My Cart
Total:0Sub-Total : $0.00
STM1061N16WX6F STM1061N16WX6F

761-STM1061N16WX6F

Manufacturer:

STMicroelectronics

Product Number:

761-STM1061N16WX6F

Description:

STM1061N16WX6F Overview


There are 3 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to

Datasheet:

STM1061N16WX6F

Description:

STM1061N16WX6F Overview


There are 3 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. It is recommended that Vsup should not be less than 700mV for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type for IC management is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 3.6μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to STM1061, which is the base power ics number. A maximum supply temperature of 3.6μA can be used with this power management.

STM1061N16WX6F Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current

STM1061N16WX6F Applications


There are a lot of STMicroelectronics STM1061N16WX6F Voltage Supervisors applications.

  • Automotive permanent magnet synchronous motors
  • Smart meter
  • Rechargeable batteries
  • Unattended substation automation
  • Detection of phase loss
  • Set top box
  • Utility meter
  • Detection of phase imbalance
  • Telecommunications equipment
  • Power distribution systems of operating room


Quantity:

Payment Methods:

Delivery Services:

In Stock

Please send RFQ , we will respond immediately.

certificate certificate certificate certificate certificate
STM1061N16WX6F information

Specifications
ACL Staticide Inc STM1061N16WX6F technical specifications, attributes, parameters and parts with similar specifications to ACL Staticide Inc STM1061N16WX6F
  • Type
    Parameter
  • Factory Lead Time
    12 Weeks
  • Lifecycle Status
    ACTIVE (Last Updated: 7 months ago)
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    TO-236-3, SC-59, SOT-23-3
  • Number of Pins
    3
  • Operating Temperature
    -40°C~85°C TA
  • Packaging
    Tape & Reel (TR)
  • JESD-609 Code
    e3
  • Part Status
    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    3
  • ECCN Code
    EAR99
  • Type
    Simple Reset/Power-On Reset
  • Terminal Finish
    Matte Tin (Sn) - annealed
  • Subcategory
    Power Management Circuits
  • Max Power Dissipation
    320mW
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Terminal Pitch
    0.96mm
  • Time@Peak Reflow Temperature-Max (s)
    30
  • Base Part Number
    STM1061
  • Output
    Open Drain or Open Collector
  • Pin Count
    3
  • Number of Channels
    1
  • Max Supply Voltage
    6V
  • Min Supply Voltage
    700mV
  • Operating Supply Current
    3.6μA
  • Nominal Supply Current
    3.6μA
  • Power Dissipation
    320mW
  • Max Supply Current
    3.6μA
  • Adjustable Threshold
    NO
  • Watchdog Timer
    No
  • Reset
    Active Low
  • Voltage - Threshold
    1.6V
  • Number of Voltages Monitored
    1
  • Reset Timeout
    30μs Typical Propagation Delay
  • Min Reset Threshold Voltage
    1.568V
  • Max Reset Threshold Voltage
    1.632V
  • Threshold Voltage
    +1.6V
  • Undervoltage Threshold
    1.568V
  • Overvoltage Threshold
    1.632V
  • Height
    1.02mm
  • Length
    3.04mm
  • Width
    1.4mm
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Purchase and inquiry

Purchase & Inquiry
Transport
Purchase

You may place an order without registering to ShineEver.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.