815-TPS51117PWR

Manufacturer:

Ultralife

Product Number:

815-TPS51117PWR

Description:

TPS51117PWR Overview

Capsuled in the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. For outputs of 1, this dc motor controller is suitable.

Datasheet:

-

Description:

TPS51117PWR Overview

Capsuled in the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. For outputs of 1, this dc motor controller is suitable. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. dc controls with 4.5V~5.5V voltage are supplied and operated. Worked in a -40°C~85°C TA dc switcher before. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, On Time Control, Power Good. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 14 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 5V. Searching "TPS51117" will return other relevant dc to dc converter ics. 14 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 5.5V. In most cases, the dc dc regulator's output current is 10A. This information should be noted when you begin working with the component. 550kHz is the maximum frequency of this dc regulators. DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V to better satisfy the need. When running the voltage regulator dc to dc in a circuit, users should apply 5.5V to ensure safety and reliability. The dc to dc voltage regulator belongs to the D-CAP? series. As long as the dc switching is in a dormant state, it utilizes 400μA. The maximum input voltage of dc switcher is 28V, so users should limit their voltage accordingly. 1.8V is the required supply voltage. DC switcher will not be able to provide an output current above 10A volts. Datasheets state the switching converter can output up to 5.5V volts. Lowest voltage output of the voltage controller must be greater than 760mV.

TPS51117PWR Features

Transistor Driver Outputs
Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V

TPS51117PWR Applications

There are a lot of Texas Instruments TPS51117PWR DC to DC converter applications.

• Low output voltage switching power supply circuits
• seismic instrument power circuits
• Motor controller circuits
• Computer rooms
• Product burn-in
• Digital video recorders
• Automation technology
• Flexible manufacturing cells
• Pipe bending machines
• Lathes