2C and other areas.In order to find more pin-to-pin solutions that will fit your specific needs, try typing "CA9515" in the search box.8 terminals are located on the op amp buffer.It is capable of completing a wide range of tasks with the 3V voltage supplied.It starts with the 8 pins of the Power buffer in order to determine the pinout of the Power buffer.The output is in 2-Wire Bus.There are 8 pins on it.A Through Hole hole is available for mounting it on a PCB or another board.Other Line Driver or Receivers like the power buffer play a important role in the industry.500μA is the voltage that this power buffer operates on.It supports 2 outputs in total. PCA9515AP Features1 channels. Mainly used in I2C. A standard Line Driver or Receivers. 2 outputs. PCA9515AP ApplicationsThere are a lot of Texas Instruments PCA9515AP Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVDS19DRFRG4 OverviewFor ease of transportation, the power buffer is packaged in 8-WFDFN Exposed Pad.There are Tape & Reel (TR) packages ready for shipping, and this power buffer is in one of them.The Surface Mount universal mout allows for easy adaptability to a variety of situations.As far as types are concerned, this is just a typical Buffer, ReDriver.The op amp buffer uses a voltage of 2.375V~3.6V volts for its operation.It is important to maintain the output quality by cooperating between the 1 channels.PECL inputs are facilitated.It is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.In order to find more pin-to-pin solutions that suit your specific needs, try searching with "65LVDS19".As you can see in the picture, the op amp buffer has 8 terminals.The splitter works with a voltage of 2.5V, so it can be used for various demanding tasks.This power buffer has 8 pins as its pinout.LVDS is the output unit.In addition to the Surface Mount axis, it has a female hole for mounting to PCBs or other boards.The power buffer and other Other Interface ICs play an important role in the industry.There is a voltage of 36mA which is used to power this power buffer.The repeters can be run using 2.5/3.3V power supplies. SN65LVDS19DRFRG4 Features1 channels. A standard Other Interface ICs. SN65LVDS19DRFRG4 ApplicationsThere are a lot of Texas Instruments SN65LVDS19DRFRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVP16DRFRG4 OverviewPackaged in 8-WFDFN Exposed Pad, power buffer can be easily transported.It has been packaged into Tape & Reel (TR) packages, so power buffer is ready to be shipped.An easy-to-adjust universal mout is included with the Surface Mount.As for types, this is an example of a typical Buffer, ReDriver.For the purpose of working, this op amp buffer requires 2.375V~3.6V voltage.It is important for 1 channels to work together in order to maintain the output quality at all times.Input of PECL is enabled by it.To make sure that the cooling system does not malfunction, you should set the operating temperature to -40°C~85°C.Using "65LVP16" will give you more solutions for your unique needs.An op amp buffer of the op amp buffer is equipped with 8 terminals.It is a splitter that can accomplish a wide range of demanding tasks with power supplied by 2.5V voltage.There are 8 pins on the Power buffer, which corresponds to the pinout of the Power buffer.In terms of output, it outputs in LVPECL units.In addition, it has 8 pins.A Surface Mount hole is available for mounting it on a PCB or another board.In addition to the power buffer, other Other Interface ICs also play an important role.48mA is the voltage at which this power buffer operates.Power supplies of type 2.5/3.3V are sufficient to run the repeters.Both repeter and IT ALSO OPERATES AT 3.3 V SUPPLY specialize in certain areas. SN65LVP16DRFRG4 Features1 channels. A standard Other Interface ICs. IT ALSO OPERATES AT 3.3 V SUPPLY. SN65LVP16DRFRG4 ApplicationsThere are a lot of Texas Instruments SN65LVP16DRFRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
TE Connectivity ALCOSWITCH Switches | Rotary Encoder 24 Vertical |
4451
In-stock
|
Get Quote | |||
Bourns Inc. | Rotary Encoder |
6475
In-stock
|
Get Quote | |||
Bourns Inc. | Rotary Encoder |
5828
In-stock
|
Get Quote | |||
Bourns Inc. | Rotary Encoder |
9034
In-stock
|
Get Quote | |||
Bourns Inc. | Rotary Encoder |
5030
In-stock
|
Get Quote | |||
Bourns Inc. | Rotary Encoder |
4293
In-stock
|
Get Quote | |||
Bourns Inc. | Rotary Encoder |
4619
In-stock
|
Get Quote | |||
Bourns Inc. | Rotary Encoder |
2169
In-stock
|
Get Quote | |||
Bourns Inc. | Rotary Encoder |
6916
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.