815-TPS53129RGET

Manufacturer:

Ultralife

Product Number:

815-TPS53129RGET

Description:

TPS53129RGET Overview

With its 24-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. dc motor controller is suitable for 2 output generation. PMIC i

Datasheet:

TPS53129RGET

Description:

TPS53129RGET Overview

With its 24-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. dc motor controller is suitable for 2 output generation. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 4.5V~24V. A -40°C~85°C TA dc switcher is not a problem. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Current Limit, Enable, Soft Start for efficient switching control. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. The 24 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. 5.5V nominal DC switcher's voltage input. Search for "TPS53129" to find other relevant dc to dc converter ics. In total, switching converter has 24 pins. As determined by the test statistics, the output voltage of DC regulator is 5.5V. In most cases, the dc dc regulator's output current is 15A. This information should be noted when you begin working with the component. It is estimated that this dc regulatorhas a maximum frequency of 700kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 24V. D-CAP2? is a series of dc to dc voltage regulator. During dormancy, the dc switching uses 450μA. In order to ensure the dc switcher's functionality, users must limit the voltage to 24V due to the dc switcher's maximum input voltage. 4.5V is the required supply voltage. There will be 15A current output from the dc switcher above 15A. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. There is 760mV voltage output lower than 760mV on the voltage controller.

TPS53129RGET Features

Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION

TPS53129RGET Applications

There are a lot of Texas Instruments TPS53129RGET DC to DC converter applications.

• Constant current circuits
• Sink circuits
• Solar power plants
• Low output voltage switching power supply circuits
• Power supplies of electronic gadgets
• Current source circuits
• Surface processing equipment
• Plate bending machines
• Scientific research
• Product testing